Bitcoin Forum
February 15, 2025, 09:49:29 AM *
News: Community Awards voting is open
 
   Home   Help Search Login Register More  
Pages: 1 2 3 4 5 6 7 8 9 [All]
  Print  
Author Topic: Baikal X10 Multialgo Miner (Non-official Support Thread)  (Read 7607 times)
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 25, 2017, 04:54:18 PM
Last edit: November 26, 2017, 04:45:07 PM by igotek
 #1

Baikal X10 Multialgo Miner



Today, I received my Baikal X10 miners. I was so excited for the Baikal X10 miners.

The package was so good as usual. Baikal team makes good packages for international shipping.

I selected %94 efficiency Platinum PSUs for the Baikal X10 miners.
My PSU has 16AVG cables like Baikal cables.
I also have %80 Gold+ efficiency DELL server PSUs.



One of the new alogrithm is Myriad-Groestl. I started mining on zpool. It was a disaster for me.
After 10 minutes, there is no any pending balance. Maybe pool luck. I will try zpool again.
Then I head to different DGB myriad-groestl pool. Haha ! Perfect. It works well.



Then I tried Skein algorithm. Uhm, the problem on the pool again.
If you have any trouble, just change the pool. It works for me.
I think both of the algoirthm works well. There is no problem.
Trust Baikal X10 miners.

Heat ? Aha, what is the heat ? it is so cool !
No more hot weather from the miners. 10 stars over 10 point.
Baikal made their best miner device.

Power need ? Aha, what is the power ? it is so cool !
Only 150 watt ? Aha ! Perfect.
Baikal made their best miner device.

Everyone asks the sound of the Baikal X10.
When I first started the miner, oh my god ! It was the half of the S9.
After I set the baikal-fan lower speed, aha, it is acceptable now.
No big noise from the miners.
Baikal made their best miner device.

is it worth to buy ? Absolutely Y E S !
Buy Baikal X10 miner and be happy.
Low noise, Very Very Low power needs, Not so hot weather.


You can put it running on the next room and sleep Smiley

If you want to set a static IP for your miner: https://bitcointalk.org/index.php?topic=2456384
It s not necessary but it is so usefull if you have lots of miners.

Where am I located at ? I live in Turkey. It is so hot here even it is winter time. And no need to use and air conditioner to keep the weather cold for X10 miners.

If you have any questions, feel free to ask.

************************************************************************************

Setting a static IP for Baikal Miners: Download

Baikal Scanner: Download
Baikal Scanner finds Baikal miners on the local network.

Baikal Monitor v1.4: Download
You can manage the Baikal miner by using Baikal Monitor v1.4
This is so usefull software.







I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Truthchanter
Sr. Member
****
Offline Offline

Activity: 689
Merit: 253


View Profile
November 25, 2017, 06:04:37 PM
 #2

What did you decide to mine in the end? skein? I got mine going on dgb qubit...
FISHSG
Newbie
*
Offline Offline

Activity: 37
Merit: 0


View Profile
November 26, 2017, 12:11:12 PM
 #3

Is the fan pulling cold air in? Or pushing hot air out Huh
VasySir
Newbie
*
Offline Offline

Activity: 24
Merit: 0


View Profile
November 26, 2017, 01:15:00 PM
 #4

What did you decide to mine in the end? skein? I got mine going on dgb qubit...

DGB (Myriad-Groestl) and Verge (Myriad-Groestl)

I mining two different coin on the same algo.
Verge (Myriad-Groestl) How much does it earn per day?
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
November 26, 2017, 01:15:44 PM
 #5

What did you decide to mine in the end? skein? I got mine going on dgb qubit...

DGB (Myriad-Groestl) and Verge (Myriad-Groestl)

I mining two different coin on the same algo.

Great! In which pool do you mine Verge (Myriad-Groestl)?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 26, 2017, 01:41:24 PM
Last edit: November 26, 2017, 02:53:08 PM by igotek
 #6

What did you decide to mine in the end? skein? I got mine going on dgb qubit...

DGB (Myriad-Groestl) and Verge (Myriad-Groestl)

I mining two different coin on the same algo.


Is the fan pulling cold air in? Or pushing hot air out Huh

The fan is pulling the air from outside to inside of the miner.

Great! In which pool do you mine Verge (Myriad-Groestl)?

http://xvg-mg.idcray.com/

the best Verge myriad-groestl pool that I ve ever seen.

Verge (Myriad-Groestl) How much does it earn per day?

Around 38 USD

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
mano237
Member
**
Offline Offline

Activity: 168
Merit: 10


View Profile
November 26, 2017, 01:43:03 PM
 #7

What did you decide to mine in the end? skein? I got mine going on dgb qubit...

DGB (Myriad-Groestl) and Verge (Myriad-Groestl)

I mining two different coin on the same algo.

Great! In which pool do you mine Verge (Myriad-Groestl)?

Should get mine x10 tomorrow.

I think I am gonna mine on nicehash quark/quibit.

But will test out others as well.
Truthchanter
Sr. Member
****
Offline Offline

Activity: 689
Merit: 253


View Profile
November 26, 2017, 01:55:05 PM
 #8

Is there a verge mining calculator for that algo? or how do you calculate the profitability?
n00bsaibot
Member
**
Offline Offline

Activity: 98
Merit: 10


View Profile
November 26, 2017, 01:57:12 PM
 #9

How much are this units and what is delivery waiting period?
Overlast
Newbie
*
Offline Offline

Activity: 41
Merit: 0


View Profile
November 26, 2017, 02:00:27 PM
 #10

Does anyone dare to do a prediction how long this machine will be profitable? A couple of months, half a year, a year or longer?
We know what happened to the D3, but this machine with 7 algo's has of course more potential...
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 26, 2017, 02:37:12 PM
Last edit: November 26, 2017, 03:02:15 PM by igotek
 #11

Is there a verge mining calculator for that algo? or how do you calculate the profitability?

There is no any calculator, but you can learn it after one hour mining on the pool statistic page.

How much are this units and what is delivery waiting period?

You have to wait for the next announcement. There is no any miner on sale right now.
The batch 3 or a new miner will be announced soon.


Should get mine x10 tomorrow.

I think I am gonna mine on nicehash quark/quibit.

But will test out others as well.

Nicehash gives the best rates at Quark.

Does anyone dare to do a prediction how long this machine will be profitable? A couple of months, half a year, a year or longer?
We know what happened to the D3, but this machine with 7 algo's has of course more potential...

D3 has only X11 algorithm.
X10 has 5 algorithms and there will be more 2 algorithms.
D3 cannot be compared to Baikal X10.

D3 was produced againt Baikal Giant+ A2000.
D3 miners received in the last of the October.
There is no any profit now.

Baikal Giant+ A2000 miners received in the early of the August.
The profability is 15 USD daily on nicehash. (X13 and X15)


Baikal is the best ASIC manufacturer.


I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
charles2k
Sr. Member
****
Offline Offline

Activity: 326
Merit: 250


View Profile
November 26, 2017, 03:03:23 PM
 #12

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...
n00bsaibot
Member
**
Offline Offline

Activity: 98
Merit: 10


View Profile
November 26, 2017, 03:05:15 PM
 #13

Is there a verge mining calculator for that algo? or how do you calculate the profitability?

There is no any calculator, but you can learn it after one hour mining on the pool statistic page.

How much are this units and what is delivery waiting period?

You have to wait for the next announcement. There is no any miner on sale right now.
The batch 3 or a new miner will be announced soon.


Thanks ... any speculations how profitable will they be?
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 26, 2017, 03:18:35 PM
 #14

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.


Thanks ... any speculations how profitable will they be?

Baikal Giant+ A2000 miners received in the early of the August.
The profability is 15 USD daily on nicehash. (X13 and X15)
I think the Baikal X10 will be profitable one year at least.
The ROI is 1-2 months at the worst case scenario.
So, buy Baikal X10 and earn money Smiley


I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
charles2k
Sr. Member
****
Offline Offline

Activity: 326
Merit: 250


View Profile
November 26, 2017, 03:29:23 PM
 #15

I am always in contact directly with Baikal. In the past I bought a lot of various miners from them.
My friend and I paid all shipping fees. And still nothing. No shipping info. We never had problems with customs office, problem is that Baikal did not sent goods and he continues to extend delivery times or does not respond.

So I am asking you when EXACTly did you order and pay, it is very strange, that you received goods and other customers not.


When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.


Thanks ... any speculations how profitable will they be?

Baikal Giant+ A2000 miners received in the early of the August.
The profability is 15 USD daily on nicehash. (X13 and X15)
I think the Baikal X10 will be profitable one year at least.
The ROI is 1-2 months at the worst case scenario.
So, buy Baikal X10 and earn money Smiley


igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 26, 2017, 03:54:00 PM
 #16

Many customers is receiving their miners lately. I hope Baikal will tell you the reason when they see this thread. It is Sunday now. Please be patience. If you have any questions about the Baikal miners, I can help about it but not about the delivery.

I have Baikal mini miner, Baikal Cube miner, Baikal Giant+ A2000 miner and Baikal X10 miner. So I can help you if you have any trouble with the miners.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Overlast
Newbie
*
Offline Offline

Activity: 41
Merit: 0


View Profile
November 26, 2017, 04:05:52 PM
 #17

Does one have to download additional Baikal software like: Baikalmonitor, Baikalscanner etc.?
Or does X10 have a built-in web based interface?
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 26, 2017, 04:44:51 PM
Last edit: November 26, 2017, 05:22:12 PM by igotek
 #18

Does one have to download additional Baikal software like: Baikalmonitor, Baikalscanner etc.?
Or does X10 have a built-in web based interface?

Setting a static IP for Baikal Miners: Download

Baikal Scanner: Download
Baikal Scanner finds Baikal miners on the local network.

Baikal Monitor v1.4: Download
You can manage the Baikal miner by using Baikal Monitor v1.4
This is so usefull software.


I also attached the download links to the first post.


I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
November 26, 2017, 05:06:50 PM
 #19

Does one have to download additional Baikal software like: Baikalmonitor, Baikalscanner etc.?
Or does X10 have a built-in web based interface?

Setting a static IP for Baikal Miners: Download

Baikal Scanner: Download
Baikal Scanner finds Baikal miners on the local network.

