parsa_f (OP)
Newbie
 Offline
Activity: 3
Merit: 0
|
 |
March 12, 2018, 02:29:02 PM
Last edit: March 12, 2018, 08:27:18 PM by -ck |
|
Hi, I received my t9+ from vitamin 2/3 weeks ago but when it came it didn't seem right, it would make a really loud noise then just over heat in about a minute and restart and it would just continue to do that without showing any data so i sent that to Bitmain. Today i received my ant miner s9 from bitmain and i am experiencing a similar issue, however after hours of playing with it iv finally got it to mine however every 2/3 minutes the temp would hit 80 and it would restart. Anyone can help me out? Kernel log: [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000313] ps7-ttc #0 at df804000, irq=43
[ 0.000619] Console: colour dummy device 80x30
[ 0.000650] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040448] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042580] CPU: Testing write buffer coherency: ok
[ 0.042916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042975] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043203] L310 cache controller enabled
[ 0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210364] Brought up 2 CPUs
[ 0.210383] SMP: Total of 2 processors activated.
[ 0.210391] CPU: All CPU(s) started in SVC mode.
[ 0.211084] devtmpfs: initialized
[ 0.213482] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214699] regulator-dummy: no parameters
[ 0.222376] NET: Registered protocol family 16
[ 0.224665] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226967] cpuidle: using governor ladder
[ 0.226980] cpuidle: using governor menu
[ 0.234426] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235953] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235967] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.236081] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257888] bio: create slab <bio-0> at 0
[ 0.259320] vgaarb: loaded
[ 0.260049] SCSI subsystem initialized
[ 0.261059] usbcore: registered new interface driver usbfs
[ 0.261243] usbcore: registered new interface driver hub
[ 0.261474] usbcore: registered new device driver usb
[ 0.262001] media: Linux media interface: v0.10
[ 0.262160] Linux video capture interface: v2.00
[ 0.262401] pps_core: LinuxPPS API ver. 1 registered
[ 0.262413] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262537] PTP clock support registered
[ 0.262898] EDAC MC: Ver: 3.0.0
[ 0.263957] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266824] DMA-API: preallocated 4096 debug entries
[ 0.266839] DMA-API: debugging enabled by kernel config
[ 0.266914] Switched to clocksource arm_global_timer
[ 0.287798] NET: Registered protocol family 2
[ 0.288458] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288515] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288600] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288653] TCP: reno registered
[ 0.288670] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288702] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288937] NET: Registered protocol family 1
[ 0.289276] RPC: Registered named UNIX socket transport module.
[ 0.289288] RPC: Registered udp transport module.
[ 0.289297] RPC: Registered tcp transport module.
[ 0.289305] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289318] PCI: CLS 0 bytes, default 64
[ 0.289752] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291775] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293857] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.294066] msgmni has been set to 967
[ 0.294850] io scheduler noop registered
[ 0.294863] io scheduler deadline registered
[ 0.294905] io scheduler cfq registered (default)
[ 0.302799] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.302820] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.425009] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.993281] console [ttyPS0] enabled
[ 0.997567] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.005179] [drm] Initialized drm 1.1.0 20060810
[ 1.022219] brd: module loaded
[ 1.031567] loop: module loaded
[ 1.040812] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.046558] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.054611] libphy: XEMACPS mii bus: probed
[ 1.059164] ------------- phy_id = 0x3625e62
[ 1.063906] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.072841] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079526] ehci-pci: EHCI PCI platform driver
[ 1.086741] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.093585] usbcore: registered new interface driver usb-storage
[ 1.100528] mousedev: PS/2 mouse device common for all mice
[ 1.106633] i2c /dev entries driver
[ 1.113576] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.119114] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.124994] Xilinx Zynq CpuIdle Driver started
[ 1.129879] sdhci: Secure Digital Host Controller Interface driver
[ 1.135971] sdhci: Copyright(c) Pierre Ossman
[ 1.140339] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.147189] mmc0: no vqmmc regulator found
[ 1.151199] mmc0: no vmmc regulator found
[ 1.186934] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.195617] usbcore: registered new interface driver usbhid
[ 1.201130] usbhid: USB HID core driver
[ 1.205836] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.212135] nand: Micron MT29F2G08ABAEAWP
[ 1.216099] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.222040] Bad block table found at page 131008, version 0x01
[ 1.228269] Bad block table found at page 130944, version 0x01
[ 1.234319] 3 ofpart partitions found on MTD device pl353-nand
[ 1.240100] Creating 3 MTD partitions on "pl353-nand":
[ 1.245189] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.253237] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.260544] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.269501] TCP: cubic registered
[ 1.272737] NET: Registered protocol family 17
[ 1.277451] Registering SWP/SWPB emulation handler
[ 1.283313] regulator-dummy: disabling
[ 1.287669] UBI: attaching mtd1 to ubi0
[ 1.815325] UBI: scanning is finished
[ 1.827031] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.834089] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.840887] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.847568] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.854399] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.860411] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.867523] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1283732989
[ 1.876534] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.885767] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.885772] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.889706] ALSA device list:
[ 1.889710] No soundcards found.
