[ANN][preICO] CCA - REVOLUTION IN THE WORLD COMPOSITE CYLINDER MARKET

[Cylinders_io]

Do you know that liquefied gas inside a composite cylinder is an explosive and inflammable substance?

That’s why filling must be carried out in strict compliance with special regulations and using special technological equipment of gas-filling station. Domestic use of gas cylinder must also meet some requirements:
• gas cylinders must be stored in a box made of noncombustible materials with shutters for airing;
• if cylinder is placed near a wall then the distance to windows and doors of the first floor must be 0.5 meters, to windows and doors of basement – over 3 meters;
• in a room with heat radiators, gas cylinders must be placed 1 meter away from them;
• gas cylinder installed in a kitchen must be placed over 0.5 meters away from gas stove.

Composite gas cylinders from Composite Cylinders Advanced company are modern and safe cylinders of polymer materials with high speed of filling and the possibility of degasifying at an affordable price! More details about Composite Cylinders Advanced project on http://cylinders.io/index.html

[1714005636]

1714005636

[1714005636]

1714005636

[1714005636]

1714005636

[1714005636]

1714005636

[Cylinders_io]

Why are composite gas cylinders better than steel?

Stretch ceiling is quite a stylish decorative element, which stopped being a luxury and turned into a popular type of ceiling design long ago. Do you know that when mounting this kind of ceiling fan heaters are used, which were working from old, bulky and inconvenient gas cylinders till recently? And, actually, big weight of a steel gas cylinder is no the biggest of its disadvantages in this situation. The procedure of stretch ceiling mounting is a bit peculiar, thus when conducting it, the room temperature jumps and falls, while gas cylinder is in the room. Using metallic gas cylinders in this kind of conditions make this work not just complicated, but also dangerous for the life of workers and house residents!

That’s why the use of composite cylinders instead of steel ones for work with fan heaters is an important thing. Composite cylinders from Composite Cylinders Advanced company are made of thermostable polymer materials and are non-shatterable in case of explosion, which makes their use absolutely safe. More on http://cylinders.io/index.html

[Cylinders_io]

Our team: Viktor Goryachev

We’re continuing to introduce our Composite Cylinders Advanced project’s professional team to you! Today we’d like to tell you about Viktor Goryachev — our project’s chief instructor. Viktor is a design engineer with over 30 years of experience. Over the course of his professional activity he has been involved with the development and implementation of science intensive solutions in the field of energy and radioelectronics, patent research and measuring technical level of designed products, project coordination with representatives of supervising bodies and customers, and preparing documentation for participation in innovative projects and scientific and technical competitions.Got any questions for Viktor? You can ask him right here!

[Cylinders_io]

Hurry and get 50% bonus!

Composite Cylinders Advanced project’s token Pre-ICO is continuing! The project is focused on production of extra-light composite gas cylinders of polymer materials. Only at this stage you can purchase our tokens and get a 50% bonus!

The total amount of tokens that we prepare for sale at this stage is 20 million of CCA. The initial price of 1 CCA token is $0.025. All of the tokens of the project are issued on Ethereum platform, they can be purchased both for ETH and BTC.

Hurry! There is not much time left till the end of Pre-ICO stage. The start of the main stage of CCA token sales at $0.025 without 50% bonus is scheduled for the first quarter of 2018.

[Cylinders_io]

Period of CCA token preliminary sales is continuing!

We’re reminding you that the most advantageous for participation in the Composite Cylinders Advanced project period of CCA token preliminary sales is continuing! Join our high-tech project at the most profitable for you conditions, which is 50% discount!

This unique opportunity lasts only over the PreSale period. Details on Composite Cylinders Advanced project ICO on our website http://www.cylinders.io and in our White Paper document http://www.cylinders.io/documents/Whitepaper_ru.pdf.

[Cylinders_io]

Why do we choose type cylinders of the 4 types?

Liquefied natural gas is used throughout the world in the chemical industry and in the production of gas engine fuel. And if earlier the requirements of manufacturers were satisfied with cylinders of 1–3 types (all-metal or with partial composite protection), today products from polymeric materials are becoming more popular. This is due to their small mass, safety and economy of operation. When using compressed natural gas (Compressed Naturel Gas), these factors are decisive, and buyers are not repelled by even a high price.

