Ashot909 (OP)
Newbie
 Offline
Activity: 4
Merit: 0
|
 |
January 24, 2018, 12:28:19 AM |
|
Hi to all! This is my first topic and the first with help required. I've checked for the last 6 pages but did not found anything very common with my case. The december batch, the november sw worked completely ok for 2 weeks and few days ago the hash rate disappeared , I got 0.000 instead of the normal 14 Th. The strange thing that I got it at the same time for both asics... I'm pretty far away from them now and the only things that I can do, I do remotely. The issue: Both of them start , but from 6 boards 3 of them show the temp 15 C and no hashrate. I will provide u with everything required ti get this issue solved. Just let me know about what would u need. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000315] ps7-ttc #0 at df804000, irq=43
[ 0.000632] Console: colour dummy device 80x30
[ 0.000665] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040213] pid_max: default: 32768 minimum: 301
[ 0.040441] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040462] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042629] CPU: Testing write buffer coherency: ok
[ 0.042978] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043039] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043263] L310 cache controller enabled
[ 0.043283] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121041] CPU1: Booted secondary processor
[ 0.210233] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210366] Brought up 2 CPUs
[ 0.210386] SMP: Total of 2 processors activated.
[ 0.210394] CPU: All CPU(s) started in SVC mode.
[ 0.211090] devtmpfs: initialized
[ 0.213506] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214758] regulator-dummy: no parameters
[ 0.223292] NET: Registered protocol family 16
[ 0.225558] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.227880] cpuidle: using governor ladder
[ 0.227894] cpuidle: using governor menu
[ 0.235450] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.236999] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237013] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237135] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259014] bio: create slab <bio-0> at 0
[ 0.260667] vgaarb: loaded
[ 0.261688] SCSI subsystem initialized
[ 0.262587] usbcore: registered new interface driver usbfs
[ 0.262759] usbcore: registered new interface driver hub
[ 0.262983] usbcore: registered new device driver usb
[ 0.263517] media: Linux media interface: v0.10
[ 0.263675] Linux video capture interface: v2.00
[ 0.263926] pps_core: LinuxPPS API ver. 1 registered
[ 0.263938] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.264062] PTP clock support registered
[ 0.264439] EDAC MC: Ver: 3.0.0
[ 0.265479] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268497] DMA-API: preallocated 4096 debug entries
[ 0.268512] DMA-API: debugging enabled by kernel config
[ 0.268600] Switched to clocksource arm_global_timer
[ 0.289783] NET: Registered protocol family 2
[ 0.290473] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290530] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290615] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290666] TCP: reno registered
[ 0.290684] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290718] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290964] NET: Registered protocol family 1
[ 0.291332] RPC: Registered named UNIX socket transport module.
[ 0.291345] RPC: Registered udp transport module.
[ 0.291353] RPC: Registered tcp transport module.
[ 0.291362] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291376] PCI: CLS 0 bytes, default 64
[ 0.291832] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293929] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296090] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296286] msgmni has been set to 967
[ 0.297084] io scheduler noop registered
[ 0.297097] io scheduler deadline registered
[ 0.297136] io scheduler cfq registered (default)
[ 0.307357] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307378] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.433971] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.002264] console [ttyPS0] enabled
[ 1.006575] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.014276] [drm] Initialized drm 1.1.0 20060810
[ 1.031494] brd: module loaded
[ 1.040994] loop: module loaded
[ 1.050766] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.056513] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.064446] libphy: XEMACPS mii bus: probed
[ 1.068816] ------------- phy_id = 0x3625e62
[ 1.073562] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.082269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.088937] ehci-pci: EHCI PCI platform driver
[ 1.096165] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.103027] usbcore: registered new interface driver usb-storage
[ 1.110023] mousedev: PS/2 mouse device common for all mice
[ 1.116151] i2c /dev entries driver
[ 1.123131] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.128697] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.134593] Xilinx Zynq CpuIdle Driver started
[ 1.139470] sdhci: Secure Digital Host Controller Interface driver
[ 1.145561] sdhci: Copyright(c) Pierre Ossman
[ 1.149967] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.156705] mmc0: no vqmmc regulator found
[ 1.160748] mmc0: no vmmc regulator found
[ 1.198621] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207314] usbcore: registered new interface driver usbhid
[ 1.212833] usbhid: USB HID core driver
[ 1.217591] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.223896] nand: Micron MT29F2G08ABAEAWP
[ 1.227859] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.233805] Bad block table found at page 131008, version 0x01
[ 1.240030] Bad block table found at page 130944, version 0x01
[ 1.246078] 3 ofpart partitions found on MTD device pl353-nand
[ 1.251861] Creating 3 MTD partitions on "pl353-nand":
[ 1.256950] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265041] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272392] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281418] TCP: cubic registered
[ 1.284653] NET: Registered protocol family 17
[ 1.289374] Registering SWP/SWPB emulation handler
[ 1.295297] regulator-dummy: disabling
[ 1.299700] UBI: attaching mtd1 to ubi0
[ 1.827079] UBI: scanning is finished
[ 1.838794] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.845849] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.852645] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.859329] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.866159] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.872173] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.879283] UBI: max/mean erase counter: 14/7, WL threshold: 4096, image sequence number: 1283732989
[ 1.888380] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.897615] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.897621] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.901669] ALSA device list:
[ 1.901673] No soundcards found.
