Bitcoin Forum
November 25, 2020, 09:05:35 AM *
News: Latest Bitcoin Core release: 0.20.1 [Torrent]
 
   Home   Help Search Login Register More  
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [All]
  Print  
Author Topic: AMD Releases Driver for DAG Issue !!!  (Read 28793 times)
MATHReX
Sr. Member
****
Offline Offline

Activity: 880
Merit: 281


View Profile
August 15, 2017, 06:36:38 PM
Last edit: August 15, 2017, 06:48:55 PM by MATHReX
 #1

Well, AMD Released a driver for DAG issue, still have to experiment with this driver.
Try it out in your Radeon Rigs too and provide feedback for the same.

Link to the post, where I found it: http://www.legitreviews.com/amds-new-mining-block-chain-optimized-driver-tested_197095

Link to the beta drivers: https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx



I guess AMD won't release any updates to this driver, so this might be it.
1606295135
Hero Member
*
Offline Offline

Posts: 1606295135

View Profile Personal Message (Offline)

Ignore
1606295135
Reply with quote  #2

1606295135
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 15, 2017, 06:56:24 PM
 #2

Thanks for the update will give it try. Smiley
hagbase
Sr. Member
****
Offline Offline

Activity: 410
Merit: 254



View Profile
August 15, 2017, 07:02:12 PM
 #3

Rx570 @  27,2 mh/s ETH and 707 mh/s DCR with dcri 26 and claymore 9.8 dual mining.
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 15, 2017, 07:29:43 PM
 #4

My 580's got about 1.2Mh/s increase Solo mining Eth.  You'll have to use the new Beta afterburner to OC.  http://forums.guru3d.com/showpost.php?p=5459908&postcount=637
anders31
Newbie
*
Offline Offline

Activity: 53
Merit: 0


View Profile
August 15, 2017, 07:59:29 PM
 #5

i also found this http://1stminingrig.com/unofficial-amd-driver-fix-for-ethereum-dag-epoch-released/
it might be useful
doktor83
Hero Member
*****
Offline Offline

Activity: 1512
Merit: 611


View Profile WWW
August 15, 2017, 08:00:29 PM
 #6

i install on win7 before that ddu.
apply atikmdag patch.
reboot.
before going into windows, screen is black, and that's it.

SRBPolaris thread - HERE   |   SRBMiner-CN thread - HERE    |   SRBMiner-MULTI thread - HERE
http://www.srbminer.com
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 15, 2017, 08:02:00 PM
 #7


This driver at 1stminingrig isn't the official driver release.  This was the leaked one by robinhood which was posted on these forums a week ago.
kuttysark420
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
August 15, 2017, 08:06:18 PM
 #8

reboot again...


i install on win7 before that ddu.
apply atikmdag patch.
reboot.
before going into windows, screen is black, and that's it.
doktor83
Hero Member
*****
Offline Offline

Activity: 1512
Merit: 611


View Profile WWW
August 15, 2017, 08:09:40 PM
 #9

reboot again...


i install on win7 before that ddu.
apply atikmdag patch.
reboot.
before going into windows, screen is black, and that's it.

and again and again and again

SRBPolaris thread - HERE   |   SRBMiner-CN thread - HERE    |   SRBMiner-MULTI thread - HERE
http://www.srbminer.com
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 15, 2017, 08:12:14 PM
 #10

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue! Smiley

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 15, 2017, 08:12:37 PM
 #11

i install on win7 before that ddu.
apply atikmdag patch.
reboot.
before going into windows, screen is black, and that's it.

Maybe its time to install free win10?  Tongue
Orbolon
Member
**
Offline Offline

Activity: 77
Merit: 10

CoinCrate.net


View Profile WWW
August 15, 2017, 08:12:44 PM
 #12

Looks awesome, and is easier just to download it without doing any workarounds. Will see how it goes

doktor83
Hero Member
*****
Offline Offline

Activity: 1512
Merit: 611


View Profile WWW
August 15, 2017, 08:13:28 PM
 #13

6 card ETH rig went from ~139 MH/s ====> ~146 MH/s
6 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue! Smiley

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

so when working, everything is same like with robinhood's driver.

SRBPolaris thread - HERE   |   SRBMiner-CN thread - HERE    |   SRBMiner-MULTI thread - HERE
http://www.srbminer.com
Mattthev
Sr. Member
****
Offline Offline

Activity: 854
Merit: 358


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 15, 2017, 08:16:56 PM
 #14

That sounds promising, but did anybody find SDK for the Overdriven API??? We can make new WattTool for this driver.

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
anders31
Newbie
*
Offline Offline

Activity: 53
Merit: 0


View Profile
August 15, 2017, 08:17:20 PM
 #15

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue! Smiley

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

try -benchmark 140 or -benchmark 150 on your clymore miner and tell us the results please
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 15, 2017, 08:21:30 PM
 #16

6 card ETH rig went from ~139 MH/s ====> ~146 MH/s
6 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue! Smiley

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

so when working, everything is same like with robinhood's driver.

I don't know, I didn't try that one. These show up as driver version 22.19.659.0 in Device properties.

kuttysark420
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
August 15, 2017, 08:36:29 PM
 #17

drivers fucked my install up (did not do a full refresh, doing it now) 5x RX 480 8GB

I suggest wiping drivers completely before installing.

KaydenC
Sr. Member
****
Offline Offline

Activity: 613
Merit: 265



View Profile WWW
August 15, 2017, 08:39:12 PM
 #18

Does modded bios work out of the box for this driver?
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 15, 2017, 08:39:24 PM
 #19

drivers fucked my install up (did not do a full refresh, doing it now) 5x RX 480 8GB

I suggest wiping drivers completely before installing.



You should always do a clean removal in safe mode using DDU before installing new drivers.

Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 15, 2017, 08:40:22 PM
 #20

Does modded bios work out of the box for this driver?

You need to use the pixel patcher to bypass the signature check. Otherwise you will get the Code 43 error in Device Manager.
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 15, 2017, 08:42:00 PM
 #21

drivers fucked my install up (did not do a full refresh, doing it now) 5x RX 480 8GB

I suggest wiping drivers completely before installing.



lWhy would you overwrite old drivers?  This is just asking for trouble.
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 15, 2017, 08:46:50 PM
 #22

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue! Smiley

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

try -benchmark 140 or -benchmark 150 on your clymore miner and tell us the results please

I ran the benchmarks from epoch 150, 180 and 199 (the highest Claymore will let you benchmark). Stable hash rate was virtually identical except for some fluctuations which is normal.

Epoch 150:



Epoch 180



Epoch 199


P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 15, 2017, 08:51:33 PM
 #23

dipping to 22 from 30Mh/s isn't normal.
vodzilla
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 15, 2017, 08:52:30 PM
 #24

any link for ubuntu(amdgpu-pro)
anders31
Newbie
*
Offline Offline

Activity: 53
Merit: 0


View Profile
August 15, 2017, 08:58:14 PM
 #25

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue! Smiley

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

try -benchmark 140 or -benchmark 150 on your clymore miner and tell us the results please

I ran the benchmarks from epoch 150, 180 and 199 (the highest Claymore will let you benchmark). Stable hash rate was virtually identical except for some fluctuations which is normal.

Epoch 150:

https://imagize[Suspicious link removed]ageshack.us/a/img924/9948/XT6P4l.png

Epoch 180

https://imagize[Suspicious link removed]ageshack.us/a/img923/1371/DYvIhO.png

Epoch 199

https://imagize[Suspicious link removed]ageshack.us/a/img923/9623/u7GGwO.png


thnx for your effort i will try it on my rig also
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 15, 2017, 08:58:26 PM
Last edit: August 15, 2017, 09:10:24 PM by Vann
 #26

dipping to 22 from 30Mh/s isn't normal.

Benchmarks are synthetic figures, variations are normal when running  the same test. The stable hash was the same in all the tests and the real mining hash from the current ETH epoch 138 to the UBIQ epoch 6 was also the same.

ETH



UBIQ

vuli
Full Member
***
Offline Offline

Activity: 233
Merit: 100


Andrius | Junior Business developer at Unboxed ICO


View Profile WWW
August 15, 2017, 08:59:26 PM
 #27

is voltage adjusting working in Af beta 16 with this drivers? With that unofficial driver changing vgpu did't had any effect.

Unboxed - rowing community of people getting paid to do what they love to get a share of the $36 billion brands are spending annually on Facebook Ads
kuttysark420
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
August 15, 2017, 09:12:58 PM
 #28

yes that is still the case with a modded bios


also,


afterburner (beta) is having major issues with this driver ATM.


I can confirm though that the DAG issue has been resolved with RX 480 with this driver...

But cannot control fan speed or much of anything through 4.4.0 afterburner. I am going to try setting with Claymore next.
YIz
Hero Member
*****
Offline Offline

Activity: 672
Merit: 500


View Profile
August 15, 2017, 09:15:29 PM
 #29

Is there any improvement for ZEC?
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 15, 2017, 09:16:00 PM
 #30

yes that is still the case with a modded bios


also,


afterburner (beta) is having major issues with this driver ATM.


I can confirm though that the DAG issue has been resolved with RX 480 with this driver...

But cannot control fan speed or much of anything through 4.4.0 afterburner. I am going to try setting with Claymore next.


Beta 16 works fine for 580.
uDwcHYO
Full Member
***
Offline Offline

Activity: 363
Merit: 100


View Profile
August 15, 2017, 09:20:41 PM
 #31

What a good improvement, I hope nvidia will do something like that.

zzz
JustCauseBIH
Member
**
Offline Offline

Activity: 91
Merit: 10


View Profile
August 15, 2017, 09:26:29 PM
 #32

Nice, they did something for miners!
anders31
Newbie
*
Offline Offline

Activity: 53
Merit: 0


View Profile
August 15, 2017, 09:26:54 PM
 #33

What a good improvement, I hope nvidia will do something like that.
nvidia don't have a problem with the dag size
kuttysark420
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
August 15, 2017, 09:59:32 PM
 #34

Can confirm after DDU X2 (clean install, TWICE) fan controls and every single option works VIA CCC.


good job AMD.
Metroid
Sr. Member
****
Offline Offline

Activity: 1400
Merit: 318


Xtreme Monster


View Profile
August 15, 2017, 10:41:07 PM
 #35

The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
joe318
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
August 15, 2017, 10:46:40 PM
 #36

omg thank youuuuuu

win 8mh/s in one rx470 rig and 9 in one bastard rig Wink mix rx 570 and rx580 various brands.

and i feel both more cold than before, one of rx570 can mine in eth+dcr now, before this fix impossible, so much hot.

Regards,
adaseb
Legendary
*
Offline Offline

Activity: 2492
Merit: 1237



View Profile
August 15, 2017, 11:12:35 PM
 #37

Does this fix the DAG issue for the 7970/280X GPUS also?

280x should be like 27MH/s





.
.




░██████████████████░
████████████████████
█████████▀░░░███████
█████████░░▄████████
███████▀▀░░▀▀███████
███████▄▄░░▄▄███████
█████████░░█████████

█████████░░█████████

█████████▄▄█████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████▀▀▀█▀███
███░▀█████▀░░░░░▀███
███▌░░░▀▀▀░░░░░░████
████▄░░░░░░░░░░░████
█████▀░░░░░░░░░█████

██████▄░░░░░▄▄██████

█████▄▄▄▄███████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████████████
███████████▀▀░░▐████
███████▀▀░░░░░█████
████▀░░░▄█▀░░░▐█████
█████▄▄█▀░░░░░██████

███████▌▄▄▄▐██████

████████████████████

████████████████████

░██████████████████░
deepWebRun
Newbie
*
Offline Offline

Activity: 15
Merit: 0


View Profile
August 15, 2017, 11:38:32 PM
 #38

7x480 rig went from 186MHs to 203MHs.

Remove drivers in safe mode with DDU.
Restart
Install new drivers.
Restart
Patch with pixel patcher
Restart
Install the beta release of Afterburner, overclock
Run miner.
DarkMoonCBK
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile
August 16, 2017, 12:43:15 AM
 #39

How do you install the 8x570? Only 4 video cards can be identified
koody
Member
**
Offline Offline

Activity: 114
Merit: 20


View Profile
August 16, 2017, 12:45:54 AM
 #40

Thanks!
Harry5555
Member
**
Offline Offline

Activity: 81
Merit: 10


View Profile
August 16, 2017, 12:56:25 AM
 #41

I can confirm I pretty much got back my hashrate I had from the begining, Great job from AMD!

I am running a rx480 no bios mod

Best regards
Harry
jmigdlc99
Sr. Member
****
Offline Offline

Activity: 756
Merit: 282


View Profile WWW
August 16, 2017, 01:14:27 AM
 #42

What a good improvement, I hope nvidia will do something like that.

Actually, they have.

The latest 385.28 drivers released 2 days ago (Aug. 14) have added a "slight bump" in hash rates across most Nvidia GPUs.

Source:
https://www.reddit.com/r/EtherMining/comments/6tn65a/nvidia_38528_drivers_out_slight_bump_in_mhsec/

0xacBBa937A57ecE1298B5d350f40C0Eb16eC5fA4B
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 16, 2017, 01:21:04 AM
 #43

What a good improvement, I hope nvidia will do something like that.

Actually, they have.

The latest 385.28 drivers released 2 days ago (Aug. 14) have added a "slight bump" in hash rates across most Nvidia GPUs.

