CPU Mines more than GPU

[stylonius]

Mining Software: WinMiner v1.101

CPU: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz

Operating System: Windows 10 Pro 64-bit (10.0, Build 10586) (10586.th2_release.170728-1941)
                 Language: English (Regional Setting: English)
      System Manufacturer: System manufacturer
             System Model: System Product Name
                     BIOS: 2104
                Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (4 CPUs), ~3.4GHz
                   Memory: 8192MB RAM
      Available OS Memory: 8136MB RAM
                Page File: 3544MB used, 5871MB available
              Windows Dir: C:\Windows
          DirectX Version: 12
      DX Setup Parameters: Not found
         User DPI Setting: Using System DPI
       System DPI Setting: 96 DPI (100 percent)
          DWM DPI Scaling: Disabled
                 Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported

GPU: NVIDIA GeForce GTX 650

Card name: NVIDIA GeForce GTX 650
       Manufacturer: NVIDIA
          Chip type: GeForce GTX 650
           DAC type: Integrated RAMDAC
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_10DE&DEV_0FC6&SUBSYS_84281043&REV_A1
     Display Memory: 5063 MB
   Dedicated Memory: 995 MB
      Shared Memory: 4068 MB
       Current Mode: 1920 x 1080 (32 bit) (60Hz)

When mining ETN, my CPU has about 150h/s while my GPU only gets about 20h/s.
What is/are the factor/s that makes my CPU mine more than my GPU?

-Thanks in advance for replies. Mining newbie here.

[1715106257]

1715106257

[1715106257]

1715106257

[Arvydas77]

Mining Software: WinMiner v1.101

CPU: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz

Operating System: Windows 10 Pro 64-bit (10.0, Build 10586) (10586.th2_release.170728-1941)
                 Language: English (Regional Setting: English)
      System Manufacturer: System manufacturer
             System Model: System Product Name
                     BIOS: 2104
                Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (4 CPUs), ~3.4GHz
                   Memory: 8192MB RAM
      Available OS Memory: 8136MB RAM
                Page File: 3544MB used, 5871MB available
              Windows Dir: C:\Windows
          DirectX Version: 12
      DX Setup Parameters: Not found
         User DPI Setting: Using System DPI
       System DPI Setting: 96 DPI (100 percent)
          DWM DPI Scaling: Disabled
                 Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported

GPU: NVIDIA GeForce GTX 650

Card name: NVIDIA GeForce GTX 650
       Manufacturer: NVIDIA
          Chip type: GeForce GTX 650
           DAC type: Integrated RAMDAC
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_10DE&DEV_0FC6&SUBSYS_84281043&REV_A1
     Display Memory: 5063 MB
   Dedicated Memory: 995 MB
      Shared Memory: 4068 MB
       Current Mode: 1920 x 1080 (32 bit) (60Hz)

When mining ETN, my CPU has about 150h/s while my GPU only gets about 20h/s.
What is/are the factor/s that makes my CPU mine more than my GPU?

-Thanks in advance for replies. Mining newbie here.

I think it depends on coin but GPU was always more profitable than CPU mining. It is kind of strange thing.

[jackjackfly]

I'm joining the person before me. GPU actually should be more profitable, it looks kinda strange for me. Might you try another coin to check the stats? If the situation is the same...well, actually not sure about that

[Undefined31415]

This isn't a surprising result.

The GTX 650 is a weak GPU, by today's standards. On top of that, Nvidia's GPUs were not competitive options for mining until the 10-series was released, and perhaps the GTX 9xx series.

Cryptonight is also not an algorithm that Nvidia GPUs (especially older ones) are especially great for, in general.

The CPU is a mid-range ivy bridge processor, which is old, but still not too shabby. (Do note that for the past few years, GPU performance gains have {arguably} been quite a bit greater than those on the CPU side.)

Lastly, cryptonight is designed to keep CPUs reasonably competitive. While the rumor that mobile/laptop CPU-mining ETN would be feasible was largely BS, cryptonight coins remain an option for CPU mining.

[pizzacrypto]

The GPU is very old and slow. Don´t expect anything from it. You should get a new one if you want to do mining, minimum gtx1060 or rx570

[mansurinaeem]

Mining Software: WinMiner v1.101

CPU: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz

Operating System: Windows 10 Pro 64-bit (10.0, Build 10586) (10586.th2_release.170728-1941)
                 Language: English (Regional Setting: English)
      System Manufacturer: System manufacturer
             System Model: System Product Name
                     BIOS: 2104
                Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (4 CPUs), ~3.4GHz
                   Memory: 8192MB RAM
      Available OS Memory: 8136MB RAM
                Page File: 3544MB used, 5871MB available
              Windows Dir: C:\Windows
          DirectX Version: 12
      DX Setup Parameters: Not found
         User DPI Setting: Using System DPI
       System DPI Setting: 96 DPI (100 percent)
          DWM DPI Scaling: Disabled
                 Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported

GPU: NVIDIA GeForce GTX 650

Card name: NVIDIA GeForce GTX 650
       Manufacturer: NVIDIA
          Chip type: GeForce GTX 650
           DAC type: Integrated RAMDAC
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_10DE&DEV_0FC6&SUBSYS_84281043&REV_A1
     Display Memory: 5063 MB
   Dedicated Memory: 995 MB
      Shared Memory: 4068 MB
       Current Mode: 1920 x 1080 (32 bit) (60Hz)

When mining ETN, my CPU has about 150h/s while my GPU only gets about 20h/s.
What is/are the factor/s that makes my CPU mine more than my GPU?

-Thanks in advance for replies. Mining newbie here.

Upgrade your Graphics card to get more hashes per second.

[stylonius]

This isn't a surprising result.

The GTX 650 is a weak GPU, by today's standards. On top of that, Nvidia's GPUs were not competitive options for mining until the 10-series was released, and perhaps the GTX 9xx series.

Cryptonight is also not an algorithm that Nvidia GPUs (especially older ones) are especially great for, in general.

The CPU is a mid-range ivy bridge processor, which is old, but still not too shabby. (Do note that for the past few years, GPU performance gains have {arguably} been quite a bit greater than those on the CPU side.)

Lastly, cryptonight is designed to keep CPUs reasonably competitive. While the rumor that mobile/laptop CPU-mining ETN would be feasible was largely BS, cryptonight coins remain an option for CPU mining.

The GPU is very old and slow. Don´t expect anything from it. You should get a new one if you want to do mining, minimum gtx1060 or rx570

I see. Thank you for your replies. I am thinking about getting GTX 1050 Ti, considering the electricity bill here in the PH. PH Miners would say GTX 1050 Ti would be the most profitable regarding with Price, electricity bill.

Would you agree on getting GTX 1050 Ti GPU instead?

[abudfv2008]

Why not to compare gtx560 with Pentium or some Sempron?

[alesandro_777]

not representative compare, some old GPu with new CPU

[ikicha]

Old GPU vs New CPU, its not fair bro
ETN is cryptonight algorihm, and cryptonight algo is good for CPU mining

[rh154c0d3]

well, i think it's because your gpu has "Dedicated Memory: 995 MB". I think if dedicated memory of your gpu is 4gb then it'll so much better. cmiiw, i'm just newbie here. 

[QuintLeo]

You are using VERY outdated software - try running Stak-XMR or Cast instead.
That card should be cabable of more like 200 to perhaps 300 ballpark.

 1050 ti won't be a lot higher hashrate, but it WILL soak a lot less power.