Royal Empire Coin [REC] - Looking For Mining Pools and Miners

[Vencas1]

For my Nividia I tried several miners.  CCminers worked well, I tried 4 or 5 different versions and just ran them through roughly a hundred shares or so bcs I didn't have the patience for longer.  The best was the klaus ccminer fork 8.13.  The card was run stock, no mods no overclocking.  I used steamoctanepool as the mining site.  Here's the top results:

ccminerx64 2.27 top speed- 595 Mh/s,  avg speed:  571 Mh/s
ccminerx64 2.2   tops         603 Mh/s         avg        574 Mh/s
ccminer/Klaus 8.13             850 Mh/s          avg       785 Mh/s

I'm being liberal with my use of the word average- I didn't sit down and crunch numbers - I just watched for a few minutes,

this is the bat file I used, swapping out ccminer.exe for ccminer-x64 when using the first two listed
_______________------------------_________________________________________________________________________
ccminer.exe -a skein -o stratum+tcp://steamoctanepool.com:4933 -u rRyAgeFcryZXubYDADVLZN76YPmLKXAFfX -p -c=rec

pause

_______________________________________________________________________________ __________________________

The klaus has now been running 20 minutes and the current hashrate is 785.5
all the MH/s reading were read from my daemon window not the site
Hope this helps!  I'm a relatively new miner with just a few months experience so if you have simple questions I'm glad to answer, f you have techie questions don't bother asking me- plug it in and hit play is about my level of expertise.
Cheers!

On which card you getting above hash rates ?

It's a Zotac1080ti AMP! 11gb.  Its a single GPU, not a rig.  It's ok on eth- 30-32MH/s but better in other algos. It gets
blake2s=6GH/s .., Decred 4Gh/s ,  Lyra2v2 58 MH/s, library credits low 400MH/s up to up to 500 with the CC spmod 6,  Quark 30-35MH/s, Equihash 500-600 H/s, Skunk 48-52MH/s, Neoscrypt 1.4 MH/s, Tribus 70-75MH/s,  X17 =18Mh/s
I wouldn't reccomend it for a rig, or if your electric is high bcs its a hog.  The 1070's can be tweaked to get similar eth and each of the same algos do pretty well and have the highest efficiency rating in the Nividia line if memory serves. The numbers above I collected trying out different miners- most all in the CCminer family but different versions/spmods.  The nicehash profit calculator is also pretty spot on if you want to see other rates.  I lucked out getting the Zotac, now that I'm looking at bench marks on the yiimp pools I find that this model tends to be near top in most algos and there is a pretty wide variance in hash rate depending on manufactorer. Long term the 1070's will make better profit - right now I get electric included in my rent costs so its not a factor for me.  Price wise the 1070's are falling around $400 but the 1080's haven't much budged.  If you're a hardcore gamer it is a great dual purpose gpu- it kills on some gaming benchmarks I checked out as well.  I think AMD's have it beat in some areas, they're strong on eth, but the nividias really have some range and a strong advantage in some algos.
If anyone wants a list of which miners do best for each algo (so far as I've discovered to date) I'm happy to provide that info as well- it also does a decent job dual mining and you can run an eth+ X (decred, sia etc..) using a dual purpose miner.
Cheers!

I see that some are maybe finding some of the numbers a tad incredulous, I'm happy to take some screen shots but I don't think I'm clear to post pics yet- if anyone wants to post for me I can e-mail them attachments to post although it may be more appropriate to do so  in a miners thread. 

[1713909420]

1713909420

[1713909420]

1713909420

[1713909420]

1713909420

[IntelligentIdiot]

Aside from downloading the wallet, I guess the next thing we non-miners could do is wait for the bounties. Any news when those bounties will happen?

[Jdope]

For my Nividia I tried several miners.  CCminers worked well, I tried 4 or 5 different versions and just ran them through roughly a hundred shares or so bcs I didn't have the patience for longer.  The best was the klaus ccminer fork 8.13.  The card was run stock, no mods no overclocking.  I used steamoctanepool as the mining site.  Here's the top results:

ccminerx64 2.27 top speed- 595 Mh/s,  avg speed:  571 Mh/s
ccminerx64 2.2   tops         603 Mh/s         avg        574 Mh/s
ccminer/Klaus 8.13             850 Mh/s          avg       785 Mh/s

I'm being liberal with my use of the word average- I didn't sit down and crunch numbers - I just watched for a few minutes,

this is the bat file I used, swapping out ccminer.exe for ccminer-x64 when using the first two listed
_______________------------------_________________________________________________________________________
ccminer.exe -a skein -o stratum+tcp://steamoctanepool.com:4933 -u rRyAgeFcryZXubYDADVLZN76YPmLKXAFfX -p -c=rec

pause

_______________________________________________________________________________ __________________________

The klaus has now been running 20 minutes and the current hashrate is 785.5
all the MH/s reading were read from my daemon window not the site
Hope this helps!  I'm a relatively new miner with just a few months experience so if you have simple questions I'm glad to answer, f you have techie questions don't bother asking me- plug it in and hit play is about my level of expertise.
Cheers!

On which card you getting above hash rates ?

