[Official ANN]FREELABIT|FBF|Up to 15% Interest|No ICO|POW|Cryptonight

[baliwae]

Most miners only support stratum so they can't directly connect to the daemon.  It's best to set up your own mining pool software such as node-cryptonote-pool, point it to your daemon and mine to it.

node-cryptonote-pool indeed did the trick without too much hassle:
http://shrani.si/f/1y/8H/4BHqvxZm/mining.png

Good bye high pool fees
To say thank you feel free to post your FBF address and I'll match you an airdrop ammount.

TFLBguAX6GNZRZmv4oUALqcKW11kN5xa2grxWGmZwaGQHdgirGDTJSL4BNkSXRmYb6E2hsasyskeJRH 4UCwT669JDCuau6rMUZC

[1715537789]

1715537789

[1715537789]

1715537789

[1715537789]

1715537789

[andro hac]

many users have problem with gui wallet, i even advised to realease new version

I can confirm slow synchronization sped over past few days too. Today however it synced fast once again.

strange,my wallet works fine ,no problems with synchronization and speed

[Budycakrog]

freelabit build a community on driven , it just good for idea, i think all people in the world must to see
overall for this project, about roadmap , whitepaper, and i see dev on this project is very active on give update news

[combat007]

freelabit build a community on driven , it just good for idea, i think all people in the world must to see
overall for this project, about roadmap , whitepaper, and i see dev on this project is very active on give update news

fully agree.

[pomartin]

Most miners only support stratum so they can't directly connect to the daemon.  It's best to set up your own mining pool software such as node-cryptonote-pool, point it to your daemon and mine to it.

node-cryptonote-pool indeed did the trick without too much hassle:


Good bye high pool fees
To say thank you feel free to post your FBF address and I'll match you an airdrop ammount.

TFLBguAX6GNZRZmv4oUALqcKW11kN5xa2grxWGmZwaGQHdgirGDTJSL4BNkSXRmYb6E2hsasyskeJRH 4UCwT669JDCuau6rMUZC

Nice try

Was FBF already requested on yobit?
https://yobit.net/en/addcoin/

I'd fill it up myself but I'm unsure about secp256k1 ver and devs email

[icodetected]

Blockchain Height: 45551 is passed

Neato, I registered months ago so I believe I'll be among at least the first 1000, we will see I guess how much interest was gathered! Anyone know the drop amount?

Are u sure you are on the right thread? 😆 because airdrop been running for a month not months and the amount is on the airdrop page (200fbf). Rewards will be distributed throughout the day.

and the list of winners can be viewed

Yes :
https://docs.google.com/spreadsheets/d/1bDm31ZcDCIqS_86FGSlxP25JtDdxC7PqvWD6oqGVxe0/edit?usp=sharing

Friends, what happened? I understand that I have the wallet address is correct, but I do not understand why I was not on the list? I installed the wallet 5 November 2017.

TFLBgq6JhUQCoiEUKLbCMkUZor7MwBLDbEzL8HughMkjLZ6tFhdtSWBRZ1eMxngZbcQoaX6fZL8fx3r zqhzi8PN6RHDqSAExXw5

Unfortunately, I haven't been in a wallet. Do you think it is because you have not yet processed the spreadsheet?

[Turkish88]

finally my wallet start sync. I am not changing any settings in my pc and router.
I think problem was in dev nodes, maybe after rebuilt it start working

[FreelaBit]

Blockchain Height: 45551 is passed

Neato, I registered months ago so I believe I'll be among at least the first 1000, we will see I guess how much interest was gathered! Anyone know the drop amount?

Are u sure you are on the right thread? 😆 because airdrop been running for a month not months and the amount is on the airdrop page (200fbf). Rewards will be distributed throughout the day.

and the list of winners can be viewed

Yes :
https://docs.google.com/spreadsheets/d/1bDm31ZcDCIqS_86FGSlxP25JtDdxC7PqvWD6oqGVxe0/edit?usp=sharing

Friends, what happened? I understand that I have the wallet address is correct, but I do not understand why I was not on the list? I installed the wallet 5 November 2017.

TFLBgq6JhUQCoiEUKLbCMkUZor7MwBLDbEzL8HughMkjLZ6tFhdtSWBRZ1eMxngZbcQoaX6fZL8fx3r zqhzi8PN6RHDqSAExXw5

Unfortunately, I haven't been in a wallet. Do you think it is because you have not yet processed the spreadsheet?

Check line 128 on 2nd batch sheet:
TFLBgq6JhUQCoiEUKLbCMkUZor7MwBLDbEzL8HughMkjLZ6tFhdtSWBRZ1eMxngZbcQoaX6fZL8fx3r zqhzi8PN6RHDqSAExXw5      
TX HASH:1ef317c5844c4200fcba1928b56be5702f1c171b0bc2d98c38f6166b128c4c16

[FreelaBit]

Most miners only support stratum so they can't directly connect to the daemon.  It's best to set up your own mining pool software such as node-cryptonote-pool, point it to your daemon and mine to it.

node-cryptonote-pool indeed did the trick without too much hassle:


Good bye high pool fees
To say thank you feel free to post your FBF address and I'll match you an airdrop ammount.

