[ANN] [Phantomx] coin -> online currency [PNX] | Pow/PoS X11 Masternode

[hpmathieu]

Hi Jaime,

No I didnt do much, awaiting your instructions.
Should I reinstall the complete masternode , then use wallet.dat backup to restart it?


I did try to restart masternode and got the following from debug.log
#----


ProcessBlock: ACCEPTED
socket recv error 104
P2P peers available. Skipped DNS seeding.
dnsseed thread exit
Successfully synced, asking for Masternode list and payment list
Successfully synced, asking for Masternode list and payment list
Successfully synced, asking for Masternode list and payment list
connect() to 188.52.148.59:31978 failed after select(): No route to host
connect() to 185.230.124.53:31978 failed after select(): Connection refused
socket recv error 104
receive version message: version 69110, blocks=172883, us=45.32.223.32:45400, the                                                                             m=0.0.0.0:31978, peer=39.106.201.170:31978
Added time data, samples 5, offset -4 (+0 minutes)
nTimeOffset = +0  (+0 minutes)
CActiveMasternode::ManageStatus() - Checking inbound connection to '45.32.223.32:                                                                             9340'
CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possibl                                                                             e list
CActiveMasternode::ManageStatus() - Could not find suitable coins!
CActiveMasternode::Dseep() - Error: masternode is not in a running status
CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running                                                                              statusconnected to self at 45.32.223.32:45366, disconnecting
socket recv error 104
socket recv error 104
socket recv error 104
#-------------------------------------------------------------------------
Now I am thinking: maybe this comes from the fact I sent the 20.000 PNXs in two TX:
one time 20 PNX for testing the address, then the remaining 11980 PNXs
That should give TWO Txids maybe this is the cause for the masternode refusing to start?

Thx
HP Mathieu

Hi Jaime,

Your following up is very much appreciated !
Block # is the same:  "blocks" : 172636,
172638   76eb9234e515f9b4c4748bc653d3b7ceda85f604615748dfccc2408ffe06f945   2   50.00001615   Sat, 27 Jan 2018 16:32:32 GMT

I got the wallet.dat backup:
#----------------------------------------------------------

 ls -al /root/PhantomX_bkp
total 104
drwxr-xr-x 2 root root  4096 Jan 27 16:35 .
drwx------ 7 root root  4096 Jan 27 16:35 ..
-rw------- 1 root root 98304 Jan 27 16:35 wallet.dat

#----------------------------------------------------------
Thanks
HP Mathieu

Is it working very well now?

[1713898140]

1713898140

[1713898140]

1713898140

[1713898140]

1713898140

[kidshell]

Hi Jaime,

No I didnt do much, awaiting your instructions.
Should I reinstall the complete masternode , then use wallet.dat backup to restart it?
Thx
HP Mathieu

Before, please, share your public wallet address!
If it's right, we can work on that.

[hpmathieu]

Jaime,

Wallet address that received collateral:

PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

Thx
HP Mathieu

Hi Jaime,

No I didnt do much, awaiting your instructions.
Should I reinstall the complete masternode , then use wallet.dat backup to restart it?
Thx
HP Mathieu

Before, please, share your public wallet address!
If it's right, we can work on that.

[kidshell]

Jaime,

Wallet address that received collateral:

PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

Thx
HP Mathieu

So, let's see if these steps will help you!
I'm considering your wallet is completely installed and working very well.
I checked your address and you still didn't transfer 20,000 to that address.


