Megaminer 6.3 - Multi pool / Multi Algo launcher

[tutulfo]

3.2 Release

*Added EthMiner for AMD
*Added Sgminer for Skein for AMD
*Added 3 retries to yiimp api connection to minimize errors.

*Fixed: lyra2RE not working at Nicehash
*Fixed: file wrapper error
*Fixed (I hope): MM open new miner not closing old one


Thank all for feedback, my testing force and hardware is limited.


First priority will be repair bugs, but what are next features you wish to develop?

1. Allow Differents logins for each non anonymous pool
2. Upgrade Downloader to no miners included needed on release
3. Option to each miner to set benchmark time (some are faster, some are slower)
4. Keys response to main screen: reorder by other info, force next interval, etc.
5. Back option in menus
6. Add a check to manual mode coin menu for only shows coins has at least an asociated miner
7. CPU Mining miners
8. Config intensity parameter (0%-100%) that affect all miners
9. Automatic batch creation based on menu selection
10. Api (rest) to get info (pool/coin/algo...) from other software
11. Automatic24h mode, coin change based on pool 24h statistics(now is in current statistics)
12. Screen to check all pools wallets (ballances)
13. Virtual pool based on Coinwarz info
14. Graphical interface (I think is possible, but not sure)
15. Config Variable to set coin change only happens if new coin is % more profitable that old one.

[1713904116]

1713904116

[1713904116]

1713904116

[OverEasy]

Awesome. Testing now on one of my 5 card AMD rigs
Using Auto
MPH,Zpool,Yiimp

[OverEasy]

I am on day 3 now trying to get a skunk algo miner to work on Windows x64 with AMD
So far no luck.
I have found one miner that's interesting but it is closed source so it makes me nervous.
Also it does not accept command line parameters but uses a conf file. Doubt I try to mess with it. Its called prospector.

Why can't I find a AMD Windows x64 skunk miner?
I know one must exist lol....

Please reply if anyone finds one.
 

[MikeBuzz]

X11 zpool pricing seems very wrong

X11                              ccminerAlexis78      17.08 MH/s                  0.04194  155.64 ZPOOL     2227

Have zpool change there pricing for x11 to per GH?


Hmm

 * 24h estimation from net difficulty in mBTC/MH/day (in TH for sha256 & GH for blake, decred, x11, quark, qubit, kS for equihash)

[OverEasy]

Good news! Ethminer now benchmarks!
Bad news...on every algo switch AND every profit check it extracts the same file - equihash-claymore
I dont have any claymore json files in my folder!
If I delete the zip it just downloads it again.

7-Zip [32] 16.04 : Copyright (c) 1999-2016 Igor Pavlov : 2016-10-04

Scanning the drive for archives:
1 file, 2324296 bytes (2270 KiB)

Extracting archive: Equihash-Claymore.zip
--
Path = Equihash-Claymore.zip
Type = zip
Physical Size = 2324296

Every startup
Every switch
Every profit check (so every 60 seconds)

[Firstishe]

X11 zpool pricing seems very wrong

X11                              ccminerAlexis78      17.08 MH/s                  0.04194  155.64 ZPOOL     2227

Have zpool change there pricing for x11 to per GH?


Hmm

 * 24h estimation from net difficulty in mBTC/MH/day (in TH for sha256 & GH for blake, decred, x11, quark, qubit, kS for equihash)

+1 my 3x1060 mine 0,2btc per day... where is ferrary car show

but i see this bug on older version for quark qubit x11 algo, and on new version only x11

[pete83]

3.2 Release

...
11. Automatic24h mode, coin change based on 24h statistics(now is in current statistics)
...

I would love to see the 24h mode. Everything else on the list is not that important to me.

Maybe also an option on Automatic mode where you can configure to only switch to a new algorithm if the new one has more then 15% income then the current mining algorithm.


Really a great miner so far!

[universalresonance]

So noob here,


What happens if I don't have wallet for certain coins that are on the list and I remove those wallets altogether. Earnings get lost?