Source:
https://www.reddit.com/r/EtherMining/comments/6tn65a/nvidia_38528_drivers_out_slight_bump_in_mhsec/

2 idiots on reddit saying they saw improvement isnt really proof that this driver does anything new.
stoniestfool
Full Member
***
Offline Offline

Activity: 217
Merit: 100


View Profile
August 16, 2017, 01:21:57 AM
 #44

I have 4 gigabyte 570's. I have been dual mining dcri 30. Each card registers about 110 watts in hwinfo. I tried these drivers. My cards were over 160 watts in hwinfo. Even then the memory keeps dropping from 1999 to 1000. So I use 50 watts more but end up with a slower hashrate. Same memory drop problem was happing on my 6 gpu 470/480 Saffire rig. That was using robinhoods beta. I tried undervolting on these drivers. Unfortnattlly, my gpu will not stay stable unvolted or not. If I was able to increase the power limit that may fix it. Then I would be pulling over 50 watts more a card for a 2 mhs increase. I understand higher hash needs more power. That is just not worth it to me.
 I will try eth only on my 470/480 rig tomorrow. Those do not mine dcr very high anyway. So they increase in eth might be worth it. Hopefully, I can undervolt those some.
manotroll
Sr. Member
****
Offline Offline

Activity: 305
Merit: 250


View Profile
August 16, 2017, 01:32:50 AM
 #45

god
Skol600ml
Full Member
***
Offline Offline

Activity: 150
Merit: 100


View Profile
August 16, 2017, 01:42:49 AM
 #46

RX 580 Hynix with biosmod here.

Almost that same.

Unable to keep same oc, so reducing is the way to go (that solve the memory's halving problem). Reducing the oc gave me bad hashrate and yet more consumption than before.

Lot's of people talking about new hashrate nothing about consumption or dual mine.

Skol600ml
Full Member
***
Offline Offline

Activity: 150
Merit: 100


View Profile
August 16, 2017, 01:44:17 AM
 #47

What a good improvement, I hope nvidia will do something like that.

Actually, they have.

The latest 385.28 drivers released 2 days ago (Aug. 14) have added a "slight bump" in hash rates across most Nvidia GPUs.

Source:
https://www.reddit.com/r/EtherMining/comments/6tn65a/nvidia_38528_drivers_out_slight_bump_in_mhsec/

GTX 1070 owner here, that is bullshit as you can see in the comments.
koody
Member
**
Offline Offline

Activity: 114
Merit: 20


View Profile
August 16, 2017, 02:06:16 AM
 #48

RX 480 = Before 28.4  Mh/s - After 30.6 Mh/s Mining ETH
justchil
Member
**
Offline Offline

Activity: 92
Merit: 10


View Profile
August 16, 2017, 02:15:49 AM
 #49

Pretty much the same driver robinhood let out but with a legit installer.   Still have the same little issues... hoping they get fixed in the next release!
weitau
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 16, 2017, 02:23:38 AM
 #50

Claymore failed for me.

Was on 1.7.1 official (@25.1 Mhs), used DDU to remove, installed Robinh00d, worked great and got 2Mh/s better.
Tried this driver - used DDU in safe mode, install Mining driver, install pixel patcher, reboot.  AB beta works, but Claymore 9.8 fails to initialize.

XFX RX 480 4 GB BIOS, modded BIOS
Tmdz
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000


View Profile
August 16, 2017, 02:31:15 AM
 #51

Does not work on win 8.1

Pretty much bricked a rig installing this with win 8.1 but luckily there was a restore point.  So not sure how likely AMD is to release this for win 8.1, so that means if your like me then you will need to load a new OS on to the rigs (win 7 or 10) which seems super unnecessary just for a driver...
anders31
Newbie
*
Offline Offline

Activity: 53
Merit: 0


View Profile
August 16, 2017, 02:51:48 AM
 #52

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 16, 2017, 03:10:02 AM
 #53

How about Ethos user? how to install this driver on ethos/linux?
ILLCOMM
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
August 16, 2017, 03:19:04 AM
 #54

Here are my results using ethminer's benchmark mode. Clearly AMD dramatically lessened the DAG impact over time.

However, I too have power consumption issues. Consumption doubled (!) over my normal setup, presumably because I can no longer adjust memory voltage in WattTool. Is there another way to adjust memory voltage with these drivers?

Windows 10
RX470
CPU clock: 1100
Memory clock: 2000
Memory straps: 1650

*** OLD DRIVERS ***
22.19.171.1024

Block 0: 25.01 MH/s
Code:
ethminer -G -M
Trial 1... 25057242
Trial 2... 25123950
Trial 3... 24766765
Trial 4... 25032318
Trial 5... 25098893
min/mean/max: 24766765/25015833/25123950 H/s
inner mean: 25062817 H/s

Block 4,100,000: 23.57 MH/s (-5.7%)
Code:
ethminer -G -M 4100000
Trial 1... 23649475
Trial 2... 23649475
Trial 3... 23649475
Trial 4... 23649475
Trial 5... 23301688
min/mean/max: 23301688/23579917/23649475 H/s
inner mean: 7883158 H/s

*** NEW DRIVERS ***
22.19.659.0

Block 0 24.84 MH/s
Code:
ethminer -G -M
Trial 1... 25048928
Trial 2... 24742072
Trial 3... 24701027
Trial 4... 25040620
Trial 5... 24676465
min/mean/max: 24676465/24841822/25048928 H/s
inner mean: 24827906 H/s

Block 4,100,000 24.69 MH/s (-0.6%)
Code:
ethminer -G -M 4100000
Trial 1... 23989305
Trial 2... 24692834
Trial 3... 25040620
Trial 4... 25040620
Trial 5... 24692834
min/mean/max: 23989305/24691242/25040620 H/s
inner mean: 16577818 H/s
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 16, 2017, 03:41:17 AM
 #55

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??
alx_2009
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
August 16, 2017, 05:30:24 AM
 #56

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??
Yeap, in addition, claymore's does not start. Just Appcrash at start and that's all Sad
It seems, that only win 10 work.
doktor83
Hero Member
*****
Offline Offline

Activity: 1512
Merit: 611


View Profile WWW
August 16, 2017, 05:37:12 AM
 #57

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

Looks like.
I went back to robinhood drivers,they work on win7.

SRBPolaris thread - HERE   |   SRBMiner-CN thread - HERE    |   SRBMiner-MULTI thread - HERE
http://www.srbminer.com
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 16, 2017, 06:14:04 AM
 #58

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL
Tmdz
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000


View Profile
August 16, 2017, 06:17:19 AM
 #59

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL

I have the same problem on a win 8.1 rig with only 4 gpu so it is not the 6 gpu hack.
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 16, 2017, 06:22:49 AM
 #60

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL

I have the same problem on a win 8.1 rig with only 4 gpu so it is not the 6 gpu hack.

You use a driver for Win 10/7 in Win 8 nad wonder why it won't work?
doktor83
Hero Member
*****
Offline Offline

Activity: 1512
Merit: 611


View Profile WWW
August 16, 2017, 06:27:35 AM
 #61

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL

I have 3 gpu on my home computer, so no, it's not the 6gpu hack that is the problem.

SRBPolaris thread - HERE   |   SRBMiner-CN thread - HERE    |   SRBMiner-MULTI thread - HERE
http://www.srbminer.com
Tmdz
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000


View Profile
August 16, 2017, 06:44:23 AM
 #62

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL

I have the same problem on a win 8.1 rig with only 4 gpu so it is not the 6 gpu hack.

You use a driver for Win 10/7 in Win 8 nad wonder why it won't work?

I figured someone would be a smart ass  Cheesy

Win 8.1 is basically the same as win 7 and yes win 7 drivers from amd have worked before with no problem.
vanlong
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
August 16, 2017, 06:46:38 AM
 #63

dipping to 22 from 30Mh/s isn't normal.

Benchmarks are synthetic figures, variations are normal when running  the same test. The stable hash was the same in all the tests and the real mining hash from the current ETH epoch 138 to the UBIQ epoch 6 was also the same.

ETH

https://imagize[Suspicious link removed]ageshack.us/a/img924/5595/HJfVH6.png

UBIQ

https://imagize[Suspicious link removed]ageshack.us/a/img922/2628/8kAodY.png

Your vga card is what?
why your DCR speed very high?
my card MSI 480 4G hynix ram, miming dual ETH=173Mhs, DCR=867 Mhs
http://2.pik.vn/2017ecf297c1-dab7-42a6-8f4b-c36f95d520b5.png
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 16, 2017, 06:52:47 AM
Last edit: August 16, 2017, 07:07:59 AM by Vann
 #64

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL

I have the same problem on a win 8.1 rig with only 4 gpu so it is not the 6 gpu hack.

You use a driver for Win 10/7 in Win 8 nad wonder why it won't work?

I figured someone would be a smart ass  Cheesy

Win 8.1 is basically the same as win 7 and yes win 7 drivers from amd have worked before with no problem.

Why would they go through the trouble and expense of developing a seperate Windows 8.1 driver if that were the case? I haven't used Windows 8.1 for mining since 2014, but AFAIK, the Windows 8.1 AMD Polaris drivers have always been a problem for mining. There was also a major architectural change staring with the 17.7.2 drivers and there has been no 17.7.2 driver for Windows 8.1 realeased yet, like they were previously. That's also why the current Afterburner no longer works in 17.7.2 or with this driver.
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 16, 2017, 06:58:21 AM
 #65

dipping to 22 from 30Mh/s isn't normal.

Benchmarks are synthetic figures, variations are normal when running  the same test. The stable hash was the same in all the tests and the real mining hash from the current ETH epoch 138 to the UBIQ epoch 6 was also the same.

ETH



UBIQ



Your vga card is what?
why your DCR speed very high?
my card MSI 480 4G hynix ram, miming dual ETH=173Mhs, DCR=867 Mhs



For RX 580's, try increasing the DCR intensity to 32 in Claymore. That card is a Sapphire Nitro+ RX 580 8GB with Hynix memory and Anorak's Bios mod. 1115 MHz core, 2200 MHz memory overclock.
Tmdz
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000


View Profile
August 16, 2017, 07:15:10 AM
 #66

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

All win 7 user has this issue??

It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL

I have the same problem on a win 8.1 rig with only 4 gpu so it is not the 6 gpu hack.

You use a driver for Win 10/7 in Win 8 nad wonder why it won't work?

I figured someone would be a smart ass  Cheesy

Win 8.1 is basically the same as win 7 and yes win 7 drivers from amd have worked before with no problem.

Why would they go throuh the trouble and expense of developing a seperate Windows 8.1 driver if that was the case? I haven't used Windows 8.1 for mining since 2014, but AFAIK, the Windows 8.1 AMD Polaris drivers have always been a problem for mining. There was also a major architectural change staring with the 17.7.2 drivers and there has been no 17.7.2 driver for Windows 8.1 realeased yet, like they were previously. That's also why the current Afterburner no longer works in 17.7.2.

I have never had a problem mining on win 8.1 platform and these rigs have been running 24/7 for over a year and are super reliable.  They go through the trouble for gaming since that will be more problematic on different titles.  With mining meh if they load up then your golden, like I said I have used them at some time in the past and it worked just fine.  The problem I had is exactly the same as win 7 x64 users are having with these drivers, which is why I mentioned it.
Kumic
Full Member
***
Offline Offline

Activity: 518
Merit: 100



View Profile
August 16, 2017, 07:45:28 AM
 #67

With beta update that Robinh00d posted with dual mining eth+dcr, I got
on my 4x470 (Samsung) rig
Eth from 108mh to 117.5mh in total for
DCR from 2720mh to 2930mh in total
on my 4x570 rig
Eth from 108.5mh to 115.5mh in total
DCR from 2710mh to 2900mh in total
Those are average numbers.

Power consumption increased. I think, no matter how much was pulling from the wall before, with this speed increase I can reach max power consumption no problem. My 4x570 pulls 725w from the wall. If I lower power consumption I can instantly feel it on my hash rate speeds. Above 725w no go, just saying.

I am using windows 7.

I have to do more updates on other rigs, I hope that this official update is good too.

JustCauseBIH
Member
**
Offline Offline

Activity: 91
Merit: 10


View Profile
August 16, 2017, 08:26:30 AM
 #68

That is to much power usage for 4 cards. I have 5 and im using 650w at 300mh/s with old drivers.
dragonmike
Hero Member
*****
Offline Offline

Activity: 1190
Merit: 556


VEIL - PRIVACY WITHOUT COMPROMISE


View Profile
August 16, 2017, 09:06:52 AM
 #69

Can someone confirm that Wattman works with the new driver?
I wish I could use AB but it crashes my 7x-RX570 rigs.



▄▄                                  ▄▄
 ███▄                            ▄███
  ██████                      ██████
   ███████                  ███████
    ███████                ███████
     ███████              ███████
      ███████            ███████
       ███████▄▄      ▄▄███████
        ██████████████████████
         ████████████████████
          ██████████████████
           ████████████████
            ██████████████
             ███████████
              █████████
               ███████
                █████
                 ██
                  █
veil|     PRIVACY     
     WITHOUT COMPROMISE.       
▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂
|   NO ICO. NO PREMINE. 
   X16RT GPU Mining. Fair distribution.   
|      The first Zerocoin-based Cryptocurrency       
   WITH ALWAYS-ON PRIVACY.   
|



                   ▄▄████
              ▄▄████████▌
         ▄▄█████████▀███
    ▄▄██████████▀▀ ▄███▌
▄████████████▀▀  ▄█████
▀▀▀███████▀   ▄███████▌
      ██    ▄█████████
       █  ▄██████████▌
       █  ███████████
       █ ██▀ ▀██████▌
       ██▀     ▀████
                 ▀█▌




   ▄███████
   ████████
   ███▀
   ███
██████████
██████████
   ███
   ███
   ███
   ███
   ███
   ███




     ▄▄█▀▀ ▄▄▄▄▄▄▄▄ ▀▀█▄▄
   ▐██▄▄██████████████▄▄██▌
   ████████████████████████
  ▐████████████████████████▌
  ███████▀▀▀██████▀▀▀███████
 ▐██████     ████     ██████▌
 ███████     ████     ███████
▐████████▄▄▄██████▄▄▄████████▌
▐████████████████████████████▌
 █████▄▄▀▀▀▀██████▀▀▀▀▄▄█████
  ▀▀██████          ██████▀▀
      ▀▀▀            ▀▀▀
hagbase
Sr. Member
****
Offline Offline

Activity: 410
Merit: 254



View Profile
August 16, 2017, 09:08:21 AM
 #70

Yes, Wattman works.
dragonmike
Hero Member
*****
Offline Offline

Activity: 1190
Merit: 556


VEIL - PRIVACY WITHOUT COMPROMISE


View Profile
August 16, 2017, 09:17:50 AM
 #71

Yes, Wattman works.
Halleluiah.