Baikal Monitor v1.4: Download
You can manage the Baikal miner by using Baikal Monitor v1.4
This is so usefull software.


I also attached the download links to the first post.

but those are additional programs. As i understand you can run miner and without them?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 26, 2017, 05:23:37 PM
Last edit: November 26, 2017, 05:35:22 PM by igotek
 #20

but those are additional programs. As i understand you can run miner and without them?

You can run Baikal miners standalone. No need to use any additional software.
There are additional softwares to manage the Baikal miners.
Baikal made these softwares. Well, you can use them without any risk.
Check the attached image. You can see all of the Baikal Miners on your local network.
You can manage them.



I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Overlast
Newbie
*
Offline Offline

Activity: 41
Merit: 0


View Profile
November 26, 2017, 05:40:04 PM
 #21

Clear!
Thanks.

But what do i see in the photo? Are there 2 X10's that are not ok (sick)? Less hashrate?
bigal82
Newbie
*
Offline Offline

Activity: 11
Merit: 0


View Profile
November 26, 2017, 06:06:47 PM
 #22

hey igotek,
which kind of PSUs are you using?

alex
jb7032
Full Member
***
Offline Offline

Activity: 182
Merit: 100


View Profile
November 26, 2017, 06:11:49 PM
 #23

Igotek, Although I secretly dislike you due to the fact you have your miners and I don't, thank you for sharing. The info you are providing will help us get off the ground running much faster once we have our units. Keep up the good work.
GunsN
Full Member
***
Offline Offline

Activity: 262
Merit: 100



View Profile
November 26, 2017, 06:19:21 PM
 #24

Thank you for this thread.
it is very usefull, I am waiting my miners next week Smiley

♫ ♪ ♪ ♫ ♩
Trust Us
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 26, 2017, 06:51:57 PM
 #25

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Marvell2
Full Member
***
Offline Offline

Activity: 1148
Merit: 132


View Profile
November 26, 2017, 08:15:40 PM
 #26

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.


so many miners , I only ordered two not even first batch
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
November 26, 2017, 08:23:03 PM
 #27

Thanks for the usefull info, igotek. Which brand of Platinum Quality 2400 Watt PSU are you using? Thanks for sharing all that info Wink

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 27, 2017, 08:28:11 AM
 #28

Thanks for the usefull info, igotek. Which brand of Platinum Quality 2400 Watt PSU are you using? Thanks for sharing all that info Wink

I have PSU from DELL, HP and Delta.
You can check aliexpress for PSU.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
phuocduong
Member
**
Offline Offline

Activity: 182
Merit: 10


View Profile
November 27, 2017, 10:09:12 AM
 #29

dont have baikal to use it, i hope have x10 soon, thanks for you share app
ZenoDiac
Jr. Member
*
Offline Offline

Activity: 42
Merit: 1


View Profile
November 27, 2017, 12:05:46 PM
 #30

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.


Hi Igotek

Thanks for your post and the pictures. Very nice!
Could you confirm if these direct Baikal banking details are correct? Because this is what they sent me:

"USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001."

I have some trust issue sending money off to a beneficiary in the Marshall Islands...
THanks in advance Smiley
GunsN
Full Member
***
Offline Offline

Activity: 262
Merit: 100



View Profile
November 27, 2017, 12:30:21 PM
 #31

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.

I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks

♫ ♪ ♪ ♫ ♩
Trust Us
craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
November 27, 2017, 01:04:06 PM
 #32

Hey

Got my X10 and running well on zpool. I have been playing with solo mining directly to a local wallet, but I can't get it to work. Has anyone managed to achieve solo mining? I know it may be less profitable, but I want to be able to mine new coins that aren't in pools.

Thanks

C.
Shorty2520
Member
**
Offline Offline

Activity: 165
Merit: 11


View Profile
November 27, 2017, 01:34:25 PM
 #33

First of all great post igotek!

I have a question that baikal can‘t answer (misunderstanding in the meaning).

1.
Are the miners updated when they arrive? (I have 2nd batch)
If not .. what is the official source?

2.
And does the orange pi need a extra SD-Card, or is it included?



Can you please tell igotek? Thanks
jb7032
Full Member
***
Offline Offline

Activity: 182
Merit: 100


View Profile
November 27, 2017, 01:49:26 PM
 #34

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.



@jb7032
@GunsN

When you get your miners, you will be ready for mining.

I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks
For sure, Depending on which algo you are mining you could easily power both units off of a single 1200w server psu. Assuming you won't be mining X11 the most they will pull is 390w according to the website. In a million years when they ship mine I will do at least 2 of my 3 from a single 1200w hp unit.
RfBTC
Member
**
Offline Offline

Activity: 68
Merit: 10


View Profile
November 27, 2017, 02:06:08 PM
 #35


Hello


Baikal X10,  at 10 GH/s Quark  mines 0,004 BTC / day (around 40$/day)  with  only 180w  ?   thats true ?  could you upload screenshot with Wattage comsuption & mined amount ?    thanks


P.D. Past week  the profit was around 60$ / day , now its 40$ / day
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 27, 2017, 02:11:59 PM
Last edit: November 27, 2017, 02:22:05 PM by igotek
 #36

Hi Igotek

Thanks for your post and the pictures. Very nice!
Could you confirm if these direct Baikal banking details are correct? Because this is what they sent me:

"USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001."

I have some trust issue sending money off to a beneficiary in the Marshall Islands...
THanks in advance Smiley

USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001

This is their bank account.
I paid to this bank account.
Trust Baikal, they ship the miners.


Hey

Got my X10 and running well on zpool. I have been playing with solo mining directly to a local wallet, but I can't get it to work. Has anyone managed to achieve solo mining? I know it may be less profitable, but I want to be able to mine new coins that aren't in pools.

Thanks

C.

The solo mining with ASIC is not possible at the moment.
If anyone find it, it will be perfect.


I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks

Please be sure you connect one miner to this PSU and set the pools. (Dont set any X11 pools.)
Then do the same for the second miner.
All done !
You can connect two Baikal X10 to HP 1200 Watt.
And one miner is enough for two Baikal X10.

If you want to mine X11 coins, only use one PSU to one miner.


First of all great post igotek!

I have a question that baikal can‘t answer (misunderstanding in the meaning).

1.
Are the miners updated when they arrive? (I have 2nd batch)
If not .. what is the official source?

2.
And does the orange pi need a extra SD-Card, or is it included?



Can you please tell igotek? Thanks

1. It s not clear now. They didnt announce the time of the other two algorithms yet.
2. Yes, there is an Orange Pi Zero with a SDCARD on each miner.


Hello


Baikal X10,  at 10 GH/s Quark  mines 0,004 BTC / day (around 40$/day)  with  only 180w  ?   thats true ?  could you upload screenshot with Wattage comsuption & mined amount ?    thanks


P.D. Past week  the profit was around 60$ / day , now its 40$ / day

Quark algorithm needs 360 Watt for 10 GH/s. Tested with wattmeter.
I have only tested and checked all algorithms and voltage and fan loud.
The profit is good. For Quark algo, Nicehash gives the best profit.
The daily profit is around 40 USD now.


I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
November 27, 2017, 02:26:26 PM
 #37


Hello


Baikal X10,  at 10 GH/s Quark  mines 0,004 BTC / day (around 40$/day)  with  only 180w  ?   thats true ?  could you upload screenshot with Wattage comsuption & mined amount ?    thanks


P.D. Past week  the profit was around 60$ / day , now its 40$ / day

Quark runs at 360W according to the specification: https://pbs.twimg.com/media/DNYbXcfV4AA2LO7.jpg:large

I'm going to test real-world wattage when my electricity monitor arrives later this week.

I think Quark is more like $35 a day profit after electricity costs. Still too early for me to tell for sure!

C.
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
November 27, 2017, 08:53:08 PM
 #38

igotek, are you using these adapters with your hp psu https://www.ebay.com/itm/DPS-1200FB-800GB-Power-Supply-Breakout-Board-Adapter-Fur-Ethereum-Mining-/222593665370?hash=item33d39dc95a ?

i see only 9 pci-e slots in it. How can you connect two x10 to one psu, when one x10 needs 6 pci-e slots?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
mano237
Member
**
Offline Offline

Activity: 168
Merit: 10


View Profile
November 27, 2017, 09:19:41 PM
 #39

Hello!
I can call myself a happy one because I also got mine today & already tried out nicehash quark and dgb myr griestl.

But what I am thinking about is mining poolhub. Its possible there to mine every algo on miningpoolhub which the X10 supports if I am right.
So it would be a great choice to go with miningpoolhub because the miner switches to the coin which is the profitablest one atm. (I read something about that, thats right?) Furthermore I can auto exchange it to any coin I want.
Is there any disadvantage with miningpoolhub?
Somebody alrdy tested ? Smiley
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 27, 2017, 10:25:45 PM
Last edit: November 27, 2017, 11:14:19 PM by igotek
 #40

igotek, are you using these adapters with your hp psu https://www.ebay.com/itm/DPS-1200FB-800GB-Power-Supply-Breakout-Board-Adapter-Fur-Ethereum-Mining-/222593665370?hash=item33d39dc95a ?

i see only 9 pci-e slots in it. How can you connect two x10 to one psu, when one x10 needs 6 pci-e slots?

Check this link

I use the same break out board for the PSU.
I have 2400 Watt Paltinum PSU and it can be connected to two breakout board.
Each breakout board has 9 X 6 PIN power connector.
I have total 8 X 6 PIN power cables on a PSU.
Just calculate your power needs then connect it.
Be careful whlie connecting multiple X10 to a PSU.


Hello!
I can call myself a happy one because I also got mine today & already tried out nicehash quark and dgb myr griestl.

But what I am thinking about is mining poolhub. Its possible there to mine every algo on miningpoolhub which the X10 supports if I am right.
So it would be a great choice to go with miningpoolhub because the miner switches to the coin which is the profitablest one atm. (I read something about that, thats right?) Furthermore I can auto exchange it to any coin I want.
Is there any disadvantage with miningpoolhub?
Somebody alrdy tested ? Smiley

I have never trid miningpoolhub with X10. But I have used their pool with Cube and mini miners Baikal.
It was good. Not bad.