[celofan]

Nice work.
Please,add yescrypt support for MM

[tutulfo]

Good news! Ethminer now benchmarks!
Bad news...on every algo switch AND every profit check it extracts the same file - equihash-claymore
I dont have any claymore json files in my folder!
If I delete the zip it just downloads it again.

7-Zip [32] 16.04 : Copyright (c) 1999-2016 Igor Pavlov : 2016-10-04

Scanning the drive for archives:
1 file, 2324296 bytes (2270 KiB)

Extracting archive: Equihash-Claymore.zip
--
Path = Equihash-Claymore.zip
Type = zip
Physical Size = 2324296

Every startup
Every switch
Every profit check (so every 60 seconds)

Problem is zecminer.json, delete.

If you find a equihash miner for AMD tell me.

[tutulfo]

Nice work.
Please,add yescrypt support for MM

It was supported but profit was near zero, there is any profitable coin on yescript?

[tutulfo]

So noob here,


What happens if I don't have wallet for certain coins that are on the list and I remove those wallets altogether. Earnings get lost?

There is three kinds of pool:

- With Autoexchange ( Zpool, Nicehash, Hash Refinery), they change coin you mine to destination coin, you only need a wallet of destination coin (default is btc) for Anonymous (zpool, NH and HR) or username if not anonymous (MPH)

- Without Autoexchange (Suprnova, BF, Yiimp), they pay in coin you mine, and you need a wallet of each coin to login for anonymous (Yiimp) and username for not anonymous (BF and Suprnova)

- Autoexchange ON/OFF, on MPH you can select if you want autoexchange on web.


Easier way to have wallets for each coin is use Cryptopia for example.

[tutulfo]

X11 zpool pricing seems very wrong

X11                              ccminerAlexis78      17.08 MH/s                  0.04194  155.64 ZPOOL     2227

Have zpool change there pricing for x11 to per GH?


Hmm

 * 24h estimation from net difficulty in mBTC/MH/day (in TH for sha256 & GH for blake, decred, x11, quark, qubit, kS for equihash)

Something has change on zpool api for that coins, where do you see that legend?, I see this one:


 * values in mBTC/MH/day, per GH for sha256 & blake algos, kSol. for equihash


In github is a new Zpool.json with X11,Qubit and Quark fixed.

[OverEasy]

Good news! Ethminer now benchmarks!
Bad news...on every algo switch AND every profit check it extracts the same file - equihash-claymore
I dont have any claymore json files in my folder!
If I delete the zip it just downloads it again.

7-Zip [32] 16.04 : Copyright (c) 1999-2016 Igor Pavlov : 2016-10-04

Scanning the drive for archives:
1 file, 2324296 bytes (2270 KiB)

Extracting archive: Equihash-Claymore.zip
--
Path = Equihash-Claymore.zip
Type = zip
Physical Size = 2324296

Every startup
Every switch
Every profit check (so every 60 seconds)

Problem is zecminer.json, delete.

If you find a equihash miner for AMD tell me.

Thanks!
Gatelessgate handles equihash on AMD

{
"Path" : ".\\Bin\\GatelessGate\\GatelessGate.exe",
"Uri" : "https://github.com/zawawawa/gatelessgate/releases/download/v0.1.3-pre6b/gatelessgate-0.1.3-pre6b-win64.zip",
"Types" : ["AMD"],
"Arguments" : "--api-port 4028 --api-listen -o #PROTOCOL#://#SERVER#:#PORT# -u #LOGIN# -p #PASSWORD# --gpu-platform #GPUPLATFORM#",
"API" : "Xgminer",
"APIPort" : 4028,
"Wrap" : false,
"Dualmining":false,
"Algorithms": [
            {"neoscrypt":"-k neoscrypt --gpu-threads 1 --worksize 256"},
            {"ethash":"-k ethash-new --gpu-threads 2 --worksize 192"},
            {"cryptonight":"-k cryptonight --gpu-threads 1 --worksize 4"},
            {"equihash":"-k equihash --gpu-threads 2 --worksize 256"},
            {"pascal":"-k pascal --gpu-threads 2 --worksize 256"}
    ]
}

[OverEasy]

Reporting more good news on AMD

MPH has been on Eth for a while now and just changed to Eth-Classic

Within a minute your script picked that up and my Ethash miner smoothly moved from Eth to Eth classic.

