[ANN] BHCoin - New "PHI1612" PoW/PoS Algorithm | The fastest GPU Mining Algo

[minerja]

is anyone else stuck here?? i can not get past this

*** ccminer 2.2.1 for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 8.0 64-bits

  Originally based on Christian Buchner and Christian H. project
  Include some algos from alexis78, djm34, sp, tsiv, klausT and anorganix

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-10-09 19:32:58] Starting on stratum+tcp://pool.friends-master.net:6667
[2017-10-09 19:32:58] NVML GPU monitoring enabled.
[2017-10-09 19:32:58] NVAPI GPU monitoring enabled.
[2017-10-09 19:32:58] 1 miner thread started, using 'phi' algorithm.
[2017-10-09 19:32:59] Stratum difficulty set to 0.01
[2017-10-09 19:32:59] phi block 1019, diff 84.671
[2017-10-09 19:33:00] GPU #0: Intensity set to 21, 2097152 cuda threads
[2017-10-09 19:33:00] GPU #0: aes_cpu_init invalid device symbol
Cuda error in func 'skein512_cpu_setBlock_80' at line 1095 : invalid device symbol.
Press any key to continue . . .

What card do you have?

[minerja]

the first post is very bad I find.
where is the most recent wallet? where the best miner and a small manual?
how to enter these addresses so the wallet can be online?
is there no information or do I have to read every page? I already have almost

What card do you have AMD or Nvidia?

[StyleForceOne]

@minerja
i have some nvida 1070 and some rx480/580 =)

[DeepTerrfici]

is anyone else stuck here?? i can not get past this

*** ccminer 2.2.1 for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 8.0 64-bits

  Originally based on Christian Buchner and Christian H. project
  Include some algos from alexis78, djm34, sp, tsiv, klausT and anorganix

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-10-09 19:32:58] Starting on stratum+tcp://pool.friends-master.net:6667
[2017-10-09 19:32:58] NVML GPU monitoring enabled.
[2017-10-09 19:32:58] NVAPI GPU monitoring enabled.
[2017-10-09 19:32:58] 1 miner thread started, using 'phi' algorithm.
[2017-10-09 19:32:59] Stratum difficulty set to 0.01
[2017-10-09 19:32:59] phi block 1019, diff 84.671
[2017-10-09 19:33:00] GPU #0: Intensity set to 21, 2097152 cuda threads
[2017-10-09 19:33:00] GPU #0: aes_cpu_init invalid device symbol
Cuda error in func 'skein512_cpu_setBlock_80' at line 1095 : invalid device symbol.
Press any key to continue . . .

What card do you have?

i've been trying to test it on my desktop that has a gtx660. my wallet is on the desktop. rig uses 1060s

[StyleForceOne]

ok this is a little wallet tut for windows.

download and install the wallet: https://github.com/216k155/lux/releases/tag/V4.0

go to C:\Users\WIN-USERNAME\AppData\Roaming\Lux

make an file "lux.conf"

with this text:

^{server=1
daemon=1
listen=1
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcport=6667
rpcallowip=127.0.0.1
addnode=45.63.25.110:6666
addnode=175.130.123.23:6666
addnode=153.136.110.21:6666
addnode=107.181.174.211:6666
addnode=24.225.176.183:6666
addnode=45.32.245.217:28886
addnode=197.88.49.72:28886
addnode=118.178.139.196:6666}

i downt know for what the rpcuser and the rpcpassword is this important?


can give me a mini instruction to mine? current miner and was heard in the bat file?
would be really great =)

[minerja]

the first post is very bad I find.
where is the most recent wallet? where the best miner and a small manual?
how to enter these addresses so the wallet can be online?
is there no information or do I have to read every page? I already have almost

ok u need
https://github.com/216k155/lux/releases/download/V4.0/lux-qt-wins.zip
https://github.com/216k155/lux/releases/download/test-v1/ccminer-phi.zip
http://pool.friends-master.net/
http://luxcoin.tech/

lux.conf
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=6665
port=6666
gen=1
server=1
daemon=1
listen=1
staking=1
addnode=45.32.245.217:6666
addnode=431.134.171.131:28886
addnode=495.72.210.111:28886
addnode=471.163.181.121:28886
addnode=4176.210.24.97:28886
addnode=431.134.171.131:28886