▄▄                                  ▄▄
 ███▄                            ▄███
  ██████                      ██████
   ███████                  ███████
    ███████                ███████
     ███████              ███████
      ███████            ███████
       ███████▄▄      ▄▄███████
        ██████████████████████
         ████████████████████
          ██████████████████
           ████████████████
            ██████████████
             ███████████
              █████████
               ███████
                █████
                 ██
                  █
veil|     PRIVACY     
     WITHOUT COMPROMISE.       
▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂
|   NO ICO. NO PREMINE. 
   X16RT GPU Mining. Fair distribution.   
|      The first Zerocoin-based Cryptocurrency       
   WITH ALWAYS-ON PRIVACY.   
|



                   ▄▄████
              ▄▄████████▌
         ▄▄█████████▀███
    ▄▄██████████▀▀ ▄███▌
▄████████████▀▀  ▄█████
▀▀▀███████▀   ▄███████▌
      ██    ▄█████████
       █  ▄██████████▌
       █  ███████████
       █ ██▀ ▀██████▌
       ██▀     ▀████
                 ▀█▌




   ▄███████
   ████████
   ███▀
   ███
██████████
██████████
   ███
   ███
   ███
   ███
   ███
   ███




     ▄▄█▀▀ ▄▄▄▄▄▄▄▄ ▀▀█▄▄
   ▐██▄▄██████████████▄▄██▌
   ████████████████████████
  ▐████████████████████████▌
  ███████▀▀▀██████▀▀▀███████
 ▐██████     ████     ██████▌
 ███████     ████     ███████
▐████████▄▄▄██████▄▄▄████████▌
▐████████████████████████████▌
 █████▄▄▀▀▀▀██████▀▀▀▀▄▄█████
  ▀▀██████          ██████▀▀
      ▀▀▀            ▀▀▀
fenomenhaa
Sr. Member
****
Offline Offline

Activity: 248
Merit: 250



View Profile
August 16, 2017, 09:48:33 AM
 #72

What bout Wattool? is it working?


           ▄▀▀▀▄
   ▄▀▀▀▄   █   █   ▄▀▀▀▄
   █   █    ▀█▀    █   █
    ▀▀▀▀▄    ▀    ▄▀▀▀▀
DE]   ██▀▀▀█▄   ▀▀█   █
 ▀▀▀      ██▄▄▄█▀      ▀▀▀
        ▄   ▀ ▀   ▄
   ▄▀▀▀█     █     █▀▀▀▄
   █   █   ▄▀▀▀▄   █   █
    ▀▀▀    █   █    ▀▀▀
            ▀▀▀
          ▄▄█▄█▄[/color]
▄▀▀▀▄     ██   ██     ▄▀▀▀▄
█   █▀▀[color=#2C97
██████
██████
██████
██████
██████  ██████
██████  ██████
██████  ██████
██████  ██████  ██████
██████  ██████  ██████
██████  ██████  ██████
██████  ██████  ██████
██████  ██████  ██████
██████  ██████  ██████
✓  SUPER FAST TRANSACTION
✓  USER-FRIENDLY INTERFACE
✓  FAST & EASY REGISTRATION
▄██████
███▀▀▀▀
███
███
███
███
███
███
███
███
███
███▄▄▄▄
▀██████
JOIN AFFILIATE PROGRAM
UP TO 50% COMMISSIONS
██████▄
▀▀▀▀███
███
███
███
███
███
███
███
███
███
▄▄▄▄███
██████▀
nuky
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
August 16, 2017, 10:13:19 AM
 #73

Yes, Wattman works.

Are you sure? I can set the voltage with wattman, but it looks like a fake setting cause power consumption stay uge.
I tried with 2 x RX 470 XFX, I'll test with 6 x mixed 480/470 rig soon.
Mattthev
Sr. Member
****
Offline Offline

Activity: 854
Merit: 358


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 16, 2017, 10:50:46 AM
 #74

What bout Wattool? is it working?
Probably not, even 17.7.2 is not support the ADL API. If you find SDK or documentation for new ODN X2 API, we could make new OC utility.

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
hagbase
Sr. Member
****
Offline Offline

Activity: 410
Merit: 254



View Profile
August 16, 2017, 10:53:02 AM
 #75

At least it works für mem settings and FAN. Everthing else done in bios.

https://anorak.tech/c/downloads
drrobert
Full Member
***
Offline Offline

Activity: 129
Merit: 100


View Profile
August 16, 2017, 11:02:24 AM
 #76

Amd forgot linux version Huh  Huh
chronek
Sr. Member
****
Offline Offline

Activity: 275
Merit: 250


BD People Are Legend


View Profile
August 16, 2017, 11:33:26 AM
 #77

Wattool did not work for me (with official win7-crimson-relive-beta-blockchain-workloads-aug11 driver).
Trying set up OverdriveNTool like Wattool (http://forums.guru3d.com/showthread.php?t=416116) it setting something, but claymore crashing at start. Had anyone success with that?


                 ▄▄▄██████████████████▄▄▄
            ▄▄██▀▀▀▀▀███████████████████████▄▄
        ▄▄███▀   ▄▄▄   ▀████████████████████████▄▄
     ▄██████  ▄███████▄  ▀██████████████████▀▀▀█████▄
   ▄███████    ███▀▀ ██    ███████████  ███▀  ▄███████▄
  █████████▄  ▄█▀  ▄███    ██████████  ▄██  ▄███████████
 ██████████████▀  ████▀   ▄██▀▀▀████  ▄████▀  ███████████
██████████████▀  ▄███▀   ▄█▀  ▄▄ ██▀ ▄█  ██  █████████████
██████████████   ▀     ▄██▀  ▄█  █▀  █   █▀▄  ▀███████████
█████████████▀  ▄███▄  ▀██   ██ ▄▄▄  █▀ ▄▄▀█▄  ▀▄█████████
█████████████   █████   ▀██▄ ▀▄████▄  ▄███▄▀  ▄███████████
 █████   ▀██▀  ▄█████    █▀▀█████████████████▀███████████
  ████   ▄█▀   █████    ██ ▀▄█▀▄▄▀█ ▀▄▀█▀▄▀ █▀█ ▀▄██████
   ▀███▄▄   ▄█▄ ▀▀     ███ █ █ ▄▄▄█  █ █ █  █ █ ██████▀
     ▀██████████▄▄▄▄▄█████▄█▄██▄▄██ █▄███▄█▄█▄█▄████▀
        ▀▀██████████████████████████████████████▀▀
            ▀▀██████████████████████████████▀▀
                 ▀▀▀██████████████████▀▀▀
      Supported by
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
John McAfee     
|
|
|
|

   ▀██▄       ▀████▄
▄    ▀██          ▀██▄
██▄ ▄███         ▄█████▄▄
 ▀███████▄     ▄██▀ ▀▀████
      ▀████▄ ▄██▀     ▀█▀
        ▀████▄
        ▄█▀████▄
      ▄███▄▀▀████▄
    ▄████▀    ▀████▄
  ▄████▀        ▀██▀█▄
  ▀██▀            ▀██▀
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 16, 2017, 11:45:26 AM
 #78

Amd forgot linux version Huh  Huh

Yea we need fix for linux...
Kumic
Full Member
***
Offline Offline

Activity: 518
Merit: 100



View Profile
August 16, 2017, 12:34:44 PM
 #79

That is to much power usage for 4 cards. I have 5 and im using 650w at 300mh/s with old drivers.

I agree, as my colleague said maybe undervoting don't work or Claymore is the problem.

I will try to install official drivers version and see if there are improvements.

On my 4x470 rig (Samsung) power consumption is at 630 from the wall.
Note: when I installed everything I didn't get a good speed because memory scale was limited. So I opened settings in AB and under AMD compatibility properties menu I checked Extend official overclocking limits box. That gave me a little more scale on the memory clock.

bijot01
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
August 16, 2017, 12:51:31 PM
 #80

this drivers isn't a fix there is no control on tension for rx5xxx series
works fine for 480 but not for 470... lel
Kumic
Full Member
***
Offline Offline

Activity: 518
Merit: 100



View Profile
August 16, 2017, 12:55:46 PM
 #81

7x480 rig went from 186MHs to 203MHs.

Remove drivers in safe mode with DDU.
Restart
Install new drivers.
Restart
Patch with pixel patcher
Restart
Install the beta release of Afterburner, overclock
Run miner.

Thanks.
I think that System restore point is also good if something goes wrong. So I will do that first.

Hypernova
Newbie
*
Offline Offline

Activity: 3
Merit: 0


View Profile
August 16, 2017, 12:57:17 PM
 #82

Claymore just exits after "POOL/SOLO version" line, happens with 9.5 and 9.8. Any ideas?
chronek
Sr. Member
****
Offline Offline

Activity: 275
Merit: 250


BD People Are Legend


View Profile
August 16, 2017, 02:12:21 PM
 #83

Claymore just exits after "POOL/SOLO version" line, happens with 9.5 and 9.8. Any ideas?
I have Win7 and have the same issue with amd official drivers...


                 ▄▄▄██████████████████▄▄▄
            ▄▄██▀▀▀▀▀███████████████████████▄▄
        ▄▄███▀   ▄▄▄   ▀████████████████████████▄▄
     ▄██████  ▄███████▄  ▀██████████████████▀▀▀█████▄
   ▄███████    ███▀▀ ██    ███████████  ███▀  ▄███████▄
  █████████▄  ▄█▀  ▄███    ██████████  ▄██  ▄███████████
 ██████████████▀  ████▀   ▄██▀▀▀████  ▄████▀  ███████████
██████████████▀  ▄███▀   ▄█▀  ▄▄ ██▀ ▄█  ██  █████████████
██████████████   ▀     ▄██▀  ▄█  █▀  █   █▀▄  ▀███████████
█████████████▀  ▄███▄  ▀██   ██ ▄▄▄  █▀ ▄▄▀█▄  ▀▄█████████
█████████████   █████   ▀██▄ ▀▄████▄  ▄███▄▀  ▄███████████
 █████   ▀██▀  ▄█████    █▀▀█████████████████▀███████████
  ████   ▄█▀   █████    ██ ▀▄█▀▄▄▀█ ▀▄▀█▀▄▀ █▀█ ▀▄██████
   ▀███▄▄   ▄█▄ ▀▀     ███ █ █ ▄▄▄█  █ █ █  █ █ ██████▀
     ▀██████████▄▄▄▄▄█████▄█▄██▄▄██ █▄███▄█▄█▄█▄████▀
        ▀▀██████████████████████████████████████▀▀
            ▀▀██████████████████████████████▀▀
                 ▀▀▀██████████████████▀▀▀
      Supported by
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
John McAfee     
|
|
|
|

   ▀██▄       ▀████▄
▄    ▀██          ▀██▄
██▄ ▄███         ▄█████▄▄
 ▀███████▄     ▄██▀ ▀▀████
      ▀████▄ ▄██▀     ▀█▀
        ▀████▄
        ▄█▀████▄
      ▄███▄▀▀████▄
    ▄████▀    ▀████▄
  ▄████▀        ▀██▀█▄
  ▀██▀            ▀██▀
Luisjc69
Member
**
Offline Offline

Activity: 163
Merit: 10


View Profile
August 16, 2017, 02:53:32 PM
 #84

7x480 rig went from 186MHs to 203MHs.

Remove drivers in safe mode with DDU.
Restart
Install new drivers.
Restart
Patch with pixel patcher
Restart
Install the beta release of Afterburner, overclock
Run miner.

but the driver is not working with RX580 8gb, i make the same then you....and need 145W each card, before was 100W  Sad
Mattthev
Sr. Member
****
Offline Offline

Activity: 854
Merit: 358


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 16, 2017, 03:04:14 PM
 #85

At least it works für mem settings and FAN. Everthing else done in bios.

https://anorak.tech/c/downloads
Yeah Anorak's...  Roll Eyes Grin

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
hagbase
Sr. Member
****
Offline Offline

Activity: 410
Merit: 254



View Profile
August 16, 2017, 03:21:44 PM
 #86

At least it works für mem settings and FAN. Everthing else done in bios.

https://anorak.tech/c/downloads
Yeah Anorak's...  Roll Eyes Grin

Anything wrong with that?
PcChip
Sr. Member
****
Offline Offline

Activity: 418
Merit: 250


View Profile
August 16, 2017, 03:28:32 PM
 #87

Amd forgot linux version Huh  Huh

Yea we need fix for linux...

thinking about switching one of my ubuntu rigs to Win10 because of this

Legacy signature from 2011: 
All rates with Phoenix 1.50 / PhatK
5850 - 400 MH/s  |  5850 - 355 MH/s | 5830 - 310 MH/s  |  GTX570 - 115 MH/s | 5770 - 210 MH/s | 5770 - 200 MH/s
toptek
Legendary
*
Offline Offline

Activity: 1274
Merit: 1000


View Profile
August 16, 2017, 03:35:45 PM
 #88

I'm using it now , impressed ....

For security, your account has been locked. Email acctcomp15@theymos.e4ward.com
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 16, 2017, 03:43:05 PM
Last edit: August 16, 2017, 03:56:23 PM by Vann
 #89

Amd forgot linux version Huh  Huh

Yea we need fix for linux...

thinking about switching one of my ubuntu rigs to Win10 because of this

I wouldn't hold my breath. Official AMD support for Linux has been slow to almost non-existant since they moved to the AMDGPU Pro drivers. The official AMDGPU Pro drivers have yet to support GCN 1 & 2 cards in Linux despite having done so in Windows for YEARS, so you can't mix GCN 1 & 2 cards with newer cards using the official drivers.
dragonmike
Hero Member
*****
Offline Offline

Activity: 1190
Merit: 556


VEIL - PRIVACY WITHOUT COMPROMISE


View Profile
August 16, 2017, 03:58:20 PM
 #90

Anyone using RX 570's who can confirm Wattman works (including undervolting) with the new driver?