I know this is the intended operation but is cool to actually watch it work.

Thanks...

[celofan]

The same bug that in 3.1 -no zpool after zpool api fault

[MikeBuzz]

X11 zpool pricing seems very wrong

X11                              ccminerAlexis78      17.08 MH/s                  0.04194  155.64 ZPOOL     2227

Have zpool change there pricing for x11 to per GH?


Hmm

 * 24h estimation from net difficulty in mBTC/MH/day (in TH for sha256 & GH for blake, decred, x11, quark, qubit, kS for equihash)

Something has change on zpool api for that coins, where do you see that legend?, I see this one:


 * values in mBTC/MH/day, per GH for sha256 & blake algos, kSol. for equihash


In github is a new Zpool.json with X11,Qubit and Quark fixed.

This page, but not 100% sure its also for the api pages, maybe crackfoo could advise

[tutulfo]

The same bug that in 3.1 -no zpool after zpool api fault

I'm not sure it is a bug, expected behavior for no pool api response is:

If you are using only that pool, and no response in first execution -- infinite retries

If you are using only that pool, and no response in other execution, continue mining actual coin, hide profit table for outdated info an wait next interval to check again.

If you are using more pools, pool not responding is ignored and execution continues with other pools info, at next interval check again.

I could hide error message, dont hide profit data and simulate nothing happens, but i think this was unclear.

Until now, I dont see api error message and try api manually and its working.

[MikeBuzz]

X11 zpool pricing seems very wrong

X11                              ccminerAlexis78      17.08 MH/s                  0.04194  155.64 ZPOOL     2227

Have zpool change there pricing for x11 to per GH?


Hmm

 * 24h estimation from net difficulty in mBTC/MH/day (in TH for sha256 & GH for blake, decred, x11, quark, qubit, kS for equihash)

Something has change on zpool api for that coins, where do you see that legend?, I see this one:


 * values in mBTC/MH/day, per GH for sha256 & blake algos, kSol. for equihash


In github is a new Zpool.json with X11,Qubit and Quark fixed.

This page, but not 100% sure its also for the api pages, maybe crackfoo could advise

The prices with the latest file looks perfect

[celofan]

The same bug that in 3.1 -no zpool after zpool api fault

I'm not sure it is a bug, expected behavior for no pool api response is:

If you are using only that pool, and no response in first execution -- infinite retries

If you are using only that pool, and no response in other execution, continue mining actual coin, hide profit table for outdated info an wait next interval to check again.

If you are using more pools, pool not responding is ignored and execution continues with other pools info, at next interval check again.

I could hide error message, dont hide profit data and simulate nothing happens, but i think this was unclear.

Until now, I dont see api error message and try api manually and its working.

Okay, for example:

Multipoolminer before zpool api fault

Miner              Algorithm           Speed   BTC/Day    BTC/GH/Day Pool
-----                ---------           ----- -------  ---------- ----
CcminerSp        Skein           1,83 GH/s  0,00276     0,00151      MiningPoolHub-DigibyteSkein
CcminerAleksis  Skein           1,70 GH/s  0,00255     0,00151      MiningPoolHub-DigibyteSkein
CcminerKlaust   Groestl       132,88 MH/s 0,00230    0,01728      MiningPoolHub-Groestlcoin
CcminerTpruvot Tribus        150,18 MH/s 0,00197    0,01314      Zpool-
CcminerAleksis  Blakecoin      16,87 GH/s 0,00178   0,00011      Zpool-
CcminerAleksis  Blake2s        13,64 GH/s 0,00166    0,00012      Zpool-

