PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Malefol7]

hi, I'm new to the forum, I run a pool with core-geth 1.11.19, and I run 5.3b but I get incorrect shares, why?
amd 20.4.x on ETC
https://cominers.org/screen.png

2020.12.09:12:06:25.890: main Eth speed: 321.051 MH/s, shares: 0/0/0, time: 0:00
2020.12.09:12:06:25.890: main GPUs: 1: 25.072 MH/s (0) 2: 26.711 MH/s (0) 3: 26.734 MH/s (0) 4: 26.728 MH/s (0) 5: 25.577 MH/s (0) 6: 25.558 MH/s (0) 7: 25.524 MH/s (0) 8: 23.264 MH/s (0) 9: 23.210 MH/s (0) 10: 23.124 MH/s (0) 11: 23.217 MH/s (0) 12: 23.202 MH/s (0) 13: 23.131 MH/s (0)
2020.12.09:12:06:27.899: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":false}

[UPDATE]
I don't know if this can help developers, we retried version 5.2e, shares are now accepted node version 1.11.19 and 20.4.xx on ETC

[batsonxl]

@ Mr.Phoenix i know you are busy, you promised add straps for polaris cards, waiting,,,,,, thanks

[ManuBBXX]

PhoenixMiner suddenly stopped working after I updated the nvidia drivers to version 460.79

It seems 460.79 is not good driver:
https://www.nicehash.com/blog/post/psa-do-not-update-to-nvidia-geforce-460-79-drivers

Can confirm I also installed the latest nvidida driver, it posts gpus then immediately exits program.

I hope miner will be updated for this issue, cause I can't living without playing Cyberpunk, and for this I need THIS driver
And when I'm not playing, I mine too on this PC (even if poor 3060TI)

[vx0713]

I can also confirm that after updating to latest nVidia drivers 460.79 my 3080 stopped working with Phoenix Miner 5.3B

[SCMining]

I can also confirm that after updating to latest nVidia drivers 460.79 my 3080 stopped working with Phoenix Miner 5.3B

[vx0713]

Ok, it seems that T-Rex miner is also dead with the new nVidia drivers, but I tested lolminer and for now at least it seems that it works.

So until Phoenix miner gets updated, you either downgrade your drivers or switch to lolminer

[bluspirit]

@ Mr.Phoenix i know you are busy, you promised add straps for polaris cards, waiting,,,,,, thanks

Yes. It would be great to be able to use the raw strap string (96 characters) with "-straps" option for polaris cards. 

[Semtex72]

Ok, it seems that T-Rex miner is also dead with the new nVidia drivers, but I tested lolminer and for now at least it seems that it works.

So until Phoenix miner gets updated, you either downgrade your drivers or switch to lolminer

Not getting any good hash with 3070 or 3060 TI with lolminer

[pedja1]

PhoenixMiner suddenly stopped working after I updated the nvidia drivers to version 460.79

It seems 460.79 is not good driver:
https://www.nicehash.com/blog/post/psa-do-not-update-to-nvidia-geforce-460-79-drivers

Can confirm I also installed the latest nvidida driver, it posts gpus then immediately exits program.

I hope miner will be updated for this issue, cause I can't living without playing Cyberpunk, and for this I need THIS driver
And when I'm not playing, I mine too on this PC (even if poor 3060TI)

Same here, in the meantime nbminer works fine, similar hashrate, no problems for now

[1qaz]

Hello !

What may be the problem ?

Os Windows 10 x64

Unable to establish secure connection to ssl://eth.2miners.com:12020: certificate verify failed

[ManuBBXX]

Ok guys, on my MSI 3060TI, I can do 61 mhs at 55% PL, 130W, fan 30%, 52 degrees
- 502 core, +1200 mem

Wonderful GPU..

[Vampire_sumy]

Hi, i've been using phoenix miner for a long time with my amd cards, but now i decided to move my nvidia cards (1070ti, 1080 and 1080ti) also to phoenix miner. This is not a ploblem at all, but after testing i see that phoenix miner shows less hashrate then claymore or t-rex for example. Could you please change timings for you strap2 parameter maximally closer to claymore's strap2 timings ? Or even better to make your strap2 similar to --mt 3 by t-rex (slightly better than claymore's strap2). I know that you have (and claymore too) strap3, but the memory on 90% of my cards can't work with strap3 timings, but absolutely stable on strap2 (t-rex mt3). I would be very gratefull for your help.

