chrysophylax (OP)
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
July 30, 2017, 04:51:36 PM |
|
I was getting 25Mh/s on gtx 1080 with the standard signatum miner, now I can report 38Mh/s with CWIgm Running at -i 25 and +100Mhz on the gpu clock I will post results for 1070 when I set up a new rig. sp-mod give 29 on 1070 core +150 PL75 thats correct ... sp also does the following ... charges 0.05btc for the miner - we charge nothing ... charges another 2.5% ongoing dev fee AFTER you pay for the miner - we charge nothing ... once you mine a pool - YOU are charged the pool fee ... in most cases thats at least 1-2% ontop of the charges that sp already charged - our pool is 0.7% ... locked - thats it ... in the op - we specifically state this is NOT about hashrates - but about the stability of OUR miner - not one we just copied ( ccminer-alexis78 ) and tweaked ( sp 'developing' ) and RESOLD to the public through closed source means of open source software ... though it would be nice to release our private kernels ( which have a much higher hashrate than this current incarnation of CWIgm or spmod ) into the public ... we wont - because guess what sp does to them? ... copy - tweak - close compile - resell - grow spmod farm ... thats why ... anyway - ill reiterate once again ... its about the STABILITY of our miner rather than hashrate ... optimization will come much later when we have all the algos and features we want in CWIgm - AND we have our code ( IP - Intellectual Property ) copyrighted and protected by international law ... then we can have a hashrate race ... we would be happy to compete then ... ... #crysx
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
July 30, 2017, 05:01:53 PM |
|
agreed on last post by OP, u got mail/pm
|
|
|
|
netbizphil
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 30, 2017, 06:11:56 PM |
|
sir interested, pls have me as your beta tester.
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
July 30, 2017, 08:01:29 PM |
|
1st test run, thx for the prompt reply OP, will setup on other rigs. PL - 81% Core - 130 Mem - 0 Settings may differ from each GPU or users, so do test out your own settings that suits each individual most. the pool is nice & very responsive maybe due to less miners now but i'm sure pool operator will ad more juice to it when needed. so far so good. it's much faster than other miners & it's FOC but i am gladly donating 0.7% to the pool operator until the pool grows with more users. will provide feedback once i'm done setting up other rigs. more ti's on it's way OP & hope we hit few more blocks & more miners to come join us, spread the hash guys
|
|
|
|
Mapuo
|
|
July 30, 2017, 08:24:04 PM |
|
gtx 1060 3GB i24
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
July 30, 2017, 08:34:25 PM |
|
ok, few ti's pointed to pool. various mix of msi gaming x, gigabyte aorus & zotac core extreme, have another zotac to be setup when i have more time & parts. diff rigs have diff settings down to individual gpus, will do some tune-ups when time permits. i'll just let it run & monitor it's stability. hashrate does have some improvements. but on the --api-bind the hashrate is wrongly presented over here https://monitoring.mylifegadgets.com/ it shows only 5.51 Mh/s but this miner now shows the power consumption & temps are normal, just the hashrate.
|
|
|
|
Kompik
|
|
July 30, 2017, 08:57:02 PM |
|
Great, thank you for what you are doing to the community
|
Bitrated user: Kompik.
|
|
|
du44
|
|
July 30, 2017, 09:40:00 PM |
|
as for me - very good idea! Optimized kernel, online monitoring... How about stability of the pool? I think in the future you need to add something like a profitability calc for availible algorithms.. Hope in the future this project will become better and better, but i'll join for testing when will be availivle other profitable algos, because have spmod already
|
hello
|
|
|
laik2
|
|
July 30, 2017, 10:15:57 PM |
|
Let us know when you are ready with Linux binary beta. Thanks
|
|
|
|
sohard4me
Member
Offline
Activity: 125
Merit: 10
|
|
July 30, 2017, 10:45:21 PM |
|
hi mod, please pm me, interested to join as beta tester, currently running some 1080 TI
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
July 30, 2017, 10:58:06 PM |
|
We are investigating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Payouts disabled, you will not receive any coins to your offline wallet for the time being
from pool, looks like a fix is needed. pool hit 2 blocks, yay !!!
|
|
|
|
Vario
Member
Offline
Activity: 77
Merit: 10
|
|
July 31, 2017, 01:22:36 AM |
|
hi dev. how can i get this miner on a beta test? I have 1080ti cards
|
|
|
|
Fearless92
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 31, 2017, 01:39:38 AM |
|
Hi Dev, I'm interested in getting this miner for the closed beta test. I only have a 1050 TI, but every little bit helps I sent you a PM.
|
|
|
|
bluereinz
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 31, 2017, 04:37:34 AM |
|
Ran the beta miner for about an hour then crashed my computer, same settting with spmod3 (gpu +150, mem +500, 85% pl, i=24), slightly slower hashrates. Still have more room for improvement. Gonna wait for the next release. Thx for the hardwork.
|
|
|
|
chrysophylax (OP)
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
July 31, 2017, 04:42:31 AM |
|
We are investigating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.