1 :: IF the wallet IS NOT SYNC, WAIT and IGNORE THESE STEPS from now

Let's use your wallet address - PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

2 :: creating a new address to the MN

Code:

pnx dumpprivkey PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

3 :: checking your public IP address

Code:

dig +short myip.opendns.com @resolver1.opendns.com

4 :: stop your wallet

Code:

pnx stop

5 :: changing the phantomx.conf

Code:

vi /wallets/phantomx/.wallet/phantomx.conf (press 'i' to edit and 'ESC + x' to save and exit)

Check based on this template:

Code:

rpcallowip=127.0.0.1
rpcuser=<user you want>
rpcpassword=<your password>
staking=0
server=1
listen=1
port=9340
masternode=1
masternodeaddr=<step-3: internet address>:9340
masternodeprivkey=<step-2: dumpprivkey>

addnode=54.218.118.59:9340
addnode=54.218.118.59:9341

6 :: start your wallet again

Code:

pnx -daemon -server

7 :: waiting 1 minute to sync the wallet again
Check if it's updated with the EXPLORER (explorer.phantomx.co)

Code:

pnx getinfo

8 :: transfer 20,000 PNX to your address {PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe}


9 :: wait 15 confirmations before to start your MN

Code:

pnx listtransactions

10 :: after that, start your MN

Code:

pnx masternode start

11 :: if showed a success message, you can check via list

Code:

pnx masternode list | grep <step-3: internet address>

I recommend you check via website https://masternodes.online/monitoring/
Hope to help you...

[CoinStalker]

Reserved for Turkish announcement translation and future topic updates. Also I'll modarate your locale channels in DD or Telegram etc, including howto sections etc. Thanks

[hpmathieu]

Jaime,

Thx youre being very thorough.

I gave you a wrong address, very sorry:
Wallet address on vps is
pnx getaccountaddress 0
PKu2B837eGHXARQNqTz4T4QjxHQBUSCkXC
#--------------------------------------------------
[
    {
        "account" : "0",
        "address" : "PKu2B837eGHXARQNqTz4T4QjxHQBUSCkXC",
        "category" : "receive",
        "amount" : 0.00200000,
        "confirmations" : 47,
        "blockhash" : "7898e38799d6fcf00e35652acb96ffcc18ac8716538e69cd33dc30e596f8db81",
        "blockindex" : 2,
        "blocktime" : 1516566896,
        "txid" : "c2177a148dc2d596f762a0f1ab4e71d085cbf07e8d17fdfc424a7f34ac31f239",
        "time" : 1516566833,
        "timereceived" : 1516566833
    },
    {
        "account" : "0",
        "address" : "PKu2B837eGHXARQNqTz4T4QjxHQBUSCkXC",
        "category" : "receive",
        "amount" : 19999.99800000,
        "confirmations" : 0,
        "txid" : "334151d24e79ad64fbc3f24cc120ccdf3dcd423ddd840b443f3c87ca4f8477af",
        "time" : 1516568783,
        "timereceived" : 1516568783
    }
]
#-------------------------------------------------------------------------

Thanks for the great help.
HP Mathieu

Jaime,

Wallet address that received collateral:

PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

Thx
HP Mathieu

So, let's see if these steps will help you!
I'm considering your wallet is completely installed and working very well.
I checked your address and you still didn't transfer 20,000 to that address.


1 :: IF the wallet IS NOT SYNC, WAIT and IGNORE THESE STEPS from now

Let's use your wallet address - PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

2 :: creating a new address to the MN

Code:

pnx dumpprivkey PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

3 :: checking your public IP address

Code:

dig +short myip.opendns.com @resolver1.opendns.com

4 :: stop your wallet

Code:

pnx stop

5 :: changing the phantomx.conf

Code:

vi /wallets/phantomx/.wallet/phantomx.conf (press 'i' to edit and 'ESC + x' to save and exit)

Check based on this template:

Code:

rpcallowip=127.0.0.1
rpcuser=<user you want>
rpcpassword=<your password>
staking=0
server=1
listen=1
port=9340
masternode=1
masternodeaddr=<step-3: internet address>:9340
masternodeprivkey=<step-2: dumpprivkey>

addnode=54.218.118.59:9340
addnode=54.218.118.59:9341

6 :: start your wallet again

Code:

pnx -daemon -server

7 :: waiting 1 minute to sync the wallet again
Check if it's updated with the EXPLORER (explorer.phantomx.co)

Code:

pnx getinfo

8 :: transfer 20,000 PNX to your address {PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe}


9 :: wait 15 confirmations before to start your MN

Code:

pnx listtransactions

10 :: after that, start your MN

Code:

pnx masternode start

11 :: if showed a success message, you can check via list

Code:

pnx masternode list | grep <step-3: internet address>

I recommend you check via website https://masternodes.online/monitoring/
Hope to help you...