▄▄                                  ▄▄
 ███▄                            ▄███
  ██████                      ██████
   ███████                  ███████
    ███████                ███████
     ███████              ███████
      ███████            ███████
       ███████▄▄      ▄▄███████
        ██████████████████████
         ████████████████████
          ██████████████████
           ████████████████
            ██████████████
             ███████████
              █████████
               ███████
                █████
                 ██
                  █
veil|     PRIVACY     
     WITHOUT COMPROMISE.       
▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂
|   NO ICO. NO PREMINE. 
   X16RT GPU Mining. Fair distribution.   
|      The first Zerocoin-based Cryptocurrency       
   WITH ALWAYS-ON PRIVACY.   
|



                   ▄▄████
              ▄▄████████▌
         ▄▄█████████▀███
    ▄▄██████████▀▀ ▄███▌
▄████████████▀▀  ▄█████
▀▀▀███████▀   ▄███████▌
      ██    ▄█████████
       █  ▄██████████▌
       █  ███████████
       █ ██▀ ▀██████▌
       ██▀     ▀████
                 ▀█▌




   ▄███████
   ████████
   ███▀
   ███
██████████
██████████
   ███
   ███
   ███
   ███
   ███
   ███




     ▄▄█▀▀ ▄▄▄▄▄▄▄▄ ▀▀█▄▄
   ▐██▄▄██████████████▄▄██▌
   ████████████████████████
  ▐████████████████████████▌
  ███████▀▀▀██████▀▀▀███████
 ▐██████     ████     ██████▌
 ███████     ████     ███████
▐████████▄▄▄██████▄▄▄████████▌
▐████████████████████████████▌
 █████▄▄▀▀▀▀██████▀▀▀▀▄▄█████
  ▀▀██████          ██████▀▀
      ▀▀▀            ▀▀▀
glester
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
August 16, 2017, 04:08:50 PM
 #91

Amd forgot linux version Huh  Huh

Yea we need fix for linux...

thinking about switching one of my ubuntu rigs to Win10 because of this

No news on Linux drivers yet?..
ILLCOMM
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
August 16, 2017, 05:20:33 PM
Last edit: August 16, 2017, 05:33:17 PM by ILLCOMM
 #92

Wattman is not controlling voltages for me.

Per the screen shot I have GPU and memory voltages at 810mV. On old drivers (and using WattTool) I would see just under ~60w in SIV and roughly ~100w per card at the wall (after netting out the system draw). In this case I was pulling ~108w in SIV and ~150w from the wall for the card (after netting out the system draw). Dual mining adds about anther 20w in SIV (so, more at the wall).

Not good.

Windows 10
RX470

https://i.imgur.com/nwN1G08.png

(I can't figure out how to inline attach an image, sorry)
Documan
Newbie
*
Offline Offline

Activity: 60
Merit: 0


View Profile
August 16, 2017, 05:38:45 PM
 #93

Does it work with R9 nano?
fury420
Newbie
*
Offline Offline

Activity: 50
Merit: 0


View Profile
August 16, 2017, 05:53:26 PM
 #94

First rig I've attempted to update isn't working, Claymore crashes at

start building OpenCL program for GPU 0...

Seems to be a mix of the app force quitting, or the entire system crashing & rebooting.

Rig is running Win 7 with 4x 470 and 1x 380, with latest DDU used before driver install and pixel patcher + 6GPU mod used afterwards.
Same result using either ETH 9.8 (ETH-only mode) or ZEC 12.6

All cards are at default clocks, voltage, timings. Tried each card individually using -di flags, same result.
blockbasher
Newbie
*
Offline Offline

Activity: 31
Merit: 0


View Profile
August 16, 2017, 05:54:49 PM
 #95

Gigabyte RX 580 gaming 8G Hynix.   Bios modded, now running 31.3Mh/s from 29.6Mh/s but having major issues controlling anything.   Trying to adjust clocks or voltage with Claymore seems to make everything go to hell and afterburner 4.4 beta, only the fan control works.  
longjohnsilva
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
August 16, 2017, 06:50:37 PM
 #96

~2mh more per Card. RX480

But no control of GPU / RAM Clock or Volt.  Sad
I use WattTool
joaocha
Full Member
***
Offline Offline

Activity: 254
Merit: 100


View Profile
August 16, 2017, 07:03:36 PM
 #97

http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar
ltcsprite
Full Member
***
Offline Offline

Activity: 269
Merit: 101


View Profile
August 16, 2017, 07:20:38 PM
 #98

Got an extra 0.5 MH/s per card ,very disappointing, hash rates allover the place very unstable... bleh

rx 480s
IojkinKot
Newbie
*
Offline Offline

Activity: 63
Merit: 0


View Profile
August 16, 2017, 07:21:15 PM
 #99

Power consumption is too high on those drivers. Wait for fixed version
ipp2
Newbie
*
Offline Offline

Activity: 48
Merit: 0


View Profile
August 16, 2017, 07:32:53 PM
 #100

After 2 DDU uninstalls (one in safe mode) I was able to get everything working.

All of my cards are performing better (480,580 and 380x). The 380x went from around 20.5 to 21.5. I was a little surprised to see a bump on it also.

I could not control the voltage using any new or old programs beyond MSI afterburner 4.4 Beta 15 (and now I shall try 16).
Well that new program, overdrive 0.1.3 was able to change the core voltage but then it would revert back to the previous voltage after 2-120 seconds. Kind of strange.
It might be claymore doing it. I'm going to change voltage and then run claymore tonight.

As a side note, I fucking hate AMD drivers.
ltcsprite
Full Member
***
Offline Offline

Activity: 269
Merit: 101


View Profile
August 16, 2017, 07:34:18 PM
 #101

AMD sucks balls.

Za1n
Legendary
*
Offline Offline

Activity: 994
Merit: 1011



View Profile
August 16, 2017, 08:00:45 PM
 #102

Power consumption is too high on those drivers. Wait for fixed version

Confirmed, my power usage shot way up too with the new drivers and a lot of screwing around to get them to work with the modded BIOS, not worth the extra hash rate for the increased power usage.

Someone needs to clue AMD in that it's a balance, we could get this slightly increased hash rate before if we threw concerns about power consumption to the wind and just wanted to go all out and max our hash rate.

If AMD wants to be really helpful, they would not only give us a specific optimized mining driver (better than the current beta) but also AMD generated/approved VBIOS files that are highly optimized for mining as well.
ltcsprite
Full Member
***
Offline Offline

Activity: 269
Merit: 101


View Profile
August 16, 2017, 08:01:56 PM
 #103

Selling off 13 AMD cards let me know if u want this garbage.

 Grin
blockbasher
Newbie
*
Offline Offline

Activity: 31
Merit: 0


View Profile
August 16, 2017, 08:05:58 PM
 #104

I was able to get Afterburner beta 16 and after playing around with the power, the hash rates are all over the place.    High power it puts out 31 Mh/s stable for me but it's using way too much power for adding 1.5 more Mh/s...   Going to go back to older driver where I started... for now anyway
Za1n
Legendary
*
Offline Offline

Activity: 994
Merit: 1011



View Profile
August 16, 2017, 08:18:50 PM
 #105

Power consumption is too high on those drivers. Wait for fixed version

Confirmed, my power usage shot way up too with the new drivers and a lot of screwing around to get them to work with the modded BIOS, not worth the extra hash rate for the increased power usage.

Someone needs to clue AMD in that it's a balance, we could get this slightly increased hash rate before if we threw concerns about power consumption to the wind and just wanted to go all out and max our hash rate.

If AMD wants to be really helpful, they would not only give us a specific optimized mining driver (better than the current beta) but also AMD generated/approved VBIOS files that are highly optimized for mining as well.

Since I am a glutton for punishment, I thought I would try this on a couple of 480's with stock BIOS settings just in case my earlier results were due to an incompatibility introduced by the aforementioned modified BIOS files.

Nope, same dismal results, probably even a bit worse. I didn't have to fight with the drivers as much and could skip the pixel patcher step, but overall the results are still pretty bad. If you have free electricity and live somewhere near the North Pole this mod works wonders for keeping you warm while hashing, but for the rest of us its pretty much a pass.

The only hope is the AMD is at least trying to throw miners a bone, but it remains to be seen how successful they will ultimately be at it.
AnnoyingMosquito
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 16, 2017, 09:04:36 PM
 #106

Gigabyte RX 580 gaming 8G Hynix.   Bios modded, now running 31.3Mh/s from 29.6Mh/s but having major issues controlling anything.   Trying to adjust clocks or voltage with Claymore seems to make everything go to hell and afterburner 4.4 beta, only the fan control works.  
Update afterburner to 4.4.0 beta 15 -> works for me
justchil
Member
**
Offline Offline

Activity: 92
Merit: 10


View Profile
August 16, 2017, 09:55:18 PM
 #107

Gigabyte RX 580 gaming 8G Hynix.   Bios modded, now running 31.3Mh/s from 29.6Mh/s but having major issues controlling anything.   Trying to adjust clocks or voltage with Claymore seems to make everything go to hell and afterburner 4.4 beta, only the fan control works.  
Update afterburner to 4.4.0 beta 15 -> works for me

Some cards work fine some it has little or no control.   I've tried beta 15 and 16.
Drawde
Member
**
Offline Offline

Activity: 87
Merit: 11


View Profile
August 16, 2017, 10:33:36 PM
 #108

I ran DDU in normal rather than safe mode and everything went fine. My XFX 580's went from 26.5 back up to 29.7 like they had been running when I first got them.

illanz
Newbie
*
Offline Offline

Activity: 40
Merit: 0


View Profile
August 16, 2017, 10:40:08 PM
Last edit: August 16, 2017, 11:13:36 PM by illanz
 #109

OK OK

I managed to make it work...

Curiously, I have an ultra increase on my last GPU :

ETH: GPU0 28.648 Mh/s, GPU1 29.790 Mh/s, GPU2 29.061 Mh/s, GPU3 29.903 Mh/s, GPU4 29.681 Mh/s, GPU5 31.774 Mh/s

31,7 WOW ...

All OC settings are sync inside AB, this GPU remains over 31.5 solid, but the other ones vary between 27 and 29....

How could I reach the same hashrate on all GPUs  Huh

RX580 Sapphire Nitro + 8 Gb , Bios Mod From 1stMining Rig
afm
Newbie
*
Offline Offline

Activity: 12
Merit: 0


View Profile
August 16, 2017, 11:07:14 PM
 #110

This driver breaks every mining app I have.  Huh

http://puu.sh/xbU0c/befddd85fe.png
chronek
Sr. Member
****
Offline Offline

Activity: 275
Merit: 250


BD People Are Legend


View Profile
August 16, 2017, 11:17:54 PM
Last edit: August 16, 2017, 11:42:24 PM by chronek
 #111

so...
- ati official driver do not work with windows 7, but work good on windows 10 (i have win7)
- unofficial modded driver work good on win7 and win 10 (but can not be sure if it is clean)
- both drivers break overclock compability, wattool and afterburner not work (even with new beta afterburner it not change everything)
- overdriveNtool work for new driver, have voltage but have no offset
- peoples saw increase of power, but it is just result of broken oc tools, they do not change voltage
conclusion - i will stay on old driver and wait for problems to go away ..


                 ▄▄▄██████████████████▄▄▄
            ▄▄██▀▀▀▀▀███████████████████████▄▄
        ▄▄███▀   ▄▄▄   ▀████████████████████████▄▄
     ▄██████  ▄███████▄  ▀██████████████████▀▀▀█████▄
   ▄███████    ███▀▀ ██    ███████████  ███▀  ▄███████▄
  █████████▄  ▄█▀  ▄███    ██████████  ▄██  ▄███████████
 ██████████████▀  ████▀   ▄██▀▀▀████  ▄████▀  ███████████
██████████████▀  ▄███▀   ▄█▀  ▄▄ ██▀ ▄█  ██  █████████████
██████████████   ▀     ▄██▀  ▄█  █▀  █   █▀▄  ▀███████████
█████████████▀  ▄███▄  ▀██   ██ ▄▄▄  █▀ ▄▄▀█▄  ▀▄█████████
█████████████   █████   ▀██▄ ▀▄████▄  ▄███▄▀  ▄███████████
 █████   ▀██▀  ▄█████    █▀▀█████████████████▀███████████
  ████   ▄█▀   █████    ██ ▀▄█▀▄▄▀█ ▀▄▀█▀▄▀ █▀█ ▀▄██████
   ▀███▄▄   ▄█▄ ▀▀     ███ █ █ ▄▄▄█  █ █ █  █ █ ██████▀
     ▀██████████▄▄▄▄▄█████▄█▄██▄▄██ █▄███▄█▄█▄█▄████▀
        ▀▀██████████████████████████████████████▀▀
            ▀▀██████████████████████████████▀▀
                 ▀▀▀██████████████████▀▀▀
      Supported by
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
John McAfee     
|
|
|
|

   ▀██▄       ▀████▄
▄    ▀██          ▀██▄
██▄ ▄███         ▄█████▄▄
 ▀███████▄     ▄██▀ ▀▀████
      ▀████▄ ▄██▀     ▀█▀
        ▀████▄
        ▄█▀████▄
      ▄███▄▀▀████▄
    ▄████▀    ▀████▄
  ▄████▀        ▀██▀█▄
  ▀██▀            ▀██▀
kellypb01
Newbie
*
Offline Offline

Activity: 32
Merit: 0


View Profile
August 17, 2017, 12:57:05 AM
 #112

changing voltage doesnt seems to work in AB and even in wattman. Im always getting 120-130 watts in GPUz but the hashrate do increased from 29.3 to 30.
fury420
Newbie
*
Offline Offline

Activity: 50
Merit: 0


View Profile
August 17, 2017, 01:05:26 AM
 #113

so...
- ati official driver do not work with windows 7, but work good on windows 10 (i have win7)
- unofficial modded driver work good on win7 and win 10 (but can not be sure if it is clean)
- both drivers break overclock compability, wattool and afterburner not work (even with new beta afterburner it not change everything)
- overdriveNtool work for new driver, have voltage but have no offset
- peoples saw increase of power, but it is just result of broken oc tools, they do not change voltage
conclusion - i will stay on old driver and wait for problems to go away ..