The profitable coin mining is possible for Quark, Qubit, and X11 with Nicehash.
Myriad groestl with zpool
Skein with zpool
I dont like zpool. it give less coin than the other pools.

DGB Myriad-Gorestl: https://dgb-groestl.theblocksfactory.com
VERGE Myriad-Groestl: http://xvg-mg.idcray.com/

I use these two pools which are the best pools now for Baikal X10.
There are different pools around. Just try them and post your results here.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Dlikrot
Full Member
***
Offline Offline

Activity: 230
Merit: 101



View Profile
November 27, 2017, 10:33:46 PM
 #41

If someone got x13 working on these it would be amazing.... It’s probably left out on purpose

BTC and KFC
miropp
Full Member
***
Offline Offline

Activity: 810
Merit: 101



View Profile
November 28, 2017, 12:03:59 AM
 #42

I have the same question about your payment date, you did not answered it.
Most of customer did not received any miner, you and some people yes and I do not understand why.

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.



craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
November 28, 2017, 12:14:10 AM
Last edit: November 28, 2017, 12:36:39 AM by craigh
 #43

I have the same question about your payment date, you did not answered it.
Most of customer did not received any miner, you and some people yes and I do not understand why.

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.



i paid on 13th September. Payment confirmation email 15th September. Waybill email on 22nd November. Delivered to UK on 25th November.

My order was for 1 x Baikal Giant X10 directly from Baikal for $1188 via wire transfer.
n00bsaibot
Member
**
Offline Offline

Activity: 98
Merit: 10


View Profile
November 28, 2017, 12:47:57 AM
 #44

When will this units be available for purchase again?
GunsN
Full Member
***
Offline Offline

Activity: 262
Merit: 100



View Profile
November 28, 2017, 04:58:46 AM
 #45

When will this units be available for purchase again?
nobody knows about it

♫ ♪ ♪ ♫ ♩
Trust Us
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 28, 2017, 09:23:40 AM
 #46

If someone got x13 working on these it would be amazing.... It’s probably left out on purpose

X13 algorithm will not work on Baikal X13.


When will this units be available for purchase again?

There is no any announcement about it. I m looking forward to getting new miners on the next batch.
Baikal X10 is the best miner that I have ever seen.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
percy_tc
Full Member
***
Offline Offline

Activity: 585
Merit: 106


View Profile
November 28, 2017, 10:45:44 AM
 #47

Have anyone tried to swap Giant+ and X10  (and vice-versa) software on SD card?
Steven3iii
Full Member
***
Offline Offline

Activity: 238
Merit: 100


View Profile
November 28, 2017, 12:30:41 PM
 #48

I think these guys may actually be from Baikal. There. I said it out loud.  Grinç

★ ★ ★ ★ ★   DeepOnion    Anonymous and Untraceable Cryptocurrency    TOR INTEGRATED & SECURED   ★ ★ ★ ★ ★
› › › › ›  JOIN THE NEW AIRDROP ✈️        VERIFIED WITH DEEPVAULT  ‹ ‹ ‹ ‹ ‹
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬   ANN  WHITEPAPER  FACEBOOK  TWITTER  YOUTUBE  FORUM   ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
November 28, 2017, 01:36:47 PM
 #49

I think these guys may actually be from Baikal. There. I said it out loud.  Grinç

Not sure how I prove I'm not?  Huh

Maybe I just got lucky! This is my first foray into mining. I did consider buying a D3, but I'm glad I didn't as X11 isn't very profitable now.

I'll post profitability results after my first full 24 hours of mining (I spent some time playing with trying to set-up solo mining as a learning exercise, but failed!).

C.
tonnynguyen
Hero Member
*****
Offline Offline

Activity: 658
Merit: 500



View Profile
November 28, 2017, 02:04:32 PM
 #50

@Igotek : You answered a lot of questions in my heart. Thanks very much . I am waiting 30 baikal X10 from seller Vietnam. They said they would send it to us from 10th November, but then it was delay to 9th December, I was very sad.

           ▀██▄ ▄██▀
            ▐█████▌
           ▄███▀███▄
         ▄████▄  ▀███▄
       ▄███▀ ▀██▄  ▀███▄
     ▄███▀  ▄█████▄  ▀███▄
   ▄███▀  ▄███▀ ▀███▄  ▀███▄
  ███▀  ▄████▌   ▐████▄  ▀███
 ███   ██▀  ██▄ ▄██  ▀██   ███
███   ███  ███   ███  ███   ███
███   ███   ███████   ███   ███
 ███   ███▄▄       ▄▄███   ███
  ███▄   ▀▀█████████▀▀   ▄███
   ▀████▄▄           ▄▄████▀
      ▀▀███████████████▀▀
DeepOnion
.Anonymous and Untraceable.
ANN  Whitepaper  Facebook  Twitter  Telegram  Discord 





      ▄▄██████████▄▄
    ▄███▀▀      ▀▀█▀   ▄▄
   ███▀              ▄███
  ███              ▄███▀   ▄▄
 ███▌  ▄▄▄▄      ▄███▀   ▄███
▐███  ██████   ▄███▀   ▄███▀
███▌ ███  ███▄███▀   ▄███▀
███▌ ███   ████▀   ▄███▀
███▌  ███   █▀   ▄███▀  ███
▐███   ███     ▄███▀   ███
 ███▌   ███  ▄███▀     ███
  ███    ██████▀      ███
   ███▄             ▄███
    ▀███▄▄       ▄▄███▀
      ▀▀███████████▀▀
.
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 28, 2017, 02:41:56 PM
 #51

Have anyone tried to swap Giant+ and X10  (and vice-versa) software on SD card?

I did it. No device running error code.
So it doesnt work.


I think these guys may actually be from Baikal. There. I said it out loud.  Grinç

I m not the part of the Baikal Team. I live in Turkey.
I m a Baikal customer and trying to help the community for free.


@Igotek : You answered a lot of questions in my heart. Thanks very much . I am waiting 30 baikal X10 from seller Vietnam. They said they would send it to us from 10th November, but then it was delay to 9th December, I was very sad.

I hope you will receive your miners soon. If you have any questiions, feel free to ask. I m here to help.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Gedash
Newbie
*
Offline Offline

Activity: 37
Merit: 0


View Profile
November 28, 2017, 03:13:54 PM
 #52

Igotek does your automated algo switching on Nicehash and ZPool work?
Miningpoolhub works for me, however on Nicehash my X10 keeps mining the first pool in the list and ZPool even shows all Pools as dead (same settings work on my GPU miners i used as a test)
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
November 28, 2017, 03:57:30 PM
 #53

igotek, are you using these adapters with your hp psu https://www.ebay.com/itm/DPS-1200FB-800GB-Power-Supply-Breakout-Board-Adapter-Fur-Ethereum-Mining-/222593665370?hash=item33d39dc95a ?

i see only 9 pci-e slots in it. How can you connect two x10 to one psu, when one x10 needs 6 pci-e slots?

Check this link

do you have that link in english, i can't understand turkish Smiley btw, how many verge coins you get per day in VERGE Myriad-Groestl: http://xvg-mg.idcray.com/ pool?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 28, 2017, 04:28:49 PM
 #54

Igotek does your automated algo switching on Nicehash and ZPool work?
Miningpoolhub works for me, however on Nicehash my X10 keeps mining the first pool in the list and ZPool even shows all Pools as dead (same settings work on my GPU miners i used as a test)

enable-nicehashsma        true

Please add SGMINER option. Then save the options. This is for Nicehash.


do you have that link in english, i can't understand turkish Smiley btw, how many verge coins you get per day in VERGE Myriad-Groestl: http://xvg-mg.idcray.com/ pool?

it is aliexpress, just change the language to your language.

Around 7000 XVG with a Baikal X10 on http://xvg-mg.idcray.com/ pool

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Gedash
Newbie
*
Offline Offline

Activity: 37
Merit: 0


View Profile
November 28, 2017, 05:23:09 PM
 #55

Igotek does your automated algo switching on Nicehash and ZPool work?
Miningpoolhub works for me, however on Nicehash my X10 keeps mining the first pool in the list and ZPool even shows all Pools as dead (same settings work on my GPU miners i used as a test)

enable-nicehashsma        true

Please add SGMINER option. Then save the options. This is for Nicehash.

Thanks for your feedback. However as soon as i add enable-nicehashsma   true under sgminer  i get the "miner down" message and the miner is not hashing anything
VasySir
Newbie
*
Offline Offline

Activity: 24
Merit: 0


View Profile
November 28, 2017, 05:44:55 PM
 #56

I received a message from China to buy baikai x10, it is written that it can extract coin HSR, BTC, I do not know the truth or not.
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 28, 2017, 05:54:00 PM
 #57

Igotek does your automated algo switching on Nicehash and ZPool work?
Miningpoolhub works for me, however on Nicehash my X10 keeps mining the first pool in the list and ZPool even shows all Pools as dead (same settings work on my GPU miners i used as a test)

enable-nicehashsma        true

Please add SGMINER option. Then save the options. This is for Nicehash.

Thanks for your feedback. However as soon as i add enable-nicehashsma   true under sgminer  i get the "miner down" message and the miner is not hashing anything

It happens on me if I choose eu nicehash. But when i try to different server of nicehash,it works.
Please try different servers of nicehash. Japan, USA etc.


I received a message from China to buy baikai x10, it is written that it can extract coin HSR, BTC, I do not know the truth or not.

It is not true, Baikal X10 cannot mine HSR and BTC.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
November 28, 2017, 06:30:33 PM
 #58

Well, my first 24 hrs of constant mining has yield $50 profit after electricity costs. Hope it lasts for a while! If it does, ROI will be achieved before Christmas!

C.
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
November 28, 2017, 06:37:08 PM
 #59

Well, my first 24 hrs of constant mining has yield $50 profit after electricity costs. Hope it lasts for a while! If it does, ROI will be achieved before Christmas!

