jstefanop (OP)
Legendary
Online
Activity: 2156
Merit: 1400
|
|
December 22, 2017, 11:15:41 PM |
|
Am I getting errors? If so why? I've not done anything to the stick. No mods or anything. . Does it look alright to you guys? Yes. Try running just one at a time and see if it still does it. I am only running 1 stick Looks like your USB connection is bad, it disconnected then reconnected, thats why you see two there.
|
|
|
|
thestockfadi
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 22, 2017, 11:24:22 PM |
|
Yes. Try running just one at a time and see if it still does it. I am only running 1 stick Looks like your USB connection is bad, it disconnected then reconnected, thats why you see two there. Weather I have it plugged into my USB port on the laptop or if I have it plugged into the (walmart) hub I am still seeing the same thing. I see 2 "positions" doing something instead of 1
|
|
|
|
lennyNO
Newbie
Offline
Activity: 76
Merit: 0
|
|
December 22, 2017, 11:31:43 PM |
|
What again is the command to check how many of the 64 cores are alive??
I have now 11 MLD2s (all on the same industry hub, connected to win10 machine) but one is hashing at about 1/2 the speed of the others. I was running at full throthle for a day or so (clock at 954Mhz) but felt that with 11 units and additional external fans it was still getting too hot to my liking so have gone back to 876Mhz. Reduce the core voltage again. I had 6 units, received 5 more today, not sure if the one that's hashing below spec is one of the new ones or one of the earlier ones suddenly gone bad. Probably a new one because I did not have this on any of the original 6 units until I started to add the new 5 ones.
|
|
|
|
thestockfadi
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 23, 2017, 06:20:59 AM |
|
I don't know what is going on .. It was working fine. . I step away for a couple of hours . . I come back and I am getting this message. . https://image.ibb.co/eNtMS6/WTF.png
|
|
|
|
Eyedol-X
|
|
December 23, 2017, 06:27:01 AM |
|
I don't know what is going on .. It was working fine. . I step away for a couple of hours . . I come back and I am getting this message. . I suspect Windows defender deleted the miner executable, I suggest you set an exclusion and restore the file.
|
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
December 23, 2017, 07:01:23 AM |
|
Ohh wow .. . how do I do that? This is frustrating. . . dont run the bat as admin
|
|
|
|
thestockfadi
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 23, 2017, 07:21:12 AM Last edit: December 23, 2017, 09:29:06 AM by thestockfadi |
|
I deleted the drivers, I re-installed. . Ran, but now getting this error .. The miner hashes for about 5-9 times then I get a prompt which say's MLD1 Asic has stopped hashing, attempting to restart MLD2 Unrecognized response. .Then it will hash for another 6-9 passes, and give me the same prompt. . https://image.ibb.co/ifixjm/WTF3.png
|
|
|
|
markcarline2
Newbie
Offline
Activity: 42
Merit: 0
|
|
December 23, 2017, 07:40:47 AM |
|
Quick question for anyone here with a Raspberry PI 3 setup....
If I was to use a raspberry pi 3 standalone/headless (ie with no usb hub, keyboard or mouse attached) powered with the official pi power supply (2.5A) can anyone confirm if this will work and what speed they are able to achieve? (With stock voltage settings) ?
Thanks!
|
|
|
|
Astrali
Full Member
Offline
Activity: 281
Merit: 130
Crypto Addicted
|
|
December 23, 2017, 09:29:51 AM |
|
Quick question for anyone here with a Raspberry PI 3 setup....
If I was to use a raspberry pi 3 standalone/headless (ie with no usb hub, keyboard or mouse attached) powered with the official pi power supply (2.5A) can anyone confirm if this will work and what speed they are able to achieve? (With stock voltage settings) ?
Thanks!
you cant directly plug your moonlander 2 to your PI. if you use a powered hub it doesnt matter which power supply you use for your PI - it should just be enough to power the PI They can achieve the speed they get on every other device .. like 5.5mh/s max i run mine on 4.3 mh/s Greetings - Astrali
|
|
|
|
Fenboy
Newbie
Offline
Activity: 84
Merit: 0
|
|
December 23, 2017, 09:32:46 AM |
|
i ordered an overall of 4 miners - 3 from Bitshopper.de and 1 from Eyeboot.com Could any of you give me an idea how i could run 2 miners in 1 process and 2 miners in single mode on same raspberry? like this: bfgbimer_double.sh (miner 1 +2) bfgminer_single1.sh (miner 3) bfgminer_single2.sh (miner 4) cause i dont want all to mine on same pool with same username. (miners not arrived yet - but most probably first 3 will arrive over the weekend). Thanks Is this doable in Windows? I have 3x Moonlanders and would like to run them separately, it’s easier to rent out in smaller blocks.
