Jimmy2011
|
|
July 11, 2013, 03:22:58 PM |
|
I am running release 5 on my mac air i5 windows system. There are 8 active connections, but there are only 2 blocks synchronized after half an hour, so what's the matter?
|
|
|
|
Zalfrin
|
|
July 11, 2013, 03:25:56 PM |
|
I am running release 5 on my mac air i5 windows system. There are 8 active connections, but there are only 2 blocks synchronized after half an hour, so what's the matter?
You can try restarting the client, or here are some nodes you can try adding:  [ { "addr" : "107.20.106.184:60473", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 63288, "bytesrecv" : 36507, "conntime" : 1373555320, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 13993, "banscore" : 0, "syncnode" : true }, { "addr" : "98.219.165.39:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 25598, "bytesrecv" : 75762, "conntime" : 1373555322, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13993, "banscore" : 0 }, { "addr" : "54.213.28.70:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 36559, "bytesrecv" : 68788, "conntime" : 1373555334, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13993, "banscore" : 0 }, { "addr" : "192.241.214.21:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 22688, "bytesrecv" : 56760, "conntime" : 1373555340, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13993, "banscore" : 0 }, { "addr" : "24.10.168.55:9911", "services" : "00000001", "lastsend" : 1373556296, "lastrecv" : 1373556327, "bytessent" : 30046, "bytesrecv" : 68261, "conntime" : 1373555352, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "108.61.83.36:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 17895, "bytesrecv" : 105600, "conntime" : 1373555352, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "54.227.32.16:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 15863, "bytesrecv" : 95758, "conntime" : 1373555353, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "54.226.7.107:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 31277, "bytesrecv" : 77355, "conntime" : 1373555360, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "72.46.156.122:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 33140, "bytesrecv" : 72157, "conntime" : 1373555372, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13996, "banscore" : 0 }, { "addr" : "65.29.242.236:51193", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 55446, "bytesrecv" : 5329, "conntime" : 1373555934, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 14052, "banscore" : 0 }, { "addr" : "69.157.140.80:61385", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556297, "bytessent" : 47121, "bytesrecv" : 1008, "conntime" : 1373556190, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 14070, "banscore" : 0 }, { "addr" : "184.58.176.59:54330", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 47836, "bytesrecv" : 953, "conntime" : 1373556217, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 14071, "banscore" : 0 } ]
|
|
|
|
dudeguy
Member
Offline
Activity: 182
Merit: 10
|
|
July 11, 2013, 03:27:33 PM |
|
I am running release 5 on my mac air i5 windows system. There are 8 active connections, but there are only 2 blocks synchronized after half an hour, so what's the matter?
i5 mobile processors are MUCH different from i5 desktop processors For instance there are ivy bridge i7s that have very similar constructions to Desktop i5s. The numbers mean shit all. It's all a marketing ploy. People who buy laptops don't want to think they are getting a less powerful product--especially Macbook Pro/Macbook Air buyers. I would try the Generic RELEASE 8 x86-64
|
|
|
|
captainfuture
|
|
July 11, 2013, 03:27:47 PM |
|
i nned release 5 for mac dont wanna run a vm
|
|
|
|
kcanup
Legendary
Offline
Activity: 1484
Merit: 1000
|
|
July 11, 2013, 03:31:07 PM |
|
Do gpus mine this coin yet? does cgminer works?
|
|
|
|
Zalfrin
|
|
July 11, 2013, 03:31:40 PM |
|
i nned release 5 for mac dont wanna run a vm Sorry, I know nothing about macs. Best I can offer is I linked my github codebase earlier, you can use that to build yourself.
|
|
|
|
Zalfrin
|
|
July 11, 2013, 03:32:42 PM |
|
Do gpus mine this coin yet? does cgminer works?
No. No. cgminer undestands sha and scrypt, not this new prime-based proof-of-work (yet).
|
|
|
|
Jimmy2011
|
|
July 11, 2013, 03:33:59 PM |
|
I am running release 5 on my mac air i5 windows system. There are 8 active connections, but there are only 2 blocks synchronized after half an hour, so what's the matter?
