Hiveon. №1 OS for mining

[dimafern]

0.6-184@201218 🐧

What's new?

MINERS👷‍♂️
⛏ Bminer v16.3.7 (added support NVIDIA 30 series GPUs; fixed crash mining Ethereum on NVIDIA)

[1713576104]

1713576104

[1713576104]

1713576104

[1713576104]

1713576104

[1713576104]

1713576104

[HaloGenius]

Right now i use srbminer to mine xhv

Far from mediocre results as for me. Try TeamRedMiner

[socks435]

Can I run Hiveos to hdd with 250gb/7200rpm?

I only have 4gb usb flash drive but I after I extract the USB img its around 7gb that's why planning to install it on my old HDD.

[nbminer]

Can I run Hiveos to hdd with 250gb/7200rpm?

I only have 4gb usb flash drive but I after I extract the USB img its around 7gb that's why planning to install it on my old HDD.

That should work fine use HDD Raw Copy Tool to extract HiveOs image and make sure drive is selected as boot device in bios.

I

[darkdude]

I use HiVEOS, and use 4 x 5600 xt cards.  the only miner I can run that is stable is teamredminer.  I really would prefer PhoenixMiner 5.4 but each time I do, each of my 4 GPUs error out immediately and say this :

Allocating buffers failed with: clCreateBuffer (-4).

then the rig reboots.

If I run on teadredminer the rig is stable.  Any idea what could cause this to be unstable with PhoenixMiner but ok with teamredminer?

[socks435]

Do you guys know how to apply -straps on this OS?

I can't seems to find where to add this "-straps 1" hope someone could share idea if where I can add this.
I just want to disable the pill and test the -straps for  phoenixminer.

The other thing is why claymore doesn't work on nVidia GPU?
Tried to switch to PhoenixMiner to Claymore.

[Binary100100]

Do you guys know how to apply -straps on this OS?

I can't seems to find where to add this "-straps 1" hope someone could share idea if where I can add this.
I just want to disable the pill and test the -straps for  phoenixminer.

The other thing is why claymore doesn't work on nVidia GPU?
Tried to switch to PhoenixMiner to Claymore.

Did you try editing PhoenixMiner under the Tuning tab? Try under Extra config arguments.

[dimafern]

0.6-184@201218 🐧

What's new?

MINERS👷‍♂️
⛏ Bminer v16.3.7 (added support NVIDIA 30 series GPUs; fixed crash mining Ethereum on NVIDIA)

[dimafern]

0.6-184@201220 🐧

What's new?

MINERS👷‍♂️
⛏ PhoenixMiner v5.4c (validated support for Nvidia RTX 3090, 3080, 3070, and 3060Ti GPUs on current kernels and there are no speed increases from the previous miner release; added new kernels to allow mining on AMD Hawaii cards (R9 390, etc.) with the current and future DAG epochs; added support for DAG epochs up to 500)
⛏ Gminer v2.36 (support extra nonce length up to 6 bytes for Ethash/KAWPOW algorithms, now miner will works on f2pool, miningpoolhub and other pools; added display of fan speed, core clock, memory clock, DAG size, share difficulty for Ethash/KAWPOW algorithms; display power efficiency for cuckoo cycle algorithms in milliwatts; fixed bug with stale job logic on beam and cortex - it will increase hashrate on pool side; added option to enable/disable caching of DAG file, enabled by default, --cache_dag 0/1; added option to enable/disable share check on CPU for Ethash/KAWPOW algorithms, enabled by default, --share_check 0/1)
⛏ SRBMiner-Multi v0.6.0 (small performance increase on 'cryptonight_gpu', 'curvehash' algorithms; slow start (ramp up) of GPU's on miner start is now on by default; added parameter '--disable-workers-ramp-up'; removed 'tellor', 'rainforestv2' algorithms)
⛏ CPUminer-Opt by rplant v5.0.5 (fixing a critical bug with "job not found" shares. on sugarchain, the update is mandatory, on other coins it is desirable)
⛏ XLArig v5.2.0 (as fork xmrig-new; upstream to XMRig v6.3.4)

[dimafern]

0.6-184@201221 🐧

What's new?

MINERS👷‍♂️
⛏ T-Rex 0.19.5 (octopus up to 20% performance improvements on most 20xx and 30xx series GPUs with low PL; added solo mining support for octopus)
⛏ NBMiner v35.1 (ethash: more stable under high OC for Nvidia GPUs; octopus: improved hashrate 1-3% for 16, 20, 30 Nvidia GPUs)
⛏ XMRig v6.7.0 (up to 20-30% faster RandomX dataset initialization with AVX2 on some CPUs; added VM detection; code cleanup and refactoring; fixed some errors found by static analysis)

[dimafern]

0.6-184@201222 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.37 (fixed bug with '--proto stratum' for ethash mining appeared in v2.36, this bug may lead to share rejects; fixed mining on kawpow algorithm with intensity; lowered fee on ethash to 0.65%, kawpow algorithm to 1%)
⛏ NBMiner v35.2 (added DAG verification on ethash after creation, if miner showed log in red font: 'Verification failed, invalid 2.0%', please consider lower GPU overclock)
⛏ CPUminer-Opt by rplant v5.0.7 (added dynamic US and RU2 stratums for sugarchain and microbitcoin; DoH switched to google, now miner starts faster; bug fixes)
⛏ CPUminer-Opt-JayDDee v3.15.5 (fixed stratum jobs lost if 2 jobs received in less than one second)

[socks435]

Did you try editing PhoenixMiner under the Tuning tab? Try under Extra config arguments.