[ 1.906126] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.935162] UBIFS: recovery needed
[ 2.080797] UBIFS: recovery completed
[ 2.084476] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.090425] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.099530] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.109419] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.114449] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.125747] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.132937] devtmpfs: mounted
[ 2.136043] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.972880] random: dd urandom read with 0 bits of entropy available
[ 3.366939]
[ 3.366939] bcm54xx_config_init
[ 3.976960]
[ 3.976960] bcm54xx_config_init
[ 7.977782] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.983892] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.621199] In axi fpga driver!
[ 22.624266] request_mem_region OK!
[ 22.627689] AXI fpga dev virtual address is 0xdf9fc000
[ 22.632765] *base_vir_addr = 0x8c510
[ 22.648296] In fpga mem driver!
[ 22.651367] request_mem_region OK!
[ 22.654928] fpga mem virtual address is 0xe2000000
[ 23.446961]
[ 23.446961] bcm54xx_config_init
[ 24.076933]
[ 24.076933] bcm54xx_config_init
[ 28.077938] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.084045] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 694.357481] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 81246dca18c0881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[26] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[50] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[4] has core num=2
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[39] has core num=1
Chain[7] ASIC[40] has core num=15
Chain[7] ASIC[41] has core num=15
Chain[7] ASIC[43] has core num=15
Chain[7] ASIC[51] has core num=6
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=91 on chain[6], value=890
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,-68,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1377 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1613 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81246dca18c0881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=910
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=57 value=910
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[26] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[50] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[4] has core num=2
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[39] has core num=1
Chain[J8] ASIC[40] has core num=15
Chain[J8] ASIC[41] has core num=15
Chain[J8] ASIC[43] has core num=15
Chain[J8] ASIC[51] has core num=6
miner total rate=13575GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-68
Chain:7 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:7 max freq=687
Chain:7 min freq=687
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-68
Chain:7 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Detect a bad chip=40 on chain[7], fixed to 400M
Asic[40]:687
Detect a bad chip=41 on chain[7], fixed to 400M
Asic[41]:687 Asic[42]:687 Detect a bad chip=43 on chain[7], fixed to 400M
Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:7 max freq=687
Chain:7 min freq=687
max freq = 687
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:40 remote:-127 offset:-58, will fixed offset=27
New offset Chain[5] chip[244] local:40 remote:-127 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:37 remote:-77 offset:-111, will fixed offset=27
New offset Chain[6] chip[244] local:37 remote:-77 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset=62,-68,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-68 typeID=1a
Warning: Chain[7] chip[244] local:38 remote:-83 offset:-104, will fixed offset=27
New offset Chain[7] chip[244] local:38 remote:-83 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
single board rate=4351 voltage limit=910 on chain[5]
get PIC voltage=910 on chain[5], check: must be < 910
retryFlag=1 will set the voltage limited on chain[5], change voltage=910
now set pic voltage=57 on chain[5]
single board rate=4531 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
retryFlag=1 will set the voltage limited on chain[6], change voltage=890
now set pic voltage=91 on chain[6]