TFLBguAX6GNZRZmv4oUALqcKW11kN5xa2grxWGmZwaGQHdgirGDTJSL4BNkSXRmYb6E2hsasyskeJRH 4UCwT669JDCuau6rMUZC

Nice try

Was FBF already requested on yobit?
https://yobit.net/en/addcoin/

I'd fill it up myself but I'm unsure about secp256k1 ver and devs email

We´ve filled the form a few times but not even an automated receipt response until today, and we trying to avoid Yobit.
FreelaBit, as all Cryptonote coins, uses Curve25519 instead of Bitcoin core secp256k1 so the answer on that field in the form should be NO, email is contact@freelabit.xyz

Meanwhile, voting is still open on:

https://feedback.altcoinexchange.com/suggestions/2101/add-freelabit-fbf-coin

2.8K votes and counting...!!!

[FreelaBit]

finally my wallet start sync. I am not changing any settings in my pc and router.
I think problem was in dev nodes, maybe after rebuilt it start working

Great!

[fosograf]

finally my wallet start sync. I am not changing any settings in my pc and router.
I think problem was in dev nodes, maybe after rebuilt it start working

Great!

hooly great? 2 mesyaca net listinga, bomzhegolosovalku kalyaduut...

[FreelaBit]

finally my wallet start sync. I am not changing any settings in my pc and router.
I think problem was in dev nodes, maybe after rebuilt it start working

Great!

hooly great? 2 mesyaca net listinga, bomzhegolosovalku kalyaduut...

Yes it is Great! that this user fixed his issues with synching the wallet.
As per what you said about "2 months no listing, vagabond...." (Don´t get it why you didn´t posted in English, but..whatever)
Let´s repeat what have been discussed many times before, in this thread:

*FreelaBit FBF it´s not a ETH Token but a Cryptonote Coin, (Do your own research to find differences)
*FreelaBit FBF is not an ICO (Introductory Coin Offering), meaning we´re not asking you to put money in advance....
*FreelaBit FBF it´s a community driven project as a whole, from the community to the community.
*Perhaps FreelaBit doesn´t fill your Pump & Dump needs, then there are 1000+ other coins/tokens where you can apply your P&D urgencies.
*Two months for a Cryptocoin it´s just too little time, FreelaBit it´s in its infancy still, it is a great time for mining due to the low diff.
*We  are aware that listing on an exchange is needed, as we mentioned before, we are not desperate to get listed yet we know we´ll have to reach that point eventually in the very near future, and we haven´t stopped working on it.
*Being that said, we´re not going to literally dump ~10btc just to get listed.
*We don´t own FreelaBIt FBF, again, it´s a decentralized community project.

[pomartin]

FreelaBit can you please give me a valid json_rpc wallet daemon command to perform a transaction? I understand that "transfer" was changed to "sendTransaction" but as far as parameters are concerned I just cant figure them out :/

[Alterberg]

Is there any community channel created for FREELABIT? It would be nice to have a communication channel for information exchange

[pomartin]

Is there any community channel created for FREELABIT? It would be nice to have a communication channel for information exchange

There is slack
https://join.slack.com/t/freelabit/shared_invite/MjM2NDIyNzI1MTU4LTE1MDQzOTM2OTAtNDYwYzBhM2EzZQ

[pomartin]

FreelaBit can you please give me a valid json_rpc wallet daemon command to perform a transaction? I understand that "transfer" was changed to "sendTransaction" but as far as parameters are concerned I just cant figure them out :/

To answer myelf: use wallet binded to desired port, not wallet deamon.

New question:
Once wallet was opened with wallet daemon I cannot open it with wallet... how to fix this? Or, how to send funds with json_rpc directly from wallet daemon?

[FreelaBit]

FreelaBit can you please give me a valid json_rpc wallet daemon command to perform a transaction? I understand that "transfer" was changed to "sendTransaction" but as far as parameters are concerned I just cant figure them out :/

To answer myelf: use wallet binded to desired port, not wallet deamon.

New question:
Once wallet was opened with wallet daemon I cannot open it with wallet... how to fix this? Or, how to send funds with json_rpc directly from wallet daemon?

Can you share what are you trying to accomplish? Are you setting up a pool? If so, which cryptonote pool fork are you using? Usually you don´t need to transfer funds manually that´s why you open daemon and wallet with RPC commands to be binded. When you say wallet daemon are you referring to wallet or daemon?

[pomartin]

FreelaBit can you please give me a valid json_rpc wallet daemon command to perform a transaction? I understand that "transfer" was changed to "sendTransaction" but as far as parameters are concerned I just cant figure them out :/

To answer myelf: use wallet binded to desired port, not wallet deamon.