|
|
|
|
jstefanop (OP)
Legendary
Online
Activity: 2156
Merit: 1400
|
|
December 23, 2017, 09:53:56 AM |
|
i ordered an overall of 4 miners - 3 from Bitshopper.de and 1 from Eyeboot.com Could any of you give me an idea how i could run 2 miners in 1 process and 2 miners in single mode on same raspberry? like this: bfgbimer_double.sh (miner 1 +2) bfgminer_single1.sh (miner 3) bfgminer_single2.sh (miner 4) cause i dont want all to mine on same pool with same username. (miners not arrived yet - but most probably first 3 will arrive over the weekend). Thanks Is this doable in Windows? I have 3x Moonlanders and would like to run them separately, it’s easier to rent out in smaller blocks. Yes, just change -S all to -S /dev/USBx where x is the USB number for a single moonlander. If you want two in one instance do something like -S /dev/USB0 -S /dev/USB1 etc... For windows use the \\.\COMx format
|
|
|
|
Christmaskkid
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 23, 2017, 10:29:01 AM |
|
please whatever you do, on the next version of moonlanders, make this 2nd gen compatible with whatever version driver and next gen moonlander there is. :]
|
|
|
|
rgr_rgr
Member
Offline
Activity: 115
Merit: 10
|
|
December 23, 2017, 11:19:10 AM |
|
4.How can I use some kind of bfgminer record? to be able to see what happend like 3 or 5 hours ago (errors, restarts, block finds...). I know what letters means but I want to see it as some kind of data file with all details through the time like I see it live on monitor. Is it even possible?
There are several possibilities to do it. Use -h as parameter for bfgminer, watch out for "log". Choose the ones suitable for you.
|
|
|
|
Trisko
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 23, 2017, 11:35:23 AM |
|
is there also a command to reboot USB?
|
|
|
|
Astrali
Full Member
Offline
Activity: 281
Merit: 130
Crypto Addicted
|
|
December 23, 2017, 01:27:27 PM Last edit: December 23, 2017, 01:58:43 PM by Astrali |
|
pi@raspberrypi:~ $ dmesg [1277666.945413] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [1277666.945533] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [1277667.037557] usb 1-1.4.3: USB disconnect, device number 57 [1277667.037986] cp210x ttyUSB0: failed set request 0x7 status: -19 [1277667.038007] cp210x ttyUSB0: failed set request 0x12 status: -19 [1277667.038020] cp210x ttyUSB0: failed set request 0x0 status: -19 [1277667.038519] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [1277667.038582] cp210x 1-1.4.3:1.0: device disconnected
this is what i get in dmesg when i attach my 4th moonlander from eyeboot. ideas whats causing this? lsusb won't find the device neither it will be seen by bfgminer Green light on, fan is running! Greetings - Astrali
|
|
|
|
markcarline2
Newbie
Offline
Activity: 42
Merit: 0
|
|
December 23, 2017, 01:30:03 PM |
|
Quick question for anyone here with a Raspberry PI 3 setup....
If I was to use a raspberry pi 3 standalone/headless (ie with no usb hub, keyboard or mouse attached) powered with the official pi power supply (2.5A) can anyone confirm if this will work and what speed they are able to achieve? (With stock voltage settings) ?
Thanks!
you cant directly plug your moonlander 2 to your PI. if you use a powered hub it doesnt matter which power supply you use for your PI - it should just be enough to power the PI They can achieve the speed they get on every other device .. like 5.5mh/s max i run mine on 4.3 mh/s Greetings - Astrali Well.....my 7th moonlander turned up today and as my existing hub is now at capacity I thought I would dust off a spare Pi3 & official Pi3 PSU (2.5A). It did manage to plug straight into one of the pi3 USB ports, detected fine. I tried running 600 speed and that works fine but trying the higher speed of 756 fails.
|
|
|
|
plamen_m
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 23, 2017, 02:54:19 PM |
|
You need to have at less 3A adapter for your pi3 or high amps on 5v.
|
|
|
|
thestockfadi
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 23, 2017, 03:26:19 PM |
|
|
|
|
|
thestockfadi
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 23, 2017, 03:52:51 PM |
|
no device error. . https://image.ibb.co/mxNcjm/no_device.pngNow back to the regular error which is telling me that MLD1 ASIC has stopped hashing, attempting to restart MLD1 : unrecognized response. . I have turned down the frequency to 384 as instructed . . At this frequency it's only hashing at 1.97 but I am still getting the MLD1 Errors. .
|
|
|
|
|