▉ANN▉ MTNC ▉▉▉▉░ Masternodecoin ░▉▉▉ Multiple Privacy Center Platform

[ioanbtc]

I have joined second airdrop. Do i need to join slack or is not necessary ? I already follow on twitter.

[koang]

Joined 2nd round airdrop, fill the google form.
Although Twitter bounty has closed, I will keep spreading the news about this coin via Twitter.

[sth2017]

The second around airdrop coming, here we go.

Link == > submit here

you are on the right track and we are with you. in support there should be no doubt.

[cygan]

joined the 2nd round too.
btw i miss the tokens from the 1st airdrop round ... 

[EnViRoNmEnT]

Joined the Airdrop too, hope i am not too late
Just saw the second Airdrop 10 mins ago. GL me

[Scooter32]

Donation MTNC

MLgbVsyfhHhsTXrPqCGASMTbivh7uQFENH

[AbsoluteT]

Joined the Airdrop too, hope i am not too late
Just saw the project the first time 10 mins ago. GL me

You are in time welcome to the community!

I have joined second airdrop. Do i need to join slack or is not necessary ? I already follow on twitter.

I do not think joining the slack is a requirement but would be nice if you joined us.

[dutchkay]

waiting for masternodecoin airdrop sir.. i wanna join it..

can't wait for the airdrop, bring it on

[cygan]

-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

THX but i'm in the right folder:

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

regards

Try

Code:

sudo apt-get install autoconf autogen

THX so the next step, but the next error  

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
Can't exec "libtoolize": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 345, <GEN3> line 5.
autoreconf: failed to run libtoolize: No such file or directory
autoreconf: libtoolize is needed because this package uses Libtool

Have you installed all of the dependencies from the README file on Github?

Code:

sudo apt-get install libtool-bin

Hi, sorry to say but yet follow error:

pi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'.
libtoolize: copying file 'build-aux/m4/libtool.m4'
libtoolize: copying file 'build-aux/m4/ltoptions.m4'
libtoolize: copying file 'build-aux/m4/ltsugar.m4'
libtoolize: copying file 'build-aux/m4/ltversion.m4'
libtoolize: copying file 'build-aux/m4/lt~obsolete.m4'
configure.ac:10: installing 'build-aux/compile'
configure.ac:9: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
checking build system type... armv7l-unknown-linux-gnueabihf
checking host system type... armv7l-unknown-linux-gnueabihf
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert armv7l-unknown-linux-gnueabihf file names to armv7l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv7l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make supports nested variables... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... /usr/bin/ar
checking for ranlib... /usr/bin/ranlib
checking for strip... /usr/bin/strip
checking for gcc... gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for gcc option to accept ISO C89... (cached) none needed
checking if gcc supports -std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wno-unused-function -Wno-long-long -Wno-overlength-strings... yes
checking if gcc supports -fvisibility=hidden... yes
checking for __int128... no
checking for __builtin_expect... yes
checking for x86_64 assembly availability... no
checking gmp.h usability... no
checking gmp.h presence... no
checking for gmp.h... no
checking for CRYPTO... yes
checking for main in -lcrypto... yes
checking for EC functions in libcrypto... yes
checking whether byte ordering is bigendian... no
configure: Using assembly optimizations: no
configure: Using field implementation: 32bit
configure: Using bignum implementation: no
configure: Using scalar implementation: 32bit
configure: Using endomorphism optimizations: no
configure: Building ECDSA pubkey recovery module: yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/home/pi/masternodecoin/src/secp256k1'
gcc -I. -g -O2 -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
gcc gen_context.o -o gen_context
./gen_context
  CC       src/libsecp256k1_la-secp256k1.lo
  CCLD     libsecp256k1.la
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  CC       src/tests-tests.o
src/tests.c: In function ‘test_ecdsa_der_parse’:
src/tests.c:3561:52: error: dereferencing pointer to incomplete type ‘ECDSA_SIG {aka struct ECDSA_SIG_st}’
         valid_openssl = !BN_is_negative(sig_openssl->r) && !BN_is_negative(sig_openssl->s) && BN_num_bits(sig_openssl->r) > 0 && BN_num_bits(sig_openssl->r) <= 256 && BN_num_bits(sig_openssl->s) > 0 && BN_num_bits(sig_openssl->s) <= 256;
                                                    ^~
Makefile:933: recipe for target 'src/tests-tests.o' failed
make[1]: *** [src/tests-tests.o] Error 1
make[1]: Leaving directory '/home/pi/masternodecoin/src/secp256k1'
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 2
pi@raspberrypi:~/masternodecoin $