When assessing the needs of the global market in cylinders of the 4 types and methods of their production, the CCA project (COMPOSITE CYLINDERS ADVANCED) was created. The team working on it has relevant experience in creating products from composite materials and knows how to reduce the cost of production, thereby increasing its market attractiveness. More about the project https://cylinders.io/

https://c.radikal.ru/c36/1801/63/b178ab702e9e.jpg

[Cylinders_io]

The unique technology of production and its plyusy

Today, millions of metal cylinders are used to store and transport natural and liquefied gas. For 2017, their number was 90 million and only 2% accounted for the share of composite products.

However, their number is constantly growing, and there are objective reasons for this:
• Light weight — the mass of composite cylinders is lower than metallic analogues.
• Safety — there are no fragments during the explosion.
• Cost of operation — maintenance of type 4 cylinders is cheaper.
• Durability — composite materials are not subject to corrosion.

The main factor holding back their production is a high price. The implementation of the CCA (COMPOSITE CYLINDERS ADVANCED) project will reduce their cost. Conducted calculations say that CCA products will not only cost less in manufacturing, but will also be of better quality than existing analogues.
The unique production technology reduces the gas permeability of the cylinder, accelerate its filling and allows its evacuation before refueling.

Details about the project https://cylinders.io/

https://a.radikal.ru/a27/1801/62/94c92191b8a8.jpg

[Cylinders_io]

Why do we guarantee the success of the project?

Today, more than 110 million gas cylinders are used in the world, of which 2% is for composite products. As shown by the studies carried out by COMPOSITE CYLINDERS ADVANCED, the operation of cylinders made of polymer materials (4 types) is cheaper and safer than its counterparts.

The CCA team has developed a project to organize the production of cylinders and for its successful implementation it has the necessary experience and knowledge. The main advantage of the project is its quick payback. In 2017, a team was assembled, an advertising campaign was prepared and launched, a financial scheme of the project was approved, a smart contract was created, and tokens were launched. In 2018, the organization of infrastructure, production and certification of products.

And already in 2019 it is planned to extract the first dividends. Investors invested in tokens will be redeemed or exchanged COMPOSITE CYLINDERS ADVANCED. https://cylinders.io/index.html

https://b.radikal.ru/b20/1801/4a/6916c21edcbd.jpg

[Cylinders_io]

We have great news: ICObench analyzed our project!

https://icobench.com/ico-analyzer?ico=cca

ICObench is an ICO rating supported by investors and financial experts. There are 1542 ICOs from 163 different countries on the platform.

And we remind: our pre-sale continues!

More details https://cylinders.io/

[Cylinders_io]

About the plans of the project CCA

Today, LPG metal cylinders are used for transportation and storage of gas. In 2017, at least 90 million units were in operation in the world, and their number is growing. The annual growth is fixed at 10%. However, gradually the usual containers are replaced with cylinders of type 4, made of composite materials. And it's not surprising - they meet all modern security requirements. This can not be said about metal bottles.

Professionalism, planning, quick results are signs of successful investment.The main reason that discourages potential customers from using composite cylinders is cost. The purpose of the CCA project (Composite Cylinders Advanced) is the creation of the same capacities, but accessible to a wide range of users. And for this, the project team has the necessary knowledge and real experience in the production of products from composite materials.

CCA products are able to compete on an equal footing with existing analogues. To launch the project, it is planned to attract decentralized direct investments, which allows to guarantee independence in its implementation. This is the first project in the world combining virtual technologies and reality.

Placing production areas is planned in the Czech Republic - a country with a developed working culture, and its geographical location allows to optimize logistics processes. The unique production technology will allow creating cylinders that exceed existing analogues in terms of cost and quality. A particular advantage of the project is its quick payback. The money invested in the project today, will begin to bring profits as early as next year. https://cylinders.io/index.html

https://c.radikal.ru/c04/1801/2e/178750a8d36f.jpg

[Cylinders_io]

Causes of demand for composite gas cylinders

Gas fuel is used for household needs, in the chemical industry, as automobile fuel, etc. And if a pipeline can be brought to stationary facilities from the central gas main or gas holder, in other cases a special container will be needed for transportation and storage.

At one time, for these purposes, all-metal cylinders - type 1 were exclusively used, followed by tanks with full or partial composite protection - type 2 and 3, today the safest are considered to be cylinders of type 4 - completely made of composite materials. Composite balloon is more safe for transportation - drop and impact will not lead to fatal consequences, while storing them you can make a friend against each other.

By the way, products are lighter than their counterparts by about 30%. This allows you to take them with you when traveling to nature, especially since they are compatible with most portable grills and barbecues. The only thing that prevents their spread is the price.

