PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Junkey]

I have two windows 10 machines with 5, rx580 8gb each. Using 5.4c with drivers 20.9.2. Getting only incorrect shares.  It has been working for a few months.  Anyone else have this issue?

Thanks,

[doctorman]

Regarding the RTX  3060  Nvidia  30x0 series  issue

@PhoenixMiner   would really appreciate a word from you on this issue

We need a way to set the memory clock Low  (windows msi burner +950 or below)  before each epoch or when we start/ Restart the miner for DAG creation, after we can increase it all the way to +1500
the is the difference of 59MHs  to 64MHs ,  5MHs  difference which add up to 60MHs for a 12 GPU rig

I used the -lidag 3    but it did not help with the Restart of the miner

PLEASE PLEASE PLEASE  give us a response on this. 
Can you please add a feature to lower the memclock before each DAG and epoch and go back up after?

I can set the miner to RESTART after the epoch change messes it up  using  -minRigSpeed <58>  but that will not fix the issue since it will restart the miner with high mem clock set in MSI.
is there a way to set MHs of the GPU to be watched instead of the whole rig?  -minRigSpeed    like  -minGPUspeed ?

THANK YOU VERY MUCH!

[waywoos]

Regarding the RTX  3060  Nvidia  30x0 series  issue

@PhoenixMiner  would really appreciate a word from you on this issue

We need a way to set the memory clock Low  (windows msi burner +950 or below)  before each epoch or when we start/ Restart the miner for DAG creation, after we can increase it all the way to +1500
the is the difference of 59MHs  to 64MHs ,  5MHs  difference which add up to 60MHs for a 12 GPU rig

I used the -lidag 3    but it did not help with the Restart of the miner

PLEASE PLEASE PLEASE  give us a response on this.  
Can you please add a feature to lower the memclock before each DAG and epoch and go back up after?

I can set the miner to RESTART after the epoch change messes it up  using  -minRigSpeed <58>  but that will not fix the issue since it will restart the miner with high mem clock set in MSI.
is there a way to set MHs of the GPU to be watched instead of the whole rig?  -minRigSpeed    like  -minGPUspeed ?

THANK YOU VERY MUCH!

let him enjoy his holidays. i have faith that we will hear from him again and will have some goodies for us soon.
he always comes through.

[Deafran]

I have two windows 10 machines with 5, rx580 8gb each. Using 5.4c with drivers 20.9.2. Getting only incorrect shares.  It has been working for a few months.  Anyone else have this issue?

Thanks,

sorry, ever try to lower your OC ?

[Junkey]

I have two windows 10 machines with 5, rx580 8gb each. Using 5.4c with drivers 20.9.2. Getting only incorrect shares.  It has been working for a few months.  Anyone else have this issue?

Thanks,

sorry, ever try to lower your OC ?

Yea, I even removed all the memory and core values to run it on default.  I really think it's driver related.

[feelnosorry]

clSetKernelArg (-48)
Fatal error detected. Restarting

Windows 10 64
RX570 8GB

Solved the problem by installing AMD driver version 20.9.1

[alexkidd81]

Hey guys
Im stuck and need help with this issue.
i am using the latest PhoenixMiner 5.4c " administration"
Windows 10 latest update
Amd 20.12.1

16 Gpus: Msi RX 580 8Gb oc
All Gpus on Compute with these settings in AMD 20.12.1 cvddc 853 cclock 1165 mvddc 853 mclock 2080

i can only get 22 hashrate for each gpu.

here is my bat file

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
timeout 15
PhoenixMiner.exe -pool ssl: //eu1.ethermine.org: 5555 -pool2 ssl: //us1.ethermine.org: 5555 -wal ******************* -rxboost 1 -straps 1
pause

when adding more commands in bat the hashrate does not increase.
i have tried different amd drivers and no luck.

rxboost 1 gives me 2 more hash every gpu

[patinencomun]

Hi, anyone knows how to set email on nanopool workers with phoenix miner?

seems -wal YOUR_WALLET.YOUR_WORKER/YOUR_EMAIL not working, says "Incorrect worker name"

-wal YOUR_WALLET/YOUR_WORKER is working fine.

Thank you!!

[Geniusvzla]

I have two windows 10 machines with 5, rx580 8gb each. Using 5.4c with drivers 20.9.2. Getting only incorrect shares.  It has been working for a few months.  Anyone else have this issue?

Thanks,

sorry, ever try to lower your OC ?

Yea, I even removed all the memory and core values to run it on default.  I really think it's driver related.

Hi, I have the AMD 20.11.2 driver on my Rx 580s and the percentage of wrong actions has gone up a little bit and I have it at 0.50% on average. You can try to re-install the modified bios on a single card and do tests.

