Megaminer 6.3 - Multi pool / Multi Algo launcher

[tutulfo]

Has anyone else had the issue that it seem to open multiple copies of claymore, its like it thinks one has crashes so opens another copy, i just checked my test machine as it was running 5 copies of claymore EthDcrMiner64

I can´t get this bug in my rig, need more clues

[1713861646]

1713861646

[1713861646]

1713861646

[1713861646]

1713861646

[1713861646]

1713861646

[1713861646]

1713861646

[tutulfo]

What miner are you using for tribus algo?


I´m having random problems with ccminer Tpruvot or ccminer 2.2

[MikeBuzz]

Has anyone else had the issue that it seem to open multiple copies of claymore, its like it thinks one has crashes so opens another copy, i just checked my test machine as it was running 5 copies of claymore EthDcrMiner64

I can´t get this bug in my rig, need more clues

It seems this is only happening when it should be closing the current miner to open the next, so only during bench marking or when running and profit changes, its seems to fail to close the current miner, as below you can see both are active

    Status: Running

                 Speed Active                      Launched Command
                 ----- ------                      -------- -------
 26.43 MH/s|74.88 MH/s 00 Days 00 Hours 03 Minutes Once     Ethash-Claymore\EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal MB.NVRig -epsw x -esm 3 -allpools 1 -dpool
                                                            lbry.EU.nicehash.com:3356 -dwal 39hpJhfk5iVr97ouFFggK4k6zW5NerymxV  -dpsw x  -dcri 120  -dcoin lbc
16.72 MH/s|668.62 MH/s 00 Days 00 Hours 03 Minutes Once     Ethash-Claymore\EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal MB.NVRig -epsw x -esm 3 -allpools 1 -dpool
                                                            pascal.EU.nicehash.com:3358 -dwal 39hpJhfk5iVr97ouFFggK4k6zW5NerymxV  -dpsw x  -dcri 120  -dcoin pasc

[celofan]

 
Now i have two window of ccminer with myr-gr algo from MPH and skunk algo from zpool  

 Status: Running

     Speed Active                      Launched Command
     ----- ------                      -------- -------
 75,75 MHs 00 Days 00 Hours 04 Minutes 2 Times  Bin\NVIDIA-Alexis78\ccminer.exe -o stratum+tcp://europe.hub.miningpoolh
                                                ub.com:20479 -u xxxxxx -p x -R 10 -r 4 -a myr-gr
105,46 MHs 00 Days 00 Hours 01 Minutes Once     Bin\NVIDIA-TPruvot\ccminer.exe -o stratum+tcp://mine.zpool.ca:8433 -u xxxxxxxxxxxxx -p c=BTC,dron,stats -R 10 -r 4 -a sku
                                                nk

And zpool is out from comparison table  
Only reset profit feature helps, but manual reset megaminer needed.
Not stable release, can't mine stable.
Waiting for stable release...

[tutulfo]

Now i have two window of ccminer with myr-gr algo from MPH and skunk algo from zpool 

 Status: Running

     Speed Active                      Launched Command
     ----- ------                      -------- -------
 75,75 MHs 00 Days 00 Hours 04 Minutes 2 Times  Bin\NVIDIA-Alexis78\ccminer.exe -o stratum+tcp://europe.hub.miningpoolh
                                                ub.com:20479 -u celofanster.dron -p x -R 10 -r 4 -a myr-gr
105,46 MHs 00 Days 00 Hours 01 Minutes Once     Bin\NVIDIA-TPruvot\ccminer.exe -o stratum+tcp://mine.zpool.ca:8433 -u 1
                                                NWrT8cav6izX8ajEEzK14qATCo9v79FJ6 -p c=BTC,dron,stats -R 10 -r 4 -a sku
                                                nk

And zpool is out from comparison table 
Only reset profit feature helps, but manual reset megaminer needed.
Not stable release, can't mine stable.
Waiting for stable release...

A lot of core sourcecode has be rewritten from MPM to allow new features, I think it´s ready for next features without mayor mods. Next stage is to stabilize core for start with stable base. I need feedback, on my two rigs works without bugs.