I too could not get official driver to work with Win7, but the unofficial robinh00d driver works.

Afterburner beta #16 gave me clockspeed and voltage control for RX 470 and 480 using the robinh00d drivers
(have not tried with 570 yet)

Voltage changes are not applied immediately, takes effect when mining is paused/restarted.
Also it seems that changes to clocks end up resetting the effective voltage back to default, so make the voltage changes the final thing you apply.
kmarx
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
August 17, 2017, 01:39:54 AM
 #114

Drivers worked for me with some effort. Windows 10, 3 580 Gigabyte Aorus 8GB. Stock voltage was 1125mv.  

Out of the box, no luck with voltage control through Wattman. The Afterburner beta was able to bring the voltage down 96mv from stock, but it would quickly glitch and massively drop hashrate or hang.

Went in, flashed the bios with new voltages--875mv for each state, and I changed the top state from 1365mhz to 1125mhz. Raised memory speed to 2150mhz, stock memory timings.

Rebooted. Brought me down to 950mv.

I then went through Wattman again to change the memory controller voltage from 950mv to 875mv. Success! All three cards are again running at 1125/2150 and using 863mv. Temps and power consumption are now identical to what they were prior to the beta driver.

When I purchased the cards in May, each got around 26.7mh/s (~81mh/s total) under the above settings. That had dropped to ~24.5mh/s (~73mh/s total) prior to installing the beta drivers. Now, with the beta drivers, I'm back at 26.7mh/s (81mh/s total) over the last 24 hours.
skyglin
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
August 17, 2017, 06:31:39 AM
 #115

I confirm that power increase a lot after update.

I'm currently using Crimson ReLive Edition 17.7.1, my watt has been about ~870w, after update power shot up to anywhere from 1000w to 1300w.

Then I tried to downgrade to 17.7.2, watt did not decrease, that got me worry that something is wrong, since 17.7.2 is most recent stable version.

But after downgrade again to 17.7.1, my watt is stable again about ~870w.

So 17.7.2 and the blockchain beta version both eat away lot of power.

longjohnsilva
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
August 17, 2017, 06:35:44 AM
 #116

@kmarx

Wattmann sucks. Tried it a lot, but if any card hangs up all settings are reseted...
adaseb
Legendary
*
Offline Offline

Activity: 2492
Merit: 1237



View Profile
August 17, 2017, 07:26:05 AM
 #117

Win 7 definitely doesn't work. Wasted like 2 hours trying.






.
.




░██████████████████░
████████████████████
█████████▀░░░███████
█████████░░▄████████
███████▀▀░░▀▀███████
███████▄▄░░▄▄███████
█████████░░█████████

█████████░░█████████

█████████▄▄█████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████▀▀▀█▀███
███░▀█████▀░░░░░▀███
███▌░░░▀▀▀░░░░░░████
████▄░░░░░░░░░░░████
█████▀░░░░░░░░░█████

██████▄░░░░░▄▄██████

█████▄▄▄▄███████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████████████
███████████▀▀░░▐████
███████▀▀░░░░░█████
████▀░░░▄█▀░░░▐█████
█████▄▄█▀░░░░░██████

███████▌▄▄▄▐██████

████████████████████

████████████████████

░██████████████████░
doktor83
Hero Member
*****
Offline Offline

Activity: 1512
Merit: 611


View Profile WWW
August 17, 2017, 07:38:55 AM
 #118

so...
- ati official driver do not work with windows 7, but work good on windows 10 (i have win7)
- unofficial modded driver work good on win7 and win 10 (but can not be sure if it is clean)
- both drivers break overclock compability, wattool and afterburner not work (even with new beta afterburner it not change everything)
- overdriveNtool work for new driver, have voltage but have no offset
- peoples saw increase of power, but it is just result of broken oc tools, they do not change voltage
conclusion - i will stay on old driver and wait for problems to go away ..


This should go to the 1st page

SRBPolaris thread - HERE   |   SRBMiner-CN thread - HERE    |   SRBMiner-MULTI thread - HERE
http://www.srbminer.com
Metroid
Sr. Member
****
Offline Offline

Activity: 1400
Merit: 318


Xtreme Monster


View Profile
August 17, 2017, 07:54:44 AM
 #119


- unofficial modded driver work good on win7 and win 10 (but can not be sure if it is clean)

I would stay away from robinhood's driver, I mean is legit and all and I even did a throughout 100% check up, however nothing is sure. I would use the official driver from AMD. I'm grateful for robinhood's effort to share the driver.

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
odc
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
August 17, 2017, 08:04:46 AM
Last edit: August 17, 2017, 08:16:39 AM by odc
 #120

I am updating my rigs to the Blockchain Beta driver on windows 10.

6x MSI 470 8gb : DDU, driver install, patch, AB Beta 16, undervolting - OK!
6x MSI 570 4gb: DDU, driver install, patch, AB Beta 16, undervolting - OK!

6x MSI 580 8GB: problems:

DDU, driver install, patch, crashes, and had to add the cards one by one and let them get detected. but it only works for 5 cards!

I can't add the 6th card - "Thread stuck in device driver" when I reboot with the 6th card connected. The card works if I switch it with card n°5.

I can mine with pre-DAG slowdown hashrate with these 5 cards.

Does anyone else have this issue?
Does anyone have an idea?

Thanks for you kind help

diegomadureira
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 17, 2017, 02:54:27 PM
 #121

I'm testing with rx 570 4gb
I have 27,890mhz
Total power 4gpu = 650w
1112/1950
Mattthev
Sr. Member
****
Offline Offline

Activity: 854
Merit: 358


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 17, 2017, 05:10:38 PM
 #122

This driver breaks every mining app I have.  Huh


Have you used DDU? Try reinstall again, you may use DDU even twice.

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
Za1n
Legendary
*
Offline Offline

Activity: 994
Merit: 1011



View Profile
August 17, 2017, 06:06:03 PM
 #123

I ran DDU in normal rather than safe mode and everything went fine. My XFX 580's went from 26.5 back up to 29.7 like they had been running when I first got them.



I don't think the question is whether or not the drivers are able to increase the hashrate, as everyone pretty much agrees on this point. The question is does it increase the hashrate while maintaining the power saving measures many of us were previously running. These measures could include BIOS mods, overclocking, and undervolting.

So for everyone, the more helpful updates would include not only the fact that your hashrate returned to previous levels, but what was your pre-beta and post-beta power consumption readings and did you need to make any adjustments to return to normal levels.

For example, I have a RX580 8 GB that when I first got it I could get 30 MHs out of it at 122 watts. With the DAG issue it slowly crept down to ~27 MHs while still drawing 122 watts.

I then apply the Beta driver but need to revert some of the previous adjustments to make it work properly. I now am back to ~30 MHs in performance, but when I look at the power draw it is now using 150 watts.

So doing some simple math with the beta driver the card now consumes 5 watts of power for every 1 MHs of performance.

The pre-beta driver state it used only 4.5 watts for every 1 MHs of performance.

And the original state (where we all want to get back to) it required only 4.06 watts for every 1 MHs in performance.

So as you can see from the example, the beta driver (with adjustments to make it run stable) seems to draw roughly 0.5 to 1 whole extra watt for every 1 MHash it generates, which overtime can add up. At 30 MHs this is 30 watts extra per card, and in a 6 GPU rig it is 180 more watts. Since the new driver does not seem to work well with earlier BIOS mods or most overclocking and under-clocking settings most of us had in place prior, this is not really an improvement.
vapourminer
Legendary
*
Offline Offline

Activity: 3066
Merit: 1698


what is this "brake pedal" you speak of?


View Profile
August 17, 2017, 06:33:18 PM
 #124



I too could not get official driver to work with Win7


same here.. uninstall afterburner and delete settings, ddu, install driver, patch, win7 comes up recognizing all cards, but claymore 9.8 exits at the pool prompt.

vuli
Full Member
***
Offline Offline

Activity: 233
Merit: 100


Andrius | Junior Business developer at Unboxed ICO


View Profile WWW
August 17, 2017, 06:54:54 PM
 #125

hmja, even official driver, i don't know. This undervolting and power consumption is giving me grey hairs.

Unboxed - rowing community of people getting paid to do what they love to get a share of the $36 billion brands are spending annually on Facebook Ads
diegomadureira
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 17, 2017, 07:19:49 PM
 #126

afterburner beta running on rx 470 ASUS
I have 27mhz in 68w
jsanzsp
Newbie
*
Offline Offline

Activity: 73
Merit: 0


View Profile
August 17, 2017, 08:05:57 PM
 #127

afterburner beta running on rx 470 ASUS
I have 27mhz in 68w

Same here, AF 16 beta
adaseb
Legendary
*
Offline Offline

Activity: 2492
Merit: 1237



View Profile
August 17, 2017, 08:19:10 PM
 #128

Is it really required to DDU twice? I am pretty sure if it doesn't work once it won't work the second time.

The DDU takes like 15 mins and another 15 mins to actually install the driver.





.
.




░██████████████████░
████████████████████
█████████▀░░░███████
█████████░░▄████████
███████▀▀░░▀▀███████
███████▄▄░░▄▄███████
█████████░░█████████

█████████░░█████████

█████████▄▄█████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████▀▀▀█▀███
███░▀█████▀░░░░░▀███
███▌░░░▀▀▀░░░░░░████
████▄░░░░░░░░░░░████
█████▀░░░░░░░░░█████

██████▄░░░░░▄▄██████

█████▄▄▄▄███████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████████████
███████████▀▀░░▐████
███████▀▀░░░░░█████
████▀░░░▄█▀░░░▐█████
█████▄▄█▀░░░░░██████

███████▌▄▄▄▐██████

████████████████████

████████████████████

░██████████████████░
mrbugera2
Newbie
*
Offline Offline

Activity: 30
Merit: 0


View Profile
August 17, 2017, 08:45:29 PM
 #129

i installed but gpu 0, gets lower..

can you give me a good bios for rx480 8gb samsung? with stable hashes?
with core clock and memory clock options?

https://i.imgur.com/WM3vyzQ_d.jpg?maxwidth=640&shape=thumb&fidelity=high
afm
Newbie
*
Offline Offline

Activity: 12
Merit: 0


View Profile
August 17, 2017, 10:11:00 PM
 #130

I used the leaked beta driver and not the official one, it worked on Windows 7 x64!

RX 470's (Samsung Memory)

Before:
http://puu.sh/xcJoR/1e1c1b1dbf.png

After:
http://puu.sh/xcJrh/a6e0155152.png

This driver breaks every mining app I have.  Huh

http://puu.sh/xbU0c/befddd85fe.png
Have you used DDU? Try reinstall again, you may use DDU even twice.
mrbugera2
Newbie
*
Offline Offline

Activity: 30
Merit: 0


View Profile
August 17, 2017, 10:27:09 PM
 #131

i cant even change memory clock and core clock after installing beta driver..
mettalmag
Legendary
*
Offline Offline

Activity: 1076
Merit: 1003


≡v≡


View Profile
August 17, 2017, 10:49:01 PM
 #132

i cant even change memory clock and core clock after installing beta driver..
install afterburners beta version and you'll be able to change them

I tested it on RX4xx, RX5xx and on some older versions, so far so good

btw here's the beta of AB
http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar
mrbugera2
Newbie
*
Offline Offline

Activity: 30
Merit: 0


View Profile
August 17, 2017, 11:00:38 PM
 #133

i'll try it, do you have a bios for 480 8gb samsung?  Undecided
w0lf0.
Hero Member
*****
Offline Offline

Activity: 924
Merit: 508



View Profile
August 17, 2017, 11:08:24 PM
 #134

i'll try tomorrow with mine 4x msi 470s 4gb(all Samsung memory), any good firmware for these?
my firmware isn't good  Undecided

           ▀██▄ ▄██▀
            ▐█████▌
           ▄███▀███▄
         ▄████▄  ▀███▄
       ▄███▀ ▀██▄  ▀███▄
     ▄███▀  ▄█████▄  ▀███▄
   ▄███▀  ▄███▀ ▀███▄  ▀███▄
  ███▀  ▄████▌   ▐████▄  ▀███
 ███   ██▀  ██▄ ▄██  ▀██   ███
███   ███  ███   ███  ███   ███
███   ███   ███████   ███   ███
 ███   ███▄▄       ▄▄███   ███
  ███▄   ▀▀█████████▀▀   ▄███
   ▀████▄▄           ▄▄████▀
      ▀▀███████████████▀▀
DeepOnion
.Anonymous and Untraceable.
ANN  Whitepaper  Facebook  Twitter  Telegram  Discord 





      ▄▄██████████▄▄
    ▄███▀▀      ▀▀█▀   ▄▄
   ███▀              ▄███
  ███              ▄███▀   ▄▄
 ███▌  ▄▄▄▄      ▄███▀   ▄███
▐███  ██████   ▄███▀   ▄███▀
███▌ ███  ███▄███▀   ▄███▀
███▌ ███   ████▀   ▄███▀
███▌  ███   █▀   ▄███▀  ███
▐███   ███     ▄███▀   ███
 ███▌   ███  ▄███▀     ███
  ███    ██████▀      ███
   ███▄             ▄███
    ▀███▄▄       ▄▄███▀
      ▀▀███████████▀▀
.
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 17, 2017, 11:28:17 PM
 #135

Any fix for Linux user?
mrbugera2
Newbie
*
Offline Offline

Activity: 30
Merit: 0


View Profile
August 17, 2017, 11:33:03 PM
Last edit: August 18, 2017, 12:23:20 AM by mrbugera2
 #136

i cant even change memory clock and core clock after installing beta driver..
install afterburners beta version and you'll be able to change them

I tested it on RX4xx, RX5xx and on some older versions, so far so good

btw here's the beta of AB
http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar

thaaank you Smiley it helped..

i have 28 MHs Sad i think sapphire rx480 nitro + 8gb (SAMSUNG) must have more hashes Cheesy help guys to encrease Sad

https://image.ibb.co/bwjgEv/IMG_2878.jpg
https://image.ibb.co/jXwuZv/IMG_2879.jpg

and the power 115-120W
Skol600ml
Full Member
***
Offline Offline

Activity: 150
Merit: 100


View Profile
August 18, 2017, 03:21:09 AM
 #137

Any fix for Linux user?