C.

great! what do you mine?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
November 28, 2017, 06:56:44 PM
 #60

DigiByte myriad-groestl for my 1st 24 hours.
crairezx20
Legendary
*
Offline Offline

Activity: 1638
Merit: 1046



View Profile
November 28, 2017, 07:22:25 PM
 #61

What does Baikal x10 could mine this is a multi algo? do you have any experience about this hardware ..
I was honestly planning to buy hardware but confused if what hardware to best choice and more profitable..
I heard that baikal x10 only few boards are running but the other are not.. ?
mano237
Member
**
Offline Offline

Activity: 168
Merit: 10


View Profile
November 28, 2017, 10:52:08 PM
 #62

What do you think about the suprnova myr groestl pool?

Payout etc. working fine? Can somebody recommend this pool?  Wink
linda94
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
November 29, 2017, 04:12:55 AM
 #63

DigiByte myriad-groestl for my 1st 24 hours.
That is a quite good number.Which pool you use?Hope when i got my miner still keep this ROI.
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 29, 2017, 08:49:00 AM
 #64

What does Baikal x10 could mine this is a multi algo? do you have any experience about this hardware ..
I was honestly planning to buy hardware but confused if what hardware to best choice and more profitable..
I heard that baikal x10 only few boards are running but the other are not.. ?

Baikal X10 is the most profitable ASIC miner.
Baikal Giant+ A2000 and Bitmain Antminer L3+ are the second flag in the ASIC world.


What do you think about the suprnova myr groestl pool?

Payout etc. working fine? Can somebody recommend this pool?  Wink

I m mining suprnova zen pool at the moment. It is good. I have mined on hush pool in the past.
It is good. But I have never mined on the DGB groestl pool.
Suprnova payouts are good on all the pools all the time. But you have to check pool luck.
Just mine and post your results here.




I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
VasySir
Newbie
*
Offline Offline

Activity: 24
Merit: 0


View Profile
November 29, 2017, 09:42:50 AM
 #65

Can I get coin on the wallet of the exchange?
crytotronik
Member
**
Offline Offline

Activity: 147
Merit: 10


View Profile
November 29, 2017, 01:11:27 PM
 #66

I get really angry to see some people are mining already and I still have no waybill or any information when my miner will be shipped.  So I payed more than 1000$ additional to asicminermarket, just to see that nobody cares when I will get my miner. This is just not fair!
linda94
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
November 30, 2017, 04:22:55 AM
 #67

I get really angry to see some people are mining already and I still have no waybill or any information when my miner will be shipped.  So I payed more than 1000$ additional to asicminermarket, just to see that nobody cares when I will get my miner. This is just not fair!
Yep that sounds bad.People always think the big online shop will have miner first,now i know not like that from your experience.I see from the forum a lot people still waiting and more people received their miner.Hope you are the lucky next one.
Gedash
Newbie
*
Offline Offline

Activity: 37
Merit: 0


View Profile
November 30, 2017, 12:59:03 PM
 #68

Igotek does your automated algo switching on Nicehash and ZPool work?
Miningpoolhub works for me, however on Nicehash my X10 keeps mining the first pool in the list and ZPool even shows all Pools as dead (same settings work on my GPU miners i used as a test)

enable-nicehashsma        true

Please add SGMINER option. Then save the options. This is for Nicehash.

Thanks for your feedback. However as soon as i add enable-nicehashsma   true under sgminer  i get the "miner down" message and the miner is not hashing anything

It happens on me if I choose eu nicehash. But when i try to different server of nicehash,it works.
Please try different servers of nicehash. Japan, USA etc.

I tried usa,jp,hk,everything. as soon as i add nicehash pools with the sgminer option "enable-nicehashsma" "true" my miner goes down Sad .
I cant find the error
geraldgold
Member
**
Offline Offline

Activity: 64
Merit: 10

to the moon


View Profile
November 30, 2017, 01:25:32 PM
 #69

so this miner has a fee? then the miners will avoid it. atleast put pool fee or dev fee.

keep it up.
crytotronik
Member
**
Offline Offline

Activity: 147
Merit: 10


View Profile
November 30, 2017, 03:29:31 PM
 #70

so this miner has a fee? then the miners will avoid it. atleast put pool fee or dev fee.

Sorry dude, I have to comment posts like yours. Do you really expect an answer? What you wrote makes no sense. The words are in english...but they (the words) are randomly arranged. Fee on a Asic machine? What? Fee on pools? Sure!
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
November 30, 2017, 11:32:49 PM
 #71

Can I get coin on the wallet of the exchange?

Baikal only mines on whichever algo and coin.
Most of the exchanges accepts payments from the pools.
The pool will pay to the exchange's wallet, not Baikal.


I get really angry to see some people are mining already and I still have no waybill or any information when my miner will be shipped.  So I payed more than 1000$ additional to asicminermarket, just to see that nobody cares when I will get my miner. This is just not fair!

Many people are receiving their miners lately.
Just check the pools, you can see there are more miner with a few miners day by day.


@Gedash


My skpye is "igotek". Add me in the Skype.
I can check your miner via Teamviewer when I have free time.


so this miner has a fee? then the miners will avoid it. atleast put pool fee or dev fee.

There is no any devfee. You pay only for the miner, PSU and power.
You buy ASIC device, not a free miner software.







I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
mano237
Member
**
Offline Offline

Activity: 168
Merit: 10


View Profile
December 05, 2017, 09:40:45 PM
 #72

When I restart my miner, after some days I cant reach him over the IP Adress he got.
He is still mining but I cant check and change something per remote because I even cant find the miner with the baikal ip software.
Somebody experiencing the same problem?

You guys changed the ip address to a fix one?
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
December 05, 2017, 10:16:34 PM
 #73

When I restart my miner, after some days I cant reach him over the IP Adress he got.
He is still mining but I cant check and change something per remote because I even cant find the miner with the baikal ip software.
Somebody experiencing the same problem?

You guys changed the ip address to a fix one?

It happens sometimes on two of the machines. I use smart power plugs. When i realised it, I restart the miner via smart plug.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
December 06, 2017, 01:43:05 PM
 #74

When I restart my miner, after some days I cant reach him over the IP Adress he got.
He is still mining but I cant check and change something per remote because I even cant find the miner with the baikal ip software.
Somebody experiencing the same problem?

You guys changed the ip address to a fix one?

Many home routers have the ability for their DHCP server to assign an IP address to a device manually so that the device always gets the same IP. Maybe that would help?

You could also try ipconfig /flushdns and nbtstat -R then try ping baikal to see if the IP address has changed. Your router should also have a client list of all attached devices and their IP.
XrayHunter7
Newbie
*
Offline Offline

Activity: 67
Merit: 0


View Profile
December 12, 2017, 09:11:15 PM
 #75

@igotek

Hi, im mining with x10 for 4 days.
My results:
http://xvg-mg.idcray.com / https://dgb-groestl.theblocksfactory.com/   Best pools
zpool for quark/mygr/qubit/skein  bad
miningpoolhub  not bad
nicehash is down Sad
suprnova same as miningpoolhub - maybe a little bit better
I have few questions
When I set fan speed bellow 48%  Fan starts doing this - 30%.....1sec60%.......30%.......1sec60%. Every 10seconds fan goes to 60% for 1sec. Why ?
Temp is really good 20C, I wonder If its possible to overlock... ?
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 15, 2017, 03:19:20 AM
 #76

@igotek

i like this thread, i need your guidance on two issues:-

1. Do you think this psu can run two giant x10s?
http://www.corsair.com/en-us/hxi-series-hx1200i-high-performance-atx-power-supply-1200-watt-80-plus-platinum-certified-psu

2. How and where can i modify fan speed as i am using skein only.

thank you.
jb7032
Full Member
***
Offline Offline

Activity: 182
Merit: 100


View Profile
December 15, 2017, 03:52:18 AM
 #77

@igotek

i like this thread, i need your guidance on two issues:-

1. Do you think this psu can run two giant x10s?
http://www.corsair.com/en-us/hxi-series-hx1200i-high-performance-atx-power-supply-1200-watt-80-plus-platinum-certified-psu

2. How and where can i modify fan speed as i am using skein only.

thank you.

If you log into the miner its on the same page where you set your pools. Towards the bottom. 1200 watts should be plenty as long as you aren't mining x11 aglo.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 15, 2017, 04:07:37 AM
 #78

@igotek

i like this thread, i need your guidance on two issues:-

1. Do you think this psu can run two giant x10s?
http://www.corsair.com/en-us/hxi-series-hx1200i-high-performance-atx-power-supply-1200-watt-80-plus-platinum-certified-psu

2. How and where can i modify fan speed as i am using skein only.

thank you.

If you log into the miner its on the same page where you set your pools. Towards the bottom. 1200 watts should be plenty as long as you aren't mining x11 aglo.

Thanks, it worked  Smiley

regarding PSU, i dont plan to run x11
for this PSU i have question, can you look at picture of PSU and tell me how many Giant X10 i will be able to connect using available connectors in this PSU?
http://www.corsair.com/en-us/hxi-series-hx1200i-high-performance-atx-power-supply-1200-watt-80-plus-platinum-certified-psu
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
December 15, 2017, 08:23:46 AM
 #79

@igotek

i like this thread, i need your guidance on two issues:-

1. Do you think this psu can run two giant x10s?
http://www.corsair.com/en-us/hxi-series-hx1200i-high-performance-atx-power-supply-1200-watt-80-plus-platinum-certified-psu

2. How and where can i modify fan speed as i am using skein only.

thank you.

If you log into the miner its on the same page where you set your pools. Towards the bottom. 1200 watts should be plenty as long as you aren't mining x11 aglo.

Thanks, it worked  Smiley

regarding PSU, i dont plan to run x11
for this PSU i have question, can you look at picture of PSU and tell me how many Giant X10 i will be able to connect using available connectors in this PSU?
http://www.corsair.com/en-us/hxi-series-hx1200i-high-performance-atx-power-supply-1200-watt-80-plus-platinum-certified-psu

i see only 4 pci-e sockets. As far as i know x10 needs 6 sockets. Correct me if i am wrong.

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
crytotronik
Member
**
Offline Offline

Activity: 147
Merit: 10


View Profile
December 15, 2017, 11:33:52 AM
 #80

Someone else have this issue:

I set the fan speed to 30%. Mining myrgroestl... the temp ist around 28 degrees, so it should be fine. Well... my problem is, the fan is speeding up every few minutes (or seconds) and goes back to the 30%. This spin-up noise is really annoying and I cant see any reason why its doing so. Hahsrate and all is not affected. Its only the fan which spins up and down.