New question:
Once wallet was opened with wallet daemon I cannot open it with wallet... how to fix this? Or, how to send funds with json_rpc directly from wallet daemon?

Can you share what are you trying to accomplish? Are you setting up a pool? If so, which cryptonote pool fork are you using? Usually you don´t need to transfer funds manually that´s why you open daemon and wallet with RPC commands to be binded. When you say wallet daemon are you referring to wallet or daemon?

Thanks for reply.
I am trying to set up a pool.
At first I set it up to mine to my local wallet and it worked just fine.
Now I tried to set up pools own wallet so it would actually act as a pool- pay workers.
As you said, with wallet binded to RPC port this pool works fine: https://github.com/fancoder/cryptonote-universal-pool

In the meantime I mannaged to open a wallet created by "flbwallet" with "walletd".
this wallet has 40 blocks in it.
Now I can not open tis wallet with "flbwallet" (same password works with walletd) -> error:Error: failed to load wallet: can't load wallet file 'FBF_pool.wallet', check password
Failed to initialize wallet

However I can open it with "walletd". I can use command curl http://address:8070/json_rpc -d '{"method":"getbalance"}' to view its balance. The question is: How to send balance in this wallet using RPC to one that I can open with "flbwallet"?

[FreelaBit]

FreelaBit can you please give me a valid json_rpc wallet daemon command to perform a transaction? I understand that "transfer" was changed to "sendTransaction" but as far as parameters are concerned I just cant figure them out :/

To answer myelf: use wallet binded to desired port, not wallet deamon.

New question:
Once wallet was opened with wallet daemon I cannot open it with wallet... how to fix this? Or, how to send funds with json_rpc directly from wallet daemon?

Can you share what are you trying to accomplish? Are you setting up a pool? If so, which cryptonote pool fork are you using? Usually you don´t need to transfer funds manually that´s why you open daemon and wallet with RPC commands to be binded. When you say wallet daemon are you referring to wallet or daemon?

Thanks for reply.
I am trying to set up a pool.
At first I set it up to mine to my local wallet and it worked just fine.
Now I tried to set up pools own wallet so it would actually act as a pool- pay workers.
As you said, with wallet binded to RPC port this pool works fine: https://github.com/fancoder/cryptonote-universal-pool

In the meantime I mannaged to open a wallet created by "flbwallet" with "walletd".
this wallet has 40 blocks in it.
Now I can not open tis wallet with "flbwallet" (same password works with walletd) -> error:Error: failed to load wallet: can't load wallet file 'FBF_pool.wallet', check password
Failed to initialize wallet

However I can open it with "walletd". I can use command curl http://address:8070/json_rpc -d '{"method":"getbalance"}' to view its balance. The question is: How to send balance in this wallet using TPC to one that I can open with "flbwallet"?

walletd uses different type of wallet, it can't be opened in simplewallet(flbwallet). To transfer coins you have to send json rpc command because walletd is intended to be used in services.
Check here https://github.com/seredat/karbowanec/issues/5  (KRB github)
see seredat comment there : "Hm, try to open it in walletd version you used to create wallet container, and use abovementioned getViewKey() and getSpendKeys() methods to export your private keys, then you will be able to import them into simplewallet"

[fosograf]

finally my wallet start sync. I am not changing any settings in my pc and router.
I think problem was in dev nodes, maybe after rebuilt it start working

Great!

hooly great? 2 mesyaca net listinga, bomzhegolosovalku kalyaduut...

Yes it is Great! that this user fixed his issues with synching the wallet.
As per what you said about "2 months no listing, vagabond...." (Don´t get it why you didn´t posted in English, but..whatever)
Let´s repeat what have been discussed many times before, in this thread:

*FreelaBit FBF it´s not a ETH Token but a Cryptonote Coin, (Do your own research to find differences)
*FreelaBit FBF is not an ICO (Introductory Coin Offering), meaning we´re not asking you to put money in advance....
*FreelaBit FBF it´s a community driven project as a whole, from the community to the community.
*Perhaps FreelaBit doesn´t fill your Pump & Dump needs, then there are 1000+ other coins/tokens where you can apply your P&D urgencies.
*Two months for a Cryptocoin it´s just too little time, FreelaBit it´s in its infancy still, it is a great time for mining due to the low diff.
*We  are aware that listing on an exchange is needed, as we mentioned before, we are not desperate to get listed yet we know we´ll have to reach that point eventually in the very near future, and we haven´t stopped working on it.
*Being that said, we´re not going to literally dump ~10btc just to get listed.
*We don´t own FreelaBIt FBF, again, it´s a decentralized community project.

Dude, thx for u answer) But where did you see such cosmic digits in 10btc ?? Stocks - 0.08-0.12BTC, yobit 0.6btc, south, satoshi... Why u try fly to HiBTC or Bittrex or... Cryptopia without base transfertint pre-mine to BTC for this?..
To tighten with the listing is a very bad move for any project, because the miners depart, the hasht falls and the project withers .. Listing gives an influx of new blood)