However, the CCA project team has developed a technology that allows to reduce costs in the production of composite cylinders, and therefore their market value, which will make them more attractive to a mass buyer. Investments in the project will make it possible to make a profit in a short time at an acceptable risk.

https://cylinders.io/index.html

https://a.radikal.ru/a38/1801/81/abd53c8c85ae.jpg

[Cylinders_io]

Hurry up to take part in the Pre-ICO!

We remind that the Pre-ICO of our project continues! Follow the update on the website at http://www.cylinders.io.

https://c.radikal.ru/c04/1801/39/8eace8ad8abc.jpg

[Cylinders_io]

About our developments

For over 17 years our team has been developing a unique technology for the production of polymer-composite cylinders of 4 type for storing LPG and CNG. Last year we started piloting the production line of composite cylinders in the Czech Republic.

Our research has shown that composite cylinders that we manufacture for gas storage, can be used for efficient hydrogen storage with minimal losses through the use of special low-permeability polymers in the production. Thanks to this method of storage, hydrogen can become a full replacement of traditional fuels for vehicles.

Today our company is running two projects to attract funding in the design and development of technologies for production of composite cylinders for storage of gas and hydrogen. To participate in the project on organization of production of gas composite cylinders for LPG and CNG, you can join our ICO and purchase the tokens CCA.

Detailed information about the conduct of the ICO is represented on the website https://cylinders.io. If you want to invest in the production of composite cylinders for hydrogen storage — join the crowdfunding of our project, information about which you can find in the link https://www.indiegogo.com/projects/cca-composite-cylinders-advanced#/.

https://d.radikal.ru/d22/1801/a9/8e8f9becbc26.jpg

[Cylinders_io]

Why do steel gas cylinders explode and how to avoid it?

The metal explosion of a gas cylinder indoor or in a car – it's an emergency fraught with most serious consequences. The situation becomes even more dangerous if there are any objects near a gas tank. The result of such accidents can be not only a loss of property but human casualties. Therefore, if due to any reasons or circumstances you use at home steel gas cylinder, you should be aware of the reasons that can result in its explosion.

1. The improper use and storage of gas cylinders.
If you loosely tighten the cylinder valve, the gas will begin to spread from it across the room. The slightest spark will cause an explosion of gas and fire. Or if you brought the balloon into a warm room from the cold. Extreme changes in temperature increase the pressure inside the gas cylinder and may lead to explosion.
2. Corrosion and microcracks, which are formed on the cylinder over time.

Such damages can be completely invisible from the outside, however, pose a greater threat in the form of threat of explosion of the cylinder.There are only two ways to avoid the explosion of a gas cylinder: strictly adhere to the rules of operation and storage of metal gas cylinders or refuse steel cylinders in favor of modern composite cylinders of 4 type. The choice is yours! Full information about high tech composite gas cylinders of 4-type Composite Cylinders Advanced is presented on the website http://cylinders.io.

https://c.radikal.ru/c13/1801/12/c41e5ff4b23d.jpg

[Cylinders_io]

The new technology of hydrogen production — a breakthrough in the future!

One of the most promising types of fuel is hydrogen. However, nowadays the process of its extraction is too slow and costly to ensure that the hydrogen could be widely disseminated — its production from water requires high temperatures and thus high energy costs.

A real breakthrough in the field of hydrogen production was the report of the scientists of the Osaka University (Japan) that they were able to develop alternative technology for the production of hydrogen. All that is necessary for a catalytic reaction according to the method are normal sunlight and room temperature.

Implementation of photocatalysis with the light has become possible thanks to the use of nanostructured black phosphorus and Bismuth vanadate. In fact, Japanese scientists have managed to copy the natural process of photosynthesis, in which the output is hydrogen and oxygen in the ratio 2:1.

We believe that the use of solar light for hydrogen production is a technology of the future, and very soon we are going to use hydrogen as a fuel! Our cylinders are made out of polymer-composite materials, they would be excellent for the hydrogen storage and make its use in everyday life as convenient as it is possible. More detailed information about our cylinders is on the website https://cylinders.io.

https://d.radikal.ru/d29/1801/ae/76fefe8ee235.jpg

[Cylinders_io]

Ecological and safety is the basis of our project!

