[ANN] Bitfury ASIC sales in EU and Europe

[spiccioli]

Hello,

I just ordered a full kit yesturday (Order #1180) and the bank transfert had just been confirmed today. Anyone could give me an idea of how long it will take to be delivered in Paris, France (knowing that i also paid for the express delivery option)?

Thx!

We don't currently sell full kits. We sell H-cards and M-boards. Your hashrate may vary. Each card has been tested to deliver 25GH individually. Full rigs will be made available later, but will be priced higher due to the extra time it takes to set them up for the advertised hashrate.

punin,

do you think new h-boards will have a substantially lower price ?

spiccioli

[hdbuck]

Hello,

I just ordered a full kit yesturday (Order #1180) and the bank transfert had just been confirmed today. Anyone could give me an idea of how long it will take to be delivered in Paris, France (knowing that i also paid for the express delivery option)?

Thx!

We don't currently sell full kits. We sell H-cards and M-boards. Your hashrate may vary. Each card has been tested to deliver 25GH individually. Full rigs will be made available later, but will be priced higher due to the extra time it takes to set them up for the advertised hashrate.

Although I am aware they are sold separately since i paid quite an expensive price for it, I meant by "full kit" all the necessary items to start mining (16 h-cards + 1 M-board + 1 raspberry pi). But yes technically it is not sold as full rigs.. but i am having my bitkit anyway!

[punin]

Hello,

I just ordered a full kit yesturday (Order #1180) and the bank transfert had just been confirmed today. Anyone could give me an idea of how long it will take to be delivered in Paris, France (knowing that i also paid for the express delivery option)?

Thx!

We don't currently sell full kits. We sell H-cards and M-boards. Your hashrate may vary. Each card has been tested to deliver 25GH individually. Full rigs will be made available later, but will be priced higher due to the extra time it takes to set them up for the advertised hashrate.

punin,

do you think new h-boards will have a substantially lower price ?

spiccioli

I don't expect the price to be substantially lower. (I don't have the price yet)

[Micky25]

For the Yay:

one, I hope not too stupid question: can I just rip these little brown thingamajigs off the august h-boards, or is it counterproductive? If yes, how do I do it best?

[Micky25]

oh how I'd like to see my order #119x switch into "processing" or "shipped" 

[klondike_bar]

For the Yay:

one, I hope not too stupid question: can I just rip these little brown thingamajigs off the august h-boards, or is it counterproductive? If yes, how do I do it best?

its doable, but its not really worth it IMO. youll save a few measly watts and maybe a bit of heat, at the cost of labor time and risk of screwing with a working system. Bitfury did it for both the above reasons, as well as to save the costs of parts/assembly for several dozen capacitors per board (likely a few dollars each pcb)

[Micky25]

thanks for your answer, but if I got it right, BFSB removed them manually and for a reason. I see the same(?) boards, which came without these "parts" performing much better, than the ones with.

[klondike_bar]

thanks for your answer, but if I got it right, BFSB removed them manually and for a reason. I see the same(?) boards, which came without these "parts" performing much better, than the ones with.

perhaps. i imagine you might get the extra headroom for 1-2GH at most. for me, its not worth the work/risk, but im sure you could manually remove without issue.

my feeling though is that they manually removed the caps on a few boards to test the theory, then simply changed the assembly instructions to omit them.

[punin]

For the Yay:

one, I hope not too stupid question: can I just rip these little brown thingamajigs off the august h-boards, or is it counterproductive? If yes, how do I do it best?

August caps should be ok. If you want to remove them I recommend a hot-air station with temp set to max 340°C. They come off pretty easily with tweezers. We were doing 16 cards per hour.

[punin]

For the Yay:

one, I hope not too stupid question: can I just rip these little brown thingamajigs off the august h-boards, or is it counterproductive? If yes, how do I do it best?

its doable, but its not really worth it IMO. youll save a few measly watts and maybe a bit of heat, at the cost of labor time and risk of screwing with a working system. Bitfury did it for both the above reasons, as well as to save the costs of parts/assembly for several dozen capacitors per board (likely a few dollars each pcb)

Bitfury has nothing to do with these boards.

