minerja
|
|
January 14, 2018, 03:23:03 PM |
|
Why did block reward very low. Just is 0.000875 PRUX per block. It does not look worth it for miner.
Hi guys, I have mined this coin right from the beginning, and much as i have always supported it, i too agree, the reward is simply to low to make any sense mining it, especially when coupled with the very low value. Dev i think you need to rework the rewards otherwise this coin is completely dead....sorry... i hope you have a re-think. J
|
|
|
|
Merratzz (OP)
|
|
January 21, 2018, 06:18:24 AM |
|
Why did block reward very low. Just is 0.000875 PRUX per block. It does not look worth it for miner.
Hi guys, I have mined this coin right from the beginning, and much as i have always supported it, i too agree, the reward is simply to low to make any sense mining it, especially when coupled with the very low value. Dev i think you need to rework the rewards otherwise this coin is completely dead....sorry... i hope you have a re-think. J Why?? the project is out we d`not need always HARDFORKS and updates like the other coins, the code is very good needs low resources and the coin is running well. Pool Payout is 94% we have a fee of 6% for PRUX, because PRUX is with 3 SECOND TARGET VERY FAST (and it was from the beginning a experiment, but now it is reality) WE LET It RUN AS IT IS. IF you think the Fees of the only one pool are to high? You can very easy do some solo-mining and you get 100%, or you open your own pool i`am happy with. (And you will see, it is not so easy to have a ultra fast pool with PRUX and you will see you have to set minimum 6% FEE )
|
|
|
|
Merratzz (OP)
|
|
January 21, 2018, 04:07:59 PM |
|
Why did block reward very low. Just is 0.000875 PRUX per block. It does not look worth it for miner.
Pool Fee lowered from 10% to 6 % IF you think the Fees of the only one pool are to high? You can very easy do some solo-mining and you get 100%, or you open your own pool i`am happy with. (And you will see, it is not so easy to have a ultra fast pool with PRUX and you will see you have to set minimum 6% FEE ) ;-)
|
|
|
|
Bitcoin-Pool
|
|
January 21, 2018, 06:09:03 PM |
|
We changed Our MiningPool Server to New Hardware ( Xeon1230v6, 32gb DDR4 Ram, 480GB SSD in RAID and GIGABIT Upload!! )
Now We are online agian. Algo: Scrypt stratum+tcp://85.214.211.186:3433 -u YOUR_WALLET_ADDRESS -p c=PRUX
|
|
|
|
suspiciously square
Jr. Member
Offline
Activity: 59
Merit: 3
|
|
January 23, 2018, 05:49:00 PM |
|
Why did block reward very low. Just is 0.000875 PRUX per block. It does not look worth it for miner.
Hi guys, I have mined this coin right from the beginning, and much as i have always supported it, i too agree, the reward is simply to low to make any sense mining it, especially when coupled with the very low value. Dev i think you need to rework the rewards otherwise this coin is completely dead....sorry... i hope you have a re-think. J Why?? the project is out we d`not need always HARDFORKS and updates like the other coins, the code is very good needs low resources and the coin is running well. Pool Payout is 94% we have a fee of 6% for PRUX, because PRUX is with 3 SECOND TARGET VERY FAST (and it was from the beginning a experiment, but now it is reality) WE LET It RUN AS IT IS. IF you think the Fees of the only one pool are to high? You can very easy do some solo-mining and you get 100%, or you open your own pool i`am happy with. (And you will see, it is not so easy to have a ultra fast pool with PRUX and you will see you have to set minimum 6% FEE ) The OP says it has a block time of three seconds, and you can send and confirm a transaction in 3 seconds. Does that mean each transaction only needs one confirmation? Isn't relying on one confirmation dangerous and make PRUX susceptible to attacks?
|
|
|
|
Merratzz (OP)
|
|
January 23, 2018, 05:59:22 PM |
|
Why did block reward very low. Just is 0.000875 PRUX per block. It does not look worth it for miner.