It was release before linux itself, It's called Windows.
Metroid
Sr. Member
****
Offline Offline

Activity: 1400
Merit: 318


Xtreme Monster


View Profile
August 18, 2017, 03:57:57 AM
 #138

Any fix for Linux user?

It was release before linux itself, It's called Windows.

hehe. I hardly laugh but this was really funny.

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
Dlugina23
Sr. Member
****
Offline Offline

Activity: 504
Merit: 251



View Profile
August 18, 2017, 04:10:33 AM
 #139

Dag have issue in amd what about nvidia?
Metroid
Sr. Member
****
Offline Offline

Activity: 1400
Merit: 318


Xtreme Monster


View Profile
August 18, 2017, 04:54:25 AM
 #140

Dag have issue in amd what about nvidia?

amd have issue with dag and nvidia have issue with dog.:dog:

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 18, 2017, 08:14:52 AM
 #141

after upgrade this driver. seems it's not stable. drop & up & drop & up

PS: all rx 580 8G cards

Pennywis3
Full Member
***
Offline Offline

Activity: 329
Merit: 100


View Profile
August 18, 2017, 08:15:40 AM
 #142

Can you set clock & voltage in claymore with these drivers?
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 18, 2017, 08:23:03 AM
 #143

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000






descarte
Full Member
***
Offline Offline

Activity: 195
Merit: 100


View Profile
August 18, 2017, 08:31:33 AM
 #144

i can confirm power usage went up 80w with increase of 5 mhs. rig became unstable and adjusting voltage or power on my 580 would crash my rig consistently.

amd seriously need to be reading this.
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 18, 2017, 08:33:45 AM
 #145

Amd forgot linux version Huh  Huh

Yea we need fix for linux...

thinking about switching one of my ubuntu rigs to Win10 because of this

No news on Linux drivers yet?..

Can someone email AMD to ask linux driver?
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 18, 2017, 08:36:25 AM
 #146

i cant even change memory clock and core clock after installing beta driver..
install afterburners beta version and you'll be able to change them

I tested it on RX4xx, RX5xx and on some older versions, so far so good

btw here's the beta of AB
http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar

AB beta15 or 16? I tried on beta 15 works ok
Pennywis3
Full Member
***
Offline Offline

Activity: 329
Merit: 100


View Profile
August 18, 2017, 08:53:57 AM
 #147

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000



140W power draw??? Dude, thats way beyond 200W@the wall.
Pennywis3
Full Member
***
Offline Offline

Activity: 329
Merit: 100


View Profile
August 18, 2017, 08:54:31 AM
 #148

Can you set clock & voltage in claymore with these drivers?
Faboo005
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
August 18, 2017, 09:07:02 AM
 #149

Massive power use increase here also. So much so my R9 295X2 cards started melting all their wires, and my hash rate did not improve at all. Will have to roll back.

I highly recommend you don't install these on a 295X2 based rig.
Metroid
Sr. Member
****
Offline Offline

Activity: 1400
Merit: 318


Xtreme Monster


View Profile
August 18, 2017, 09:10:51 AM
 #150


AB beta15 or 16? I tried on beta 15 works ok

Always the latest.

Can you set clock & voltage in claymore with these drivers?

Yes.

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
Pennywis3
Full Member
***
Offline Offline

Activity: 329
Merit: 100


View Profile
August 18, 2017, 09:17:30 AM
 #151

Can you set clock & voltage in claymore with these drivers?
Yes.

Ok, tnx for the answer.
So the power usage should be exactly the same then, gonna try testing this out ( before suicide Smiley )

Metroid
Sr. Member
****
Offline Offline

Activity: 1400
Merit: 318


Xtreme Monster


View Profile
August 18, 2017, 11:17:33 AM
 #152

Ok, tnx for the answer.
So the power usage should be exactly the same then, gonna try testing this out ( before suicide Smiley )

Well almost the same, I found it to be better somehow.

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
viking1978
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
August 18, 2017, 12:17:18 PM
 #153

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000

https://i.imgur.com/PDITVaB.gif

I am having the exactly the same problem.  I did use DDU to uninstall the driver then re-installed the driver.
But nothing changed. Anyone can help.



viking1978
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
August 18, 2017, 12:27:50 PM
Last edit: August 18, 2017, 11:48:06 PM by viking1978
 #154

I did use DDU in safe mode to remove the driver then install new driver + atikmdag-patcher-1.4.5.

But I am having the exactly same problem as antiycda has. The memory clock is fluctuating between 1000MHz and 2080MHz which I overclocked in claymore.

All the cards are the same which include the following 3 model in my csae.

    1.MSI Radeon RX580 ARMOR 8G OC Graphics Card
    2.MSI Radeon RX 580 Gaming X 8G Graphics Card
    3.Sapphire Nitro RX580 8G

Anyone has figured out a solution about this?
https://i.imgur.com/ww3Dost.jpg
https://i.imgur.com/ojUGBZT.jpg

diegomadureira
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 18, 2017, 02:36:19 PM
 #155

What better power consumption in rx 570 4gb - 27.890mhz
I have 96w - 69c
1 RIG 4 RX 570 - 650w
1 RIG 3 RX 570 - 500w
Jitmad
Newbie
*
Offline Offline

Activity: 59
Merit: 0


View Profile
August 18, 2017, 02:43:31 PM
 #156

Massive power use increase here also. So much so my R9 295X2 cards started melting all their wires, and my hash rate did not improve at all. Will have to roll back.

I highly recommend you don't install these on a 295X2 based rig.

So it will not work on the R9 390 cards as well.
Vetal_inside
Member
**
Offline Offline

Activity: 78
Merit: 10


View Profile
August 18, 2017, 04:13:25 PM
 #157

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.8)...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards :(
vapourminer
Legendary
*
Offline Offline

Activity: 3066
Merit: 1698


what is this "brake pedal" you speak of?


View Profile
August 18, 2017, 06:04:17 PM
 #158

Massive power use increase here also. So much so my R9 295X2 cards started melting all their wires, and my hash rate did not improve at all. Will have to roll back.

I highly recommend you don't install these on a 295X2 based rig.

So it will not work on the R9 390 cards as well.

390s do not suffer from the dag issue. so no need for the new blockchain driver, its for polaris/vega.
koody
Member
**
Offline Offline

Activity: 114
Merit: 20


View Profile
August 18, 2017, 07:10:26 PM
 #159

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Where you found this driver for Windows 8.1? On AMD website i found just for windows 7 and windows 10.
totko
Newbie
*
Offline Offline

Activity: 34
Merit: 0


View Profile
August 18, 2017, 08:27:05 PM
 #160

I have tried but I have seen some new stuff, all 4 cards stop mining at the same time,rig becomes very unstable but for the 5 mins it hashed 29!
adaseb
Legendary
*
Offline Offline

Activity: 2492
Merit: 1237



View Profile
August 18, 2017, 09:07:03 PM
 #161

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Yeah if they fixed it on the 280x we would be getting 28MH/s with those old GPUs, but they only fixed it for the GPUs that they are currently selling. Greedy bastards.





.
.




░██████████████████░
████████████████████
█████████▀░░░███████
█████████░░▄████████
███████▀▀░░▀▀███████
███████▄▄░░▄▄███████
█████████░░█████████

█████████░░█████████

█████████▄▄█████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████▀▀▀█▀███
███░▀█████▀░░░░░▀███
███▌░░░▀▀▀░░░░░░████
████▄░░░░░░░░░░░████
█████▀░░░░░░░░░█████

██████▄░░░░░▄▄██████

█████▄▄▄▄███████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████████████
███████████▀▀░░▐████
███████▀▀░░░░░█████
████▀░░░▄█▀░░░▐█████
█████▄▄█▀░░░░░██████

███████▌▄▄▄▐██████

████████████████████

████████████████████

░██████████████████░
g0suboy
Newbie
*
Offline Offline

Activity: 27
Merit: 0


View Profile
August 18, 2017, 10:09:11 PM
 #162

I installed this driver on my first rig win10 3x rx570 msi armor oc 4gb,2x rx570 asus 4gb both cards hynix memory, bios mod straps from 1:1500 to 2000 and 2:1500 to 2000.

On earlier drivers my cards were giving around 25mhs with 1130/1950 clock. Everything over 1950 clock would hang the card in opengl or 511 celzius error or just bsod. Tryed all sort of drivers 17.5.1,17.7.1,17.7.2, mix of 17.5.1 and 16.11.5 everything and nothing helped to get mem clock over 1950.

After installing this driver, ddu,patch,msi ab 16 i couldnt clock the cards, clock settings applyed only for gpu0. Not even fan control for the rest of the cards. Then i restarted and tryed to open msi ab first then claymore miner and i got bsod (video integrity check failoure smth like that) then i relized i needed to start clay 9.8 first then ab but still settings could be applyed only for gpu0. Then i tryed to set core clock and mem clock in claymore bat file but was getting up n downs on memory from 1000 to 1950 (-mclock 1950).

After all that i installed msi ab 15 and guess what everything works as a charm.

Downvolting,cclock,mclock,fans everything and i can even set mclock higher without crashing, now running 1170/2000 getting over 28mhs per card.

This driver is blessing for me!
Gonna install on rest of my rigs with same cards and i hope everything will work like this one.

I was unsure about installing this driver sience many ppl said they had problems with it and boy am i glad i did it Smiley
Vetal_inside
Member
**
Offline Offline

Activity: 78
Merit: 10


View Profile
August 18, 2017, 11:11:19 PM
 #163

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Where you found this driver for Windows 8.1? On AMD website i found just for windows 7 and windows 10.
I used win7 driver on win8.1, with win 7 compatibility option during installing.


Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Yeah if they fixed it on the 280x we would be getting 28MH/s with those old GPUs, but they only fixed it for the GPUs that they are currently selling. Greedy bastards.
Exactly...
RfBTC
Member
**
Offline Offline

Activity: 78
Merit: 10


View Profile
August 18, 2017, 11:23:08 PM
 #164

What better power consumption in rx 570 4gb - 27.890mhz
I have 96w - 69c
1 RIG 4 RX 570 - 650w
1 RIG 3 RX 570 - 500w

I have x6  RX570 (27.15 / 27.20 Mhs  stable) with total  815w  (115w  x card + Mobo)


AMD always forgot Linux users    Sad Sad
speedyb
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
August 18, 2017, 11:39:21 PM
 #165

has anyone tried mining on a 2gb card with the new driver fix? wonder with more lanes if it be doable now. out of curiosity
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 18, 2017, 11:39:48 PM
 #166

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Where you found this driver for Windows 8.1? On AMD website i found just for windows 7 and windows 10.
I used win7 driver on win8.1, with win 7 compatibility option during installing.


Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Yeah if they fixed it on the 280x we would be getting 28MH/s with those old GPUs, but they only fixed it for the GPUs that they are currently selling. Greedy bastards.
Exactly...

What is wrong with using free windows 10?
rhaegonz
Newbie
*
Offline Offline

Activity: 65
Merit: 0


View Profile
August 18, 2017, 11:45:27 PM
 #167

I think people use more linux for mining than windows, especially people with many rigs, why the hell they did released for windows and not for linux?  Huh
Vetal_inside
Member
**
Offline Offline

Activity: 78
Merit: 10


View Profile
August 18, 2017, 11:57:26 PM
 #168

What is wrong with using free windows 10?
I think nothing...but I use win8.1 Smiley
Skol600ml
Full Member
***
Offline Offline

Activity: 150
Merit: 100


View Profile
August 19, 2017, 12:02:43 AM
 #169

For most users with huge consumption increase:

It's because undervolting isn't working for you - You need to set up all in BIOS, find another tool that works or wait for news.

For those with drops to half performance and wierd clocks, it's because mem clock drops from 2xxx to 1000 or core clock drops to 300-900, it's due to high consumption - It's because undervolting isn't working for you - You need to set up on BIOS, find another tool that works or wait for news.

Some cards works with Afterburner Beta 15/16 / Wattool and Claymore (clocks) (especially 4xx) , some don't (mostly 580).

The fix isn't a driver side OC to compensate. If you try ubiq (no dag problem) and ETC (worse than ETH) the hashrate will be the same, the fix is real. Yet some people may experience some consumption increase (not huge - 5%, 10%) or even consumption drop.
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 19, 2017, 01:41:27 AM
 #170

I think people use more linux for mining than windows, especially people with many rigs, why the hell they did released for windows and not for linux?  Huh

Yea right. Can someone contact AMD to get linux fix release?
weitau
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 19, 2017, 02:28:50 AM
 #171

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

Turn off Afterburner's setting to apply overclocks at startup.  You'll be in default settings on next reboot, then re-tune
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 19, 2017, 08:16:22 AM
 #172

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000



140W power draw??? Dude, thats way beyond 200W@the wall.

back to old driver. temp & power & hashrate


205T16
Newbie
*
Offline Offline

Activity: 2
Merit: 0


View Profile
August 19, 2017, 08:43:08 AM
 #173

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000

https://i.imgur.com/PDITVaB.gif

140W power draw??? Dude, thats way beyond 200W@the wall.

back to old driver. temp & power & hashrate

https://i.imgur.com/6S7CiiR.gif

Hello,

i the same problem, which the old driver use?

