Hiveon. №1 OS for mining

[dadashali]

There is still some matters yet.
1. For the first time (first run), if i get a rig id and enter it the setup would be completed successfully but if i delete that rig id in the website and make another one and then use "firstrun -f" command to setup a fresh rig once again, it would not be successful while info on "rig.conf" file will be changed to new info that i entered from fresh setup and the rig will stay to works with old rig id that was deleted before!

2. While i made setup miner software and wallet via video tutorial to mine XMR via nanopool server with claymore dual (i've RX 470), i don't know why the miner start to mine only for Ethereum while i didn't define any eth address at all!! In the Hiveos XMR mining not possible with claymore? I must mention that i'll click on the "rocket" after choosing the miner and wallet but after restart mining it will mine ethereum again ... i'm very confused  

3. For failing on memory overclock there is an error like below:
Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

I see Hiveos does not show this error on it website or miner console (via ssh or shellinabox) and it will shown on the connected monitor to the rig only! please explain about this matter or fix it on the Hiveos error report.

Regards

[1714051134]

1714051134

[1714051134]

1714051134

[1714051134]

1714051134

[1714051134]

1714051134

[1714051134]

1714051134

[1714051134]

1714051134

[naeme18720]

Hi
Please add Miner xmr stak amd v2 in os 
Very thanks

[coinfused.so]

Hi
Please add Miner xmr stak amd v2 in os 
Very thanks

I second that! Please add the latest miners, or the ability for us to upload our own

[dimafern]

Hi
Please add Miner xmr stak amd v2 in os 
Very thanks

I second that! Please add the latest miners, or the ability for us to upload our own

Each miner requires some implementation, config, stats, parsing, etc. So there will be never ability to upload own miner.
There is xmr-stak-cpu

xmr-stak CPU+GPU was a bit raw and buggy until now, though there are plans to add it.

[techgeeks]

So are Vega cards not supported at all? Even w Claymore_Dual?

[dimafern]

So are Vega cards not supported at all? Even w Claymore_Dual?

There are fresh 17.50 drivers and there are some mentions of vega in it. Will test it if I find any vega at my disposal. Or even you can write me of you give me ssh to your rig with hive.

[techgeeks]

Here is the link-
http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-for-Linux-Release-Notes.aspx

I would not be able to get you in remotely, don't even ask it is a cluster 'f', but our internet is a cluster of t-Mobile modems, w 2 firewalls on either side.

[dimafern]

Here is the link-
http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-for-Linux-Release-Notes.aspx
I would not be able to get you in remotely, don't even ask it is a cluster 'f', but our internet is a cluster of t-Mobile modems, w 2 firewalls on either side.

Oh common, i know where the drivers dwell) I have some response from users already, maybe tomorrow we run some test. I'll write back.

[techgeeks]

You da man, Thanks

[minkuluk]

hi there.. how to setup the openvpn ? where do i get the client.conf, ca.crt, client.crt and client.key files ?

[clems]

hi there.. how to setup the openvpn ? where do i get the client.conf, ca.crt, client.crt and client.key files ?

I suppose you have to setup your personal openvpn server and then generate client.conf / ca.crt ....

[clems]

New Radeon Linux driver for Vega.

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-for-Linux-Release-Notes.aspx

Can you add it in HiveOS?

[dadashali]

There is still some matters yet.
1. For the first time (first run), if i get a rig id and enter it the setup would be completed successfully but if i delete that rig id in the website and make another one and then use "firstrun -f" command to setup a fresh rig once again, it would not be successful while info on "rig.conf" file will be changed to new info that i entered from fresh setup and the rig will stay to works with old rig id that was deleted before!

2. While i made setup miner software and wallet via video tutorial to mine XMR via nanopool server with claymore dual (i've RX 470), i don't know why the miner start to mine only for Ethereum while i didn't define any eth address at all!! In the Hiveos XMR mining not possible with claymore? I must mention that i'll click on the "rocket" after choosing the miner and wallet but after restart mining it will mine ethereum again ... i'm very confused  

3. For failing on memory overclock there is an error like below:
Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

I see Hiveos does not show this error on it website or miner console (via ssh or shellinabox) and it will shown on the connected monitor to the rig only! please explain about this matter or fix it on the Hiveos error report.

Regards

It would be great if you can resolve this matter for me. @dimafern

[PontusLSE]

So are Vega cards not supported at all? Even w Claymore_Dual?

There are fresh 17.50 drivers and there are some mentions of vega in it. Will test it if I find any vega at my disposal. Or even you can write me of you give me ssh to your rig with hive.

Let me know if you need to access to a rig with Vega cards in place. I will set one up specially for this purpose if this could enable Vega support in HiveOS.

[CryptoCranium]

Can this OS be used t mine on SuperNova Pools?

[dimafern]

Can this OS be used t mine on SuperNova Pools?

Sure. Like on any other. There are some wallet examples.

[Asgaroth]

Hi,

Any chance of upgrading the claymorex102 version to claymore cryptonote amd gpu miner v11.0?

On a side note, is anyone mining with sgminer on hiveos? I've tried a couple settings but i just cannot get the miner to actually start mining, I get 0 H/s with sgminer on hiveos.

[dimafern]

Any chance of upgrading the claymorex102 version to claymore cryptonote amd gpu miner v11.0?
On a side note, is anyone mining with sgminer on hiveos? I've tried a couple settings but i just cannot get the miner to actually start mining, I get 0 H/s with sgminer on hiveos.

claymorex11 will be available soon with next update.
about sgminer it depends on the algo, and threads settings are tweaky, i'm not a big expert in that. also try nicehash fork, sometimes it  helps.

[Hotmetal]

Busy downloading HiveOS now. Can you tell me what the subscription costs are or add it to the frontpage?

Thank you

[Kalyst69]

Busy downloading HiveOS now. Can you tell me what the subscription costs are or add it to the frontpage?

Thank you

on the website :


Price per rig   $3
Up to 3 rigs   TEST FOR FREE


Hell a lot of rigs   Contact for a special price Free rigs are for testing and "home mining". Starting from 4 rigs you PAY FOR ALL 4.
E.g. For 4 rigs the price is 4 * $3 = $12 per month, for 20 rigs it's 20 * $3 per month.
Please don't create clone accounts as they will be banned.