[klondike_bar]

For the Yay:

one, I hope not too stupid question: can I just rip these little brown thingamajigs off the august h-boards, or is it counterproductive? If yes, how do I do it best?

its doable, but its not really worth it IMO. youll save a few measly watts and maybe a bit of heat, at the cost of labor time and risk of screwing with a working system. Bitfury did it for both the above reasons, as well as to save the costs of parts/assembly for several dozen capacitors per board (likely a few dollars each pcb)

Bitfury has nothing to do with these boards.

my apologies - I was generalising the change being implemented by both BFSB and MBP

[hdbuck]

hello,

I am starting to be worried as i still did not received any confirmation mail allowing me to track the package. I did the SEPA transfert 2 days ago now and still nothing

[server]

Don't worry.

Maybe it's because they changed from UPS to DHL.

[GandalfG]

Today I receive confirmation from admin with DHL tracking nbr, than from BFSB status change to complete.
I pay SEPA yesterday. Today status change from on hold to processing. Thats means money land in Niko pocked. I additionally send from my bank transaction confirmation to Punin.
Order nbr 117x

[darkfriend77]

Today I receive confirmation from admin with DHL tracking nbr, than from BFSB status change to complete.
I pay SEPA yesterday. Today status change from on hold to processing. Thats means money land in Niko pocked. I additionally send from my bank transaction confirmation to Punin.
Order nbr 117x

And where is your order now?

Wednesday, November 06, 2013 at 14:58
Origin Service Area:  TURKU - KEMIO - FINLAND

[GandalfG]

Today I receive confirmation from admin with DHL tracking nbr, than from BFSB status change to complete.
I pay SEPA yesterday. Today status change from on hold to processing. Thats means money land in Niko pocked. I additionally send from my bank transaction confirmation to Punin.
Order nbr 117x

And where is your order now?

Wednesday, November 06, 2013 at 14:58
Origin Service Area:  TURKU - KEMIO - FINLAND

3    Departed Facility in TURKU - FINLAND    TURKU - FINLAND    18:33    
 
2    Processed at TURKU - FINLAND    TURKU - FINLAND    17:54    
 
1    Shipment information received    TURKU - FINLAND    15:26

[BBQKorv]

For the Yay:

Pics were here...

one, I hope not too stupid question: can I just rip these little brown thingamajigs off the august h-boards, or is it counterproductive? If yes, how do I do it best?

August caps should be ok. If you want to remove them I recommend a hot-air station with temp set to max 340°C. They come off pretty easily with tweezers. We were doing 16 cards per hour.

I did that to two August cards, it's easy with two soldering irons if you don't happen to have hot-tweezers or hot-air station. 1-2GHs is what I think I gained.

[darkfriend77]

Today I receive confirmation from admin with DHL tracking nbr, than from BFSB status change to complete.
I pay SEPA yesterday. Today status change from on hold to processing. Thats means money land in Niko pocked. I additionally send from my bank transaction confirmation to Punin.
Order nbr 117x

And where is your order now?

Wednesday, November 06, 2013 at 14:58
Origin Service Area:  TURKU - KEMIO - FINLAND

3    Departed Facility in TURKU - FINLAND    TURKU - FINLAND    18:33    
2    Processed at TURKU - FINLAND    TURKU - FINLAND    17:54    
1    Shipment information received    TURKU - FINLAND    15:26

Looks good ... for you ... my paket still isn't picked up ... sitting in TURKU since yesterday .. not beeing tracked by DHL ... still on

Wednesday, November 06, 2013 at 14:58
1   Shipment information received    TURKU - FINLAND   14:58

nothing more ...

[Micky25]

night flight to Germany, ready for boarding.

4    Arrived at Sort Facility HELSINKI - FINLAND    HELSINKI - FINLAND    20:31

[darkfriend77]

night flight to Germany, ready for boarding.

4    Arrived at Sort Facility HELSINKI - FINLAND    HELSINKI - FINLAND    20:31

Your order probably got also ... registered today right?