Thank you
seyyidkaya
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
August 19, 2017, 11:51:14 AM
 #174

Hi,
I have been running my rig with 4x powercolor rx 580 8gb, 2x rx 570 4gb and 1 sapphire rx 580 nitro + 8gb

after updating to this blockchain driver one of powercolor rx 580 card started to heat up very much. +5 degrees than others. I tried to run only with this card. same heat. reverted back to previous driver but heat still goes up to 75+ degrees. 4 cards are identical and only one of them causing this issue.

What do you guys think might cause the problem?
snuff28
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 19, 2017, 12:02:30 PM
 #175

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000

https://i.imgur.com/PDITVaB.gif

140W power draw??? Dude, thats way beyond 200W@the wall.

back to old driver. temp & power & hashrate

https://i.imgur.com/6S7CiiR.gif

Hello,

i the same problem, which the old driver use?

Thank you


I had same problem with memory going from 2200 to 1000, seems the the LCD TV I was hooked up to was causing the problem. It was also crashing the pc, switched to old monitor with lower resolution and solve the problem.

Have you tried the patch?
diegomadureira
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 19, 2017, 02:40:13 PM
 #176

Anyone know with teamviewer keep the big screen
After disconnecting hdmi cable from gpu, screen teamviewer gets small
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 19, 2017, 03:05:40 PM
 #177

Hi,
I have been running my rig with 4x powercolor rx 580 8gb, 2x rx 570 4gb and 1 sapphire rx 580 nitro + 8gb

after updating to this blockchain driver one of powercolor rx 580 card started to heat up very much. +5 degrees than others. I tried to run only with this card. same heat. reverted back to previous driver but heat still goes up to 75+ degrees. 4 cards are identical and only one of them causing this issue.

What do you guys think might cause the problem?

one of my rx580  hung . even i tried to install the old driver.

Metroid
Sr. Member
****
Offline Offline

Activity: 1400
Merit: 318


Xtreme Monster


View Profile
August 19, 2017, 03:10:10 PM
 #178

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Yeah if they fixed it on the 280x we would be getting 28MH/s with those old GPUs, but they only fixed it for the GPUs that they are currently selling. Greedy bastards.

I predicted this. People need to understand that if rx 580 was not polaris then rx 480 would never have got the fix, so amd is giving support for only what they are selling and that is it.

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
weitau
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 19, 2017, 03:42:06 PM
 #179

Claymore failed for me.

Was on 1.7.1 official (@25.1 Mhs), used DDU to remove, installed Robinh00d, worked great and got 2Mh/s better.
Tried this driver - used DDU in safe mode, install Mining driver, install pixel patcher, reboot.  AB beta works, but Claymore 9.8 fails to initialize.

XFX RX 480 4 GB BIOS, modded BIOS

Spent several hours trying all the following:
  • Reinstall all drivers (after removal using DDU Safemode
  • Reinstalling windows 7
  • Reinstalling 17.7.1
  • Update with beta driver from robinh00d
  • Rearranged my two GPUs to different PCI-e slots on the motherboard

Interestingly enough, the order of the graphics cards do make a difference.  Windows was not initializing them correctly, then I moved the riser'ed GPU to the other sideo of my GPU plugged directly on the motherboard.  Windows would boot, but get black screen after Windows logo appeared.

As of now, I am sticking with the beta driver (yeah I know) and happy to have AB working for 26.4 and 29.4 mh/s on my RX 480 cards.
Mattthev
Sr. Member
****
Offline Offline

Activity: 854
Merit: 358


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 19, 2017, 07:40:55 PM
 #180

Anyone know with teamviewer keep the big screen
After disconnecting hdmi cable from gpu, screen teamviewer gets small
Buy HDMI to VGA convertor.

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
coinnoob_za
Newbie
*
Offline Offline

Activity: 48
Merit: 0


View Profile
August 19, 2017, 10:02:24 PM
 #181

As far as i know this driver does not work on Win 7.

It does work on Win 10 for RX580's. Just dont patch the driver with pixel patcher on 580's.
I used AB 4.4.0 Beta 16, works for OC settings. It however does not seem to undervolt card.
Also do not set your OC settings in the Claymore Batch file. does not work. The Driver changed the ADL API so would need an update for Claymore to fix this.
I used Global Wattman that comes with driver. Manually setting Voltage to 990mV and apply, it applies it but sometimes just reverts back to higher voltage later. Just set it back to Auto and apply then my voltage goes to 990mV again. (i do this while claymore is running)
Not even AMD software is properly controlling the Voltage..... tisk tisk AMD!
When you apply the pixel patcher and OC from the claymore batch file you get your mem clock jumping between 2150 and 1000MHz the whole time.
EVen GPU-z is reading GPU load incorrectly at 16% and mem controller 100% when it should be idle. HWinfo64 seems to read the GPU load correctly.

Managed to get my card stable at 30.5MH/s (MSI RX580 Armor 8GB) 990mV, 1250 GPU core, 2150 Mem clocks. Drawing under 100W running at 59-61C Temps. Happy will settle for that.
If running other AMD cards in the machine, and settings dont apply to others it could be because the are running headless. Might need to plug in a dummy plug into cards to make it think it has monitor connected. i know this works. Have found this with Nvidia mixed with AMD machines.
All Nvidia no problem.

AMD wont update driver again, so Claymore will hopefully soon update to fix OC and undervolt issues directly from the Miner batch file.
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 20, 2017, 12:41:23 AM
 #182

As far as i know this driver does not work on Win 7.

It does work on Win 10 for RX580's. Just dont patch the driver with pixel patcher on 580's.
I used AB 4.4.0 Beta 16, works for OC settings. It however does not seem to undervolt card.
Also do not set your OC settings in the Claymore Batch file. does not work. The Driver changed the ADL API so would need an update for Claymore to fix this.
I used Global Wattman that comes with driver. Manually setting Voltage to 990mV and apply, it applies it but sometimes just reverts back to higher voltage later. Just set it back to Auto and apply then my voltage goes to 990mV again. (i do this while claymore is running)
Not even AMD software is properly controlling the Voltage..... tisk tisk AMD!
When you apply the pixel patcher and OC from the claymore batch file you get your mem clock jumping between 2150 and 1000MHz the whole time.
EVen GPU-z is reading GPU load incorrectly at 16% and mem controller 100% when it should be idle. HWinfo64 seems to read the GPU load correctly.

Managed to get my card stable at 30.5MH/s (MSI RX580 Armor 8GB) 990mV, 1250 GPU core, 2150 Mem clocks. Drawing under 100W running at 59-61C Temps. Happy will settle for that.
If running other AMD cards in the machine, and settings dont apply to others it could be because the are running headless. Might need to plug in a dummy plug into cards to make it think it has monitor connected. i know this works. Have found this with Nvidia mixed with AMD machines.
All Nvidia no problem.

AMD wont update driver again, so Claymore will hopefully soon update to fix OC and undervolt issues directly from the Miner batch file.

thanks

jackbox
Legendary
*
Online Online

Activity: 1134
Merit: 1024



View Profile
August 20, 2017, 01:36:52 AM
 #183

Anyone know with teamviewer keep the big screen
After disconnecting hdmi cable from gpu, screen teamviewer gets small
Buy HDMI to VGA convertor.

Buy and HDMI emulator dongle. When the computer reboots teamviewer will have a regular sized screen.

Buy a Trezor and Protect your BTC, BCH, BTG, DASH, LTC, DGB, ZEC, ETH and ETC from hackers.
If I was helpful please buy me a coffee BTC: 1DWK7vBaxcTC5Wd2nQwLGEoy8xdFVzGKLK  BTG: AWvN1iBqCUqG2tEh3XoVvRbdcGrAzfBBpW
If I was helpful please buy me a burger DGB: DLASV6CUQpGtGSyaVz5FYuu5YxZ17MoGQz
kiaas
Jr. Member
*
Offline Offline

Activity: 42
Merit: 12


View Profile
August 20, 2017, 03:11:30 AM
 #184

As far as i know this driver does not work on Win 7.

It does work on Win 10 for RX580's. Just dont patch the driver with pixel patcher on 580's.
I used AB 4.4.0 Beta 16, works for OC settings. It however does not seem to undervolt card.
Also do not set your OC settings in the Claymore Batch file. does not work. The Driver changed the ADL API so would need an update for Claymore to fix this.
I used Global Wattman that comes with driver. Manually setting Voltage to 990mV and apply, it applies it but sometimes just reverts back to higher voltage later. Just set it back to Auto and apply then my voltage goes to 990mV again. (i do this while claymore is running)
Not even AMD software is properly controlling the Voltage..... tisk tisk AMD!
When you apply the pixel patcher and OC from the claymore batch file you get your mem clock jumping between 2150 and 1000MHz the whole time.
EVen GPU-z is reading GPU load incorrectly at 16% and mem controller 100% when it should be idle. HWinfo64 seems to read the GPU load correctly.

Managed to get my card stable at 30.5MH/s (MSI RX580 Armor 8GB) 990mV, 1250 GPU core, 2150 Mem clocks. Drawing under 100W running at 59-61C Temps. Happy will settle for that.
If running other AMD cards in the machine, and settings dont apply to others it could be because the are running headless. Might need to plug in a dummy plug into cards to make it think it has monitor connected. i know this works. Have found this with Nvidia mixed with AMD machines.
All Nvidia no problem.

AMD wont update driver again, so Claymore will hopefully soon update to fix OC and undervolt issues directly from the Miner batch file.
I was just coming here to see why all my mining software just immediately crashed with it, since it is available for and installing on win7 fine, among other things that had my hopes up that there'd be something I could do to fix it. Oh well. :/
panosarp
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
August 20, 2017, 06:01:39 AM
 #185

The official AMD blockchain driver for windows 7 x64 does not work (miners crash).
The leaked driver from robinh00d works but nothing can undervolt my RX570's, only OverdriveNTool  works for a few seconds before reverting.

The solution that worked best is to use the leaked driver and the wattman from the official driver:

1.  Install the official amd driver with amd settings
2.  Without reboot install the leaked driver via device manager by going the "i have a disk" route (for all cards - one by one)
3.  If you have a modified bios, run atikmdag-patcher and reboot 
4.   Use wattman to apply your mem clock and volt settings
5. Open miner, everything will be ok except undervolt, now with miner running make a small change to wattman and reapply (for each card one by one)

The voltages appear to be sticking for as long as the miner is running , except for the main card that reverts occasionally.
 

QuintLeo
Legendary
*
Offline Offline

Activity: 1484
Merit: 1026


View Profile
August 20, 2017, 07:57:26 PM
 #186

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

 It didn't change because the R9 280x didn't suffer from the issue that the driver was intended to fix.
 The 280x was never a "truely good" ETH card in the first place - that was the 290 and to a lesser degree the 290x.

 Tahiti is arguably the best performance/price ratio for FP64 anyone ever released, but ETH doesn't use floating point....


I'm no longer legendary just in my own mind!
Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
QuintLeo
Legendary
*
Offline Offline

Activity: 1484
Merit: 1026


View Profile
August 20, 2017, 08:01:43 PM
 #187


What is wrong with using free windows 10?

 Why should I have to completely reinstall an OS from scratch on all my machines to run an OS I despise for it's built-in spyware issues and VERY POOR stability instead of sticking with my RELIABLE LINUX OS setup?

 Oh yeah, did I forget to mention "far easier to clone when building a NEW machine" using built-in LINUX "DD" command vs being forced to reinstall from scratch to do a "free" Win10 installation on a new machine?

 VERY FEW MINING RIGS RUN WINDOWS AT ALL - there are REASONS for that, and they ALL apply to bloody Windows 10.

I'm no longer legendary just in my own mind!
Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
P00P135
Full Member
***
Offline Offline

Activity: 910
Merit: 120


View Profile
August 20, 2017, 10:21:41 PM
 #188


What is wrong with using free windows 10?

 Why should I have to completely reinstall an OS from scratch on all my machines to run an OS I despise for it's built-in spyware issues and VERY POOR stability instead of sticking with my RELIABLE LINUX OS setup?

 Oh yeah, did I forget to mention "far easier to clone when building a NEW machine" using built-in LINUX "DD" command vs being forced to reinstall from scratch to do a "free" Win10 installation on a new machine?

 VERY FEW MINING RIGS RUN WINDOWS AT ALL - there are REASONS for that, and they ALL apply to bloody Windows 10.


Not sure why you are so angry lmao.  I was talking to the guy running windows 7 with a lot of issues. 
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 21, 2017, 01:13:06 AM
 #189

The official AMD blockchain driver for windows 7 x64 does not work (miners crash).
The leaked driver from robinh00d works but nothing can undervolt my RX570's, only OverdriveNTool  works for a few seconds before reverting.

The solution that worked best is to use the leaked driver and the wattman from the official driver:

1.  Install the official amd driver with amd settings
2.  Without reboot install the leaked driver via device manager by going the "i have a disk" route (for all cards - one by one)
3.  If you have a modified bios, run atikmdag-patcher and reboot 
4.   Use wattman to apply your mem clock and volt settings
5. Open miner, everything will be ok except undervolt, now with miner running make a small change to wattman and reapply (for each card one by one)

The voltages appear to be sticking for as long as the miner is running , except for the main card that reverts occasionally.
 



everything is works now. except the power with eth+SC almost sucks 140W.


Mattthev
Sr. Member
****
Offline Offline

Activity: 854
Merit: 358


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 21, 2017, 07:45:39 AM
 #190

Why should I have to completely reinstall an OS from scratch on all my machines to run an OS I despise for it's built-in spyware issues and VERY POOR stability instead of sticking with my RELIABLE LINUX OS setup?

 Oh yeah, did I forget to mention "far easier to clone when building a NEW machine" using built-in LINUX "DD" command vs being forced to reinstall from scratch to do a "free" Win10 installation on a new machine?

 VERY FEW MINING RIGS RUN WINDOWS AT ALL - there are REASONS for that, and they ALL apply to bloody Windows 10.

Very few? About 80% guys who contacts me are running Windows... most of them 10 but some of them 7.