[Geniusvzla]

Hey guys
Im stuck and need help with this issue.
i am using the latest PhoenixMiner 5.4c " administration"
Windows 10 latest update
Amd 20.12.1

16 Gpus: Msi RX 580 8Gb oc
All Gpus on Compute with these settings in AMD 20.12.1 cvddc 853 cclock 1165 mvddc 853 mclock 2080

i can only get 22 hashrate for each gpu.

here is my bat file

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
timeout 15
PhoenixMiner.exe -pool ssl: //eu1.ethermine.org: 5555 -pool2 ssl: //us1.ethermine.org: 5555 -wal ******************* -rxboost 1 -straps 1
pause

when adding more commands in bat the hashrate does not increase.
i have tried different amd drivers and no luck.

rxboost 1 gives me 2 more hash every gpu

Hi, you don't seem to have the Modified Bios on your cards, maybe that's what you need. If you already have it modified, you can try to reinstall it and do the tests

[Myl0sh]

Hi, I can't mine these days with claymore and i want to use Phoenix miner but, phoenix report "no CUDA drivers".

I have Sapphiore SE 8 xRX580 8GB.
AMD drivers 20.11.2

Code:

2021.01.04:18:34:57.857: main Phoenix Miner 5.4c Windows/msvc - Release build
2021.01.04:18:34:57.857: main Cmd line:
2021.01.04:18:34:57.857: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.miner -proto 3 -cdm 2 -cclock 1200,1200,1200,1200,1200,1200,1200,1200 -mclock 2240,2230,2220,2230,2230,2220,2240,2240 -cvddc 880,880,880,880,880,880,880,880 -mvddc 860,860,860,860,860,860,860,860
2021.01.04:18:34:57.857: main No CUDA driver found

[Geniusvzla]

Hi, anyone knows how to set email on nanopool workers with phoenix miner?

seems -wal YOUR_WALLET.YOUR_WORKER/YOUR_EMAIL not working, says "Incorrect worker name"

-wal YOUR_WALLET/YOUR_WORKER is working fine.

Thank you!!

example bat file
-wal 0xxxxxxxxxxxxxxxxxxxxxxxxx.Miner10/xxxxxx@gmail.com

example epools.txt
POOL: eth-asia1.nanopool.org:9999, WAL: 0xxxxxxxxxxxxxxxxxxxxxxxxx.Miner10/xxxxxx@gmail.com

[Geniusvzla]

Hi, I can't mine these days with claymore and i want to use Phoenix miner but, phoenix report "no CUDA drivers".

I have Sapphiore SE 8 xRX580 8GB.
AMD drivers 20.11.2

Code:

2021.01.04:18:34:57.857: main Phoenix Miner 5.4c Windows/msvc - Release build
2021.01.04:18:34:57.857: main Cmd line:
2021.01.04:18:34:57.857: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.miner -proto 3 -cdm 2 -cclock 1200,1200,1200,1200,1200,1200,1200,1200 -mclock 2240,2230,2220,2230,2230,2220,2240,2240 -cvddc 880,880,880,880,880,880,880,880 -mvddc 860,860,860,860,860,860,860,860
2021.01.04:18:34:57.857: main No CUDA driver found

CUDA is Nvidia's proprietary computing library to utilize Nvidia GPUs, AMD takes an open source approach with its graphics cards by using OpenCL.

CUDA driver not found - Nvidia driver not found. Because you have AMD

[Myl0sh]

PhoenixMiner 5.4d destroy mu miner.....In the meantime I tried gminer and now it doesn’t work.

Maybe 5.4d isn't official?

https://i.imgur.com/EYCcelD.png

[patinencomun]

example bat file
-wal 0xxxxxxxxxxxxxxxxxxxxxxxxx.Miner10/xxxxxx@gmail.com

that conf says "Incorrect worker name"

[patinencomun]

PhoenixMiner 5.4d destroy mu miner.....In the meantime I tried gminer and now it doesn’t work.

Maybe 5.4d isn't official?

Malware!

[Myl0sh]

Can anyone help to run Phoenix miner for AMD card?

Long time ago i was use Phoenix but i swith to Clay coz rx boost.
Clay doesnt work and i wan to switch back to Phoenix.

i try to use latest  AMD drivers 20.12.1

I know cuda is for Nvidia but why not Phienix recognise my RX 580 ad Open CL?

What is wrong?

[Geniusvzla]

PhoenixMiner 5.4d destroy mu miner.....In the meantime I tried gminer and now it doesn’t work.

Maybe 5.4d isn't official?

Ahhh rightly so.
no my friend the official version is PhoenixMiner 5.4c
Those people who are putting that version 5.4d must be blocked or ignored

[dwdhu]

Hi,
If you would like to use Claymore's straps, rxboost and other optimizations with PhoenixMiner please see my new app.

https://bitcointalk.org/index.php?topic=5306865

[Myl0sh]

Idk why Phoenix miner doesnt work for me. Open CL doesnt work.

I try many AMD drivers older and latest.