[ 1.918105] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.947211] UBIFS: recovery needed
[ 2.022487] UBIFS: recovery completed
[ 2.026151] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.032098] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.041211] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.051126] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.056122] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.067665] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.075098] devtmpfs: mounted
[ 2.078204] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.920099] random: dd urandom read with 0 bits of entropy available
[ 3.338620]
[ 3.338620] bcm54xx_config_init
[ 3.948646]
[ 3.948646] bcm54xx_config_init
[ 6.949485] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.955572] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 20.045091] In axi fpga driver!
[ 20.048190] request_mem_region OK!
[ 20.051553] AXI fpga dev virtual address is 0xdf9fc000
[ 20.056660] *base_vir_addr = 0x8c510
[ 20.072573] In fpga mem driver!
[ 20.075652] request_mem_region OK!
[ 20.079241] fpga mem virtual address is 0xe2000000
[ 20.878030]
[ 20.878030] bcm54xx_config_init
[ 21.507944]
[ 21.507944] bcm54xx_config_init
[ 24.508501] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 24.514520] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 467.824612] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8138e5c461fb8854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[29] has core num=15
Chain[6] ASIC[34] has core num=3
Chain[6] ASIC[54] has core num=2
Chain[6] ASIC[55] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 2195 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 2562 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8138e5c461fb8854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J7] ASIC[29] has core num=15
Chain[J7] ASIC[34] has core num=3
Chain[J7] ASIC[54] has core num=2
Chain[J7] ASIC[55] has core num=15
Chain[J8] has core num in PIC
miner total rate=14027GH/s fixed rate=14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=675
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650
max freq = 675
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:34 remote:36 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:27 remote:30 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:25 remote:29 offset:26
Chain[J8] chip[244] get middle temp offset=26 typeID=55
single board rate=4668 voltage limit=870 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 870
retryFlag=1 will set the voltage limited on chain[5], change voltage=870
now set pic voltage=125 on chain[5]
single board rate=4690 voltage limit=870 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 870
retryFlag=1 will set the voltage limited on chain[6], change voltage=870
now set pic voltage=125 on chain[6]
single board rate=4668 voltage limit=870 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 870
retryFlag=1 will set the voltage limited on chain[7], change voltage=870
now set pic voltage=125 on chain[7]
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
total valid nonce number:57361
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27204
last_nonce_num:118212
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26617
last_nonce_num:98537
chain[5]: some chip cores are not opened FAILED!
Test Patten on chain[5]: FAILED!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
do heat board 8xPatten for 2 times
do open core on Chain[5]...
Done open core on Chain[5]!
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
total valid nonce number:1924
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:866
last_nonce_num:6
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=824 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
total valid nonce number:56960
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26350
last_nonce_num:49303
chain[5]: some chip cores are not opened FAILED!
