Signatum (skunk) ccminer-krnlx 30+mh 1070, 52.5+ mh 1080ti [FREE,OPENSOURCE]

[bigjee]

Here is a windows binary built from the source. No mods made. Just a build. Can confirm it works on my gtx 970 nothing else. As for hashrate it seemed a little lower than spmod3 but I was at i 16.
Here you go.

I uploaded to a few places
ufile<dot>io/haxxr

nofile<dot>io/f/yLsTJy3dL9a/ccminer.exe

cheers


Maybe? a tip? But not needed or necesary! Tip the dev better.
B8zNWAJiQ5AEVdLZJDZfiQ2WDxYy72w1RG

And here is the 64 bit release.
nofile<dot>io/f/s49HoBZTqW0/ccminer.exe

I tried this binary and it is 2-3 MHs slower than sp3 mod.
Intensity 18

Can someone please post a binary that gives 30+ Mh/s as is the title of this thread please.

[1714055920]

1714055920

[1714055920]

1714055920

[1714055920]

1714055920

[soothaa]

Thank you so much for this! My 1080tis are currently pushing 53-54 MHs and are running great! Hopefully SIGT stays stable enough for now for us all to continue mining it. Does anyone know when the next Block Reward reduction is? It is still currently 2500 I believe so the upcoming reduction will probably increase the price due to speculation, don't you think? Again, thank you dev for you great work - it is much appreciated and very good!

[thebigjdoe]

I'm trying to compile... Do we need visual studio 13?  or does community 2017 work also?  Thanks!

[bigjee]

I'm trying to compile... Do we need visual studio 13?  or does community 2017 work also?  Thanks!

I tried it with 2015. But getting errors. Takes a long time to download the updates with 2015.

[thebigjdoe]

Used the link to the 64 bit windows binary and getting ~25MH/s per 1070 in a 6 card rig

[BitPorium]

I'm trying to compile... Do we need visual studio 13?  or does community 2017 work also?  Thanks!

I used 2013

[chrysophylax]

nice work ...

#crysx

[notsure85]

so ive successfully compiled the code with vs2013.
when starting the miner i get an error "ptxas fatal : memory allocation failed".
All other ccminer flavors run flawlessly.
win7,x64,2x1080ti

edit: rebuild release/win32 version
~50mh on 1080ti 80% +190 core -502 mem

[MnngSprvsr]

can someone please share a build linux binary :-)

[Bibi187]

Anyone get 30mh/s on 1070 GTX ?
Can u share your setting please ?

[LackyHash]

thank krnlx - get 30.5 mh 1070 with 1900-2000 cclock and i 23

[apphero]

Great Work !!!