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
nars28
Newbie
*
Offline Offline

Activity: 25
Merit: 0


View Profile
August 21, 2017, 08:28:09 AM
 #191

Beta Blockchain driver doesn't work for me. Miner crashes. So i installed latest non Beta driver on my rx570. i'm mining signatum so don't need the DAG solved driver  Cheesy
Chipychop
Member
**
Offline Offline

Activity: 91
Merit: 10


View Profile
August 21, 2017, 09:10:23 AM
 #192

@antycda and how much power consumption before these drivers?

I'd like to put a question for owners of rx 570 4gb. anyone has tested beta drivers on higher DAG epoch like #180?

I doubt wether mount 2 rx 570 rigs or one with gtx 1070

because rx 570 are 4gb model and maybe in future it will be too low to mine anything...

any idea?
spyshagg
Full Member
***
Offline Offline

Activity: 176
Merit: 100


View Profile
August 21, 2017, 10:16:16 AM
 #193

Power to hash ratio is more important right now.  I'm staying with the old driver until this driver works and undervolts as expected.
adaseb
Legendary
*
Offline Offline

Activity: 2492
Merit: 1237



View Profile
August 21, 2017, 10:55:08 AM
 #194

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

 It didn't change because the R9 280x didn't suffer from the issue that the driver was intended to fix.
 The 280x was never a "truely good" ETH card in the first place - that was the 290 and to a lesser degree the 290x.

 Tahiti is arguably the best performance/price ratio for FP64 anyone ever released, but ETH doesn't use floating point....



The 7970/280x was actually very good at ETH only at the beginning. With DaggerCoins at Epoch #0 or #1 or so it can get like 28MH/s. And a year ago you could of found them on Craigslist for $100 second hand. The R9 290 while it was a little faster was always expensive to buy because it had high demand for gamers and was hard to find for less than $200. So the 280x was a better choice if it wasn't for the DAG bug.





.
.




░██████████████████░
████████████████████
█████████▀░░░███████
█████████░░▄████████
███████▀▀░░▀▀███████
███████▄▄░░▄▄███████
█████████░░█████████

█████████░░█████████

█████████▄▄█████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████▀▀▀█▀███
███░▀█████▀░░░░░▀███
███▌░░░▀▀▀░░░░░░████
████▄░░░░░░░░░░░████
█████▀░░░░░░░░░█████

██████▄░░░░░▄▄██████

█████▄▄▄▄███████████

████████████████████

░██████████████████░
░██████████████████░
████████████████████
████████████████████
███████████▀▀░░▐████
███████▀▀░░░░░█████
████▀░░░▄█▀░░░▐█████
█████▄▄█▀░░░░░██████

███████▌▄▄▄▐██████

████████████████████

████████████████████

░██████████████████░
RentGPU
Sr. Member
****
Offline Offline

Activity: 616
Merit: 251


View Profile
August 21, 2017, 11:43:09 AM
 #195

Did it worked with win 7 , any confirmations?!

vapourminer
Legendary
*
Offline Offline

Activity: 3066
Merit: 1698


what is this "brake pedal" you speak of?


View Profile
August 21, 2017, 11:48:40 AM
 #196

Did it worked with win 7 , any confirmations?!

no.

on win7 either blank screen or if you get far enough claymore 9.8 exits at pool prompt.
w0lf0.
Hero Member
*****
Offline Offline

Activity: 924
Merit: 508



View Profile
August 21, 2017, 12:52:37 PM
 #197

Very bad for me, power consption is too important and that driver is bad for it, i remain with my old driver Smiley

           ▀██▄ ▄██▀
            ▐█████▌
           ▄███▀███▄
         ▄████▄  ▀███▄
       ▄███▀ ▀██▄  ▀███▄
     ▄███▀  ▄█████▄  ▀███▄
   ▄███▀  ▄███▀ ▀███▄  ▀███▄
  ███▀  ▄████▌   ▐████▄  ▀███
 ███   ██▀  ██▄ ▄██  ▀██   ███
███   ███  ███   ███  ███   ███
███   ███   ███████   ███   ███
 ███   ███▄▄       ▄▄███   ███
  ███▄   ▀▀█████████▀▀   ▄███
   ▀████▄▄           ▄▄████▀
      ▀▀███████████████▀▀
DeepOnion
.Anonymous and Untraceable.
ANN  Whitepaper  Facebook  Twitter  Telegram  Discord 





      ▄▄██████████▄▄
    ▄███▀▀      ▀▀█▀   ▄▄
   ███▀              ▄███
  ███              ▄███▀   ▄▄
 ███▌  ▄▄▄▄      ▄███▀   ▄███
▐███  ██████   ▄███▀   ▄███▀
███▌ ███  ███▄███▀   ▄███▀
███▌ ███   ████▀   ▄███▀
███▌  ███   █▀   ▄███▀  ███
▐███   ███     ▄███▀   ███
 ███▌   ███  ▄███▀     ███
  ███    ██████▀      ███
   ███▄             ▄███
    ▀███▄▄       ▄▄███▀
      ▀▀███████████▀▀
.
anders31
Newbie
*
Offline Offline

Activity: 53
Merit: 0


View Profile
August 21, 2017, 12:54:41 PM
 #198

installed win 10 now my hash increased from 27 eth + 800 decred to 29eth + 890 decred but the power went higher and yea dag size is fixed
mini miner
Newbie
*
Offline Offline

Activity: 62
Merit: 0


View Profile
August 21, 2017, 02:11:14 PM
 #199

Rx570 @  27,2 mh/s ETH and 707 mh/s DCR with dcri 26 and claymore 9.8 dual mining.



can you explain about any changes in  r7 370 with this driver
Chipychop
Member
**
Offline Offline

Activity: 91
Merit: 10


View Profile
August 21, 2017, 04:55:19 PM
 #200

I'd like to ask owners of rx 570 4gb. anyone has tested beta drivers on higher DAG epoch like #180?

I doubt wether mount 2 rx 570 rigs or one with gtx 1070

because rx 570 are 4gb model and maybe in future it will be too low to mine anything...

which would be your recommendation?

thanks in advance
Vann
Hero Member
*****
Offline Offline

Activity: 728
Merit: 589


View Profile
August 21, 2017, 05:00:48 PM
 #201

I'd like to ask owners of rx 570 4gb. anyone has tested beta drivers on higher DAG epoch like #180?

I doubt wether mount 2 rx 570 rigs or one with gtx 1070

because rx 570 are 4gb model and maybe in future it will be too low to mine anything...

which would be your recommendation?

thanks in advance

https://bitcointalk.org/index.php?topic=2092279.msg20905036#msg20905036

The Dag size is not an issue for 4GB cards. Even 3GB cards will be OK until November 2018 and the Dag size won't reach 4GB until something like 2020. ETH will move to POS long before that.
panosarp
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
August 21, 2017, 05:29:22 PM
 #202

The official AMD blockchain driver for windows 7 x64 does not work (miners crash).
The leaked driver from robinh00d works but nothing can undervolt my RX570's, only OverdriveNTool  works for a few seconds before reverting.

The solution that worked best is to use the leaked driver and the wattman from the official driver:

1.  Install the official amd driver with amd settings
2.  Without reboot install the leaked driver via device manager by going the "i have a disk" route (for all cards - one by one)
3.  If you have a modified bios, run atikmdag-patcher and reboot 
4.   Use wattman to apply your mem clock and volt settings
5. Open miner, everything will be ok except undervolt, now with miner running make a small change to wattman and reapply (for each card one by one)

The voltages appear to be sticking for as long as the miner is running , except for the main card that reverts occasionally.
 



everything is works now. except the power with eth+SC almost sucks 140W.



Using OverdriveNTool from here: https://forums.guru3d.com/threads/overdriventool-tool-for-amd-polaris-gpus.416116
you can disable all power states except P7 for gpu and P2 for memory, that way the undervolt will be retained since gpu will always be at the highest performance state
and never throttle down.
The cards will consume more power when idle that way but for a mining ring that is irrelevant. 
Mattthev
Sr. Member
****
Offline Offline

Activity: 854
Merit: 358


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 21, 2017, 05:40:54 PM
 #203

https://bitcointalk.org/index.php?topic=2092279.msg20905036#msg20905036

The Dag size is not an issue for 4GB cards. Even 3GB cards will be OK until November 2018 and the Dag size won't reach 4GB until something like 2020. ETH will move to POS long before that.
Only Dual mining is problem with 3GB.

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
jmigdlc99
Sr. Member
****
Offline Offline

Activity: 756
Merit: 282


View Profile WWW
August 21, 2017, 05:56:12 PM
 #204

Has anyone gotten the Afterburner 4.4.4 beta version to work with the blockchain driver? I find that wattman to be a pain when tweaking OC settings because crashes always reset all the settings for each and all GPUs. Any advise will be appreciated.

0xacBBa937A57ecE1298B5d350f40C0Eb16eC5fA4B
QuintLeo
Legendary
*
Offline Offline

Activity: 1484
Merit: 1026


View Profile
August 21, 2017, 07:46:40 PM
 #205

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

 It didn't change because the R9 280x didn't suffer from the issue that the driver was intended to fix.
 The 280x was never a "truely good" ETH card in the first place - that was the 290 and to a lesser degree the 290x.

 Tahiti is arguably the best performance/price ratio for FP64 anyone ever released, but ETH doesn't use floating point....


The 7970/280x was actually very good at ETH only at the beginning. With DaggerCoins at Epoch #0 or #1 or so it can get like 28MH/s. And a year ago you could of found them on Craigslist for $100 second hand. The R9 290 while it was a little faster was always expensive to buy because it had high demand for gamers and was hard to find for less than $200. So the 280x was a better choice if it wasn't for the DAG bug.

 R9 290 wasn't hard to find at under $200 a year ago - MUCH under, yes, mine were $179 from NewEgg when I bought them last spring (Sapphire reference design, I think they were factory refurb cards).
 It's going to be an academic point in a few months though since the R9 280x is a 3GB card (I don't think anyone made them with a different memory capacity, but I MIGHT have missed a model somewhere).

 I don't remember ever seeing a R9 280x for $100 or less on craigslist, but I do remember seeing some in the $120-$140 range so I wouldn't be shocked if they were less in other locations at times - especially in or near large cities with more competition and more supply of used parts for sale.


I'm no longer legendary just in my own mind!
Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
seyyidkaya
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
August 21, 2017, 08:59:46 PM
 #206

Hi,

I have faced issues after upgrading/updating to the blockchain driver. I am suspecting 1 of my gpus might be bricked.

I have 4x identical powercolor rx 580 8gbs, they were running around 64C+- degrees. After the blockchain driver one of the gpus started functioning unstable.

After trying many things I have realized that power draw of this card is lowering down to 80w sometimes 40w and back to 110w as it should be. so the graph is up and down all the way. Normally gpu only power draw for each card is 110w, as the others run and draw constantly.

So there is something wrong with this cards, heat is higher than the others, power draw is unstable and it causes watchdog gpu hang error.

What do you guys think might be the issue with this card?
Bankincoins
Newbie
*
Offline Offline

Activity: 40
Merit: 0


View Profile
August 21, 2017, 09:02:20 PM
 #207

I went back to the old drivers.  Without undervolt tools this has to be changed in Bios which is a pain and hard to edit on the fly.   It will be worth it when the DAG becomes a bigger issue, but not right now.

It's really surprising how many people think this is great though.  You should really undervolt...
seyyidkaya
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
August 21, 2017, 09:50:57 PM
 #208

I went back to the old drivers.  Without undervolt tools this has to be changed in Bios which is a pain and hard to edit on the fly.   It will be worth it when the DAG becomes a bigger issue, but not right now.

It's really surprising how many people think this is great though.  You should really undervolt...

I have undervolted my cards from bios as I have faced the issue like most people with latest driver. Reverting back to previous driver does not change anything. I still have 1 card functioning unstable. I am afraid it might be related to hardware issue
tigz
Sr. Member
****
Offline Offline

Activity: 728
Merit: 261


View Profile
August 21, 2017, 11:06:14 PM
 #209

windows 7 don't work on official drivers (black skreen), but work on robinh00d drivers. watttools don't work, new version msi AB is work. Heshrate good, more, than standart drivers on 4-5%. and in the future it's more. But without wattols is shit - energy consumption is very hight
adaseb
Legendary
*
Offline Offline

Activity: 2492
Merit: 1237



View Profile
August 21, 2017, 11:31:22 PM
 #210

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

 It didn't change because the R9 280x didn't suffer from the issue that the driver was intended to fix.
 The 280x was never a "truely good" ETH card in the first place - that was the 290 and to a lesser degree the 290x.

 Tahiti is arguably the best performance/price ratio for FP64 anyone ever released, but ETH doesn't use floating point....


The 7970/280x was actually very good at ETH only at the beginning. With DaggerCoins at Epoch #0 or #1 or so it can get like 28MH/s. And a year ago you could of found them on Craigslist for $100 second hand. The R9 290 while it was a little faster was always expensive to buy because it had high demand for gamers and was hard to find for less than $200. So the 280x was a better choice if it wasn't for the DAG bug.

 R9 290 wasn't hard to find at under $200 a year ago - MUCH under, yes, mine were $179 from NewEgg when I bought them last spring (Sapphire reference design, I think they were factory refurb cards).
 It's going to be an academic point in a few months though since the R9 280x is a 3GB card (I don't think anyone made them with a different memory capacity, but I MIGHT have missed a model somewhere).

 I don't remember ever seeing a R9 280x for $100 or less on craigslist, but I do remember seeing some in the $120-$140 range so I wouldn't be shocked if they were less in other locations at times - especially in or near large cities with more competition and more supply of used parts for sale.



Maybe in your area you had better luck but I also got them refurbished from NewEgg last year and it was the best deal out of anything I found on Craigslist. On Craigslist alone it was at least >$200 and they were rare and hard to come by. I think since they were flagship models they were made in smaller quantities than the Tahiti.

The Tahiti were flooded on Craigslist, probably due to Litecoin mining days as I found that almost 50% of the ones I bought off Craigslist were mined at some point in their life.