single board rate=4692 voltage limit=870 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 870
retryFlag=1 will set the voltage limited on chain[7], change voltage=870
now set pic voltage=125 on chain[7]
Chain[J6] set working voltage=910 [57]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24885
last_nonce_num:17275
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25853
last_nonce_num:55783
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=896 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=911
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=905 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=741 asic[27]=910 asic[28]=912 asic[29]=744 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=909 asic[39]=912
asic[40]=906 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=904
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=790 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[04]=896
core[001]=7 core[032]=7 core[033]=7 core[050]=7 core[051]=7 core[056]=7 core[057]=7 core[058]=6 core[066]=7 core[069]=7 core[073]=7 core[078]=7 core[088]=7 core[094]=7 core[104]=7
asic[15]=911
core[110]=7
asic[19]=905
core[001]=6 core[003]=7 core[017]=6 core[022]=7 core[058]=7
asic[26]=741
core[001]=5 core[034]=0 core[035]=1 core[036]=0 core[037]=1 core[038]=1 core[039]=1 core[040]=1 core[041]=1 core[042]=1 core[043]=1 core[044]=1 core[045]=1 core[046]=1 core[047]=1 core[048]=1 core[049]=0 core[050]=1 core[051]=1 core[052]=1 core[053]=1 core[054]=1 core[055]=1 core[056]=0 core[062]=7 core[086]=7 core[111]=7
asic[27]=910
core[108]=6
asic[29]=744
core[068]=3 core[069]=7 core[070]=7 core[071]=7 core[072]=7 core[073]=7 core[074]=7 core[075]=7 core[076]=7 core[077]=7 core[078]=7 core[079]=7 core[080]=7 core[081]=7 core[082]=7 core[083]=7 core[084]=7 core[085]=7 core[086]=7 core[087]=7 core[088]=7 core[089]=7 core[092]=7 core[093]=7 core[094]=7 core[095]=7 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=1 core[102]=0 core[103]=1 core[104]=1 core[105]=1 core[106]=1 core[107]=1 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[38]=909
core[060]=5
asic[40]=906
core[037]=2
asic[47]=904
core[060]=6 core[106]=5 core[107]=7 core[109]=7 core[112]=7
asic[51]=790
core[016]=7 core[018]=5 core[019]=6 core[021]=7 core[022]=7 core[026]=6 core[027]=7 core[028]=7 core[030]=7 core[031]=7 core[032]=7 core[033]=7 core[034]=7 core[035]=7 core[037]=7 core[038]=7 core[039]=7 core[040]=6 core[041]=7 core[042]=6 core[043]=7 core[044]=7 core[045]=7 core[046]=6 core[048]=7 core[049]=7 core[050]=7 core[051]=7 core[052]=7 core[053]=7 core[055]=7 core[058]=6 core[060]=6 core[062]=4 core[064]=7 core[068]=7 core[072]=4 core[074]=7 core[075]=7 core[077]=7 core[078]=7 core[079]=6 core[080]=6 core[081]=7 core[082]=6 core[083]=6 core[084]=3 core[085]=6 core[086]=7 core[087]=6 core[088]=6 core[089]=6 core[090]=6 core[091]=6 core[092]=6 core[093]=6 core[094]=7 core[095]=6 core[096]=6 core[097]=6 core[098]=6 core[099]=7 core[100]=6 core[101]=6 core[102]=6 core[103]=6 core[104]=6 core[105]=7 core[106]=6 core[107]=6 core[108]=7 core[109]=7 core[110]=7 core[111]=6 core[112]=4 core[113]=7
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:56952
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27313
last_nonce_num:15040
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24882
last_nonce_num:27918
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25858
last_nonce_num:27921
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=903 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=728 asic[27]=912 asic[28]=912 asic[29]=768 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=906 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=895 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[04]=903
core[000]=7 core[002]=7 core[024]=7 core[032]=7 core[033]=7 core[047]=7 core[056]=7 core[069]=7 core[071]=7
asic[26]=728
core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0
asic[29]=768
core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[40]=906
core[037]=2
asic[51]=895
core[062]=5 core[084]=1 core[112]=1
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:57096
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:54017
last_nonce_num:45787
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=393 total_tv_end_sys=394
