Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3

[greyworld]

(details)

And inform us once you finish the payment ,thanks for your understanding in advance.
Thank you for your understanding and cooperation.
Regards,
Chita
Bitmain

I already sent it and I hope that my order will be finaly marked as paid. Good luck to all. 

Hey that's fantastic!  I got an email from their support today too telling me my order should be marked paid and confirmed.  It wasn't, but apparently they're working on it, which is encouraging.

[1713919370]

1713919370

[lentyna]

I have these NEMA 10-30 wall sockets, but I cannot find any adaptor from C13 to NEMA 10-30.

Use a PDU like the person above you suggested even if you have one asic miner now assume in time you will have more and the PDU will be well used. After my office is converted into a mining operation I'll do a guide and walk through to help new people.

The cheapest I found is this:

https://www.amazon.com/CyberPower-PDU30BHVT8R-8-Outlets-L6-30P-Distribution/dp/B003KBIEGS/ref=sr_1_7?s=electronics&ie=UTF8&qid=1503470158&sr=1-7&keywords=Power+Distribution+Unit+30A

Would this work?

I have 30 A breakers so I assume I could plug 4 D3s to one of these?

[thesavoyard]

I have these NEMA 10-30 wall sockets, but I cannot find any adaptor from C13 to NEMA 10-30.

Use a PDU like the person above you suggested even if you have one asic miner now assume in time you will have more and the PDU will be well used. After my office is converted into a mining operation I'll do a guide and walk through to help new people.

The cheapest I found is this:

https://www.amazon.com/CyberPower-PDU30BHVT8R-8-Outlets-L6-30P-Distribution/dp/B003KBIEGS/ref=sr_1_7?s=electronics&ie=UTF8&qid=1503470158&sr=1-7&keywords=Power+Distribution+Unit+30A

Would this work?

I have 30 A breakers so I assume I could plug 4 D3s to one of these?

If it's 240 volts then yes. I think those are 240 volts in the US as well to run appliances.

[thiec]

(details)

And inform us once you finish the payment ,thanks for your understanding in advance.
Thank you for your understanding and cooperation.
Regards,
Chita
Bitmain

I already sent it and I hope that my order will be finaly marked as paid. Good luck to all. 

Hey that's fantastic!  I got an email from their support today too telling me my order should be marked paid and confirmed.  It wasn't, but apparently they're working on it, which is encouraging.

Glad to hear that. Bitmain's "MANUAL WORK" should be changed and get match with their sales.

[Tai_Pan]

Instead of ROI and difficulty and scams I am most intrigued at the moment about Bitmain's competitors.....:

-will they deliver

-when will they deliver

-the specs will be as advertised

-will we find comparison tables and stuff online

-what would be the lifespan of the hardware
.....and so on.

Of course I am talking about  innosilicon, pinidea and ibelink

[CryptoCrane]

I have these NEMA 10-30 wall sockets, but I cannot find any adaptor from C13 to NEMA 10-30.

Use a PDU like the person above you suggested even if you have one asic miner now assume in time you will have more and the PDU will be well used. After my office is converted into a mining operation I'll do a guide and walk through to help new people.

The cheapest I found is this:

https://www.amazon.com/CyberPower-PDU30BHVT8R-8-Outlets-L6-30P-Distribution/dp/B003KBIEGS/ref=sr_1_7?s=electronics&ie=UTF8&qid=1503470158&sr=1-7&keywords=Power+Distribution+Unit+30A

Would this work?

I have 30 A breakers so I assume I could plug 4 D3s to one of these?

If it's 240 volts then yes. I think those are 240 volts in the US as well to run appliances.

Wait - that looks like the CyberPower PDU I linked you earlier, which has Nema L6-30 plugs. I don't think that will fit into a Nema 10-30 socket. To use that PDU, you will need an adapter like this one or like this one.