You can try restarting the client, or here are some nodes you can try adding:  [ { "addr" : "107.20.106.184:60473", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 63288, "bytesrecv" : 36507, "conntime" : 1373555320, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 13993, "banscore" : 0, "syncnode" : true }, { "addr" : "98.219.165.39:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 25598, "bytesrecv" : 75762, "conntime" : 1373555322, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13993, "banscore" : 0 }, { "addr" : "54.213.28.70:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 36559, "bytesrecv" : 68788, "conntime" : 1373555334, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13993, "banscore" : 0 }, { "addr" : "192.241.214.21:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 22688, "bytesrecv" : 56760, "conntime" : 1373555340, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13993, "banscore" : 0 }, { "addr" : "24.10.168.55:9911", "services" : "00000001", "lastsend" : 1373556296, "lastrecv" : 1373556327, "bytessent" : 30046, "bytesrecv" : 68261, "conntime" : 1373555352, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "108.61.83.36:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 17895, "bytesrecv" : 105600, "conntime" : 1373555352, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "54.227.32.16:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 15863, "bytesrecv" : 95758, "conntime" : 1373555353, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "54.226.7.107:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 31277, "bytesrecv" : 77355, "conntime" : 1373555360, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13994, "banscore" : 0 }, { "addr" : "72.46.156.122:9911", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 33140, "bytesrecv" : 72157, "conntime" : 1373555372, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : false, "startingheight" : 13996, "banscore" : 0 }, { "addr" : "65.29.242.236:51193", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 55446, "bytesrecv" : 5329, "conntime" : 1373555934, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 14052, "banscore" : 0 }, { "addr" : "69.157.140.80:61385", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556297, "bytessent" : 47121, "bytesrecv" : 1008, "conntime" : 1373556190, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 14070, "banscore" : 0 }, { "addr" : "184.58.176.59:54330", "services" : "00000001", "lastsend" : 1373556327, "lastrecv" : 1373556327, "bytessent" : 47836, "bytesrecv" : 953, "conntime" : 1373556217, "version" : 70001, "subver" : "/Satoshi:0.8.3/", "inbound" : true, "startingheight" : 14071, "banscore" : 0 } ] Thanks. Should I add the port number? For example, "addnode 65.29.242.236:51193 add" or "addnode 65.29.242.236 add" ? I started to mine though it's not synchronized, and I got 450 pps. I am so luck that I got a block in 2 minutes. So is it an orphan block?
|
|
|
|
kcanup
Legendary
Offline
Activity: 1484
Merit: 1000
|
|
July 11, 2013, 03:35:45 PM |
|
Do gpus mine this coin yet? does cgminer works?
No. No. cgminer undestands sha and scrypt, not this new prime-based proof-of-work (yet). Oh cool.. any program out there to mine with cpu/gpu? I have asus board and amd radeon 7970. Thanks. And i have windows 7, 64-bit installed.
|
|
|
|
Zalfrin
|
|
July 11, 2013, 03:36:31 PM |
|
Thanks.
Should I add the port number? For example, "addnode 65.29.242.236:51193 add" or "addnode 65.29.242.236 add" ?
I started to mine though it's not synchronized, and I got 450 pps. I am so luck that I got a block in 2 minutes. So is it an orphan block?
If your blockchain isn't synchronized, then yeah probably an orphan. I haven't used addnode before, but your second example should be right, from the console window.
|
|
|
|
Zalfrin
|
|
July 11, 2013, 03:37:46 PM |
|
Do gpus mine this coin yet? does cgminer works?