Have fun, just remember this will all change tomorrow

[minerja]

is anyone else stuck here?? i can not get past this

*** ccminer 2.2.1 for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 8.0 64-bits

  Originally based on Christian Buchner and Christian H. project
  Include some algos from alexis78, djm34, sp, tsiv, klausT and anorganix

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-10-09 19:32:58] Starting on stratum+tcp://pool.friends-master.net:6667
[2017-10-09 19:32:58] NVML GPU monitoring enabled.
[2017-10-09 19:32:58] NVAPI GPU monitoring enabled.
[2017-10-09 19:32:58] 1 miner thread started, using 'phi' algorithm.
[2017-10-09 19:32:59] Stratum difficulty set to 0.01
[2017-10-09 19:32:59] phi block 1019, diff 84.671
[2017-10-09 19:33:00] GPU #0: Intensity set to 21, 2097152 cuda threads
[2017-10-09 19:33:00] GPU #0: aes_cpu_init invalid device symbol
Cuda error in func 'skein512_cpu_setBlock_80' at line 1095 : invalid device symbol.
Press any key to continue . . .

What card do you have?

i've been trying to test it on my desktop that has a gtx660. my wallet is on the desktop. rig uses 1060s

My guess is that the miner needs a card with compute 5.2 or above, the 1060s are 6.1, but the 660gtx will probably be 3.0 so wont work. try it on your rig, i think it will be fine.
I have 750ti (5.0) and 1030GT (6.1). Only works on 1030GT
J

[DeepTerrfici]

is anyone else stuck here?? i can not get past this

*** ccminer 2.2.1 for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 8.0 64-bits

  Originally based on Christian Buchner and Christian H. project
  Include some algos from alexis78, djm34, sp, tsiv, klausT and anorganix

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-10-09 19:32:58] Starting on stratum+tcp://pool.friends-master.net:6667
[2017-10-09 19:32:58] NVML GPU monitoring enabled.
[2017-10-09 19:32:58] NVAPI GPU monitoring enabled.
[2017-10-09 19:32:58] 1 miner thread started, using 'phi' algorithm.
[2017-10-09 19:32:59] Stratum difficulty set to 0.01
[2017-10-09 19:32:59] phi block 1019, diff 84.671
[2017-10-09 19:33:00] GPU #0: Intensity set to 21, 2097152 cuda threads
[2017-10-09 19:33:00] GPU #0: aes_cpu_init invalid device symbol
Cuda error in func 'skein512_cpu_setBlock_80' at line 1095 : invalid device symbol.
Press any key to continue . . .

What card do you have?

i've been trying to test it on my desktop that has a gtx660. my wallet is on the desktop. rig uses 1060s

My guess is that the miner needs a card with compute 5.2 or above, the 1060s are 6.1, but the 660gtx will probably be 3.0 so wont work. try it on your rig, i think it will be fine.
I have 750ti (5.0) and 1030GT (6.1). Only works on 1030GT
J

thank you! will this work without the wallet on the rig?

[StyleForceOne]

the first post is very bad I find.
where is the most recent wallet? where the best miner and a small manual?
how to enter these addresses so the wallet can be online?
is there no information or do I have to read every page? I already have almost

ok u need
https://github.com/216k155/lux/releases/download/V4.0/lux-qt-wins.zip
https://github.com/216k155/lux/releases/download/test-v1/ccminer-phi.zip
http://pool.friends-master.net/
http://luxcoin.tech/

lux.conf
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=6665
port=6666
gen=1
server=1
daemon=1
listen=1
staking=1
addnode=45.32.245.217:6666
addnode=431.134.171.131:28886
addnode=495.72.210.111:28886
addnode=471.163.181.121:28886
addnode=4176.210.24.97:28886
addnode=431.134.171.131:28886

Have fun, just remember this will all change tomorrow

ok many dear thanks! =))
really great answer and so it worked the same way ..

you will know it but for others, I have done it with this bat file then =)
"
@echo off
TITLE PHI - solo
ccminer --cpu-priority=3 -a phi -o stratum+tcp://pool.friends-master.net:6667 -u LfXPBSXsLp8ks6A5NFzXJQUL7TeUioNe5S -p anything -i 18
pause
"

so you get directly into the pool .. you must my wollet address not even exchange;)