[Firstishe]

nicehash lyra dont work with this error

   Bin\NVIDIA-Alexis78\ccminer.exe -o stratum+tcp://lyra2re.EU.nicehash.com
                                               :3342 -u xx -p x -R 10 -r 4 -a lyra2v2



[2017-08-16 12:13:18] [S/A/T]: 0/0/53, diff: 0.003, 69.92MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.
[2017-08-16 12:13:18] [S/A/T]: 0/0/54, diff: 0.006, 69.90MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.
[2017-08-16 12:13:18] [S/A/T]: 0/0/55, diff: 0.003, 69.80MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.
[2017-08-16 12:13:18] [S/A/T]: 0/0/56, diff: 0.003, 69.80MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.


invalid port? may be 4342?

[katejcejs]

New error is it normal that its mining NIST5 all the time....

"
Transcript started, output file is .\Logs\2017-08-16_12-46-23.txt
Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Users\Megaminer-master_3.1\Megaminer-master\pools\YIIMP.ps1:39 char:26
+         $Yiimp_Request | Get-Member -MemberType properties| ForEach-O ...
+                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand
Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Users\Megaminer-master_3.1\Megaminer-master\pools\YIIMP.ps1:39 char:26
+         $Yiimp_Request | Get-Member -MemberType properties| ForEach-O ...
+                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand
"


+ when mining mutli pools, YIIMP api not responding....I can just single mine on YIIMP


SOMETHING IS WRONG WITH NIST5 ITS SHOWING 500$ A DAY AND IST ALLWAYS MINING IT!

NIST5 SPEED IS THE PROBLEM...in miner I get 168MHs, on profit it says 11.7GHs... = FIXED-rebenchmark




The only thing not working is YIIMP API...when mining in multi-pools!!

Great job TUTULFO!

[OverEasy]

I do not understand the new Whattomine Virtual pool.

For now I just want to use WTM to mine on Suprnova.


A. Is this possible
B. How?

I wrote this batch but it is going to all pools (Except YIIMP as I removed it from WTM file)
and it ignored Coinsname completely and brought up all coins.


:LOOP
del "Stats\*_Profit.txt"

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1
 -MiningMode Automatic
 -PoolsName Whattomine_Virtual
 -Coinsname bitcore,Signatum,Zcash
 -UserName xxx
 -WorkerName Rig3
GOTO LOOP

[tutulfo]

nicehash lyra dont work with this error

   Bin\NVIDIA-Alexis78\ccminer.exe -o stratum+tcp://lyra2re.EU.nicehash.com
                                               :3342 -u xx -p x -R 10 -r 4 -a lyra2v2



[2017-08-16 12:13:18] [S/A/T]: 0/0/53, diff: 0.003, 69.92MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.
[2017-08-16 12:13:18] [S/A/T]: 0/0/54, diff: 0.006, 69.90MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.
[2017-08-16 12:13:18] [S/A/T]: 0/0/55, diff: 0.003, 69.80MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.
[2017-08-16 12:13:18] [S/A/T]: 0/0/56, diff: 0.003, 69.80MH/s booooo
[2017-08-16 12:13:18] reject reason: Share above target.


invalid port? may be 4342?

No, connection is rigth, api is returning this

  {
        "paying": "0.04053176",
        "port": 3342,
        "name": "lyra2re",
        "algo": 9
      },


I think Alexis ccminer not works well for lyra2re, i will try other ccminer


EDIT: MM is sending bad algo to ccminer, is sending lyra2v2, it must send lyra2. Solved next release.

[woarang]

Any possibility to add custom intensity for each algorithm ?
For example Skunk with -i 24.
I could add it to the miner .json but then all algos that use it would run with that intensity.

[tutulfo]

Any possibility to add custom intensity for each algorithm ?
For example Skunk with -i 24.
I could add it to the miner .json but then all algos that use it would run with that intensity.

if you add in "algorithms" miner section it only applies to that algo
if you add in "arguments" miner section it applies to all algos that miner cover.

[woarang]

Any possibility to add custom intensity for each algorithm ?
For example Skunk with -i 24.
I could add it to the miner .json but then all algos that use it would run with that intensity.

if you add in "algorithms" miner section it only applies to that algo
if you add in "arguments" miner section it applies to all algos that miner cover.