Payouts disabled, you will not receive any coins to your offline wallet for the time being
from pool, looks like a fix is needed. pool hit 2 blocks, yay !!!
hi mate ... just woke ... coffee ... just fixed the disabled payouts ... its a security measure on the side of MPOS when there is an issue in the backend - with wallet or maintenance or another thing ... it keeps the funds as safe as can be ... which is another reason why we limit the coins in the wallet of your account to 7000 before MPOS starts warnign you that you have to move them ... we do not want the coins held in the pool wallet - as they are better kept in your own desktop wallet ... first one needs to figure out what the issue is - then fix it accordingly ... most times forcing the automatic maintenance ( cron jobs ) to run fixes most issues - depending on what the error is - but any more serious ends up being a major problem ... so disabling the pool is the easiest way of protecting what coins are there ... MPOS is old software - and unfortunately is not maintained any longer ... some fixes get done here and there - but we are seriously considering forking the code - and working on it ourselves ... if anyone is a php / mysql dev - we would luv to hear from you and enter discussions - especially if you are closeby ... im personally really tired of these timezone differences ... anyway - glad to see things happening and results coming in ... tanx so much for your help so far ... #crysx
|
|
|
|
chrysophylax (OP)
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
July 31, 2017, 04:49:53 AM |
|
hi dev. how can i get this miner on a beta test? I have 1080ti cards
as mentioned in the op ( i know its LONG - but very important that you read it ) - pm me ... no use asking here how you can obtain the miner ... in the next few hours - we will be going through all the emails and pm ... for those posting results to us directly - please post them here so we can refer back to them when possible ... especially settings and stability results ... tanx ... #crysx
|
|
|
|
chrysophylax (OP)
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
July 31, 2017, 04:58:04 AM |
|
Ran the beta miner for about an hour then crashed my computer, same settting with spmod3 (gpu +150, mem +500, 85% pl, i=24), slightly slower hashrates. Still have more room for improvement. Gonna wait for the next release. Thx for the hardwork. tanx for that ... tho we dont know what your setup is for mining ... so its difficult to say why what when where or how ... we cant help or know what 'could' be the issue without knowing miner setup - and os / app setup ... the miner is set to max intensity as default ... which means IF you are using the miner on the same machine as the computer you use normally - then the intensity will more than likely end up locking your screen ( ie - killing the video session ) ... the default intensity for this algo is set at 24 or 25 currently - and by lowering it to an intensity that is feasible to run the miner AND your working session MAY give better stability results ... but this is the usual issue we have encountered - and not by any means the sole issue that may be on your machine ... each computer has MANY factors involved - from video card driver versions to Windows versions to the updates that Windows has ... all play a part in this complex puzzle ... your involvement with this is very helpful - as is your specifics ... tanx again ... #crysx
|
|
|
|
doktor83
|
|
July 31, 2017, 05:48:31 AM |
|
@chrysophylax 1.Why did you chose skunk as the first algo for your miner? 2.Are there any plans to involve AMD in the game too, in the near future? Keep up the good work
|
|
|
|
bluereinz
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 31, 2017, 06:16:55 AM |
|
Ran the beta miner for about an hour then crashed my computer, same settting with spmod3 (gpu +150, mem +500, 85% pl, i=24), slightly slower hashrates. Still have more room for improvement. Gonna wait for the next release. Thx for the hardwork. tanx for that ... tho we dont know what your setup is for mining ... so its difficult to say why what when where or how ... we cant help or know what 'could' be the issue without knowing miner setup - and os / app setup ... the miner is set to max intensity as default ... which means IF you are using the miner on the same machine as the computer you use normally - then the intensity will more than likely end up locking your screen ( ie - killing the video session ) ... the default intensity for this algo is set at 24 or 25 currently - and by lowering it to an intensity that is feasible to run the miner AND your working session MAY give better stability results ... but this is the usual issue we have encountered - and not by any means the sole issue that may be on your machine ... each computer has MANY factors involved - from video card driver versions to Windows versions to the updates that Windows has ... all play a part in this complex puzzle ... your involvement with this is very helpful - as is your specifics ... tanx again ... #crysx mining with asus gtx 1060 3gb, windows 10. i set the intensity to 24 at cwigm_x64 (same intensity with spmod3, same oc setting too). haven't try the intensity as i was busy with something else, probably gonna play with intensity later when i have free time. gonna post here later when i have the result. thx
|
|
|
|
michaelai3
Member
Offline
Activity: 101
Merit: 10
|
|
July 31, 2017, 06:19:32 AM |
|
I just sent you a PM. Let me know if you need anything from me.
|
|
|
|
|