Somebody else have this behavior?
Ironeinstein
Jr. Member
*
Offline Offline

Activity: 56
Merit: 1


View Profile
December 15, 2017, 11:59:29 AM
 #81

I noticed this same issue at 30% fan speed. Doesn't happen at 20 or 50% fan.

Related question: is there a list of the sgminer options somewhere? Interested in using the auto fan control and temp cutoff, but the "gpu-xxx" options from the sgminer docs on GitHub don't seem to work.

Edit: looking for the custom baikal options for sgminer. The only two I've found are "baikal-fan" and "enable-nicehashsma"
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
December 16, 2017, 01:21:37 PM
 #82

@igotek

Hi, im mining with x10 for 4 days.
My results:
http://xvg-mg.idcray.com / https://dgb-groestl.theblocksfactory.com/   Best pools
zpool for quark/mygr/qubit/skein  bad
miningpoolhub  not bad
nicehash is down Sad
suprnova same as miningpoolhub - maybe a little bit better
I have few questions
When I set fan speed bellow 48%  Fan starts doing this - 30%.....1sec60%.......30%.......1sec60%. Every 10seconds fan goes to 60% for 1sec. Why ?
Temp is really good 20C, I wonder If its possible to overlock... ?

Use %25 fan speed on myriad groestl.
Use %50 fan speed on Quark or Qubit.

I saw the same problem on %30 - %40 fan speed.

Overclock isnt possible on Baikal X10 Miner.


@igotek

i like this thread, i need your guidance on two issues:-

1. Do you think this psu can run two giant x10s?
http://www.corsair.com/en-us/hxi-series-hx1200i-high-performance-atx-power-supply-1200-watt-80-plus-platinum-certified-psu

2. How and where can i modify fan speed as i am using skein only.

thank you.

If you dont use X11 algorithm, you can use this PSU. It should be OK.
You can modify fan speed on miner page of the Baikal GUI.

SGMINER OPTIONS
baikal-fan         25


Regarding PSU cables: You can use 6+2 pin PCI connectors.



Someone else have this issue:

I set the fan speed to 30%. Mining myrgroestl... the temp ist around 28 degrees, so it should be fine. Well... my problem is, the fan is speeding up every few minutes (or seconds) and goes back to the 30%. This spin-up noise is really annoying and I cant see any reason why its doing so. Hahsrate and all is not affected. Its only the fan which spins up and down.

Somebody else have this behavior?

Use %25 fan speed. It should be OK.
Dont use %30 fan speed. It is a problem. The fan cannot run at %30 fan speed correctly.


I noticed this same issue at 30% fan speed. Doesn't happen at 20 or 50% fan.

Related question: is there a list of the sgminer options somewhere? Interested in using the auto fan control and temp cutoff, but the "gpu-xxx" options from the sgminer docs on GitHub don't seem to work.

Edit: looking for the custom baikal options for sgminer. The only two I've found are "baikal-fan" and "enable-nicehashsma"

There is no any other options for Baikal miner on SGMINER.
The Baikal Miners work at 80 c without any problem.
Just be sure there is fresh air in the place where you use the miners.


I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
December 16, 2017, 01:32:07 PM
 #83

Hi,

I am pretty new in the mining world. From the Netherlands, so my English is a little poor perhaps.

This week we received 15 Baikal X10 miners. We already have L3's and Innosilicons running.
The interface for the Baikal is totally different, so i am having difficulty configuring that. But that is probably just practice and searching the internet. (however, tips are very welcome!)

But besides that, if have even a bigger problem. We now have 9 Baikals running. The other 6 i can't seem to find. I tried to look them up in Baikal scanner, and also in Advanced ip scanner, but no succes!

There is no reset buton on the miners. No sd slot. Only an USB slot and an other litte slot for some sort of connection cable. I read something about installing a new sd card image. Can i do this with usb aswell? There is no sd slot in the Baikal.

Again, 9 miners appeared perfectly when using ip scanner. But the other 6 are ghosts.....
I picked two of the ghost miners up and plugged them in at my own place, but also there they don't show up.

Does anyone have a solution for this problem? Please....

Francis



There is an SDCARD in the Baikal X10.
Just removethe cables and remove the screws.
You will see the OrangePi Zero.The SDCAD is located behind the CAT5 interface.
You cannot modify SDCARD image by using USB. USB is for the updating the MCU firmware for the boards.

-

Before doing anything, just power off the PSU and power ON it again.
You will find them on Baikal monitor. I use smart plugs to restart the Baikal miners.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Fran78
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
December 16, 2017, 08:15:58 PM
 #84


I rather not disassamble the miner because of the guarantee.
I tried to power on and off. Also switcht the power cords, but no success.
Have baikal monitor and also baikal scanner. On both they do not appear.
Lights on the baikal are blinking. Is there any other solution left, before
I have to contact the factory? I rather not sent them back for repair. I read
that this is a real time consuming problem.....

Fran78
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
December 17, 2017, 07:27:48 PM
 #85

update:

I changed my mind and took out the SD card. When connecting it to my computer, nothing happens. I do hear the 'pling', but
no screen opens and no extra directory appears. The sd card of one of the other machines however did open on my computer.
Only gave the message that he can't open the content, because it is a unknown file. This machine can be found on the computer,
but i can't get in the interface. I am now pretty sure that there is something wrong with the sd cards.

What can i do? Buy a few new sd cards. If i put the PiZero_GX10 file on there, downloaded from there website, will that maybe solve the problem?

Lafu
Legendary
*
Offline Offline

Activity: 3248
Merit: 3562



View Profile
December 17, 2017, 07:51:58 PM
 #86

update:

I changed my mind and took out the SD card. When connecting it to my computer, nothing happens. I do hear the 'pling', but
no screen opens and no extra directory appears. The sd card of one of the other machines however did open on my computer.
Only gave the message that he can't open the content, because it is a unknown file. This machine can be found on the computer,
but i can't get in the interface. I am now pretty sure that there is something wrong with the sd cards.

What can i do? Buy a few new sd cards. If i put the PiZero_GX10 file on there, downloaded from there website, will that maybe solve the problem?



Should be work because i done this a few times with my mini and my giant !!

Fran78
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
December 17, 2017, 07:58:35 PM
 #87

Thanks for your reply. I just tried to write the file to a (formatted) sd card , but i get error 5 in win32diskimager. Something about an error that occurs while writing data to the handle???

I tried to use another usb port. Als tried to use an other adapter for the sd card, but no luck still. Does anyone have any other suggestions?
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
December 17, 2017, 09:19:14 PM
 #88

update:

I changed my mind and took out the SD card. When connecting it to my computer, nothing happens. I do hear the 'pling', but
no screen opens and no extra directory appears. The sd card of one of the other machines however did open on my computer.
Only gave the message that he can't open the content, because it is a unknown file. This machine can be found on the computer,
but i can't get in the interface. I am now pretty sure that there is something wrong with the sd cards.

What can i do? Buy a few new sd cards. If i put the PiZero_GX10 file on there, downloaded from there website, will that maybe solve the problem?


when you insert the SDCARD to card read and pc, you will see a few file inside the SDCARD.
if you cannot see them:

SDCARD is corrupt or your card reader is out of order.

Try another SDCARD and check if you pc will see the files or not.


Thanks for your reply. I just tried to write the file to a (formatted) sd card , but i get error 5 in win32diskimager. Something about an error that occurs while writing data to the handle???

I tried to use another usb port. Als tried to use an other adapter for the sd card, but no luck still. Does anyone have any other suggestions?

use SDCARD FORMATTER software to format SDCARD.
then write the X10 image to SDCARD.
use 4 GB SDCARD. if your SDCARD is corrupt, win32disk software will show you error.
You must check SDCARD is OK or not and the same for card reader.
this problem is not related with Baikal. you must have some computer skills.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
Fran78
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
December 17, 2017, 09:43:24 PM
 #89

Thanks!

What i did: i first formatted the SD card with SD formatter. Then used diskpart to clean it intirely, using this tutorial https://www.[Suspicious link removed]s/www.windowscentral.com/how-clean-and-format-storage-drive-using-diskpart-windows-10%3famp

After that i could write the X10 file to the SD card succesfully. Put it in one of the baikals.....and tadaaaaa!! It's working again! Cheesy

Thanks for your help. Tomorrow i will do the same with the rest of the baikals and give an update when they are all on air.
maleemk
Sr. Member
****
Offline Offline

Activity: 304
Merit: 250



View Profile
December 17, 2017, 09:50:11 PM
 #90

I am getting my x10 miners pretty soon. I want to know that is daisy Chain 2-3 these miners in possible or not. Right now I have Daisy Chained my Baikal X2 miners in 3 each and they are working like a charm.



░░░░░░░░███████████████████████░░░
░░░░░░░░▀██░░░░░░░░░░░░░░░░░█▀
░░░░░░░░░▀█▄▄░░░░░░░░░░░░░░█▀
░░░░░░░░░░░░▀▀▀▀▀▄▄▄▄▄░░░░
░░░░░░░░░░░░░░░░░░░░░░▀▀▀▀█▄░░░░
░░░░░░░░░░░░█▄░░░░░░░░░░░░█▀
░░░░░░░░░░░░░█▄░░░░░░░░░░▄█
░░░░░░░░░░░░░░█▄░░░░░░░░▄█
░░░░░░░░░░░░░░░█▄░░░░░░▄█
░░░░░░░░░░░░░░░░█▄░░░░▄█
░░░░░░░░░░░░░░░░░█▄░░▄█
░░░░░░░░░░░░░░░░░▀██▀
░░░
░░░░░░░░░░░░░

tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
December 18, 2017, 09:54:25 AM
 #91

Thanks!

What i did: i first formatted the SD card with SD formatter. Then used diskpart to clean it intirely, using this tutorial https://www.[Suspicious link removed]s/www.windowscentral.com/how-clean-and-format-storage-drive-using-diskpart-windows-10%3famp

After that i could write the X10 file to the SD card succesfully. Put it in one of the baikals.....and tadaaaaa!! It's working again! Cheesy

Thanks for your help. Tomorrow i will do the same with the rest of the baikals and give an update when they are all on air.


great! when you formated sd card, which file allocation system did you use? fat32, ntfs or some other?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
Fran78
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
December 18, 2017, 12:52:34 PM
 #92

great! when you formated sd card, which file allocation system did you use? fat32, ntfs or some other?

