The Blocks Factory - Multicoin pool

[bolt1909]

pool is down  

I'm reporting an outage too.  my cgminer is failing to connect saying the url, port, or username/password is incorrect and that it will try again in 15 seconds...  

Our stratum server had some problems, database and webservers is ok.

Stratum will be up in short time

I see you still have problem with stratum...it happened last night and tonight too (FTC) i hope you will resolve that...

[1713887815]

1713887815

[1713887815]

1713887815

[marecek666]

there was something wrong with PXC pool too. I can see that my miner was connected to failover server (not tbf) this night for a while.

[Oldminer]

Hi

Have found your pool really stable mining with a few blades, however I recently added a Thunder X3 (28-30Mhs) and have had 3 issues:

1. The Zeus will start throwing up a lot of rejects after a short time of mining so have had to manually set it to user_diff32 to make it stable (reject rate is very low with this setting).

2. My combined total hash rate should be approx 52Mhs and it initially goes to 47mhs+ but then quickly drops to 25Mhs or so (wtf?)

3. My workers show 22mhs for the blades (which is fine) but it only shows about 6mhs for my Zeus (wtf?)

My share rate for the 2 workers is approx 2.18 S/s for the blades and the zeus is 2.86 S/s (which seems about right) so why the low hash rate on the Zeus? If I mine with my hardware on multipool.us I get a solid 50-52Mhs.

thanks

[lucazane]

Hi

Have found your pool really stable mining with a few blades, however I recently added a Thunder X3 (28-30Mhs) and have had 3 issues:

1. The Zeus will start throwing up a lot of rejects after a short time of mining so have had to manually set it to user_diff32 to make it stable (reject rate is very low with this setting).

2. My combined total hash rate should be approx 52Mhs and it initially goes to 47mhs+ but then quickly drops to 25Mhs or so (wtf?)

3. My workers show 22mhs for the blades (which is fine) but it only shows about 6mhs for my Zeus (wtf?)

My share rate for the 2 workers is approx 2.18 S/s for the blades and the zeus is 2.86 S/s (which seems about right) so why the low hash rate on the Zeus?

thanks

try put the difficulty higher, the sharerate seems high

edit : if your talking about WDC, it can be normal to see drop in hashrate. Because when the difficulty drops, WDC get raped by multipool and a new block is generated every 2-3 sec => the share computed by the miner are submited and we are already 1 or more block ahead in the chain, so these shares become invalid.

[Oldminer]

try put the difficulty higher, the sharerate seems high

I initially went with vardiff and it started rejecting as soon as the diff went up. Ive tried various difficulty settings and its only stable on diff=32. I set it just now to diff256 and straight off the bat my reject rate was 89% (it never stabilises). As regards the sharerate, it seems about right to me as the Zeus hash rate is 6mhs or more higher than the blades so I dont see this as an issue.

Its now showing a share rate for my blades of 0.06 S/s and 2.49 S/s, with a combined hash rate of 20mhs which is really weird..

[Oldminer]

edit : if your talking about WDC, it can be normal to see drop in hashrate. Because when the difficulty drops, WDC get raped by multipool and a new block is generated every 2-3 sec => the share computed by the miner are submited and we are already 1 or more block ahead in the chain, so these shares become invalid.

Yea I'm talking about WDC and I appreciate I will get invalid shares if the diff changes but that should only bump my reject rate up temporarily. It shouldnt mean a 89% reject rate infinitum with a diff setting of 256 running a Zeus X3. To me this a pool issue and has something to do with the way it handles ASIC's and how it interprets its Mh/s and share rate. The problem here is my current 'works' shows as 62.3% whereas it was showing 59% mining solely with my blades (a total of 22 mhs). The worker hash rate for my Zeus is showing as 6mhs (which explains why my worker rate only jumped 4%) though I can see my Zeus is mining locally @ 26mhs. Put simply, the pool isnt crediting my zeus for work performed. As I see it its a reporting issue & I will have to go back to multipool.us which sets my diff on 3m (& doesnt deviate) & gives me a less than 1% reject rate & reports my Zeus mining at 28-30mhs/s (which is correct) while this pool struggles with vardiff & reports it @ 22-25mhs & doesnt give me credit for shares mined.

[semajjames]

I accidentaly put 500 in the donation box instead of the auto payout box and now my balance is showing a negative figure can this please be put right

cheers

[lucazane]

I accidentaly put 500 in the donation box instead of the auto payout box and now my balance is showing a negative figure can this please be put right

cheers

Donations recredited

[semajjames]

I accidentaly put 500 in the donation box instead of the auto payout box and now my balance is showing a negative figure can this please be put right

cheers

Donations recredited

spot on thanks for response

[marecek666]

what is wrong with your pool? stratum server is offline, all your websites are offline for about 4 hours now!

[tmmapp]

My 63 GH/s are in. Mining DigiByte.  

[tmmapp]

  Pool down! 

[lucazane]

Stratum servers are down due to a network problem with our provider. I alerted their support, I hope they will fix this fast.

[lucazane]

Pool are UP

[gervazy]

Hi @lucazane
It is something wrong with my PXC coins.
I was make withdrawal today a few hours ago but the transaction isn't visible on the PXC blockchain.
My coins was disappear from my acount balance on your mine, but wasn't appear on my Cryptsy acount.
In the Transaction Log I see something like that:

3077747   2015-07-05 14:49:03   Debit_ATP   0(PcgMarQSGqwBrR3mhJ6H1NNzm6w3YAUxEZ)      -22571.56688367

no tx_id, no confirmations.

Could you repair that?

[lucazane]

Hi @lucazane
It is something wrong with my PXC coins.
I was make withdrawal today a few hours ago but the transaction isn't visible on the PXC blockchain.
My coins was disappear from my acount balance on your mine, but wasn't appear on my Cryptsy acount.
In the Transaction Log I see something like that:

3077747   2015-07-05 14:49:03   Debit_ATP   0(PcgMarQSGqwBrR3mhJ6H1NNzm6w3YAUxEZ)      -22571.56688367

no tx_id, no confirmations.

Could you repair that?

TX sent : ac96f9064fbd2a40029a3e53920133a6554dbed1256c0a1af4a670fc017e3127

[gervazy]

Hi @lucazane
It is something wrong with my PXC coins.
I was make withdrawal today a few hours ago but the transaction isn't visible on the PXC blockchain.
My coins was disappear from my acount balance on your mine, but wasn't appear on my Cryptsy acount.
In the Transaction Log I see something like that:

3077747   2015-07-05 14:49:03   Debit_ATP   0(PcgMarQSGqwBrR3mhJ6H1NNzm6w3YAUxEZ)      -22571.56688367

no tx_id, no confirmations.

Could you repair that?

TX sent : ac96f9064fbd2a40029a3e53920133a6554dbed1256c0a1af4a670fc017e3127

Thank you very much.

[bolt1909]

Nice calculation 

[Karwoo]

Hi @lucazane
It is something wrong with my DGB coins.
I was make withdrawal today a few hours ago but the transaction isn't visible on the DGB blockchain.
My coins was disappear from my acount balance on your mine, but wasn't appear on my Cryptsy acount.
In the Transaction Log I see something like that:

321896   2015-07-11 12:09:13   Debit_ATP   0(D9PVipExmREdLNzBJqnsEdYpUboHPZRqc5)      -2104037.5977257

no tx_id, no confirmations.

Could you repair that? Please??

Thanks in advance ,

Melanie

[Karwoo]

Ehh lucazane, are you there???

Melanie