[digital$]

guys, regarding payment to "bitmain" please advise:

wire transfer of USD on 21st Aug(this week monday)  now i do understand these payments have to be made manually so not expecting a 24h/48r turnaround confirmation..so how many days/week should i leave it before logging a support ticket(sales query)?    
when logging into BM site under my account/sales order i see the have updated status to "paying/unshipped/valid"

[manav24]

guys, regarding payment to "bitmain" please advise:

wire transfer of USD on 21st Aug(this week monday)  now i do understand these payments have to be made manually so not expecting a 24h/48r turnaround confirmation..so how many days/week should i leave it before logging a support ticket(sales query)?    
when logging into BM site under my account/sales order i see the have updated status to "paying/unshipped/valid"

wait for a week atleast,
 I paid for order on 25th july and after lot of tickets and run around they confirmed today that they received my money on 27th july.

[digital$]

thanks for reply...will do!!

[Ryancope123]

Out of interest is anything exciting due to happen to the DASH currency? certain press releases etc changes to the blockchain etc?

[Searing]

Out of interest is anything exciting due to happen to the DASH currency? certain press releases etc changes to the blockchain etc?

wait till end of sept and oct when all the hash hits..that will be an interesting moon ride straight up on difficulty and a base jump with parachute for price in
the other direction imho...gonna be ugly (tell me I'm wrong..hold me...make fake promises..... ack!)

[enta2k]

Guys, just to be shure.

So you can easy calculate profits of the miners and at this point, almost no matter how high you electricity costs are,
D4 and L3+ are like little goldmines.
Is there any reason not to purchase let´s say a D4 from Bitmain directly if you can get a hold of it?

I mean month ago people said uuuuh don´t buy a L3+, until it´s delivered the difficulty is so high it wont
achieve ROI ever and If I calculate it with todays data it´s still hella profitable.

My real question is, is there any reason not to buy a D4 if I could get one?
Even If you wouldn´t mine, some shops and ebay offer them for 5000€ in my country, seems like easy money.

Is Bitmain delivering everything or do people loose their money on a regular basis?

[Searing]

Guys, just to be shure.

So you can easy calculate profits of the miners and at this point, almost no matter how high you electricity costs are,
D4 and L3+ are like little goldmines.
Is there any reason not to purchase let´s say a D4 from Bitmain directly if you can get a hold of it?

I mean month ago people said uuuuh don´t buy a L3+, until it´s delivered the difficulty is so high it wont
achieve ROI ever and If I calculate it with todays data it´s still hella profitable.

My real question is, is there any reason not to buy a D4 if I could get one?
Even If you wouldn´t mine, some shops and ebay offer them for 5000€ in my country, seems like easy money.

Is Bitmain delivering everything or do people loose their money on a regular basis?

the 5 companies dumping equip all at the same time on a network where 900mh was a big miner

now you have 30gh,15gh,10gh,17gh.2gh all hitting at the same time.most doing ONLY x11 coins

10x to 15x the difficulty is gonna slap down these miners hard esp in October imho

again hope I am completely wrong ...but part of the reason bitmain is kicking its stock out asap.....I don't think they expected this either so toaster city at 5x the speed
out the door

[enta2k]

Yeah it´s hard to tell, I totally get the argumentation, but on the other hand is there a steady increase in coin value for most of them.
With the L3+ example, the difficulty didn´t kill the efficiency.
Even in Germany where you have to sell your soul for elecitricity, at this moment you still would get ROI within 30days.

I don´t say I´ll buy one If I could within the next charge, because I think now it´s unlikely to be profitable when it arrives in Nov,
but if I could manage to get one from a new product line in the first charge, I think I most definitely would go for it.

[Longsnowsm]

Guys, just to be shure.

So you can easy calculate profits of the miners and at this point, almost no matter how high you electricity costs are,
D4 and L3+ are like little goldmines.
Is there any reason not to purchase let´s say a D4 from Bitmain directly if you can get a hold of it?

I mean month ago people said uuuuh don´t buy a L3+, until it´s delivered the difficulty is so high it wont
achieve ROI ever and If I calculate it with todays data it´s still hella profitable.

My real question is, is there any reason not to buy a D4 if I could get one?
Even If you wouldn´t mine, some shops and ebay offer them for 5000€ in my country, seems like easy money.

Is Bitmain delivering everything or do people loose their money on a regular basis?

the 5 companies dumping equip all at the same time on a network where 900mh was a big miner

now you have 30gh,15gh,10gh,17gh.2gh all hitting at the same time.most doing ONLY x11 coins

10x to 15x the difficulty is gonna slap down these miners hard esp in October imho

again hope I am completely wrong ...but part of the reason bitmain is kicking its stock out asap.....I don't think they expected this either so toaster city at 5x the speed
out the door

You forgot the new 22gh iBelink in that list... LOL

[lentyna]

I have these NEMA 10-30 wall sockets, but I cannot find any adaptor from C13 to NEMA 10-30.