It's a Zotac1080ti AMP! 11gb.  Its a single GPU, not a rig.  It's ok on eth- 30-32MH/s but better in other algos. It gets
blake2s=6GH/s .., Decred 4Gh/s ,  Lyra2v2 58 MH/s, library credits low 400MH/s up to up to 500 with the CC spmod 6,  Quark 30-35MH/s, Equihash 500-600 H/s, Skunk 48-52MH/s, Neoscrypt 1.4 MH/s, Tribus 70-75MH/s,  X17 =18Mh/s
I wouldn't reccomend it for a rig, or if your electric is high bcs its a hog.  The 1070's can be tweaked to get similar eth and each of the same algos do pretty well and have the highest efficiency rating in the Nividia line if memory serves. The numbers above I collected trying out different miners- most all in the CCminer family but different versions/spmods.  The nicehash profit calculator is also pretty spot on if you want to see other rates.  I lucked out getting the Zotac, now that I'm looking at bench marks on the yiimp pools I find that this model tends to be near top in most algos and there is a pretty wide variance in hash rate depending on manufactorer. Long term the 1070's will make better profit - right now I get electric included in my rent costs so its not a factor for me.  Price wise the 1070's are falling around $400 but the 1080's haven't much budged.  If you're a hardcore gamer it is a great dual purpose gpu- it kills on some gaming benchmarks I checked out as well.  I think AMD's have it beat in some areas, they're strong on eth, but the nividias really have some range and a strong advantage in some algos.
If anyone wants a list of which miners do best for each algo (so far as I've discovered to date) I'm happy to provide that info as well- it also does a decent job dual mining and you can run an eth+ X (decred, sia etc..) using a dual purpose miner.
Cheers!

I see that some are maybe finding some of the numbers a tad incredulous, I'm happy to take some screen shots but I don't think I'm clear to post pics yet- if anyone wants to post for me I can e-mail them attachments to post although it may be more appropriate to do so  in a miners thread. 

May i ask how many coins do you get with your 785 daily?

Also by the way, try EWBF's miner for equihash (750 easy with your card) and try alexis miner (i get around 620 with a 70% power limited 1080 on skein, up to 660 with no power limit)

[Hobbyist]

I'll be switching the RoyalEmpire MPOS pool to a UNOMP based pool.  I'm triggering MPOS to auto-payout for those users who have a balance. The MPOS site will remain available for a few days.


The new UNOMP based pool specs are below and should be active. The MPOS pools are still on HTTPS.

Website:: http://hobbyistpool.ddns.net
Stratum Host:   stratum+tcp://hobbyistpool.ddns.net
Port : 5341
Username:  YourRoyalEmpireCoinAddress
Password:   Anything
VarDiff Initial: 0.5
VarDiff Min:   0.001
Fee:  1%
Payout: Every 10 Min.

[SnowmanCoins]

We added the "RoyalEmpire Coin" to our pool.
No signup required.

,.-~*´¨¯¨`*·~-.¸-(pool.snowmancoins.com)-,.-~*´¨¯¨`*·~-.¸

Eg. for vardiff -o stratum+tcp://pool.snowmancoins.com:3008 -u YourWalletAddress 

[brubic]

There is no news at all. Dev, what's new, how are you? There is already a pool, but it is empty.
You need more advertising and communication in the thread, to attract attention.

Is there any news about the exchange?

[elmerian]

yeaaa,,,
when at exchange

[ice2090]

something mad happening on the steamoctanepool
12 hours before we were mining with 6-8 GH/s and we found like every 4th min one block.
now the hashrate raised up to 10 times higher and we still mine one block every 3rd min.
the Diff rised only 2 times not more.
if my calculation is right we must find block every 40-50 sec but this not happening.

[ice2090]

DEV
Last Active:   September 02, 2017, 03:57:07 AM

[virtual_miner]

something mad happening on the steamoctanepool
12 hours before we were mining with 6-8 GH/s and we found like every 4th min one block.
now the hashrate raised up to 10 times higher and we still mine one block every 3rd min.
the Diff rised only 2 times not more.
if my calculation is right we must find block every 40-50 sec but this not happening.

I am alone at pool.snowmancoins.com   but it is good.

[roboshark]

I wouldn't mine this coin. Dev is not that active.

[r00s]

Hi to all.
Did anybody tried to mine REC at https://umine.org pool?

[royalempire]

Hello everyone.  busy offline this past few days. busy looking merchants while waiting for novaexchange to add REC on thier exchange.  visit https://novaexchange.com/addcoin/ to see the REC status on novaexchange. thank you.

[umine.org]

Hello everyone!

RoyalEmpireCoin [REC] added to https://umine.org/

Low fee 0.5%, payouts every 2 hours.

Happy mining!

[maxuscz]

Damn.. why wallet hase only one connect and why to many orphan block in wallet?
it is some connetction problems

[spinnycat]

Wallet zero connections on this, anyone got any info re: what to change with the conf file so I get connections? Cheers !

[Hobbyist]

Wallet zero connections on this, anyone got any info re: what to change with the conf file so I get connections? Cheers !

try these ...
addnode=154.16.7.194:20028
addnode=76.95.178.229:20028

[spinnycat]

Mate worked a treat, cheers!

[spinnycat]

I'll be switching the RoyalEmpire MPOS pool to a UNOMP based pool.  I'm triggering MPOS to auto-payout for those users who have a balance. The MPOS site will remain available for a few days.


The new UNOMP based pool specs are below and should be active. The MPOS pools are still on HTTPS.

Website:: http://hobbyistpool.ddns.net
Stratum Host:   stratum+tcp://hobbyistpool.ddns.net
Port : 5341
Username:  YourRoyalEmpireCoinAddress
Password:   Anything
VarDiff Initial: 0.5
VarDiff Min:   0.001
Fee:  1%
Payout: Every 10 Min.

Hey Hobbyist, used this pool, solved a block as a solo miner with no one else mining last few hours and got only 22 REC. Just an fyi payout is alot better on SOC, just wanted to let you know in case you were still tweaking it.

[ice2090]

Cause before u solved the block someone else, mined on the pool and brought accepted shares, so u shared your block with him