NTFS. If you click the link in my previous post, you can see. Some of the defect cards i could directly
clean with diskpart, but some of them gave an error. These cards i first formatted with SD formatter,
and after that i could run diskpart without any error. I just formatted all the defect cards with succes.
Now installing the X10 file on the cards.

1 of the X10's is finally running perfectly now! Cheesy The others i will know in a few hours. Hope to have them all up
and running by then.
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
December 18, 2017, 11:11:27 PM
 #93

Thanks!

What i did: i first formatted the SD card with SD formatter. Then used diskpart to clean it intirely, using this tutorial https://www.[Suspicious link removed]s/www.windowscentral.com/how-clean-and-format-storage-drive-using-diskpart-windows-10%3famp

After that i could write the X10 file to the SD card succesfully. Put it in one of the baikals.....and tadaaaaa!! It's working again! Cheesy

Thanks for your help. Tomorrow i will do the same with the rest of the baikals and give an update when they are all on air.


You are welcome.

I am getting my x10 miners pretty soon. I want to know that is daisy Chain 2-3 these miners in possible or not. Right now I have Daisy Chained my Baikal X2 miners in 3 each and they are working like a charm.


it s not possible.

great! when you formated sd card, which file allocation system did you use? fat32, ntfs or some other?

I prefer fat32


I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
denax
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
December 19, 2017, 07:22:36 PM
Last edit: December 19, 2017, 08:44:12 PM by denax
 #94

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?
cashen
Sr. Member
****
Offline Offline

Activity: 434
Merit: 251


View Profile
December 20, 2017, 04:58:20 AM
 #95

I have 10 X10s

A couple issues i'm working through.

- Hash rate of miner is much less pool side
- Getting a "Miner down" error. It appears it is connected, but the miner is not started
- Boards sometimes stop working
- The units not currently working I'm getting a "Miner: 111 Connection Refused" error when I try to remotely reboot it.







slanislaw
Member
**
Offline Offline

Activity: 107
Merit: 11


View Profile
December 20, 2017, 05:03:07 AM
 #96

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.
denax
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
December 21, 2017, 12:55:03 PM
 #97

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!
mano237
Member
**
Offline Offline

Activity: 168
Merit: 10


View Profile
December 21, 2017, 04:15:33 PM
 #98

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

Because many switched over to mine Verge coin>more miner>higher hashrate>higher diff>less profit for all.
crytotronik
Member
**
Offline Offline

Activity: 147
Merit: 10


View Profile
December 21, 2017, 05:00:44 PM
 #99

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

I guess "different" should be "difficulty". I mined with VarDiff on idcray and the assigned diff was around 30-70. So the port for diff=50 should be fine. Maybe they added the 50 for Baikal X10 owners. All you have to do is to use port 10064 for a fixed difficulty at 50.
VasySir
Newbie
*
Offline Offline

Activity: 24
Merit: 0


View Profile
December 21, 2017, 05:11:27 PM
 #100

Verge how many times a day brings?
Jluyt123
Newbie
*
Offline Offline

Activity: 22
Merit: 0


View Profile
December 21, 2017, 05:25:26 PM
 #101

I want to double-check, what site did you guys order from, baikalminer.com?
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
December 21, 2017, 05:29:00 PM
 #102

I want to double-check, what site did you guys order from, baikalminer.com?

That's correct !

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
denax
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
December 21, 2017, 06:41:22 PM
 #103

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

I guess "different" should be "difficulty". I mined with VarDiff on idcray and the assigned diff was around 30-70. So the port for diff=50 should be fine. Maybe they added the 50 for Baikal X10 owners. All you have to do is to use port 10064 for a fixed difficulty at 50.

Okay did that but now my hashrate on idcray is around 6GH/s, even tho on my miner it still shows me 10GH/s. Is this right?
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
December 21, 2017, 07:32:19 PM
 #104

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

I guess "different" should be "difficulty". I mined with VarDiff on idcray and the assigned diff was around 30-70. So the port for diff=50 should be fine. Maybe they added the 50 for Baikal X10 owners. All you have to do is to use port 10064 for a fixed difficulty at 50.

but isn't better to mine on 10063 port with var diff and let pool set a diff for your miner?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
denax
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
December 25, 2017, 09:45:30 PM
 #105

Since idcray is down, which Pool do you guys recommend for digibyte? MiningPoolHub, BlacksFactory, or suprnova? (and maybe: why do you recommend that pool and not the others?)
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 27, 2017, 03:33:49 AM
 #106

I am a big fan of Baikal but the support is getting very slow, which i did not expected from Baikal.

Trying reinstall of software does not bring any change.

I hope they reply soon because every day i am loosing several hours of mining and BTC revenues.

It clearly seems like a Ethernet port or Orange pi issue, i hope they reply soon because it is really annoying to keep baby sitting a miner which is supposed to work 24/7 without interruptions.

bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 27, 2017, 12:27:14 PM
 #107

Any good pool of Verge Myriad Groestl?

Because the pool http://xvg-mg.idcray.com which previously lost some coins and denied to pay some of my coins which it lost just paying 500 coins for 24 hours where in it should be
769 coins.
http://whattomine.com/coins/218-xvg-myriad-groestl?utf8=%E2%9C%93&hr=10000&p=450.0&fee=0.0&cost=0.1&hcost=0.0&commit=Calculate

bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 27, 2017, 06:55:07 PM
 #108

Finally found XVG-Myriad pool, this one i know is a honest pool operator and not cheater like idcray.
Hope it works fine.  Cool
will let you know guys after test completes.
denax
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
December 27, 2017, 07:33:41 PM
 #109

Finally found XVG-Myriad pool, this one i know is a honest pool operator and not cheater like idcray.
Hope it works fine.  Cool
will let you know guys after test completes.

Name?
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 27, 2017, 07:57:54 PM
 #110

Here you go, it lookslike a stable pool, i know the owner he is honest and not cheater like idcray
http://s2.altcoinix.com/xvg/public/

 Cool lets mine XVG
denax
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
December 27, 2017, 08:06:41 PM
 #111

Here you go, it lookslike a stable pool, i know the owner he is honest and not cheater like idcray
http://s2.altcoinix.com/xvg/public/

 Cool lets mine XVG

Looks like a stable Pool? Its up for not even 1h. Probably your own pool or of one of your friends. There is nothing wrong with opeing own pool, but not to say it and to act like its already an esablished pool and call it "stable" after not even 1h uptime is shady to me. No thanks.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 27, 2017, 08:09:35 PM
 #112

Here you go, it lookslike a stable pool, i know the owner he is honest and not cheater like idcray
http://s2.altcoinix.com/xvg/public/

 Cool lets mine XVG

Looks like a stable Pool? Its up for not even 1h. Probably your own pool or of one of your friends. There is nothing wrong with opeing own pool, but not to say it and to act like its already an esablished pool and call it "stable" after not even 1h uptime is shady to me. No thanks.
neither myself own nor my friends. I mined x11 and scrypt on his pools those are stable and honestly pays
He setup because i told him idcray cheater and community needs a stable honest pool.

Its upto you to use or not  Smiley
but definitely worth a try
Fanno
Newbie
*
Offline Offline

Activity: 2
Merit: 0


View Profile
December 29, 2017, 02:57:04 PM
 #113

Hello Everyone,

I've received my niner yestersay and been fighting with it since then.

I performed the SD card erase and the uploaded the software.

Inserted the card, started the miner, and then everything was working fine until I've started to update the pools (Nicehash). Then the miner went offline and gave me this error 111.

Anyone has an idea?

Performed multiple resets by turning off miner with no help....

Thanks guys.
Ironeinstein
Jr. Member
*
Offline Offline

Activity: 56
Merit: 1


View Profile
December 30, 2017, 05:26:36 PM
Last edit: December 30, 2017, 06:02:13 PM by Ironeinstein
 #114

BLINKING BLUE LIGHT FIX

I may have just stumbled on a fix for the blinking blue light issue. I haven't had a problem with it until last night. I restored one of my miners' settings from a backup and forgot to change the username under the pool configs, so two of my machines were hashing on the same pool with the same username. Got the blinking blue light. Reset the machines to have different usernames and everything has been working fine. This was mining on idcray-xvg pool, haven't observed the issue with other pools.

Hope this helps someone!
-Iron

Tips:
LTC - LMP2zZQpgcb3HQk364vjSAgC1po5yYFQ2G

Update: just tried switching to MPH and got blinking blue on every machine. Checked the "Extranonce" box and did a power cycle, and so far, so good. Will post again if I continue to get errors on MPH.
miroslavo
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
December 31, 2017, 06:39:49 AM
 #115

Hi. Does anyone know how to set up baikal interface to mine XVG on idcray? I mean stratum server and what to write on user and password. Thanks
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 31, 2017, 07:27:33 AM
 #116

Hi. Does anyone know how to set up baikal interface to mine XVG on idcray? I mean stratum server and what to write on user and password. Thanks
Its simple
click "Help--> Getting Started"
you will find stratum servers
And under "Workers" you can create the username and password.
Hope it helps  Smiley
belaweb2
Full Member
***
Offline Offline

Activity: 490
Merit: 105


View Profile WWW
December 31, 2017, 07:16:44 PM
 #117

new XVG Verge Pool for X10 @0.5% fees  Cool Cool Cool

https://tiny-pool.com/

If you don't believe me or don't get it, I don't have time to try to convince you, sorry.
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
December 31, 2017, 07:18:44 PM
 #118

new XVG Verge Pool for X10 @0.5% fees  Cool Cool Cool

https://tiny-pool.com/
Good effort, but i personally prefer MPOS based pools as it gives idea of how much coins i am going to get  Smiley
valthonis
Newbie
*
Offline Offline

Activity: 11
Merit: 0


View Profile
December 31, 2017, 09:45:36 PM
 #119

I have 10 X10s

A couple issues i'm working through.