Use a PDU like the person above you suggested even if you have one asic miner now assume in time you will have more and the PDU will be well used. After my office is converted into a mining operation I'll do a guide and walk through to help new people.

The cheapest I found is this:

https://www.amazon.com/CyberPower-PDU30BHVT8R-8-Outlets-L6-30P-Distribution/dp/B003KBIEGS/ref=sr_1_7?s=electronics&ie=UTF8&qid=1503470158&sr=1-7&keywords=Power+Distribution+Unit+30A

Would this work?

I have 30 A breakers so I assume I could plug 4 D3s to one of these?

If it's 240 volts then yes. I think those are 240 volts in the US as well to run appliances.

Wait - that looks like the CyberPower PDU I linked you earlier, which has Nema L6-30 plugs. I don't think that will fit into a Nema 10-30 socket. To use that PDU, you will need an adapter like this one or like this one.

Yeah, I did not find any cables from NEMA 10-30P to PDU so I'm thinking cheaper would be to replace NEMA 10-30P to L6-30R so I don't have to use the adapter:

[zamans98]

my pool group buy of Ibelink D11 confirming that they will received their unit by 30th August 2017.

one of them is selling to me for $8000, ready stock when he gets it by month end.

still thinking if that is a good buy until i get my unit in mid OCTOBER

[Longsnowsm]

my pool group buy of Ibelink D11 confirming that they will received their unit by 30th August 2017.

one of them is selling to me for $8000, ready stock when he gets it by month end.

still thinking if that is a good buy until i get my unit in mid OCTOBER

Well that would give you a 2 weeks jump start on the D3's.  You could probably realistically get 4k back in the first month, and then it will decline pretty quickly from there, but probably could still ROI in 90 days.  So probably still doable if you decided to grab it. 

Only thing I would mention is the DM11G appears to be very temperature sensitive so you will want to make sure you have it in a climate controlled environment.

[crackfoo]

my pool group buy of Ibelink D11 confirming that they will received their unit by 30th August 2017.

one of them is selling to me for $8000, ready stock when he gets it by month end.

still thinking if that is a good buy until i get my unit in mid OCTOBER

Well that would give you a 2 weeks jump start on the D3's.  You could probably realistically get 4k back in the first month, and then it will decline pretty quickly from there, but probably could still ROI in 90 days.  So probably still doable if you decided to grab it.  

Only thing I would mention is the DM11G appears to be very temperature sensitive so you will want to make sure you have it in a climate controlled environment.

If your curious how the returns are for iBelink 11G I have it running on my pool and you can see the stats here:

http://www.zpool.ca/?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRH

The downtimes are from me turning it off as the wife hates the noise when we're watching TV. It is way noisier than the Baikal giants but of course they are only 900mh

I'll post the addresses for the D3's I have coming in Sept when I get them online

[Longsnowsm]

my pool group buy of Ibelink D11 confirming that they will received their unit by 30th August 2017.

one of them is selling to me for $8000, ready stock when he gets it by month end.

still thinking if that is a good buy until i get my unit in mid OCTOBER

Well that would give you a 2 weeks jump start on the D3's.  You could probably realistically get 4k back in the first month, and then it will decline pretty quickly from there, but probably could still ROI in 90 days.  So probably still doable if you decided to grab it.  

Only thing I would mention is the DM11G appears to be very temperature sensitive so you will want to make sure you have it in a climate controlled environment.

If your curious how the returns are for iBelink 11G I have it running on my pool and you can see the stats here:

http://www.zpool.ca/?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRH

The downtimes are from me turning it off as the wife hates the noise when we're watching TV. It is way noisier than the Baikal giants but of course they are only 900mh

I'll post the addresses for the D3's I have coming in Sept when I get them online

WOW,  Thanks Crackfoo for sharing your data on the DM11G.  What would you say is your average daily earnings as of lately?  I see it looked like your last payment was like $69?  Is that your norm right now?