[ppcoins]

hello, for the POS,

I found wired problem, I can see it show me I mined 50 PNX in wallet, but after I reopen the wallet, it show me only 25 PNX for the POS, is it normal?  thx

[callmecough]

hello, for the POS,

I found wired problem, I can see it show me I mined 50 PNX in wallet, but after I reopen the wallet, it show me only 25 PNX for the POS, is it normal?  thx

yes, it's a known issue for lots of wallets

[Enemyofgods]

never had an issue with Pure masternode, DigitalPrice mn shows sometimes i mined the block with the MN but the "?" still remains and i dont get the coins.

[kidshell]

never had an issue with Pure masternode, DigitalPrice mn shows sometimes i mined the block with the MN but the "?" still remains and i dont get the coins.

Check if your wallet is keeping syncing..
Help > Debug > Console and type "getinfo"

Compare the column BLOCKS with the last block in http://explorer.phantomx.co
Just to be sure, restart your wallet!

[andreas911]

I think this is not a good coin for mining bc they are premine too much (18%) and they don't have any plan to airdrop them to community. I have a question. Was my rewrard from Staking or MN?

Dev has burened 6.000.000 premined coins.

Airdrop now over, you're to late.

PoS reward... I don't know exactly, 25-50 pnx/day and I have around 12k pnx in my wallet.

[mannaart]

depends on your weight how much you get.
This is excellent pos coin

[HendrixJimi]

Phantomx coin is great! PNX was my first masternode, and it's working perfect! The setup was quite simple. Are you experienced? The coin is very powerful in staking too! (The coins earned through masternode I send to an other wallet for staking!) I want to buy more today for a second masternode on https://www.southxchange.com/Market/Book/PNX/BTC - it's quite underrated, but must have a future. Thanks and Hodl Phantomx!

[kidshell]

Phantomx coin is great! PNX was my first masternode, and it's working perfect! The setup was quite simple. Are you experienced? The coin is very powerful in staking too! (The coins earned through masternode I send to an other wallet for staking!) I want to buy more today for a second masternode on https://www.southxchange.com/Market/Book/PNX/BTC - it's quite underrated, but must have a future. Thanks and Hodl Phantomx!

Happy to see you trusting in PNX

[kayperwood11]

is it planned to enter larger exchanges?
the volume of 30k $ so far is not happy (

[hpmathieu]

Hi Jaime?

I did follow your instruction but still stuck with same message:
#-----------------------------------------------------

   {
        "account" : "0",
        "address" : "PKu2B837eGHXARQNqTz4T4QjxHQBUSCkXC",
        "category" : "receive",
        "amount" : 20000.00094557,
        "confirmations" : 17,
        "blockhash" : "659cdacb19ef2afd84126f7e4bbd87c39ce37976f2ff7852642b1880c1978cfc",
        "blockindex" : 3,
        "blocktime" : 1517262112,
        "txid" : "7710c1a7afdbaffa52516740ca85b501821ba82801c1de99ff3fd77cafebf668",
        "time" : 1517262095,
        "timereceived" : 1517262095
    }
]
root@vultr:~# pnx masternode start
not capable masternode: Unknown. Check debug.log for more information.
## -------------------------------------------------------------------------

What to do next
Thx
HP Mathieu

Jaime,

Thx youre being very thorough.

