[GUIDE][AMD][NVIDIA][CPU][ETN]How to Mine ⚡️Electroneum + Miners Downloads 💲⛏

[caius72]

Is anyone else getting confused about the calculated rewards? I'm using 11.7 KH/s to mine Electroneum on etn.uax.io, which based on the calculator should yield about 970 ETN in return. After 15 hours I got about 312, which means I will get at most half of the calculated return (50% yield). I have been mining many different currencies and always got a 90% or better yield with regards to calculated and actual rewards. Now the whole (WhatToMine) mining economics falls apart if instead of >90% one gets only 50% of the calculated reward. Does anyone else have this problem? I'm wondering if etn.uax.io is taking half of my rewards instead of 1%.

[1714001294]

1714001294

[1714001294]

1714001294

[1714001294]

1714001294

[caius72]

Just looked a the discord group for etn.uax.io and it looks like I'm not the only one with this problem. The admin is not responsive so I assume that it's a fraud. Is there any decent pool in Europe that has more than 1MH'/s already?

[Yoko333]

How you pepole can get 800/850 h/s  per RX580 card ??

I 've tried several sthigs.  My bios memory straps are already modded (32+ mh/s ETH)

Buth if I keep the same OC settings on ETN (GPU@1150/900 and MEM@2250/950) I hardly get 700 h/s

Using SGMINER with raw intesntity at 1000 - worksize at 8 and gpu threads at 1

I've tried several combinations with intensity arount 570 and worksize to 4... Worst results...


Is it needed to mod the bios again ?

Does the hashrate decrease as long as the difficulty increases ?

RX580 Owners, what is your current hashrate on ETN ??

thanks

I have a 580rx Sapphire elpida, I'm getting around 700h/s stock with memshift bios. With 1050core and 1950mem I get 750h/s.

Maybe with a good modded Bios I would get 800h/s

In the setting what got me the most from my rx 580 is this setting on XMR amd:
"gpu_thread_num" : 2,

"gpu_threads_conf" : [
   { "index" : 0, "intensity" : 896, "worksize" : 4, "affine_to_cpu" : false},
   { "index" : 0, "intensity" : 896, "worksize" : 4, "affine_to_cpu" : false}
   
],

I'm quiet surprised there isn't more tutorial out there that gives you the best setting for each graphic card, espeacially for card widely used like the 580.
I had to read the whole thread of mining monero to find that setting which wasn't marked in BOLD.

There isn't good tutorial for setting up the SGminer so it speaks for itself I guess. The thing should be straighforward yet the command line script doesn't even give you the error, I'm shocked.

[Mattthev]

Just looked a the discord group for etn.uax.io and it looks like I'm not the only one with this problem. The admin is not responsive so I assume that it's a fraud. Is there any decent pool in Europe that has more than 1MH'/s already?

Currently hashparty is probably best, few days ago it was electromine.fr. You can always use Suprnova.
I currently mine on hashparty, it's based in US, but so far no problem with submiting results due to high ping. Will see if they fixed disconnection problems I had few days ago.

How you pepole can get 800/850 h/s  per RX580 card ??

I 've tried several sthigs.  My bios memory straps are already modded (32+ mh/s ETH)

Buth if I keep the same OC settings on ETN (GPU@1150/900 and MEM@2250/950) I hardly get 700 h/s

Using SGMINER with raw intesntity at 1000 - worksize at 8 and gpu threads at 1

I've tried several combinations with intensity arount 570 and worksize to 4... Worst results...


Is it needed to mod the bios again ?

Does the hashrate decrease as long as the difficulty increases ?

RX580 Owners, what is your current hashrate on ETN ??

thanks

I have a 580rx Sapphire elpida, I'm getting around 700h/s stock with memshift bios. With 1050core and 1950mem I get 750h/s.

Maybe with a good modded Bios I would get 800h/s

In the setting what got me the most from my rx 580 is this setting on XMR amd:
"gpu_thread_num" : 2,

"gpu_threads_conf" : [
   { "index" : 0, "intensity" : 896, "worksize" : 4, "affine_to_cpu" : false},
   { "index" : 0, "intensity" : 896, "worksize" : 4, "affine_to_cpu" : false}
   
],

I'm quiet surprised there isn't more tutorial out there that gives you the best setting for each graphic card, espeacially for card widely used like the 580.
I had to read the whole thread of mining monero to find that setting which wasn't marked in BOLD.

There isn't good tutorial for setting up the SGminer so it speaks for itself I guess. The thing should be straighforward yet the command line script doesn't even give you the error, I'm shocked.

SGminer has highest hashrate if you know how to config it. Almost same is for XMR-STAK, but even with best config Sgminer will have better hashrate. I like XMR-STAK anyway Your config isn't best it's better than stock, but you need to play with intensity and worksize.
Also performance timings would give you better results than copy original timings from bios...

[Turkish88]

Hi Someone use hidden miner playerz
I am install to the pc he say me installed succesfull, but mining not starting after 10 minutes.
Process player start when pc start up and lost after few seconds from task manager.
If am run cpu-stak miner manually, he starting and working fine

[edop2005]

Has anyone mined on http://us-etn-stats.hashparty.io succesfully?
They made a payment to my wallet but 24h later my balance is still 0...

Is it a scam? I ve read somewhere that they froze the wallet payments and are working with hackerone. Is that true?

If so then who is selling on crpytopia. Is it the founders?
Who is mining on nicehash?

[RealSwissMiner]

Has anyone mined on http://us-etn-stats.hashparty.io succesfully?
They made a payment to my wallet but 24h later my balance is still 0...