 

you should look at the dependencies, do everything that indicated the dev a few back, and what a user did that also gave an error, and the error persisted, so I went to https://github.com/masternodecoin/masternodecoin/blob/master/doc/build-unix.md and install all the dependencies for ubuntu, both the minimas like the others, and I could compile without problems

THX but i always have problems with secp256k1

make[1]: Entering directory '/home/pi/masternodecoin/src/secp256k1'
  CC       src/tests-tests.o
src/tests.c: In function ‘test_ecdsa_der_parse’:
src/tests.c:3561:52: error: dereferencing pointer to incomplete type ‘ECDSA_SIG {aka struct ECDSA_SIG_st}’
         valid_openssl = !BN_is_negative(sig_openssl->r) && !BN_is_negative(sig_openssl->s) && BN_num_bits(sig_openssl->r) > 0 && BN_num_bits(sig_openssl->r) <= 256 && BN_num_bits(sig_openssl->s) > 0 && BN_num_bits(sig_openssl->s) <= 256;
                                                    ^~
Makefile:933: recipe for target 'src/tests-tests.o' failed
make[1]: *** [src/tests-tests.o] Error 1
make[1]: Leaving directory '/home/pi/masternodecoin/src/secp256k1'
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 2

 

delete the fold secp256k1 then download from masternodecoin source then copy , paste secp256k1.

re complie secp256k1 again

I hope you get the problem fixed soon.
would be nice to stake the mtnc's on a raspberry pi  

[sth2017]

Donation MTNC

MLgbVsyfhHhsTXrPqCGASMTbivh7uQFENH

Thank you. sent you coins.
id:
d370207b3b1b8cace3d368d4e9d7491ca7bf76bc371b3e4e0f91b36d1423a608-000

Dev, Follow twitter. I previously sent you my accounts and address on PM.

[Buchi-88]

-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

THX but i'm in the right folder:

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

regards

Try

Code:

sudo apt-get install autoconf autogen

THX so the next step, but the next error  

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
Can't exec "libtoolize": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 345, <GEN3> line 5.
autoreconf: failed to run libtoolize: No such file or directory
autoreconf: libtoolize is needed because this package uses Libtool

Have you installed all of the dependencies from the README file on Github?

Code:

sudo apt-get install libtool-bin

Hi, sorry to say but yet follow error:

pi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'.
libtoolize: copying file 'build-aux/m4/libtool.m4'
libtoolize: copying file 'build-aux/m4/ltoptions.m4'
libtoolize: copying file 'build-aux/m4/ltsugar.m4'
libtoolize: copying file 'build-aux/m4/ltversion.m4'
libtoolize: copying file 'build-aux/m4/lt~obsolete.m4'
configure.ac:10: installing 'build-aux/compile'
configure.ac:9: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
checking build system type... armv7l-unknown-linux-gnueabihf
checking host system type... armv7l-unknown-linux-gnueabihf
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert armv7l-unknown-linux-gnueabihf file names to armv7l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv7l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make supports nested variables... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... /usr/bin/ar
checking for ranlib... /usr/bin/ranlib
checking for strip... /usr/bin/strip
checking for gcc... gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for gcc option to accept ISO C89... (cached) none needed
checking if gcc supports -std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wno-unused-function -Wno-long-long -Wno-overlength-strings... yes
checking if gcc supports -fvisibility=hidden... yes
checking for __int128... no
checking for __builtin_expect... yes
checking for x86_64 assembly availability... no
checking gmp.h usability... no
checking gmp.h presence... no
checking for gmp.h... no
checking for CRYPTO... yes
checking for main in -lcrypto... yes
checking for EC functions in libcrypto... yes
checking whether byte ordering is bigendian... no
configure: Using assembly optimizations: no
configure: Using field implementation: 32bit
configure: Using bignum implementation: no
configure: Using scalar implementation: 32bit
configure: Using endomorphism optimizations: no
configure: Building ECDSA pubkey recovery module: yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/home/pi/masternodecoin/src/secp256k1'
gcc -I. -g -O2 -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
gcc gen_context.o -o gen_context
./gen_context
  CC       src/libsecp256k1_la-secp256k1.lo
  CCLD     libsecp256k1.la
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  CC       src/tests-tests.o
src/tests.c: In function ‘test_ecdsa_der_parse’:
src/tests.c:3561:52: error: dereferencing pointer to incomplete type ‘ECDSA_SIG {aka struct ECDSA_SIG_st}’
         valid_openssl = !BN_is_negative(sig_openssl->r) && !BN_is_negative(sig_openssl->s) && BN_num_bits(sig_openssl->r) > 0 && BN_num_bits(sig_openssl->r) <= 256 && BN_num_bits(sig_openssl->s) > 0 && BN_num_bits(sig_openssl->s) <= 256;
                                                    ^~
Makefile:933: recipe for target 'src/tests-tests.o' failed
make[1]: *** [src/tests-tests.o] Error 1
make[1]: Leaving directory '/home/pi/masternodecoin/src/secp256k1'
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 2
pi@raspberrypi:~/masternodecoin $

 

you should look at the dependencies, do everything that indicated the dev a few back, and what a user did that also gave an error, and the error persisted, so I went to https://github.com/masternodecoin/masternodecoin/blob/master/doc/build-unix.md and install all the dependencies for ubuntu, both the minimas like the others, and I could compile without problems

THX but i always have problems with secp256k1

make[1]: Entering directory '/home/pi/masternodecoin/src/secp256k1'
  CC       src/tests-tests.o
src/tests.c: In function ‘test_ecdsa_der_parse’:
src/tests.c:3561:52: error: dereferencing pointer to incomplete type ‘ECDSA_SIG {aka struct ECDSA_SIG_st}’
         valid_openssl = !BN_is_negative(sig_openssl->r) && !BN_is_negative(sig_openssl->s) && BN_num_bits(sig_openssl->r) > 0 && BN_num_bits(sig_openssl->r) <= 256 && BN_num_bits(sig_openssl->s) > 0 && BN_num_bits(sig_openssl->s) <= 256;
                                                    ^~
Makefile:933: recipe for target 'src/tests-tests.o' failed
make[1]: *** [src/tests-tests.o] Error 1
make[1]: Leaving directory '/home/pi/masternodecoin/src/secp256k1'
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 2

 

delete the fold secp256k1 then download from masternodecoin source then copy , paste secp256k1.

re complie secp256k1 again

THX but i load this files new:

https://github.com/masternodecoin/masternodecoin/tree/master/src/secp256k1

But i can't complie the secp256k1, and i have install all package...

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
-bash: ./autogen.sh: Permission denied
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

[taidulvseh78044]

Joined the Airdrop too

[cantdecide]

Joined the second airdrop! Thank you

[niklasmato]

Watching the thread and joined the newest airdrop. Very curious where this will go in the long run ..

[belechau]

Joined, Thx. Good luck

[kraterion]

Since I missed first airdrop I'm joining this one . Joined both twitter and slack also, maybe I'll take a look at nova if I can buy some too

[Lucasgabd]

nice
joined slack and followed on twitter
already submitted info for the airdrop

looking forward

[Pumuckel21]

I just registerd to  the second masternodecoin airdrop
But where can i see if got accepted ?

[March]

i see the rules in the form that i need to be active, what if i active in btctalk but just outsite from this thread ?
or i need to active post in this tread ?

[Darkoth89]

I just registerd to  the second masternodecoin airdrop
But where can i see if got accepted ?

Check the Google document when it is uploaded

i see the rules in the form that i need to be active, what if i active in btctalk but just outsite from this thread ?
or i need to active post in this tread ?

Not just this thread, but the forum in general.