Hi guys, I have mined this coin right from the beginning, and much as i have always supported it, i too agree, the reward is simply to low to make any sense mining it, especially when coupled with the very low value. Dev i think you need to rework the rewards otherwise this coin is completely dead....sorry... i hope you have a re-think. J Why?? the project is out we d`not need always HARDFORKS and updates like the other coins, the code is very good needs low resources and the coin is running well. Pool Payout is 94% we have a fee of 6% for PRUX, because PRUX is with 3 SECOND TARGET VERY FAST (and it was from the beginning a experiment, but now it is reality) WE LET It RUN AS IT IS. IF you think the Fees of the only one pool are to high? You can very easy do some solo-mining and you get 100%, or you open your own pool i`am happy with. (And you will see, it is not so easy to have a ultra fast pool with PRUX and you will see you have to set minimum 6% FEE ) The OP says it has a block time of three seconds, and you can send and confirm a transaction in 3 seconds. Does that mean each transaction only needs one confirmation? Isn't relying on one confirmation dangerous and make PRUX susceptible to attacks? With Core Wallet it think you it needs between 2-12 second before you can use the money for next transfer.I was thinking about that an that. For more security actual it is set to 20 for FULL confirmed tx, because actually the total Hash of Prux is without that possible to CHEAT. But with the core Wallet you can use reuse a reward between 2-12 seconds. I will do some test in future to give more specified details about, sorry. PRUX was only a lucky experiment...all here say thats no possible with Bitcoin/Litecoin fork ;-)
|
|
|
|
Merratzz (OP)
|
|
January 23, 2018, 06:02:23 PM |
|
Why did block reward very low. Just is 0.000875 PRUX per block. It does not look worth it for miner.
Hi guys, I have mined this coin right from the beginning, and much as i have always supported it, i too agree, the reward is simply to low to make any sense mining it, especially when coupled with the very low value. Dev i think you need to rework the rewards otherwise this coin is completely dead....sorry... i hope you have a re-think. J Why?? the project is out we d`not need always HARDFORKS and updates like the other coins, the code is very good needs low resources and the coin is running well. Pool Payout is 94% we have a fee of 6% for PRUX, because PRUX is with 3 SECOND TARGET VERY FAST (and it was from the beginning a experiment, but now it is reality) WE LET It RUN AS IT IS. IF you think the Fees of the only one pool are to high? You can very easy do some solo-mining and you get 100%, or you open your own pool i`am happy with. (And you will see, it is not so easy to have a ultra fast pool with PRUX and you will see you have to set minimum 6% FEE ) The OP says it has a block time of three seconds, and you can send and confirm a transaction in 3 seconds. Does that mean each transaction only needs one confirmation? Isn't relying on one confirmation dangerous and make PRUX susceptible to attacks? And i write over there "with 3 SECOND TARGET VERY FAST" maybe it should call "PRUX with 3 SECOND Block target"
|
|
|
|
suspiciously square
Jr. Member
Offline
Activity: 59
Merit: 3
|
|
January 23, 2018, 09:38:50 PM |
|
Why did block reward very low. Just is 0.000875 PRUX per block. It does not look worth it for miner.
Hi guys, I have mined this coin right from the beginning, and much as i have always supported it, i too agree, the reward is simply to low to make any sense mining it, especially when coupled with the very low value. Dev i think you need to rework the rewards otherwise this coin is completely dead....sorry... i hope you have a re-think. J Why?? the project is out we d`not need always HARDFORKS and updates like the other coins, the code is very good needs low resources and the coin is running well. Pool Payout is 94% we have a fee of 6% for PRUX, because PRUX is with 3 SECOND TARGET VERY FAST (and it was from the beginning a experiment, but now it is reality) WE LET It RUN AS IT IS. IF you think the Fees of the only one pool are to high? You can very easy do some solo-mining and you get 100%, or you open your own pool i`am happy with. (And you will see, it is not so easy to have a ultra fast pool with PRUX and you will see you have to set minimum 6% FEE ) The OP says it has a block time of three seconds, and you can send and confirm a transaction in 3 seconds. Does that mean each transaction only needs one confirmation? Isn't relying on one confirmation dangerous and make PRUX susceptible to attacks? And i write over there "with 3 SECOND TARGET VERY FAST" maybe it should call "PRUX with 3 SECOND Block target" That would sound better. There's also a spelling mistake you could correct in the OP, the word "witch" should be spelled "which". PRUX is a ultra fast Crypto Currency witch send and confirm a normal transaction in the time of 3 seconds (like pay with Mastercard / VISA or something else)
|
|
|
|
Merratzz (OP)
|
|
January 23, 2018, 10:12:42 PM |
|
|
|
|
|
Merratzz (OP)
|
|
January 23, 2018, 10:14:36 PM |
|
We changed Our MiningPool Server to New Hardware ( Xeon1230v6, 32gb DDR4 Ram, 480GB SSD in RAID and GIGABIT Upload!! )
Now We are online agian. Algo: Scrypt stratum+tcp://85.214.211.186:3433 -u YOUR_WALLET_ADDRESS -p c=PRUX Thank you much, please all PRUX miners we have to split the HASH to our to main pool
AND http://bitcoin-pool.de has 0% FEE a good time to begin with mining now ;-)
|
|
|
|
naivewu
Member
Offline
Activity: 167
Merit: 10
|
|
January 25, 2018, 05:31:21 AM |
|
Under ubantutn14.0, I can not create a wallet. Have more detailed tutorials? In addition, when the release of the wallet under windows
|
|
|
|
Merratzz (OP)
|
|
January 26, 2018, 06:31:54 PM |
|
Is there any opportunity to get free tokens?