- Hash rate of miner is much less pool side
- Getting a "Miner down" error. It appears it is connected, but the miner is not started
- Boards sometimes stop working
- The units not currently working I'm getting a "Miner: 111 Connection Refused" error when I try to remotely reboot it.



https://i.imgur.com/JOTNnJr.png

https://i.imgur.com/Q8kJ0i3.png

https://i.imgur.com/BrcG55K.png

Have you had any luck with zpool? I haven't been able to get it working either. I'm currently on miningpoolhub.
ocminer
Legendary
*
Offline Offline

Activity: 2744
Merit: 1245



View Profile WWW
December 31, 2017, 09:58:02 PM
 #120

https://xvg-mg.suprnova.cc  for myriad-groestl

suprnova pools - reliable mining pools - #suprnova on freenet
https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
bitcoinexplorer
Sr. Member
****
Offline Offline

Activity: 420
Merit: 255



View Profile
January 01, 2018, 04:53:24 AM
 #121

https://xvg-mg.suprnova.cc  for myriad-groestl
That is great, so good to see a reputable pool launching in XVG.
miroslavo
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
January 01, 2018, 12:44:11 PM
 #122

Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?
momie
Member
**
Offline Offline

Activity: 84
Merit: 10


View Profile
January 01, 2018, 01:08:08 PM
 #123

if you interested to rent me your miner via mining rig rentals with the price that satisfy you , pm me.

DSgfaT2p5DgfWK8TEYS3NM3jKprTR9XB7c
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 01, 2018, 03:36:29 PM
 #124

Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?

Restart your miner.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
miroslavo
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
January 01, 2018, 04:41:21 PM
 #125

Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?

Restart your miner.
Ok. But are you sure?. If i do that and it will not help a will be not able to set up my miner without interface.
miroslavo
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
January 01, 2018, 05:03:19 PM
 #126

Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?

Restart your miner.
Ok. But are you sure?. If i do that and it will not help a will be not able to set up my miner without interface.
Everything works. Thanks a lot
mapr82
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
January 01, 2018, 05:32:57 PM
 #127

To all who have Problems with their Baikal X10:

I got one x10 from Batch2 a week ago and had severe problems with the miner. Allways got the error "Miner 111 Connection refused". Tried everything, different pools, configs, updated the Software several times,... no use. Baikal support not responding till now.

A few ours ago they uploaded a new software for the x10 on their site.
See: https://www.baikalminer.com/support04.php
Direkt Link: https://drive.google.com/drive/folders/1Guf6L8Zd6IXcmPHKxA_oTHo6p1QJovtU?usp=sharing

Download, Update, Everything works fine for me since a few hours... new record for my x10!
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 01, 2018, 07:27:13 PM
 #128

To all who have Problems with their Baikal X10:

I got one x10 from Batch2 a week ago and had severe problems with the miner. Allways got the error "Miner 111 Connection refused". Tried everything, different pools, configs, updated the Software several times,... no use. Baikal support not responding till now.

A few ours ago they uploaded a new software for the x10 on their site.
See: https://www.baikalminer.com/support04.php
Direkt Link: https://drive.google.com/drive/folders/1Guf6L8Zd6IXcmPHKxA_oTHo6p1QJovtU?usp=sharing

Download, Update, Everything works fine for me since a few hours... new record for my x10!

is there any new algo in this update ?

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
sumrack
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
January 01, 2018, 07:32:58 PM
 #129


Igo i noticed you have two "sick" miner as well shown on baikal monitor because of the lower hashrate.
One of my devices hashboard, BKLU ID:0 has only total 48 out of the 64 chips active, therefore also shown as "sick" because the total hashrate is only ~9.3 GH/s.

Any idea if this can be fixed or need to get replaced by baikal?
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 01, 2018, 07:44:10 PM
 #130

Igo i noticed you have two "sick" miner as well shown on baikal monitor because of the lower hashrate.
One of my devices hashboard, BKLU ID:0 has only total 48 out of the 64 chips active, therefore also shown as "sick" because the total hashrate is only ~9.3 GH/s.

Any idea if this can be fixed or need to get replaced by baikal?

You have to send it to Baikal.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
altcoinix
Member
**
Offline Offline

Activity: 334
Merit: 13


View Profile
January 03, 2018, 09:30:17 PM
 #131

We re online again all issues fixed

http://s2.altcoinix.com/xvg/public/

you need register
denax
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
January 04, 2018, 04:59:16 PM
 #132

We re online again all issues fixed

http://s2.altcoinix.com/xvg/public/

you need register

Stop posing your scam Pool. You took it down for some days and never payed the mined blocks out! Its scum like you who destroy this world.
miroslavo
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
January 05, 2018, 05:54:28 PM
 #133


Igo i noticed you have two "sick" miner as well shown on baikal monitor because of the lower hashrate.
One of my devices hashboard, BKLU ID:0 has only total 48 out of the 64 chips active, therefore also shown as "sick" because the total hashrate is only ~9.3 GH/s.

Any idea if this can be fixed or need to get replaced by baikal?
Someone had the same issue and it was due to nicehash 😀
https://www.facebook.com/groups/145674359425246/
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 05, 2018, 10:35:08 PM
 #134

We re online again all issues fixed

http://s2.altcoinix.com/xvg/public/

you need register

Stop posing your scam Pool. You took it down for some days and never payed the mined blocks out! Its scum like you who destroy this world.


I m using some of their pools without any problems or days.
They pay. not scam.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
January 06, 2018, 09:42:40 AM
 #135

Igotek,

what are realiable temps for chips and pi mining quark/qubit?

Thanks.

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
nokonokono
Newbie
*
Offline Offline

Activity: 25
Merit: 0


View Profile
January 06, 2018, 01:34:46 PM
 #136

Please give me some img of PiZero you can manage with NiceHash?
After updating to official version V1.1, it became Minerdown in NiceHash.
I am at a loss without moving, Please help me.
sumrack
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
January 06, 2018, 06:10:04 PM
 #137


Igo i noticed you have two "sick" miner as well shown on baikal monitor because of the lower hashrate.
One of my devices hashboard, BKLU ID:0 has only total 48 out of the 64 chips active, therefore also shown as "sick" because the total hashrate is only ~9.3 GH/s.

Any idea if this can be fixed or need to get replaced by baikal?
Someone had the same issue and it was due to nicehash 😀
https://www.facebook.com/groups/145674359425246/

i am not mining with nicehash on my x10 tho, also no FB acc..
saviothecnic
Full Member
***
Offline Offline

Activity: 235
Merit: 103


View Profile
January 13, 2018, 09:17:19 AM
 #138

Question but there is no option in baikal-fan
For the fan speed in automatic
to keep a selected temperature
It comes from factory to 100 very noisy for now I set to 30 and that's fine
but I would be safer if it would be possible to keep it automatically

Like Algorithm and Coin Pools now what you are using on the X10

Thank you
Cvijetin
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
January 15, 2018, 05:04:48 PM
 #139

Hello,
I need some help with my Baikal. It work and pool is ok (alive) but I don't have any hashrate on the pool!
See picture: http://www.bilder-upload.eu/show.php?file=e71ee3-1516035631.jpg

So I think something is wrong and my X10 don't want so send anything.
Any Idea?
Thanks
 
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 15, 2018, 06:12:25 PM
Last edit: January 16, 2018, 10:19:39 PM by igotek
 #140

Question but there is no option in baikal-fan
For the fan speed in automatic
to keep a selected temperature
It comes from factory to 100 very noisy for now I set to 30 and that's fine
but I would be safer if it would be possible to keep it automatically

Like Algorithm and Coin Pools now what you are using on the X10

Thank you

You can add a new option and write "baikal-fan" and put a value for fan. EG: 50

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
saviothecnic
Full Member
***
Offline Offline

Activity: 235
Merit: 103


View Profile
January 16, 2018, 09:03:43 AM
 #141

You can add a new option and write "baikal-fan" and put a value for fan. EG: 50
I received the second lot and I already had the baikal-fan option which was very noisy at 100 for now I set at 30
but I'm happy if it is possible to have the speed of the automatic fan
to keep a setpoint temperature but I do not know if this is possible
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 16, 2018, 10:19:14 PM
 #142

You can add a new option and write "baikal-fan" and put a value for fan. EG: 50
I received the second lot and I already had the baikal-fan option which was very noisy at 100 for now I set at 30
but I'm happy if it is possible to have the speed of the automatic fan
to keep a setpoint temperature but I do not know if this is possible

The automatic fan speed is not possible. You have to set it manually.
You can use 30 for myriad-groestl and skein. You can use 50 for quark and qubit.


I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 16, 2018, 10:23:05 PM
 #143

Igotek,

what are realiable temps for chips and pi mining quark/qubit?

Thanks.

Try to keep temps at 40 c and under it. But there is no problem if it is 60

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
January 17, 2018, 03:26:26 PM
 #144

Igotek,

what are realiable temps for chips and pi mining quark/qubit?

Thanks.

Try to keep temps at 40 c and under it. But there is no problem if it is 60

Thanks. My pi temperature is arround 46 - 50 C, but i think it is good temperature, right?

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
Supercoiner111
Full Member
***
Offline Offline

Activity: 490
Merit: 100


View Profile
January 18, 2018, 07:07:43 AM
 #145

Any new batch comin up for order any time soon?

craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
January 22, 2018, 02:06:30 AM
 #146

I have a hashrate finding regarding the X10.

Tested out mining on NiceHash QUARK the last couple of days.

My miner is in perfect condition, but typically my Baikal-Fan is set to 50. With this setting, I was only getting accepted speeds on NiceHash ranging from 5000-8000 for the entire 24 hours.

Once I set the fan speed back to 100, accepted speeds went back up to the expected 10,000.

Temps don't change much whatever the fan speed.

Anyone else experience similar?

I don't use Nicehash, but I don't experience a change in hash rate vs fan speed. My fan is at 50% and hash rate fluctuates between 6.5 and 13.5 reported; averages out between 9 and 10 over a longer period.

C.
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
January 22, 2018, 02:10:37 AM
 #147

Fan speed cannot change the hashrate power.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
senseless
Hero Member
*****
Offline Offline

Activity: 1118
Merit: 541



View Profile
January 22, 2018, 02:43:03 AM
 #148


Would anyone be willing to give me ssh access to their X10 so I can poke around (without altering any settings)?