[2017-08-08 04:07:52] GPU #4: Gigabyte GTX 1080 Ti, 50.84 MH/s
[2017-08-08 04:07:53] GPU #0: Gigabyte GTX 1080 Ti, 51.90 MH/s
[2017-08-08 04:07:53] GPU #2: Gigabyte GTX 1080 Ti, 51.96 MH/s
[2017-08-08 04:07:53] GPU #6: Gigabyte GTX 1080 Ti, 51.37 MH/s
[2017-08-08 04:07:53] GPU #5: Gigabyte GTX 1080 Ti, 51.30 MH/s
[2017-08-08 04:07:53] GPU #7: Gigabyte GTX 1080 Ti, 49.10 MH/s
[2017-08-08 04:07:53] GPU #1: Gigabyte GTX 1080 Ti, 51.84 MH/s
[2017-08-08 04:08:02] GPU #3: Gigabyte GTX 1080 Ti, 54.06 MH/s
[2017-08-08 04:08:02] accepted: 99/100 (diff 1.306), 411.27 MH/s yes!
[2017-08-08 04:08:03] GPU #0: Gigabyte GTX 1080 Ti, 51.87 MH/s
[2017-08-08 04:08:03] GPU #2: Gigabyte GTX 1080 Ti, 51.75 MH/s
[2017-08-08 04:08:03] GPU #1: Gigabyte GTX 1080 Ti, 52.12 MH/s
[2017-08-08 04:08:03] GPU #5: Gigabyte GTX 1080 Ti, 51.36 MH/s
[2017-08-08 04:08:03] GPU #6: Gigabyte GTX 1080 Ti, 51.32 MH/s
[2017-08-08 04:08:04] GPU #4: Gigabyte GTX 1080 Ti, 50.66 MH/s
[2017-08-08 04:08:04] GPU #4: 1912 MHz 211.79 kH/W 239W 66C FAN 96%
[2017-08-08 04:08:04] GPU #7: Gigabyte GTX 1080 Ti, 48.91 MH/s
[2017-08-08 04:08:05] accepted: 100/101 (diff 1.424), 412.50 MH/s yes!
[2017-08-08 04:08:12] GPU #3: Gigabyte GTX 1080 Ti, 53.89 MH/s
[2017-08-08 04:08:14] GPU #0: Gigabyte GTX 1080 Ti, 51.96 MH/s
[2017-08-08 04:08:14] GPU #1: Gigabyte GTX 1080 Ti, 52.28 MH/s
[2017-08-08 04:08:14] GPU #2: Gigabyte GTX 1080 Ti, 51.93 MH/s
[2017-08-08 04:08:14] GPU #6: Gigabyte GTX 1080 Ti, 51.32 MH/s
[2017-08-08 04:08:14] GPU #5: Gigabyte GTX 1080 Ti, 51.16 MH/s
[2017-08-08 04:08:15] GPU #7: Gigabyte GTX 1080 Ti, 49.10 MH/s
[2017-08-08 04:08:15] accepted: 101/102 (diff 4.639), 412.48 MH/s yes!
[2017-08-08 04:08:16] GPU #4: Gigabyte GTX 1080 Ti, 50.67 MH/s
[2017-08-08 04:08:17] accepted: 102/103 (diff 1.442), 412.46 MH/s yes!

[Vetal_inside]

Wow man, nice!

At the moment - there is fastest skunk free/paid miner, that available to people.

add:
used binary from here:
5x1070 palit gamerock, +100-150 core, -500 mem, 100% tdp, intensity=22,25,25,25,25, Win8.1x64, 384.94 drivers
got ~146.12 mh

With spmod5 I had ~144.5md

[car1999]

I'm building it, do we need to add nvcc_ARCH += -gencode=arch=compute_61,code=\"sm_61,compute_61\" to Makefile.am?

[dbc23]

Here is a windows binary built from the source. No mods made. Just a build. Can confirm it works on my gtx 970 nothing else. As for hashrate it seemed a little lower than spmod3 but I was at i 16.
Here you go.

I uploaded to a few places
ufile<dot>io/haxxr

nofile<dot>io/f/yLsTJy3dL9a/ccminer.exe

cheers


Maybe? a tip? But not needed or necesary! Tip the dev better.
B8zNWAJiQ5AEVdLZJDZfiQ2WDxYy72w1RG

Thank you kind sir, for saving me compile time I shall give you a tip 

[car1999]

ubuntu 16.04 x64, cuda 8.0, build success, but run error:

Code:

*** ccminer skunk-krnlx for nVidia GPUs by tpruvot@github ***^M
    Built with the nVidia CUDA Toolkit 8.0 64-bits^M
^M
  Originally based on Christian Buchner and Christian H. project^M
  Include some algos from alexis78, djm34, sp, tsiv and klausT.^M
^M
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)^M
^M
[2017-08-07 18:25:35]^[[36m Starting on stratum+tcp://sigt.suprnova.cc:7106^[[0m^M
[2017-08-07 18:25:35] NVML GPU monitoring enabled.^[[0m^M
[2017-08-07 18:25:35] 9 miner threads started, using 'skunk' algorithm.^[[0m^M
[2017-08-07 18:25:37]^[[33m Stratum difficulty set to 1^[[0m^M
[2017-08-07 18:25:37]^[[36m skunk block 28639, diff 42363.553^[[0m^M
[2017-08-07 18:25:37] GPU #8: Intensity set to 18, 262144 cuda threads!!!!^[[0m^M
[2017-08-07 18:25:37] GPU #8: Intensity set to 18, 262144 cuda threads^[[0m^M
[2017-08-07 18:25:37] GPU #1: Intensity set to 19, 524288 cuda threads!!!!^[[0m^M
[2017-08-07 18:25:37] GPU #1: Intensity set to 19, 524288 cuda threads^[[0m^M
[2017-08-07 18:25:37] GPU #7: Intensity set to 18, 262144 cuda threads!!!!^[[0m^M
[2017-08-07 18:25:37] GPU #3: Intensity set to 19, 524288 cuda threads!!!!^[[0m^M
"screenlog.0" [Incomplete last line] 686 lines, 46946 characters
[2017-08-07 18:42:33] GPU #8: Intensity set to 18, 262144 cuda threads^[[0m^M
[2017-08-07 18:42:33] GPU #3: Intensity set to 19, 524288 cuda threads!!!!^[[0m^M
[2017-08-07 18:42:33] GPU #0: Intensity set to 19, 524288 cuda threads!!!!^[[0m^M
[2017-08-07 18:42:33] GPU #4: Intensity set to 19, 524288 cuda threads!!!!^[[0m^M
[2017-08-07 18:42:33] GPU #4: Intensity set to 19, 524288 cuda threads^[[0m^M
[2017-08-07 18:42:33] GPU #3: Intensity set to 19, 524288 cuda threads^[[0m^M
[2017-08-07 18:42:33] GPU #6: Intensity set to 18, 262144 cuda threads!!!!^[[0m^M
[2017-08-07 18:42:33] GPU #6: Intensity set to 18, 262144 cuda threads^[[0m^M
[2017-08-07 18:42:33] GPU #0: Intensity set to 19, 524288 cuda threads^[[0m^M
[2017-08-07 18:42:33] GPU #1: Intensity set to 19, 524288 cuda threads!!!!^[[0m^M
[2017-08-07 18:42:33] GPU #1: Intensity set to 19, 524288 cuda threads^[[0m^M
[2017-08-07 18:42:33] GPU #5: Intensity set to 18, 262144 cuda threads!!!!^[[0m^M
[2017-08-07 18:42:33] GPU #5: Intensity set to 18, 262144 cuda threads^[[0m^M
*** Error in `/home/m1/KXccminer/ccminer': double free or corruption (out): 0x00007f20497df920 ***^M
======= Backtrace: =========^M
/lib/x86_64-linux-gnu/libc.so.6(+0x777e5)[0x7f207b7357e5]^M
/lib/x86_64-linux-gnu/libc.so.6(+0x8037a)[0x7f207b73e37a]^M
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f207b74253c]^M
/usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x1fb23f)[0x7f207c74623f]^M
/usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x1013e3)[0x7f207c64c3e3]^M
/usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x25a338)[0x7f207c7a5338]^M
/usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x1f3c58)[0x7f207c73ec58]^M
/lib/x86_64-linux-gnu/libpthread.so.0(+0x76ba)[0x7f207dc336ba]^M
/lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f207b7c53dd]^M
======= Memory map: ========^M
00400000-025df000 r-xp 00000000 08:02 934810                             /home/m1/KXccminer/ccminer^M
027de000-027df000 r--p 021de000 08:02 934810                             /home/m1/KXccminer/ccminer^M
027df000-027e3000 rw-p 021df000 08:02 934810                             /home/m1/KXccminer/ccminer^M
027e3000-05890000 rw-p 00000000 00:00 0 ^M
0706c000-0710f000 rw-p 00000000 00:00 0                                  [heap]^M
200000000-200200000 rw-s 57aea000 00:06 467                              /dev/nvidiactl^M
200200000-200400000 rw-s 195e43000 00:06 467                             /dev/nvidiactl^M
...

[Brucelats]

I used binary posted here, both of them 32 and 64 bit one. They both run, i see command promt blink and it closes - CMD opens fast and closes fast.

I use win 10. Anyone got it working on win 10?

[car1999]

I used binary posted here, both of them 32 and 64 bit one. They both run, i see command promt blink and it closes - CMD opens fast and closes fast.

I use win 10. Anyone got it working on win 10?

add PAUSE to the bottom of your bat file and see what's the error.

[Brucelats]

I think i am doing something wrong. Never used CC miner. Do i need to download normal CC miner and then paste this modded exe file?

I tried use CC miner with only this 1 binary file posted here. 1 icon.

[Susch]

Code:

:loop
ccminer.exe -a skunk -o POOL_ADRESS -u WALLET -p x -i 25
goto loop

You must use a bat , just start ccminer.exe doesnt work.
No GUI.