Thx,

any Chance of removing specific algos from pools. atm im mining on hash, zpool, ns and the Profit for qubit and x11 on zpool is wrong.
with 28 mh/s on x11 it tells me 0,01 btc/day Profit and on qubit with 80mh/s 0,06 btc/day.
Stats on zpool do not look like that much Profit ....

Edit: Ok, just removed the algo from the miner file, that worked.

Also compared to nemosminer, skein does not look as profitable in your list. 0,00028 btc/d compared to 0,00156 in nemos.

[tutulfo]

I do not understand the new Whattomine Virtual pool.

For now I just want to use WTM to mine on Suprnova.


A. Is this possible
B. How?

I wrote this batch but it is going to all pools (Except YIIMP as I removed it from WTM file)
and it ignored Coinsname completely and brought up all coins.


:LOOP
del "Stats\*_Profit.txt"

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1
 -MiningMode Automatic
 -PoolsName Whattomine_Virtual
 -Coinsname bitcore,Signatum,Zcash
 -UserName xxx
 -WorkerName Rig3
GOTO LOOP

Core has no username and workername parameters, use config.txt or you can force on pool file
Whattomine page hasn´t bitcore or skunk coins, is impossible use WTM for that coins, and  Suprnova hasn´t stats, you need at least one source of profit statistics. Only possible combination for that 3 coins is  -PoolsName Whattomine_Virtual, yiimp
My develop release with that filter works ok (I don´t know why exactly), today I send release with many bug solved to Github

[celofan]

A lot of core sourcecode has be rewritten from MPM to allow new features, I think it´s ready for next features without mayor mods. Next stage is to stabilize core for start with stable base. I need feedback, on my two rigs works without bugs.

Okay...I mine on 3 pools: MPH,Zpool and HashRefinery
Release 3.1
 
1. After a few  minutes after start mining, message shown (from log.* file)
"PS>TerminatingError(Invoke-WebRequest): "Remote server ret: (502) bad gateway."
or >>TerminatingError(Invoke-WebRequest): "Remote server ret: (521) Origin Down."
ZPOOL API NOT RESPONDING...ABORTING
And no Zpool on list of pools.
After a few minutes again no HashRefinery in list, only MPH  
After reset profit procedure miner starts and working properly a few minutes.
Maybe 5 minutes, maybe 90 minutes - result is error message and lost zpool and hashrefinery pools from pools list

Multipoolminer and nemos miner 2.1 working stable, no error messages shown

2. Autostart example *.bat file not working. "No pools" messaged shown.
But if i click start.bat and put correct data, all works fine

3. Sometimes i have double or triple windows with miners
4. Some algos not tested after start megaminer -for example, skein algo on HashRefinery.

For me, this is not release, this is early alpha  

But this is great work, now if we can delete all errors, this is will be the best All-In-one miner for nvidia cards, sure

[tutulfo]

A lot of core sourcecode has be rewritten from MPM to allow new features, I think it´s ready for next features without mayor mods. Next stage is to stabilize core for start with stable base. I need feedback, on my two rigs works without bugs.

Okay...I mine on 3 pools: MPH,Zpool and HashRefinery
Release 3.1
 
1. After a few  minutes after start mining, message shown (from log.* file)
"PS>TerminatingError(Invoke-WebRequest): "Remote server ret: (502) bad gateway."
or >>TerminatingError(Invoke-WebRequest): "Remote server ret: (521) Origin Down."
ZPOOL API NOT RESPONDING...ABORTING
And no Zpool on list of pools.
After a few minutes again no HashRefinery in list, only MPH  
After reset profit procedure miner starts and working properly a few minutes.
Maybe 5 minutes, maybe 90 minutes - result is error message and lost zpool and hashrefinery pools from pools list

Multipoolminer and nemos miner 2.1 working stable, no error messages shown

2. Autostart example *.bat file not working. "No pools" messaged shown.
But if i click start.bat and put correct data, all works fine

3. Sometimes i have double or triple windows with miners
4. Some algos not tested after start megaminer -for example, skein algo on HashRefinery.

