Baikal Giant X10

[daniel232388]

Utility depends on the difficulty your miner is currently set to, so the value is not consistent.

so the lower the diff is set, the higher the utility is? the figure in utility does now represent the performance of the unit itself? by the way, how is best to set or how to calculate what best difficulty to set on x10 and each coin we are mining? i want to try solomining....any idea what or how to best set the machine. is the diff setting matters most?

[1713530939]

1713530939

[1713530939]

1713530939

[cienki77]

no news on new algos? https://bitcointalk.org/index.php?topic=5079035.new#new have you seen this guys? another scam?

[flexmeister]

Greetings,

After about a month of trial and error every day have finally managed to get the X10/BK28 to mine MBC.

**These instructions are for baikal X10.

To get it working set up your config for a MBC wallet and password c=MBC and algorithm groestl on pool url "stratum+tcp://pool.totallyawesome.party:5333"

Currently profitability is around $3. The only catch is you have to use the included mining pool which has a 20% fee for all the hard work that went into this. So profits will be $2.40 compared to the $0.50 currently for each X10 miner.

Instructions:

Log into X10.
sudo wget http://pool.totallyawesome.party/x10.tar.gz
sudo tar -xzvf x10.tar.gz
sudo cp x10.bin /media/boot/
sudo killall sgminer
sudo cp sgminer /opt/scripta/bin/sgminer
sudo reboot

after reboot
log into X10.
sudo ./mbcx10 </dev/null &>/dev/null &

This will close any currently running sgminer instances and re-launch a new instance that will be able to mine MBC.

Open up the normal miner dashboard and it will show that it is hashing Groestl on the mentioned pool. Verify stats at pool.totallyawesome.party

Have fun!

codeg3n and tboy32c welcome to contact me for sharing of rewards as they have been invaluable to developing the soltuion

**please contact for instructions to return to stock firmware and miner if required.
no liability to be assumed for any damage caused by the modification of the stock firmware or software

[Shorty2520]

Hey,
first my miner fixed themselves, i don‘t how and why.

but..
another one bites the dust, the pi zero died. In this case it start with fan on 100% and no connection possible.
In case someone face these problems one day.



Anybody can recommend me an pool with auto switching algos and auto exchange money to what i want for example btc?

Thx and greetings folks

[arnold_mad]

would be also interessted to get some feedback on the MBC thing - value or scam ?

[flexmeister]

might be better if I just remove it, bit of effort to get it working on X10, but sure, use it if you want to make $2 a day instead of $0.68 per X10. can PM me if you need help

[shifty252]

looking to rent 2 TH/s of Quark rigs, paying 0.05 BTC/TH/day

[Nemorus]

Greetings,

After about a month of trial and error every day have finally managed to get the X10/BK28 to mine MBC.

**These instructions are for baikal X10.

To get it working set up your config for a MBC wallet and password c=MBC and algorithm groestl on pool url "stratum+tcp://pool.totallyawesome.party:5333"

Currently profitability is around $3. The only catch is you have to use the included mining pool which has a 20% fee for all the hard work that went into this. So profits will be $2.40 compared to the $0.50 currently for each X10 miner.

Instructions:

Log into X10.
sudo wget http://pool.totallyawesome.party/x10.tar.gz
sudo tar -xzvf x10.tar.gz
sudo cp x10.bin /media/boot/
sudo killall sgminer
sudo cp sgminer /opt/scripta/bin/sgminer
sudo reboot

after reboot
log into X10.
sudo ./mbcx10 </dev/null &>/dev/null &

This will close any currently running sgminer instances and re-launch a new instance that will be able to mine MBC.

Open up the normal miner dashboard and it will show that it is hashing Groestl on the mentioned pool. Verify stats at pool.totallyawesome.party

Have fun!

codeg3n and tboy32c welcome to contact me for sharing of rewards as they have been invaluable to developing the soltuion

**please contact for instructions to return to stock firmware and miner if required.
no liability to be assumed for any damage caused by the modification of the stock firmware or software

 
I did everything according to the instructions and now the miner writes me - 100% Reject on pool http://pool.totallyawesome.party algo Groestl

[bittawm]

selling g28s for 900usd inc shipping, someone overclock these bastards

[ManicMiner276]

selling g28s for 900usd inc shipping, someone overclock these bastards

You have the am 1499 on your site, not for 900 

[bittawm]

selling g28s for 900usd inc shipping, someone overclock these bastards

You have the am 1499 on your site, not for 900 

they are only on 900 through here through me. pm me if you want any

[gomme600]

Hi,
I just bought a miner cheap on ebay (hoping the prices will go back up), I have a few questions though. Is it possible to pause mining from the web interface and is it possible to only mine using 1 or 2 of the 3 mining cards? (I am running on solar power so wanted to limit power consumption until I set up some more pannels).
Thanks!

[VinZz972]

Hi,
Yes you can pause from interface.

It's not possible to use 1 or 2 of the 3 cards.
But you can use a low consuption algo such as Myriad-Groestl (150w) or Skein (120w).

[gomme600]

Thanks, could you please tell me where that option is? I couldn't find it anywhere!

Hi,
Yes you can pause from interface.

It's not possible to use 1 or 2 of the 3 cards.
But you can use a low consuption algo such as Myriad-Groestl (150w) or Skein (120w).

[gomme600]

I also can't figure out how to set up multi algo mining on zpool. Nicehash and miningpoolhub both worked but I wanted to try some other options as I'm getting bad profits from these two
So if someone could please explain how to do it for zpool.
Thanks.

[allnewbie]

Hi,
I just bought a miner cheap on ebay (hoping the prices will go back up), I have a few questions though. Is it possible to pause mining from the web interface and is it possible to only mine using 1 or 2 of the 3 mining cards? (I am running on solar power so wanted to limit power consumption until I set up some more pannels).
Thanks!

take boards you don't want to run off from miner.  you want only 1 boards working, then remove other two.
but must make sure the most right position board installed. (if you put miner with network slot top, PSU slot bottom when facing slot side )

[VinZz972]

Thanks, could you please tell me where that option is? I couldn't find it anywhere!

Hi,
Yes you can pause from interface.

It's not possible to use 1 or 2 of the 3 cards.
But you can use a low consuption algo such as Myriad-Groestl (150w) or Skein (120w).

You can add a false caracter in the pool address. And miner will stop !

Or why not to use a remote power plug that you can start/stop from your smartphone or an automation system (I will do that when I will install my solar panels)

[okyanus58]

https://poolovich.pro/?address=DCMopshQNmf4J5DY1rctC2T9AHuwLE68JF

cgminer/4.10.0   my-gr algo   
can someone explain this?

new device ?
new software to the old device apts ?

[GunsN]

Hello, what do you think about solo mining?

[VinZz972]

Hello, what do you think about solo mining?

+1

Is it worth on mining-dutch?

Hello,
I have just stop to mine on MD caused it is not enough earning.
I mine with Suprnova.