I'm building a coin hopping pool server and I'd like to make a custom image for X10 miners so that it automatically switches between the most profitable algo. I'm also curious if by deciphering the code if I could potentially unlock the ability to multi-mine. The X10 miner should be able to mine say qubit and groestlcoin (GRS) at the same time. If they had placed a couple additional SHA engines it would be possible to mine almost all of these algo simultaneously.



dannysonfire
Newbie
*
Offline Offline

Activity: 21
Merit: 0


View Profile
January 22, 2018, 03:54:45 AM
 #149

Fan speed cannot change the hashrate power.

this. and if your running it 40 degrees+ then youre not doing it right. read the specs. the safe max temp is 40

i adjust fan speed all the time depending on the temp since i live in south florida but I never come off 10ghs + or - a little.
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
January 22, 2018, 07:25:05 AM
 #150

Fan speed cannot change the hashrate power.

this. and if your running it 40 degrees+ then youre not doing it right. read the specs. the safe max temp is 40

i adjust fan speed all the time depending on the temp since i live in south florida but I never come off 10ghs + or - a little.

as i understand, baikal states "operational temp 0 - 40 C" is ambient tenperature. Not chips itself.

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
craigh
Member
**
Offline Offline

Activity: 159
Merit: 10


View Profile
January 22, 2018, 03:03:58 PM
 #151

Fan speed cannot change the hashrate power.

this. and if your running it 40 degrees+ then youre not doing it right. read the specs. the safe max temp is 40

i adjust fan speed all the time depending on the temp since i live in south florida but I never come off 10ghs + or - a little.

I think we're talking about different things. My x10 never falls below 10.1gh on the baikal dashboard. I was talking about the hash rate reported from a mining pool.

C.
VasySir
Newbie
*
Offline Offline

Activity: 24
Merit: 0


View Profile
January 24, 2018, 05:17:18 PM
 #152

How much supernova now gives a verge a day?
wolverine5pl
Sr. Member
****
Offline Offline

Activity: 437
Merit: 250


View Profile
January 28, 2018, 09:59:40 AM
 #153

anyone knows when and what kind of algorithms baikal will add?
tomwrx
Member
**
Offline Offline

Activity: 224
Merit: 10


View Profile WWW
January 28, 2018, 12:21:35 PM
 #154

anyone knows when and what kind of algorithms baikal will add?

Most probably nist5 and groestl.

ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem.

https://alqo.app/
Pyccalo
Newbie
*
Offline Offline

Activity: 2
Merit: 0


View Profile
January 28, 2018, 03:59:50 PM
 #155

Hello,
I need some help with my Baikal. It work and pool is ok (alive) but I don't have any hashrate on the pool!
See picture: http://www.bilder-upload.eu/show.php?file=e71ee3-1516035631.jpg

So I think something is wrong and my X10 don't want so send anything.
Any Idea?
Thanks
 

I am having a similar issue.  My Baikal is connecting to the pools but no devices are running.  Also I only see red lights on the Baikal, no blue lights.  When I check with Baikal Monitor it shows this miner as 'sick'.  Anyone run into this?  Anyone have a fix?
neverm0re
Newbie
*
Offline Offline

Activity: 24
Merit: 0


View Profile
January 30, 2018, 11:20:43 PM
 #156

I have chips dead issue after 10 days of running, one board show only 49 chips instead of 64, any help?  Embarrassed

https://i.imgur.com/0vbhUkd.png
Crypto2Alt
Copper Member
Newbie
*
Offline Offline

Activity: 25
Merit: 0


View Profile
January 31, 2018, 09:17:07 AM
 #157

I have chips dead issue after 10 days of running, one board show only 49 chips instead of 64, any help?  Embarrassed


I had a similar issue of dead chips but power recycling fixed it - disconnect the power supply, wait until the fan stops, reconnect the power supply.
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
February 08, 2018, 01:48:16 AM
 #158

Hello,
I need some help with my Baikal. It work and pool is ok (alive) but I don't have any hashrate on the pool!
See picture: http://www.bilder-upload.eu/show.php?file=e71ee3-1516035631.jpg

So I think something is wrong and my X10 don't want so send anything.
Any Idea?
Thanks
 

I am having a similar issue.  My Baikal is connecting to the pools but no devices are running.  Also I only see red lights on the Baikal, no blue lights.  When I check with Baikal Monitor it shows this miner as 'sick'.  Anyone run into this?  Anyone have a fix?

You have to send it to the Baikal. They fixed two of my Baikal with only red light.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
excelerator
Member
**
Offline Offline

Activity: 97
Merit: 10


View Profile
February 10, 2018, 11:37:10 PM
Last edit: February 11, 2018, 03:10:51 AM by excelerator
 #159

Hello,
I need some help with my Baikal. It work and pool is ok (alive) but I don't have any hashrate on the pool!
See picture: http://www.bilder-upload.eu/show.php?file=e71ee3-1516035631.jpg

So I think something is wrong and my X10 don't want so send anything.
Any Idea?
Thanks
 

I am having a similar issue.  My Baikal is connecting to the pools but no devices are running.  Also I only see red lights on the Baikal, no blue lights.  When I check with Baikal Monitor it shows this miner as 'sick'.  Anyone run into this?  Anyone have a fix?

I had a new unit shipped that had this exact problem - red light, no blue or green lights.  Because I had multiple units I was able to isolate the problem by swapping both the SD card and the OPi with a functioning unit and determined it was a defective OPi unit as both controllers and all hash boards worked.  You'll need to contact Baikal to get a replacement OPi - no need to ship the unit back IF that's the problem.  It's way faster to have them send you an OPi than a round trip of the entire unit.

** NOTE ** OrangePis are not covered by Baikal's warranty so you have to pay for the new units
ritecoin
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
February 13, 2018, 05:02:14 AM
 #160

Does anyone have experience with the Baikal Monitor software that runs on windows? I have 20 x10's and none appear on when I run a scan, even though I can access them through the web interface just fine. I was not able to locate any documentation on the software so I'm not sure if there's a setting that must be enabled?

Thanks in advance for any advice.
Crypto2Alt
Copper Member
Newbie
*
Offline Offline

Activity: 25
Merit: 0


View Profile
February 13, 2018, 09:47:03 PM
 #161

Does anyone have experience with the Baikal Monitor software that runs on windows? I have 20 x10's and none appear on when I run a scan, even though I can access them through the web interface just fine. I was not able to locate any documentation on the software so I'm not sure if there's a setting that must be enabled?

Thanks in advance for any advice.
Perhaps you forgot to update the Start IP / End IP addresses to reflect your LAN settings (eg., 192.168.0.0 instead of 192.168.1.0) on the Scan window. Also, select Append option before you Start the scan.
Jgosai
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
March 11, 2018, 01:07:57 AM
 #162

I am having an issue with my X10’s. Apparently the miner keeps getting hijacked and other wallets inserted in place of mine.  I followed Baikal’s instructions for reset. It is set up so that only my IP can access. I have tried everything. Does anyone have any ideas of suggestions?  Has anyone experienced anything like this?
igotek (OP)
Hero Member
*****
Offline Offline

Activity: 2212
Merit: 613


Online Security & Investment Corporation


View Profile WWW
March 11, 2018, 10:49:21 PM
 #163

I am having an issue with my X10’s. Apparently the miner keeps getting hijacked and other wallets inserted in place of mine.  I followed Baikal’s instructions for reset. It is set up so that only my IP can access. I have tried everything. Does anyone have any ideas of suggestions?  Has anyone experienced anything like this?

-Change your static IP.
-Burn the newst Orange Pi image to SDCARD.
-Run your X10 with the new SDCARD.

I cannot live, I cannot die, trapped in myself.
Hold my breath as I wish for death. Oh please god, help me !
tof22
Newbie
*
Offline Offline

Activity: 12
Merit: 0


View Profile
April 11, 2018, 12:59:59 PM
 #164

hello , you can help me please and fix my baikalx10 for update new algo please
itlvk
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
May 02, 2018, 03:06:11 AM
 #165

hello , you can help me please and fix my baikalx10 for update new algo please
Do you want to fix ?
Marvell2
Full Member
***
Offline Offline

Activity: 1148
Merit: 132


View Profile
May 02, 2018, 05:26:01 AM
 #166

i had a fan go bad, I geuess the fan has a different 4 pin connector than s9 or d3 fans , anyone have a link to order replacement s?
Hoang Van Duong
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
May 11, 2018, 02:35:57 PM
 #167

I am having an issue with the Giant B, X10 core appear in Miner of Giant B
All red lights, not blue or green ones


Many thanks
wolverine5pl
Sr. Member
****
Offline Offline

Activity: 437
Merit: 250


View Profile
May 11, 2018, 02:43:19 PM
 #168

Just replaced orange pi and all goos but i get NO DEVICES RUNNING
mavaldin
Newbie
*
Offline Offline

Activity: 3
Merit: 0


View Profile
July 12, 2018, 07:20:47 AM
 #169

Hi.

i have 3 baikal x10, but i have one problem with them.

they are constantly reconnected to the network after 10 seconds of work, then the minutes of the asics do not respond to requests and again 10 seconds of operation

Red and Blue led lighting, Yellow flashing randomly

EnglishGentleman
Jr. Member
*
Offline Offline

Activity: 33
Merit: 1


View Profile
July 22, 2018, 08:41:59 PM
 #170


Would anyone be willing to give me ssh access to their X10 so I can poke around (without altering any settings)?

I'm building a coin hopping pool server and I'd like to make a custom image for X10 miners so that it automatically switches between the most profitable algo. I'm also curious if by deciphering the code if I could potentially unlock the ability to multi-mine. The X10 miner should be able to mine say qubit and groestlcoin (GRS) at the same time. If they had placed a couple additional SHA engines it would be possible to mine almost all of these algo simultaneously.




Hi -We spoke by phone about BCU1525 and I bought one. Changing subjects, did you ever build your own coin hopping pool server for Baikal X10 and mentioned in this BitcointTalk post? If so, is it possible for me to mine to it please? Is there a benefit? Thanks
Pages: 1 2 3 4 5 6 7 8 9 [All]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!