You can get free token... Today give away. We spend to 40 new PRUX Wallet installer 20 PRUX for each How to get free PRUX COINS/TOKENS 1) You have to be a user with more then 30 activities on Bitcointalk ! 2) You have to post in this tread here a screen-shot of running prux-qt go to Help to Debug a give us here a screen-shot ! AND if you succesfull with all that you can send also your PRUX address here..
|
|
|
|
azzalea25
Member
Offline
Activity: 310
Merit: 13
|
|
January 26, 2018, 11:20:12 PM Last edit: January 27, 2018, 09:58:58 AM by azzalea25 |
|
Is the project still live?
Yes sure PRUX is alive, but we need help with the Windows Wallet, actually it is only available for Linux. Maybee MS Win is to slow for PRUX ;-P?! POOL here https://yiimp.mastermining.net/site/mining
Trading here https://tradesatoshi.com First Block Half ( not much Time to earn valve of PRUX ) NEXT BLOCK half in about 83.21 Days from 0.0095 PRUX to 0.00475 PRUXWHEN I GET PAYOUT? These my stats: Balance 116.01364591 PRUX Total Unpaid 117.74992931 PRUX Total Paid 0.05912754 PRUX Total Earned 117.80905685 PRUX * approximate from current exchange rates Note: Minimum payout for this wallet is 0.01 PRUX Last 24 Hours Payouts: P9U91JM2xQZbe4iMUjS4cCoHxS4pQGMxg7 Time Amount Tx 17h ago 0.00985459 a9182b2070214243409d3a0edc96708be9a5... 17h ago 0.00985459 5324d9c3d8da7c7fee4f216280dffc42bd0b... 17h ago 0.01970918 d88a4bef06f96973ea8eccabe6164083a244... 17h ago 0.01970918 f633c4ceef6828b349e1338249fb1bfb0e5b... Total: 0.05912754 My last payout is 17hour ago..WTF
|
|
|
|
azzalea25
Member
Offline
Activity: 310
Merit: 13
|
|
January 27, 2018, 09:58:10 AM |
|
finally i get payment after wait 24 hours, but why so long?
|
|
|
|
azzalea25
Member
Offline
Activity: 310
Merit: 13
|
|
January 27, 2018, 10:30:48 AM |
|
Nice! payment TH run correctly!
|
|
|
|
Merratzz (OP)
|
|
January 27, 2018, 10:39:11 AM |
|
finally i get payment after wait 24 hours, but why so long? Sorry for the long waiting time the pool is not 24/7H supported, but we do always our Payouts correctly. There was a cronjob hanging. All Payouts done now correctly and we use the sendmany function to send much bigger amount ion one tx.
|
|
|
|
azzalea25
Member
Offline
Activity: 310
Merit: 13
|
|
January 27, 2018, 12:01:34 PM |
|
finally i get payment after wait 24 hours, but why so long? Sorry for the long waiting time the pool is not 24/7H supported, but we do always our Payouts correctly. There was a cronjob hanging. All Payouts done now correctly and we use the sendmany function to send much bigger amount ion one tx. Nic job bro...
|
|
|
|
Merratzz (OP)
|
|
January 27, 2018, 05:04:12 PM Last edit: February 03, 2018, 08:39:15 AM by Merratzz |
|
Is there any opportunity to get free tokens?
You can get free token... Today give away. We spend to 40 new PRUX Wallet installer 20 PRUX for each How to get free PRUX COINS/TOKENS 1) You have to be a user with more then 30 activities on Bitcointalk ! 2) You have to post in this tread here a screen-shot of running prux-qt go to Help to Debug a give us here a screen-shot ! AND if you succesfull with all that you can send also your PRUX address here..
|
|
|
|
KevinMiles
Copper Member
Jr. Member
Offline
Activity: 110
Merit: 2
|
|
January 27, 2018, 10:29:11 PM |
|
Dev, this coin needs Windows wallet to expand its popularity.
|
|
|
|
Plenk
Newbie
Offline
Activity: 247
Merit: 0
|
|
January 28, 2018, 09:38:33 PM |
|
hey!!
can someone help me to install the wallet on Raspbian??
|
|
|
|
|