miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 11:49:12 AM |
|
hi guys anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration: i3 4gb win10 claymore 10 amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
|
|
|
|
AsicGuy
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 12:11:05 PM |
|
24mhs seems normal as the dag is going up,
did you mean 24mhs for the 2 ?
You can check for the bios and oc at 1stminingrig
|
|
|
|
RealSwissMiner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 12:34:55 PM |
|
hi guys anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration: i3 4gb win10 claymore 10 amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
What clocks are you running on the GPU? That kind of power consumption seems way of and way above 100% PL for two of them. Nothing else eating up electricity? How hot are the GPUs? Just for your reference my rig with 6x RX 570 is consuming 530W off the wall with cryptonight and 720W for dagger.
|
|
|
|
0xcosmos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 12:57:30 PM |
|
hi guys anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration: i3 4gb win10 claymore 10 amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
ddu your drivers and install blockchain drivers. search for modified bios from google flash the modified bios, run ati patcher insert -cvddc 875 in bat file in claymore miner run memory clock at 2100 in msi ab for 30 mh/s
|
|
|
|
tg88
Legendary
Offline
Activity: 2492
Merit: 1431
Payment Gateway Allows Recurring Payments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 01:02:40 PM |
|
24mhs seems normal as the dag is going up,
did you mean 24mhs for the 2 ?
You can check for the bios and oc at 1stminingrig
The DAG problem has already been solved, just use the blockchain driver. It yields from 29 to 30 mhs.
|
|
|
|
miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 01:30:56 PM |
|
thank you guys for all answers! really ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) in this moment i'm using a mod bios from anorak.tech specific for my Rx 570 4gb (113-2E366FU-053) power safe with msi ab: mv -93 core clock 900 memory clock 2100 fan 55% temp. 41c ethereum mhs 19 solo mode and a rx570 8gb (113-2E366AU-X56) also modded mv -93 core clock 900 memory clock 2100 fan 55% temp. 41c ethereum mhs 19 solo mode 800watt at the wall for only 38 mhs now i ddu all drivers and try AMD blockchain driver (latest 23th august right?) after this i try -cvddc 875 in bat
|
|
|
|
miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 01:41:53 PM |
|
hi guys anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration: i3 4gb win10 claymore 10 amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
What clocks are you running on the GPU? That kind of power consumption seems way of and way above 100% PL for two of them. Nothing else eating up electricity? How hot are the GPUs? Just for your reference my rig with 6x RX 570 is consuming 530W off the wall with cryptonight and 720W for dagger. hi core clock 900 memory 2100 temperature 45c and Nothing else use electricity thank you!
|
|
|
|
miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 02:19:18 PM |
|
hi guys anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration: i3 4gb win10 claymore 10 amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
ddu your drivers and install blockchain drivers. search for modified bios from google flash the modified bios, run ati patcher insert -cvddc 875 in bat file in claymore miner run memory clock at 2100 in msi ab for 30 mh/s with amd blockchain driver my 4gb rx up to 30mhs thank you.. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) last question... can you send me you claymore mining string? i tried -cvddc 875 but mining stops with error thanks again ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
jmigdlc99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 02:54:02 PM |
|
Don't start at -cvvdc 875. All cards are different and yours may not be capable of going to core voltages that low. You could try with -cvddc 900 and then if it doesn't crash, slowly start lowering in increments of -5.
|
0xacBBa937A57ecE1298B5d350f40C0Eb16eC5fA4B
|
|
|
RoyaLunique
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 383
Merit: 272
Legend is back.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 03:59:50 PM |
|
Don't start at -cvvdc 875. All cards are different and yours may not be capable of going to core voltages that low. You could try with -cvddc 900 and then if it doesn't crash, slowly start lowering in increments of -5.
I agree .
|
|
|
|
sindikat
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 04:21:36 PM |
|
hi guys anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration: i3 4gb win10 claymore 10 amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
What clocks are you running on the GPU? That kind of power consumption seems way of and way above 100% PL for two of them. Nothing else eating up electricity? How hot are the GPUs? Just for your reference my rig with 6x RX 570 is consuming 530W off the wall with cryptonight and 720W for dagger. You are right. I have 6 GPU consumes 800 watts in dual mode mining. Even without the additional setting one GPU consumes about 150-180 watts. Where OP took about 800 watts I don't understand. It is unreal. I think that the OP has no towers. He had heard this information and not understood. Around mining a lot of fakes.
|
|
|
|
MiningDoc
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2017, 04:36:12 PM Last edit: December 05, 2017, 04:48:54 PM by MiningDoc |
|
I have MSI Armor Oc rx570's with 4gb Elpida Memory. I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's. You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1268 core, 1750 mem, 87-88w @ the wall.
|
|
|
|
miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2017, 10:15:45 AM |
|
I have MSI Armor Oc rx570's with 4gb Elpida Memory. I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's. You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1268 core, 1750 mem, 87-88w @ the wall. thank you! yesterday my watt-o-meter at wall go down, so now i don't know the real wattage. But i take your good example and i'll try new configuration with the new amd blockchain driver now i get 80mhs for 3 gpu. next step optimize power consumption thank you again
|
|
|
|
miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2017, 11:04:00 AM |
|
I have MSI Armor Oc rx570's with 4gb Elpida Memory. I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's. You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1268 core, 1750 mem, 87-88w @ the wall. i found all item in polaris except the undervolted.. where do you set it? thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
mini miner
Newbie
Offline
Activity: 60
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2017, 01:49:31 PM |
|
thank you guys for all answers! really ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) in this moment i'm using a mod bios from anorak.tech specific for my Rx 570 4gb (113-2E366FU-053) power safe with msi ab: mv -93 core clock 900 memory clock 2100 fan 55% temp. 41c ethereum mhs 19 solo mode and a rx570 8gb (113-2E366AU-X56) also modded mv -93 core clock 900 memory clock 2100 fan 55% temp. 41c ethereum mhs 19 solo mode 800watt at the wall for only 38 mhs now i ddu all drivers and try AMD blockchain driver (latest 23th august right?) after this i try -cvddc 875 in bat hie, does power limit make sense anything by making powlim +10
|
|
|
|
miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 09:19:01 PM |
|
i think something wrong my rig get at wall 480watt for a while, then the consumption grow up to 950watt in 2 day so i flash bios with same rom and consumption back to 550 and again and again why?! ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) maybe psu not efficient? (i'm using old psu for now) i don't understand.. please
|
|
|
|
miningdigitalcurrency (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2017, 01:22:33 PM |
|
rx 570 has 8pin connector and a 6pin connector, did you connect both? maybe i have to connect only 8 pin to reduce wattage?
i'm searching for info but google do not help me.
thank you guys
|
|
|
|
cronnin
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 12:51:20 AM |
|
You must connect all the power connectors you have on the graphics card.
|
|
|
|
RealSwissMiner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 07:35:48 AM |
|
You must connect all the power connectors you have on the graphics card.
Thats not correct, my Sapphire RX 570 4gb run just fine with 8 pol power conmector no need for the additional 6 pol branch.
|
|
|
|
|