I gave you a wrong address, very sorry:
Wallet address on vps is
pnx getaccountaddress 0
PKu2B837eGHXARQNqTz4T4QjxHQBUSCkXC
#--------------------------------------------------
[
    {
        "account" : "0",
        "address" : "PKu2B837eGHXARQNqTz4T4QjxHQBUSCkXC",
        "category" : "receive",
        "amount" : 0.00200000,
        "confirmations" : 47,
        "blockhash" : "7898e38799d6fcf00e35652acb96ffcc18ac8716538e69cd33dc30e596f8db81",
        "blockindex" : 2,
        "blocktime" : 1516566896,
        "txid" : "c2177a148dc2d596f762a0f1ab4e71d085cbf07e8d17fdfc424a7f34ac31f239",
        "time" : 1516566833,
        "timereceived" : 1516566833
    },
    {
        "account" : "0",
        "address" : "PKu2B837eGHXARQNqTz4T4QjxHQBUSCkXC",
        "category" : "receive",
        "amount" : 19999.99800000,
        "confirmations" : 0,
        "txid" : "334151d24e79ad64fbc3f24cc120ccdf3dcd423ddd840b443f3c87ca4f8477af",
        "time" : 1516568783,
        "timereceived" : 1516568783
    }
]
#-------------------------------------------------------------------------

Thanks for the great help.
HP Mathieu

Jaime,

Wallet address that received collateral:

PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

Thx
HP Mathieu

So, let's see if these steps will help you!
I'm considering your wallet is completely installed and working very well.
I checked your address and you still didn't transfer 20,000 to that address.


1 :: IF the wallet IS NOT SYNC, WAIT and IGNORE THESE STEPS from now

Let's use your wallet address - PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

2 :: creating a new address to the MN

Code:

pnx dumpprivkey PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe

3 :: checking your public IP address

Code:

dig +short myip.opendns.com @resolver1.opendns.com

4 :: stop your wallet

Code:

pnx stop

5 :: changing the phantomx.conf

Code:

vi /wallets/phantomx/.wallet/phantomx.conf (press 'i' to edit and 'ESC + x' to save and exit)

Check based on this template:

Code:

rpcallowip=127.0.0.1
rpcuser=<user you want>
rpcpassword=<your password>
staking=0
server=1
listen=1
port=9340
masternode=1
masternodeaddr=<step-3: internet address>:9340
masternodeprivkey=<step-2: dumpprivkey>

addnode=54.218.118.59:9340
addnode=54.218.118.59:9341

6 :: start your wallet again

Code:

pnx -daemon -server

7 :: waiting 1 minute to sync the wallet again
Check if it's updated with the EXPLORER (explorer.phantomx.co)

Code:

pnx getinfo

8 :: transfer 20,000 PNX to your address {PfEKFcB9wm4La1E3eSfxBunPVk7wE38tUe}


9 :: wait 15 confirmations before to start your MN

Code:

pnx listtransactions

10 :: after that, start your MN

Code:

pnx masternode start

11 :: if showed a success message, you can check via list

Code:

pnx masternode list | grep <step-3: internet address>

I recommend you check via website https://masternodes.online/monitoring/
Hope to help you...

[Alex68]

I hope PNX devs are aware that Win wallet sync in not fixed yet and Win wallet hangs time to time with no response.
This must be fixed in order to go forward and up.

[buddy2018]

I have two MASTER NODES on two different windows wallet and both hangs time to time. I have reported this to DEV. Hoping they will fix this in next wallet release.

[Alex68]

I have two MASTER NODES on two different windows wallet and both hangs time to time. I have reported this to DEV. Hoping they will fix this in next wallet release.

I run MNs on Ubuntu 14.04 VPS and it's performance is stable. Win wallet however, hangs every time. In many cases finally it responds after several minutes, but it's not normal. I run several other wallets daily, so I know what is "normal" behavior. I am sure blockchain files are not corrupted - I have deleted, re-sync from zero and from downloaded chain files several times.
Issue is the same on different computers.

[coinbala]

Phantomx coin is great! PNX was my first masternode, and it's working perfect! The setup was quite simple. Are you experienced? The coin is very powerful in staking too! (The coins earned through masternode I send to an other wallet for staking!) I want to buy more today for a second masternode on https://www.southxchange.com/Market/Book/PNX/BTC - it's quite underrated, but must have a future. Thanks and Hodl Phantomx!

why do you send to another wallet for staking?