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.1110 Asic[02]=61.7400 Asic[03]=69.6590 Asic[04]=69.3900 Asic[05]=72.4440 Asic[06]=67.4770 Asic[07]=67.9980 Asic[08]=65.8670
Asic[09]=66.6050 Asic[10]=71.4200 Asic[11]=68.1490 Asic[12]=71.3700 Asic[13]=70.0610 Asic[14]=66.5040 Asic[15]=72.2930 Asic[16]=71.6550
Asic[17]=76.2690 Asic[18]=68.2320 Asic[19]=71.2690 Asic[20]=63.2160 Asic[21]=70.1950 Asic[22]=68.3500 Asic[23]=72.2590 Asic[24]=71.5040
Asic[25]=71.4540 Asic[26]=66.4370 Asic[27]=61.7230 Asic[28]=68.6020 Asic[29]=68.2660 Asic[30]=70.8660 Asic[31]=68.6520 Asic[32]=64.4240
Asic[33]=67.9140 Asic[34]=71.1010 Asic[35]=68.1990 Asic[36]=66.4880 Asic[37]=67.4940 Asic[38]=69.4240 Asic[39]=70.3130 Asic[40]=69.9270
Asic[41]=68.3500 Asic[42]=70.5140 Asic[43]=64.6760 Asic[44]=70.6150 Asic[45]=63.3670 Asic[46]=68.6020 Asic[47]=65.4140 Asic[48]=67.2260
Asic[49]=67.9140 Asic[50]=71.1010 Asic[51]=70.3630 Asic[52]=68.8530 Asic[53]=69.6420 Asic[54]=72.9640 Asic[55]=68.4510 Asic[56]=69.9600
Asic[57]=68.1990 Asic[58]=65.3300 Asic[59]=66.3030 Asic[60]=71.2020 Asic[61]=62.4440 Asic[62]=65.4470 Asic[63]=64.8940
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=72.3930 Asic[02]=70.5140 Asic[03]=77.0240 Asic[04]=73.8860 Asic[05]=72.7620 Asic[06]=69.2060 Asic[07]=74.6750 Asic[08]=74.5070
Asic[09]=70.2620 Asic[10]=71.8730 Asic[11]=67.6620 Asic[12]=77.1080 Asic[13]=73.8860 Asic[14]=68.1650 Asic[15]=71.7560 Asic[16]=68.4840
Asic[17]=70.0950 Asic[18]=68.8530 Asic[19]=67.9140 Asic[20]=71.3530 Asic[21]=70.1450 Asic[22]=69.5410 Asic[23]=70.7660 Asic[24]=66.5550
Asic[25]=70.3630 Asic[26]=65.2130 Asic[27]=70.2620 Asic[28]=73.9030 Asic[29]=72.6280 Asic[30]=75.2620 Asic[31]=74.3390 Asic[32]=67.1420
Asic[33]=74.5410 Asic[34]=71.9910 Asic[35]=77.6610 Asic[36]=70.5310 Asic[37]=70.6480 Asic[38]=67.9810 Asic[39]=72.6450 Asic[40]=64.3740
Asic[41]=75.4130 Asic[42]=71.5540 Asic[43]=70.7830 Asic[44]=77.7120 Asic[45]=67.8130 Asic[46]=64.6420 Asic[47]=69.7090 Asic[48]=78.1480
Asic[49]=68.4170 Asic[50]=69.0380 Asic[51]=66.7060 Asic[52]=72.3760 Asic[53]=72.1420 Asic[54]=76.7380 Asic[55]=73.1310 Asic[56]=71.9230
Asic[57]=65.5980 Asic[58]=70.3630 Asic[59]=79.3890 Asic[60]=76.7550 Asic[61]=70.0280 Asic[62]=68.0980 Asic[63]=65.0110
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=84.5060 Asic[02]=79.6240 Asic[03]=72.4770 Asic[04]=74.6410 Asic[05]=80.2620 Asic[06]=80.6140 Asic[07]=76.1180 Asic[08]=81.0840
Asic[09]=76.1510 Asic[10]=80.3290 Asic[11]=78.5670 Asic[12]=78.2320 Asic[13]=79.9930 Asic[14]=78.0810 Asic[15]=79.4400 Asic[16]=80.2780
Asic[17]=78.6340 Asic[18]=77.5940 Asic[19]=81.8720 Asic[20]=74.9270 Asic[21]=83.2980 Asic[22]=81.3020 Asic[23]=79.3050 Asic[24]=73.8860
Asic[25]=78.6340 Asic[26]=79.4060 Asic[27]=63.4010 Asic[28]=72.4100 Asic[29]=78.9200 Asic[30]=64.9780 Asic[31]=81.4860 Asic[32]=73.8700
Asic[33]=74.5740 Asic[34]=82.4260 Asic[35]=71.6720 Asic[36]=77.3930 Asic[37]=77.3260 Asic[38]=73.5510 Asic[39]=82.9130 Asic[40]=77.4430
Asic[41]=44.1910 Asic[42]=50.3310 Asic[43]=80.2280 Asic[44]=45.7010 Asic[45]=78.6010 Asic[46]=74.7590 Asic[47]=85.4290 Asic[48]=77.5610
Asic[49]=78.4330 Asic[50]=80.0440 Asic[51]=75.5310 Asic[52]=68.8530 Asic[53]=79.8930 Asic[54]=75.2450 Asic[55]=76.8060 Asic[56]=77.0740
Asic[57]=79.1380 Asic[58]=81.3350 Asic[59]=73.7020 Asic[60]=83.0470 Asic[61]=77.5100 Asic[62]=79.4230 Asic[63]=74.2550
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=1a middle offset=27
Chain[5] Chip[62] local Temp=64
read failed on Chain[5] Chip[62] middle Temp old value:79
Special fix Chain[5] Chip[62] middle Temp = 79
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=1a middle offset=27
Chain[6] Chip[62] local Temp=61
read failed on Chain[6] Chip[62] middle Temp old value:76
Special fix Chain[6] Chip[62] middle Temp = 76
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=1a middle offset=27
Chain[7] Chip[62] local Temp=61
read failed on Chain[7] Chip[62] middle Temp old value:75
Special fix Chain[7] Chip[62] middle Temp = 76
Done read temp on Chain[7]
set FAN speed according to: temp_highest=64 temp_top1[PWM_T]=64 temp_top1[TEMP_POS_LOCAL]=64 temp_change=0 fix_fan_steps=0
FAN PWM: 78
read_temp_func Done!
CRC error counter=0
---------------- Have tried a lot of things such as rebooting and resetting, haven't tried flashing firmware again, so if anyone can help me i would really appreciate it. |