[Deafran]

hai all ...

recently, my amd 4gb gpu, went down 2 mh each of them,
in every rig, amd gpu rig

it is just me, or u got the same
pls enlight with ur 4gb amd gpu status ...

thx ...

[abdulmad]

Ok guys, on my MSI 3060TI, I can do 61 mhs at 55% PL, 130W, fan 30%, 52 degrees
- 502 core, +1200 mem

Wonderful GPU..

May I ask which MSI card this is ? Ventus or the Trio ?

[ManuBBXX]

Ok guys, on my MSI 3060TI, I can do 61 mhs at 55% PL, 130W, fan 30%, 52 degrees
- 502 core, +1200 mem

Wonderful GPU..

May I ask which MSI card this is ? Ventus or the Trio ?

Trio X

[Cafa]

Friends, can anyone help me connect Phoenixminer to Sparkpool?

I'm connecting to eth-eu.sparkpool.com:3333 and that part is ok. But I don't know the syntax to use to connect my worker and attribute the mining profits to me.

My worker name is sp_workername

Should I add sp_workername.1234 or just the bare name? In the docs it says:

Config Address and RigID
Format: Sub-account/address+ / +rigID. For example: sp_workername.1234

Should I add my Ethereum wallet address anywhere, or just the worker name?

Full syntax please 

[bit-sokol]

Friends, can anyone help me connect Phoenixminer to Sparkpool?

I'm connecting to eth-eu.sparkpool.com:3333 and that part is ok. But I don't know the syntax to use to connect my worker and attribute the mining profits to me.

My worker name is sp_workername

Should I add sp_workername.1234 or just the bare name? In the docs it says:

Config Address and RigID
Format: Sub-account/address+ / +rigID. For example: sp_workername.1234

Should I add my Ethereum wallet address anywhere, or just the worker name?

Full syntax please 

PhoenixMiner.exe -pool eu.sparkpool.com:3333 -wal 0x2f6f1f2b63939df9b65d0193faa8f255488a3b12 -worker Phoenix -epsw x -tt 79 -tstop 89 -fanmin 30 -coin eth
pause

[drag0nrono]

I have a problem (it might be just the size of the VRAM, but I want to make sure).
I start the latest PhoenixMiner with the regular parameter (just wallet, pool, worker name and rvsize to -1).
It works for some minutes at quite high hashrate - about 30 MH/s at about 106W power.
After those minutes (vary from 5 to 15), it drops to 15 MH/s and the power drops to 88W.

The card is an RX570 with 4 GB of RAM.
Is this due to the DAG size?
Did anyone see this behavior before?

yes my friend it is DAG unfortunatly. you can test same setting etc to see your speed.

Roger that! Thanks for the fast reply!
On another topic - anyone using RX6800XT? What's your experience with it?

[Miner_Storm]

People please tell me what's wrong with this phoenix
I have Asus 1070ti strix 8GB. in afterburner pov. lim 85, core +50, memory +600, in the bat file, strap 1 - claymore of stable 34.5 for several years. but a phoenix with the same settings 32 max !!! And loads gpu so that the pages in the browser are not scrolled !!! Strap 2 artifacts before power reboot, strap 3 does not start at all. What's wrong with it???
That`s bat file: -proto 3 -epsw x -straps 1 -log 0 -retrydelay 1 -Rmode 1 -coin eth -Wdog 1 -stales 1 -mport 0 -etha 0

[Kiawpqe]

PhoenixMiner suddenly stopped working after I updated the nvidia drivers to version 460.79

It seems 460.79 is not good driver:
https://www.nicehash.com/blog/post/psa-do-not-update-to-nvidia-geforce-460-79-drivers

Can confirm I also installed the latest nvidida driver, it posts gpus then immediately exits program.

PSA: Do not update to NVIDIA GeForce 460.79 drivers!
Dear miners!

We urge you to not update your GPU drivers if you are mining with NVIDIA graphics cards. It looks like the latest GeForce 460.79 drivers cause problems and do not recognize the graphics card(s) in the system.

If you have already updated to the latest version, please revert back to the previous one and it should resolve the issues.