Climatic and environmental changes have put forward new requirements for the modern fuel systems for vehicles. The most effective solution in today's scientific and technological progress is the use of hybrid engines.The composite gas cylinders of 4 type Composite Cylinders Advanced comply with all environmental requirements and in the future can also be used for hydrogen storage and the main fuel for additional energy sources – electrical batteries.

Today all composite cylinders of 4 type which are present on the market have several disadvantages:
· high level of gas tightness that is causing the threat of a gas explosion;
· limited operating temperature range of cylinders;
· the inability to vacuum before filling;
· low-speed filling of cylinders;
· high cost of production.

Due to our unique techniques of manufacturing of composite gas cylinders of 4 type, the cylinders CCA, which we will produce, won’t have all of the above disadvantages. In addition, our tanks will be resistant to chemical damage and corrosion. Let's make the world cleaner and safer with the composite cylinders of Composite Cylinders Advanced! To participate in the project Composite Cylinders Advanced: https://cylinders.io.

https://a.radikal.ru/a30/1801/15/195b547df308.jpg

[Cylinders_io]

Hurry up to buy the tokens CCA!

The pre-sale of the tokens of the project for the establishment of ultralight composite gas cylinders of the 4 type of Composite Cylinders Advanced is going on! Hurry up to buy the tokens CCA until the end of the Pre-ICO and get +35% bonus tokens!

RemindPre-sale 15.01.2018 till 15.03.2018, price $0.05. Purchase the tokens CCA with the maximum benefit! Join the project Composite Cylinders Advanced right now! Details on the website https://cylinders.io.

https://d.radikal.ru/d31/1801/27/ba5e445056db.jpg

[Cylinders_io]

Why have we chosen the Czech Republic to organize the production of our high-tech gas composite cylinders Composite Cylinders Advanced?

Because only in the Czech Republic we will be able to establish the most efficient and high quality production at the lowest price! The production capacity of our plant will be located in leased premises with a size of 400 square meters in Prague with a monthly lease cost of $ 800.

Today, the plant located there has all the necessary infrastructure for the manufacture of composite gas cylinders. Highly competent team of key experts of the project Composite Cylinders Advanced is ready to start working on the product at any time. The personnel of the plant will be hired among the local population that has a sufficiently high technical level.

Composite Cylinders Advanced – is a high-quality products at an affordable price! Read more about our project on the website https://cylinders.io.

https://d.radikal.ru/d11/1801/7c/110040a5f93b.jpg

[Cylinders_io]

Our team: Motigullin Aynur Bulatovich

And we continue our fascinating acquaintance with a professional team of the project Composite Cylinders Advanced, which has developed innovative technology for the production of ultra-light and explosion-proof gas cylinders of the 4 type!

Today we want to introduce you to our project engineer – Motigullin Aynur Bulatovich. Aynur – is a highly qualified specialist and a true professional of his craft. Within the framework of the project Composite Cylinders Advanced he is responsible for the modeling and analysis of engineering solutions, as well as for informational and analytical support of the project. Aynur – is a graduate of Moscow State Technical University named after Bauman.

Do you have questions about design features of the project Composite Cylinders Advanced to Aynur? You can ask them right here or contact him on social networks LinkedIn http://www.linkedin.com/in/aynur-motigullin, Facebook https://www.facebook.com/Motigullin or Telegram https://t.me/Aynur_M

https://a.radikal.ru/a15/1802/39/6626558683a0.jpg

[Cylinders_io]

Why are the composite gas cylinders of 4 type of CCA going to take a leading position on the market of gaseous motor fuel in the near future?

Because the cylinders of CCA surpass all counterparts existing today on the market not only in cost but also in basic technical characteristics:

· the speed of generation of the liner is 5–10 minutes (up to 6 times faster than analogues);
· weight is 0,3–0,35 kg/l (15% lighter than analogues);
· maximum temperature is 120°C (almost 2 times higher than analogues);
· speed of winding is 30 minutes (30% faster);
· presence of gas permeability;
· using a new type of polymers with features different from non-traditional polymer and processing techniques;
· development of a unique equipment for the production of the liner;
· meets the ISO 11119–3:2013;
· development of a private site of impregnation of the winding yarns;
· use of a unique composition to reduce the time of impregnation and drying.

The combination of all these benefits in one product, along with a massive trend of replacing metal cylinders with composite ones will allow Composite Cylinders Advanced to increase the gross income and to enter new markets.

More information about the project Composite Cylinders Advanced — on site https://cylinders.io.

https://d.radikal.ru/d31/1802/cf/acc98b2b9218.jpg