|
September 05, 2017, 08:59:21 AM |
|
Hello,
I recently build my first mining rig, with x16 PCIe lanes and all, but only 5 out of 6 card are recognized my the bios and windows.
At first when i booted up the machine for the first time everything was ok....until i open the "Device Manager"and only 3/6 cards ware running fine, the other 3 had error 12 ( not enough recourses) After some digging i found out that i must change the setting in the bios to GEN1 and TLOD to 3.5gb, and so i did. The machine booted up normally but this time when i checked the "Device Manager" there was 5 cards running normally no error 12, nothing. But the 6-th card was not recognized, like there was no card installed to the MBO. I checked in the "System Browser" from the BIOS and in the 4-th pci slot it showed nothing like the card does not exist.
Cheklist: I thought that the card is dead, but when i boot up the machine, the fans on all cards are spinning normally. Checked the pcie lanes but they are fine too. Updated BIOS...same thing re-installed drivers..no luck
I'm running out of ideas.....
If anyone has any idea how to fix this. It would be very appreciated.
Here is the rig: MBO: Asrock z170 Gaming K6 CPU: Intel Pentium G4500 Ram: x1 4GB DDR4 Kingston 2400mhz PSU: x2 1200W RAIDMAX RX-1200AE-B GPU: x6 MSI 1060 6GB Armo
|