For me, this is not release, this is early alpha  

But this is great work, now if we can delete all errors, this is will be the best All-In-one miner for nvidia cards, sure

1. MPM and Nemos hasn´t error messages  but if api not working must do the same, continue mining last miner, MM can run more than one pool same time, if one falls, use others.

2. What means correct data?

3. Solved

4. I don´t understand, Hash Refinery has api to declare host and port, and skein is detected, all seems ok.

[OverEasy]

I do not understand the new Whattomine Virtual pool.

For now I just want to use WTM to mine on Suprnova.


A. Is this possible
B. How?

I wrote this batch but it is going to all pools (Except YIIMP as I removed it from WTM file)
and it ignored Coinsname completely and brought up all coins.


:LOOP
del "Stats\*_Profit.txt"

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1
 -MiningMode Automatic
 -PoolsName Whattomine_Virtual
 -Coinsname bitcore,Signatum,Zcash
 -UserName xxx
 -WorkerName Rig3
GOTO LOOP

Core has no username and workername parameters, use config.txt or you can force on pool file
Whattomine page hasn´t bitcore or skunk coins, is impossible use WTM for that coins, and  Suprnova hasn´t stats, you need at least one source of profit statistics. Only possible combination for that 3 coins is  -PoolsName Whattomine_Virtual, yiimp
My develop release with that filter works ok (I don´t know why exactly), today I send release with many bug solved to Github

Can you add Cryptopia api? And maybe Bittrex?
https://www.cryptopia.co.nz/Forum/Thread/255

And while we are at it how about Cryptopia as a pool ?

[tutulfo]

I do not understand the new Whattomine Virtual pool.

For now I just want to use WTM to mine on Suprnova.


A. Is this possible
B. How?

I wrote this batch but it is going to all pools (Except YIIMP as I removed it from WTM file)
and it ignored Coinsname completely and brought up all coins.


:LOOP
del "Stats\*_Profit.txt"

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1
 -MiningMode Automatic
 -PoolsName Whattomine_Virtual
 -Coinsname bitcore,Signatum,Zcash
 -UserName xxx
 -WorkerName Rig3
GOTO LOOP

Core has no username and workername parameters, use config.txt or you can force on pool file
Whattomine page hasn´t bitcore or skunk coins, is impossible use WTM for that coins, and  Suprnova hasn´t stats, you need at least one source of profit statistics. Only possible combination for that 3 coins is  -PoolsName Whattomine_Virtual, yiimp
My develop release with that filter works ok (I don´t know why exactly), today I send release with many bug solved to Github

Can you add Cryptopia api? And maybe Bittrex?
https://www.cryptopia.co.nz/Forum/Thread/255

And while we are at it how about Cryptopia as a pool ?

Cryptopia and Bittrex are being used now on Manual mode to show coin price.

I think Cryptopia pools are down time ago, true?

[OverEasy]

I have not seen Cryptopia down. I sell my SIGT there.
It's an exchange not a pool I mis-typed that last message....

[celofan]

1. MPM and Nemos hasn´t error messages  but if api not working must do the same, continue mining last miner, MM can run more than one pool same time, if one falls, use others.

2. What means correct data?

3. Solved

4. I don´t understand, Hash Refinery has api to declare host and port, and skein is detected, all seems ok.

1.The same but MPM and nemos when profitability refreshing show all zpool algos and pools, but MM shows only one pool or no zpool algos and pools.
2. That means i put data manually step-by-step in start.bat file. Answer 0, and  0,1,5 . The same data as i put in auto_start_example.bat file, but auto_start_example.bat not work
3. Great
4. Sorry,already have it. I don't know what happens.
This is a table after first test.No skein on HashRefinery