No. No. cgminer undestands sha and scrypt, not this new prime-based proof-of-work (yet). Oh cool.. any program out there to mine with cpu/gpu? I have asus board and amd radeon 7970. Thanks. Mining is CPU only right now, via the qt client. There are lots of builds in this thread that you can try out. Which one is best / is going to work, depends on your CPU type.
|
|
|
|
itod
Legendary
Offline
Activity: 1974
Merit: 1077
^ Will code for Bitcoins
|
|
July 11, 2013, 03:38:49 PM |
|
This is my build, I used -O2 -march=native, I'm running a FX 8350, it gives me ~1250 PPS on that. I placed all the dlls in the rar. Please do your virus check and everything, I compiled that on a VM but still take precautions running a file made by another person. https://www.dropbox.com/s/6hycwi0i4dzwu1i/Primecoin.rarWov, this thing flies. On my i3 four cores @3Ghz now have 350-400 primespersec! Original 0.1.0 client has around 50, version 5 from last nigh around 150, and now at least 350 with your version. If it is really that fast and not some error, I would mine a few blocks tonight. Will let you know. Thanks, Zalfrin!
|
|
|
|
fabrizziop
|
|
July 11, 2013, 03:41:08 PM |
|
This is my build, I used -O2 -march=native, I'm running a FX 8350, it gives me ~1250 PPS on that. I placed all the dlls in the rar. Please do your virus check and everything, I compiled that on a VM but still take precautions running a file made by another person. https://www.dropbox.com/s/6hycwi0i4dzwu1i/Primecoin.rarWov, this thing flies. On my i3 four cores @3Ghz now have 350-400 primespersec! Original 0.1.0 client has around 50, version 5 from last nigh around 150, and now at least 350 with your version. If it is really that fast and not some error, I would mine a few blocks tonight. Will let you know. Thanks, Zalfrin! What CPU do you exactly have?. To try to make a better build, after all it's experience to me.
|
|
|
|
kcanup
Legendary
Offline
Activity: 1484
Merit: 1000
|
|
July 11, 2013, 03:42:36 PM |
|
Do gpus mine this coin yet? does cgminer works?
No. No. cgminer undestands sha and scrypt, not this new prime-based proof-of-work (yet). Oh cool.. any program out there to mine with cpu/gpu? I have asus board and amd radeon 7970. Thanks. Mining is CPU only right now, via the qt client. There are lots of builds in this thread that you can try out. Which one is best / is going to work, depends on your CPU type. Actually because of lack of enough information about this coin, i tried cgminer with my gpu to mine with qt client, and it generates hash and getgenerate was true so i thought it worked, so that means its not going to find a block this way right?
|
|
|
|
Zalfrin
|
|
July 11, 2013, 03:45:16 PM |
|
Actually because of lack of enough information about this coin, i tried cgminer with my gpu to mine with qt client, and it generates hash and getgenerate was true so i thought it worked, so that means its not going to find a block this way right?
Correct. Someone earlier made that mistake too. cgminer will hash, but primecoind will reject all your shares from it since they're not actually primes. You may find a block from the qt setgenerate, but your GPU isn't going to be doing anything for you.
|
|
|
|
kcanup
Legendary
Offline
Activity: 1484
Merit: 1000
|
|
July 11, 2013, 03:47:27 PM |
|
Correct. Someone earlier made that mistake too. cgminer will hash, but primecoind will reject all your shares from it since they're not actually primes. You may find a block from the qt setgenerate, but your GPU isn't going to be doing anything for you.
ahh thanks. I will give it a try with my cpu then. Cheers.
|
|
|
|
gateway
|
|
July 11, 2013, 03:48:57 PM |
|
Now do you mine on several machines with one address or ?
|
|
|
|
Zalfrin
|
|
July 11, 2013, 03:52:18 PM |
|
Now do you mine on several machines with one address or ?
With solo mining like we're doing here, a new address gets created for every minted block. You can import/export private keys to consolidate all XPMs into a single wallet.
|
|
|
|
altsay
|
|
July 11, 2013, 03:56:33 PM |
|
I get compilation error. This is the make file command: make CXXFLAGS="-O3 -march=native" -j6 -f makefile.unix and this is the error. g++: internal compiler error: Killed (program cc1plus) What's the solution?
|
|
|
|
Sondey10mg
|
|
July 11, 2013, 03:57:43 PM |
|
I get compilation error. This is the make file command: make CXXFLAGS="-O3 -march=native" -j6 -f makefile.unix and this is the error. g++: internal compiler error: Killed (program cc1plus) What's the solution? Not enough memory. Make a swapfile or remove the '-O2' from the makefile
|
*Image Removed* *Image Removed*
|
|
|
|