Multipoolminer under zpool api fault

Miner              Algorithm           Speed BTC/Day     BTC/GH/Day    Pool
-----                 ---------           ----- -------           ----------        ----
EWBF2             Equihash        1,40 KH/s 0,00155   110,52305   MiningPoolHub-Zclassic
EWBF0             Equihash        1,36 KH/s 0,00151   110,52305   MiningPoolHub-Zclassic
EWBF1             Equihash        1,33 KH/s 0,00148   110,52305   MiningPoolHub-Zclassic
CcminerTpruvot Lyra2z           5,65 MH/s 0,00146     0,25878     MiningPoolHub-Zcoin
CcminerAleksis Lyra2RE2        131,82 MH/s 0,00123  0,00932    MiningPoolHub-Vertcoin
CcminerLyra2z  Lyra2z            4,66 MH/s 0,00121     0,25878    MiningPoolHub-Zcoin

As we can see, no Zpool in table, the same as MM.

And after Zpool api commands restored, MPM.
When next check of profitability!
API restored- we can see zpool algos and pools immediately

Miner               Algorithm           Speed BTC/Day  BTC/GH/Day     Pool
-----                 ---------           ----- -------  ----------                  ----
CcminerAleksis   X17                34,41 MH/s 0,00433     0,12599   Zpool-
CcminerSp         X17                29,10 MH/s 0,00367     0,12599   Zpool-
CcminerAleksis   Nist5             155,52 MH/s 0,00321     0,02066  Zpool-
CcminerTpruvot hmq1725        14,18 MH/s 0,00224     0,15783   Zpool-
EWBF2              Equihash        1,40 KH/s 0,00155 1 110,52305   MiningPoolHub-Zclassic
CcminerAleksis  Sib                 42,01 MH/s 0,00151     0,03601   Zpool-
EWBF0              Equihash        1,36 KH/s 0,00151 1 110,52305   MiningPoolHub-Zclassic
EWBF1              Equihash        1,33 KH/s 0,00148 1 110,52305   MiningPoolHub-Zclassic


And MM before Zpool API fault.

Algorithm                Coin                Miner                  Speed            BTC/Day EUR/Day Pool      PoolWorkers
---------                   ----                  -----                  -----              ------- ------- ----               -----------
SKEIN                   digibyte         ccminerAlexis78      1,73 GH/s      0,00249    8,78      MPH
MYRIAD-GROESTL  digibyte         ccminerAlexis78      214,17 MH/s  0,00225    7,92      MPH
TRIBUS                                     CcminerTpruvot       141,73 MH/s  0,00212    7,47      ZPOOL     5
LYRA2V2                                   cminerAlexis78        126,85 MH/s   0,00202    7,10      ZPOOL     276
SKUNK                                     CcminerTpruvot       100,19 MH/s   0,00195    6,87      ZPOOL     129
X17                                          ccminerAlexis78      34,96 MH/s     0,00195    6,85      ZPOOL     19

And MM after Zpool API fault continuous time....

Algorithm      Coin             Miner                Speed                BTC/Day EUR/Day Pool    PoolWorkers
---------      ----                 -----                -----                ------- ------- ----    -----------
NIST5                           ccminerAlexis78      150,45 MH/s     0,00276   10,21  H.RFRY           21
GROESTL    groestlcoin   CcminerKlaust        120,09 MH/s     0,00217    8,04   MPH
SKEIN        digibyte       ccminerAlexis78      1,73 GH/s         0,00215    7,97   MPH
EQUIHASH zcash            EWBF                     1,29 KH/s        0,00158    5,83   MPH
LYRA2V2                        ccminerAlexis78      125,45 MH/s    0,00146    5,39   H.RFRY           24
LYRA2Z      zcoin            CcminerTpruvot       5,55 MH/s        0,00140    5,18   MPH

No Zpool in table and no refreshing for continuous time!
And we can not see profitability of Zpool algos!
I need check this information for polls statistic and i must compare it!
So, please, can you move back zpool statistic after Zpool API is being restored?

And how i can change day profitability currency when i want to see it in dollars ?