Is it a scam? I ve read somewhere that they froze the wallet payments and are working with hackerone. Is that true?

If so then who is selling on crpytopia. Is it the founders?
Who is mining on nicehash?

I received my payments to my wallet from them. Anyone who mined the coins can also sell them on the exchange. Its not a simple click and send wallet and takes like 10 minites to set up and some time to sync, but after that there is no problem to transfer your ETN to the exchangw.

[sir4o]

Just looked a the discord group for etn.uax.io and it looks like I'm not the only one with this problem. The admin is not responsive so I assume that it's a fraud. Is there any decent pool in Europe that has more than 1MH'/s already?

I was mining there in the beginning but lots of orphaned blocks. Swtiched to this one and no issues so far:
http://pool.electroneum.space/#

[Mattthev]

Just looked a the discord group for etn.uax.io and it looks like I'm not the only one with this problem. The admin is not responsive so I assume that it's a fraud. Is there any decent pool in Europe that has more than 1MH'/s already?

I was mining there in the beginning but lots of orphaned blocks. Swtiched to this one and no issues so far:
http://pool.electroneum.space/#

Today I switched there too.

[Jackkyy]

Just looked a the discord group for etn.uax.io and it looks like I'm not the only one with this problem. The admin is not responsive so I assume that it's a fraud. Is there any decent pool in Europe that has more than 1MH'/s already?

I was mining there in the beginning but lots of orphaned blocks. Swtiched to this one and no issues so far:
http://pool.electroneum.space/#

how long you mine in this pool
its ok?
real hashrate?

[RealSwissMiner]

Just looked a the discord group for etn.uax.io and it looks like I'm not the only one with this problem. The admin is not responsive so I assume that it's a fraud. Is there any decent pool in Europe that has more than 1MH'/s already?

I was mining there in the beginning but lots of orphaned blocks. Swtiched to this one and no issues so far:
http://pool.electroneum.space/#

how long you mine in this pool
its ok?
real hashrate?

Im getting very consistent returns from this pool considering the network hashrate movement. Just keep an eye on the pool hashrate - once it dropped to 100 Kh which was not so great for consistent returns.

[Mattthev]

Just looked a the discord group for etn.uax.io and it looks like I'm not the only one with this problem. The admin is not responsive so I assume that it's a fraud. Is there any decent pool in Europe that has more than 1MH'/s already?

I was mining there in the beginning but lots of orphaned blocks. Swtiched to this one and no issues so far:
http://pool.electroneum.space/#

how long you mine in this pool
its ok?
real hashrate?

Where you have unreal hashrate? All these pools run same node, but I like more the original Cryptonote node like Monero uses, it has at least static diff. These ported nodes for ETN doesn't support it.
I mine there few hours, no problem so far. Electromine.fr is probably best pool for me, but there is low hashrate... Hashparty UK same problem and US version has good hashrate but I'm getting lot of disconnetion even for few hours... maybe some DDOS attacks.

[Faboo005]

Quick note for anybody using claymore who's hashing speed seems too low.

I'm on an RX480 8GB, was struggling to get over 350H/s, had tried a few miners and drivers.

I randomly tried to screw with the -h perimeter. If you don't put one it, it puts one in for you. I manually put in -h 800, and my hashes doubled to 620H/s. Then I tried -h 1024 and that's moved it to 650H/s. I will keep tweaking, but it's worth messing with if you're going slower than expected!

[gugs]

Updated list of the pools here https://steemit.com/crypto/@gugs/list-of-electroneum-etn-mining-pools 

[illanz]

What happens today ?

Coins mined has been more than halved... Tested on suprnova and pool.space....

??

[RealSwissMiner]

What happens today ?

Coins mined has been more than halved... Tested on suprnova and pool.space....

??

My returns are consistent not much changed since yesterday on space pool.

I suggest to check your hardware and see if you machine had 100% uptime the last 24 hours.

[sspri2017]

Hello,

Can anyone please help me.

I have a gridseed 5 chip and for love or money I cannot get it to mine electroneum currency.

The bat file reads.

bfgminer.exe --scrypt -o stratum+tcp://pool.electroneum.space:7777 -u etnkLHUbM4z4erS24LM2AEN9Hp2cugdWRKnitER7kmrtTGZtsVhCiJaiuriTcz2pDeZ6rbJXNRyCtBZ gGCu9TN2x3HzbKt1uo4 -p x -d gridseed -S gridseed:all --set-device  gridseed:clock=850

The error it says is GPU missing.

What am I doing wrong.?

Thank you in advance

[illanz]

My rigs are up and running.

Now zero payment from suprnova since 2 hours.

I have 30kh/s usually I make 1,6 coin per minute...

Maybe suprnova has some reporting issue ...

[Mattthev]

CAT OFFER - 5% DISCOUNT
Contact me or directly Sampey with my nickname (Mattthev) and you will get 5% discount on your copy.



C.A.T. is an "automatic-trader" written in Java Code (Desktop Application) using Exchanges API
You only need to choose markets, set the first orders and parameters (not mandatory) and then let C.A.T. algorithm trade for you.
C.A.T. works on Linux/Windows/Mac with Java 8

More info:
🌟【BOT】C.A.T. Cryptocurrency Automatic Trader 5.1 🌟

[linkin87]

i compare claymore and sgminer-sm, then i see hashrate on claymore is higher than sgminer.
i've decided use claymore!

UPDATE: i just edit some option sgminer and i see the hashrate is increased. WoW. sgminer-sm is best!