Algorithm       Coin             Miner                Speed                  BTC/Day EUR/Day Pool      PoolWorkers
---------       ----             -----                -----                  ------- ------- ----      -----------
SKEIN           digibyte         ccminerAlexis78      1,73 GH/s              0,00249    8,78 MPH
MYRIAD-GROESTL  digibyte         ccminerAlexis78      214,17 MH/s            0,00225    7,92 MPH
TRIBUS                           CcminerTpruvot       141,73 MH/s            0,00212    7,47 ZPOOL     5
LYRA2V2                          ccminerAlexis78      126,85 MH/s            0,00202    7,10 ZPOOL     276
SKUNK                            CcminerTpruvot       100,19 MH/s            0,00195    6,87 ZPOOL     129
X17                              ccminerAlexis78      34,96 MH/s             0,00195    6,85 ZPOOL     19
VELTOR                           ccminerAlexis78      104,01 MH/s            0,00163    5,72 ZPOOL     5
NEOSCRYPT                        CcminerTpruvot       2,54 MH/s              0,00158    5,55 ZPOOL     3003
ETHASH|LBRY     ethereum|        ClaymoreDual120      72,99 MH/s|189,22 MH/s 0,00157    5,52 MPH|ZPOOL
ETHASH|BLAKE2B  ethereum|siacoin ClaymoreDual100      73,60 MH/s|2,29 GH/s   0,00157    5,52 MPH|MPH
ETHASH|BLAKE2S  ethereum|        ClaymoreDual120      72,99 MH/s|2,64 GH/s   0,00156    5,50 MPH|ZPOOL
ETHASH|LBRY     ethereum|        ClaymoreDual100      73,60 MH/s|166,04 MH/s 0,00155    5,44 MPH|ZPOOL
ETHASH|BLAKE2B  ethereum|siacoin ClaymoreDual80       73,99 MH/s|1,90 GH/s   0,00153    5,39 MPH|MPH
LYRA2Z          zcoin            CcminerTpruvot       5,54 MH/s              0,00153    5,38 MPH
ETHASH|LBRY     ethereum|        ClaymoreDual80       73,99 MH/s|140,72 MH/s 0,00152    5,34 MPH|ZPOOL
ETHASH|BLAKE14R ethereum|        ClaymoreDual120      72,99 MH/s|2,81 GH/s   0,00151    5,31 MPH|ZPOOL
ETHASH|BLAKE14R ethereum|        ClaymoreDual100      73,60 MH/s|2,48 GH/s   0,00150    5,26 MPH|ZPOOL
ETHASH|BLAKE2B  ethereum|siacoin ClaymoreDual60       74,42 MH/s|1,52 GH/s   0,00149    5,26 MPH|MPH
ETHASH|LBRY     ethereum|        ClaymoreDual60       74,42 MH/s|114,30 MH/s 0,00149    5,23 MPH|ZPOOL
MYRIAD-GROESTL                   ccminerAlexis78      214,17 MH/s            0,00148    5,21 ZPOOL     23
ETHASH|BLAKE14R ethereum|        ClaymoreDual80       73,99 MH/s|2,09 GH/s   0,00147    5,18 MPH|ZPOOL
X11GOST                          ccminerAlexis78Cuda8 37,05 MH/s             0,00147    5,18 ZPOOL     11
MYRIAD-GROESTL  myriad           ccminerAlexis78      214,17 MH/s            0,00146    5,13 MPH
ETHASH|BLAKE14R ethereum|        ClaymoreDual60       74,42 MH/s|1,67 GH/s   0,00145    5,09 MPH|ZPOOL
LYRA2V2         vertcoin         ccminerAlexis78      126,85 MH/s            0,00143    5,01 MPH
BITCORE                          ccminer-2.2          45,05 MH/s             0,00141    4,96 ZPOOL     32
EQUIHASH        zclassic         EWBF                 1,28 KH/s              0,00137    4,81 MPH
ETHASH          ethereum         ClaymoreETH          74,81 MH/s             0,00133    4,67 MPH
HMQ1725                          ccminer-2.2          13,51 MH/s             0,00132    4,64 ZPOOL     52
LBRY                             ccminerAlexis78      903,83 MH/s            0,00131    4,61 ZPOOL     42
BLAKE2S                          ccminerAlexis78      12,97 GH/s             0,00131    4,61 ZPOOL     251
EQUIHASH        zcash            EWBF                 1,28 KH/s              0,00130    4,58 MPH
ETHASH|LBRY     ethereum|        ClaymoreDual40       64,34 MH/s|87,09 MH/s  0,00127    4,46 MPH|ZPOOL