Test Patten on chain[5]: FAILED!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=1001 total_tv_end_sys=1002
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=71.1350 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=4.02600 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=12.5820 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=687.865 Asic[27]=0.00000 Asic[28]=81.9060 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=536.870 Asic[38]=0.00000
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=79.3390 Asic[02]=74.7250 Asic[03]=79.7420 Asic[04]=79.4730 Asic[05]=78.0140 Asic[06]=71.9230 Asic[07]=74.5070 Asic[08]=78.3830
Asic[09]=73.7350 Asic[10]=76.2690 Asic[11]=70.1450 Asic[12]=78.6010 Asic[13]=78.3320 Asic[14]=77.4770 Asic[15]=73.7020 Asic[16]=73.3830
Asic[17]=76.1850 Asic[18]=77.2420 Asic[19]=81.1170 Asic[20]=77.0400 Asic[21]=71.4540 Asic[22]=77.2250 Asic[23]=78.6010 Asic[24]=75.3290
Asic[25]=78.7180 Asic[26]=76.3530 Asic[27]=77.7620 Asic[28]=75.1110 Asic[29]=76.4870 Asic[30]=41.7920 Asic[31]=80.8150 Asic[32]=79.0030
Asic[33]=79.4230 Asic[34]=85.4290 Asic[35]=73.3830 Asic[36]=79.3730 Asic[37]=75.8830 Asic[38]=77.6280 Asic[39]=71.3360 Asic[40]=77.3260
Asic[41]=77.5100 Asic[42]=77.3420 Asic[43]=76.5040 Asic[44]=80.0770 Asic[45]=73.9870 Asic[46]=75.0440 Asic[47]=77.0740 Asic[48]=78.5170
Asic[49]=76.4870 Asic[50]=78.4160 Asic[51]=80.4290 Asic[52]=75.1280 Asic[53]=76.5200 Asic[54]=77.6440 Asic[55]=81.2180 Asic[56]=39.3590
Asic[57]=75.1110 Asic[58]=76.2520 Asic[59]=75.3120 Asic[60]=81.6880 Asic[61]=75.0270 Asic[62]=73.8360 Asic[63]=73.5680
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=73.7020 Asic[02]=78.9700 Asic[03]=75.6820 Asic[04]=71.7050 Asic[05]=69.6250 Asic[06]=72.9800 Asic[07]=74.8930 Asic[08]=79.3890
Asic[09]=71.3700 Asic[10]=65.5310 Asic[11]=74.9770 Asic[12]=72.6110 Asic[13]=77.4600 Asic[14]=75.0440 Asic[15]=68.8200 Asic[16]=75.7820
Asic[17]=69.3900 Asic[18]=69.5240 Asic[19]=74.2050 Asic[20]=75.1950 Asic[21]=69.8430 Asic[22]=72.1080 Asic[23]=74.1880 Asic[24]=72.1750
Asic[25]=71.4200 Asic[26]=75.7650 Asic[27]=73.3660 Asic[28]=74.0370 Asic[29]=73.0810 Asic[30]=71.1850 Asic[31]=72.3600 Asic[32]=69.8430
Asic[33]=71.1520 Asic[34]=75.9840 Asic[35]=74.0210 Asic[36]=76.5040 Asic[37]=76.6210 Asic[38]=75.6480 Asic[39]=71.7050 Asic[40]=71.1680
Asic[41]=69.8260 Asic[42]=74.3390 Asic[43]=73.2660 Asic[44]=75.5980 Asic[45]=71.5040 Asic[46]=68.3670 Asic[47]=75.9840 Asic[48]=75.7150
Asic[49]=74.3390 Asic[50]=76.0670 Asic[51]=68.7020 Asic[52]=69.7760 Asic[53]=73.8700 Asic[54]=71.3870 Asic[55]=71.7720 Asic[56]=68.0140
Asic[57]=81.2010 Asic[58]=72.1580 Asic[59]=73.4170 Asic[60]=76.1010 Asic[61]=73.4330 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[26]=687.865000
Asic[37]=536.870000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
read failed, old value: Chain[5] Chip[62] local Temp=0
read failed on Chain[5] Chip[62] middle Temp old value:15
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=46
Chain[6] Chip[62] middle Temp=58
Special fix Chain[6] Chip[62] middle Temp = 61
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=26
Chain[7] Chip[62] local Temp=42
Chain[7] Chip[62] middle Temp=52
Special fix Chain[7] Chip[62] middle Temp = 57
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=265
|