[}{uNdd]

my wallet still no sync after addnode ,
cant find any active node

[StyleForceOne]

my wallet still no sync after addnode ,
cant find any active node

ok this is a little wallet tut for windows.

download and install the wallet: https://github.com/216k155/lux/releases/tag/V4.0

go to C:\Users\WIN-USERNAME\AppData\Roaming\Lux

make an file "lux.conf"

with this text:

server=1
daemon=1
listen=1
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcport=6667
rpcallowip=127.0.0.1
addnode=45.63.25.110:6666
addnode=175.130.123.23:6666
addnode=153.136.110.21:6666
addnode=107.181.174.211:6666
addnode=24.225.176.183:6666
addnode=45.32.245.217:28886
addnode=197.88.49.72:28886
addnode=118.178.139.196:6666

i downt know for what the rpcuser and the rpcpassword is this important?











just 4 info...
i have a rig with 3 1070 8gb and 4 amd cards (480 and 580)
amd does not support!?... i think so!
nvidia 1070: 30 mh/s

my laptop has an nvidia 1050 and make 3128 kh/s

greetz

[}{uNdd]

my wallet still no sync after addnode ,
cant find any active node

ok this is a little wallet tut for windows.

download and install the wallet: https://github.com/216k155/lux/releases/tag/V4.0

go to C:\Users\WIN-USERNAME\AppData\Roaming\Lux

make an file "lux.conf"

with this text:

server=1
daemon=1
listen=1
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcport=6667
rpcallowip=127.0.0.1
addnode=45.63.25.110:6666
addnode=175.130.123.23:6666
addnode=153.136.110.21:6666
addnode=107.181.174.211:6666
addnode=24.225.176.183:6666
addnode=45.32.245.217:28886
addnode=197.88.49.72:28886
addnode=118.178.139.196:6666

i downt know for what the rpcuser and the rpcpassword is this important?











just 4 info...
i have a rig with 3 1070 8gb and 4 amd cards (480 and 580)
amd does not support!?... i think so!
nvidia 1070: 30 mh/s

my laptop has an nvidia 1050 and make 3128 kh/s

greetz

many thx !!
got active node but still no sync ,
maybe need to wait dev let it stable.

[finder]

pool mine??

[xoma11]

AMD miner?
Sgminer dont work =(

[StyleForceOne]

yes amd does not work i think so...

i have 3 x 1070 in my rig each 30mh/s but the pool shows only 30mh/s


what is now my mining power? is this a bug?
thanks

[Alexey Sukharev]

1080ti making about 25Mh whithout 20% gain with ccminer upgrade, so 1070 cant make 30Mh.
Yor 1070 making 10,9Mh each, so 30 in total.

[KhunChan]

1080ti making about 25Mh whithout 20% gain with ccminer upgrade, so 1070 cant make 30Mh.
Yor 1070 making 10,9Mh each, so 30 in total.

Ecть cкoмпилиpoвaнный oбнoвлённый ccмaйнep ? 

[KhunChan]

yes amd does not work i think so...

i have 3 x 1070 in my rig each 30mh/s but the pool shows only 30mh/s


what is now my mining power? is this a bug?
thanks

[2017-10-10 05:31:42] GPU #1: ASUS GTX 1070, 14.06 MH/s
[2017-10-10 05:31:42] GPU #1: 2002 MHz 124.78 kH/W 111W 52C FAN 55%
pl 95% cc+150 mc+400 (p0)
ccminer 216k155/lux

[sstercan]

please change thread name to luxcoin or create a new thread with title luxcoin. it's confusing. and for hard reset incident shame on you dev. if you are serios about your coin you must said it's testnet on ann and on github. on ann thread you said no exact date and time and on github you marked test before last wallets. but last windows wallet doesn't marked test. lots of people try to mine luxcoin. did you think any compensation plan for incident?

[StyleForceOne]

1080ti making about 25Mh whithout 20% gain with ccminer upgrade, so 1070 cant make 30Mh.
Yor 1070 making 10,9Mh each, so 30 in total.

ok understand many thanks everything clear =)