ETHASH|BLAKE2B  ethereum|siacoin ClaymoreDual40       64,34 MH/s|1,10 GH/s   0,00127    4,46 MPH|MPH
ETHASH          ethereum-classic ClaymoreETH          74,81 MH/s             0,00126    4,44 MPH
SKEIN           myriad           ccminerAlexis78      1,73 GH/s              0,00126    4,44 MPH
NEOSCRYPT       feathercoin      CcminerTpruvot       2,54 MH/s              0,00124    4,36 MPH
ETHASH|BLAKE14R ethereum|        ClaymoreDual40       64,34 MH/s|1,21 GH/s   0,00123    4,34 MPH|ZPOOL
ETHASH          musicoin         ClaymoreETH          74,81 MH/s             0,00116    4,09 MPH
NIST5                            ccminerAlexis78      150,86 MH/s            0,00116    4,09 ZPOOL     62
EQUIHASH                         EWBF                 1,28 KH/s              0,00112    3,94 ZPOOL     60
KECCAK          maxcoin          CcminerTpruvot       1,77 GH/s              0,00104    3,66 MPH
BLAKECOIN                        CcminerTpruvot       13,72 GH/s             0,00104    3,65 ZPOOL     26
GROESTL         groestlcoin      CcminerKlaust        120,18 MH/s            0,00103    3,64 MPH
TIMETRAVEL                       ccminerSKUNKKrnlx    73,15 MH/s             0,00102    3,59 ZPOOL     16
ETHASH          expanse          ClaymoreETH          74,81 MH/s             0,00102    3,57 MPH
GROESTL                          CcminerKlaust        120,18 MH/s            0,00101    3,55 ZPOOL     4
X11EVO                           ccminerAlexis78      40,95 MH/s             0,00094    3,32 ZPOOL     9
KECCAK                           CcminerTpruvot       1,77 GH/s              0,00089    3,12 ZPOOL     5
C11                              CcminerSp-mod        42,57 MH/s             0,00087    3,05 ZPOOL     10
JHA                              CcminerTpruvot       42,90 MH/s             0,00074    2,61 ZPOOL     3
BLAKE14R                         CcminerTpruvot       8,30 GH/s              0,00063    2,23 ZPOOL     411
CRYPTONIGHT     monero           ccminer-2.2          1,36 KH/s              0,00059    2,07 MPH
X13                              ccminerAlexis78      51,88 MH/s             0,00035    1,22 H.RFRY    7
QUARK                            ccminerAlexis78      94,51 MH/s             0,00024    0,86 H.RFRY    5
QUBIT           geocoin          ccminerAlexis78Cuda8 80,04 MH/s             0,00018    0,63 MPH
QUBIT                            ccminerAlexis78Cuda8 80,04 MH/s             0,00017    0,61 H.RFRY    0
X11             dash             ccminerAlexis78      51,30 MH/s             0,00015    0,52 MPH
QUBIT           digibyte         ccminerAlexis78Cuda8 80,04 MH/s             0,00014    0,50 MPH
X11                              ccminerAlexis78      51,30 MH/s             0,00014    0,48 H.RFRY    0
X11             startcoin        ccminerAlexis78      51,30 MH/s             0,00012    0,43 MPH
SKEIN                            ccminerAlexis78      1,73 GH/s              0,00010    0,36 ZPOOL     409
X11             adzcoin          ccminerAlexis78      51,30 MH/s             0,00005    0,18 MPH
X14                              ccminerAlexis78      38,76 MH/s             0,00004    0,14 ZPOOL     6
X15                              CcminerTpruvot       28,02 MH/s             0,00001    0,02 ZPOOL     12

P.S. sorry for my bad english
P.P.S sorry for too many words 

[tutulfo]

I have not seen Cryptopia down. I sell my SIGT there.
It's an exchange not a pool

I´m user of Cryptopia, I thought you are talking about Cryptopia mineshaft (old cryptopia pool), if you are talking about use Cryptopia as Whattomine, is not possible, Cryptopia hasn´t profit info, only exchange rate info.