Already done it seems it works like pill it still can't improve to 50mh/s for gtx1080ti.

Do you have recommendation to improve hashrate or even just power efficiency?
 Other recommendation from hive dashboard doest eork either.

[dimafern]

0.6-185@201223 🐧

What's new?

SYSTEM🖥
⚙️ Improved gpu-stats (improved reading metrics from AMD GPUs)
⚙️ Improved API servers fallback (removed hardcoded API hosts; added repository URL to net-test)
⚙️ Improved amd-oc (added an alternative method that may help for some Polaris GPUs when core voltage stuck at 1000mV)
⚙️ Improved nvidia-info tool (added filtering by GPU index and bus id number, so you can call it like nvidia-info 4  for GPU4 or nvidia-info 05:00 for GPU with bus ID 05:00)
🐞 Fixed Nvidia GPUs VBIOS flashing (improved Nvidia driver unloading; fixed communication issues between agent and latest nvflash)
🐞 Fixed empty hashrate on too small values (e.g. on cuckaroo32 algorithm)
🐞 Fixed autofan (always set PWM mode before FAN speed which could fix for AMD R9 without FAN set in OC)
⚙️ Other small fixes

MINERS👷‍♂️
⛏ TeamRedMiner v0.7.22 (rewritten ethash kernel for Navi, now should now be more stable and use less power; slightly reworked init procedure; added Claymore compatible API, see the '--cm_api_listen')

[Khazore]

Hello, and good morning all;
 
I am curious if anyone else has experienced this issue that I am currently having.   I've benched marked my card with Haven and a few others and it seems to be working as it should.  But once I put in line on my mining rig it drops down to 92 Watts and will only do like 11.7 mhs on eth for example under Linux. And I am un-able to push it higher from what I can see.    Under windows I am able to raise the power to 117%  under master and get closer to 30 Mhs.   I just for the life of me can't figure it out, has anyone else experienced this?  I would love to be able to use the full potential  of my card.

Also under HIVEOS is there a command or something I can use to force the card to operate at a higher Wattage rather then reduce it's power consumption?

Also running on Asus B250 Mining Board.  Pretty sure the bios is 1206.
 
Thanks for any responses.

[Khazore]

Hello, and good morning all;
 
I am curious if anyone else has experienced this issue that I am currently having.   I've benched marked my card with Haven and a few others and it seems to be working as it should.  But once I put in line on my mining rig it drops down to 92 Watts and will only do like 11.7 mhs on eth for example under Linux. And I am un-able to push it higher from what I can see.    Under windows I am able to raise the power to 117%  under master and get closer to 30 Mhs.   I just for the life of me can't figure it out, has anyone else experienced this?  I would love to be able to use the full potential  of my card.

Also under HIVEOS is there a command or something I can use to force the card to operate at a higher Wattage rather then reduce it's power consumption?

Also running on Asus B250 Mining Board.  Pretty sure the bios is 1206.
 
Thanks for any responses.

Under Hive OS is there a way to force the card to use more power, like you can in Windows using MSI Afterburner?

[dimafern]

0.6-186@201223-2 🐧

What's new?

SYSTEM 🖥
⚠️ Fixed autofan issue introduced into v0.6-185 (setting fan speed on AMD was broken)

[dimafern]

0.6-187@201224 🐧

What's new?

SYSTEM 🖥
⚠️ Fixed amd-oc issue introduced into v0.6-185 (overclocking for some AMD GPUs worked incorrectly and mostly affected to Polaris RX 400-series)
⚙️ Fixed gpu-fans-find (minor fix)

MINERS👷‍♂️
⛏ Bminer v16.4.0 (added support mining ETH on AMD 4G cards via the -ethash-allocation parameter)

[batsonxl]

good people please tell me how you manage get high speeds on this hiveos? im getting 19mhs with rx570 8g. oc set to 1150 core 2050 memory.

[socks435]

good people please tell me how you manage get high speeds on this hiveos? im getting 19mhs with rx570 8g. oc set to 1150 core 2050 memory.

I think you will need  to flash the bios of RX570 that has custom strips before you can able to mine with around 30mh/s on etherium mining.

[batsonxl]

good people please tell me how you manage get high speeds on this hiveos? im getting 19mhs with rx570 8g. oc set to 1150 core 2050 memory.

I think you will need  to flash the bios of RX570 that has custom strips before you can able to mine with around 30mh/s on etherium mining.

thanks for reply. Is there another way to get 30mhs like used to do in claymore strap thing? no modding the bios. if i flash my cards on hiveos will it remain permanent?