PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[whoismoses]

Still no DAG fix for 3000 series

Nope, doesn’t seem to be a lot of urgency behind PhoenixMiner for some reason. Thinking about switching...

[ser_merged]

What issue are you referring to? If you are talking about the slow down over the years, there is nothing miner software can do to fix that. It's an problem with hardware/firmware design and NVIDIA won't fix it.

No, it’s only win7 and win8 issue, and ethash performance under win10 is OK, and some else miners devs fix it.

[mrbugera2]

i was mining a sia coin in the past, with dual mining, and now what coin do you advise me?

[ItllBeFine]

Is anybody trying to mine with 6x 3080s and having issues with GPU#1 on 5.4c? After a duration of time GPU#1 just starts going crazy with the hashrate jumping around. When I look in GPU-z it shows vrel and vop being hit by the GPU. Upon closing and opening the software it doesn't seem to fix the issue. Now if I physically remove GPU#1 from the system (shut down and re-boot), and then I fire it up the next GPU that was #2 and has now become #1 now has the same issues. These things were perfectly stable in other rigs with only 1 or 2 3080s in them... Any ideas what the problem may be? These are EVGA 3080s (FTW3 and XC3 Ultras). I have tried different Nvidia drivers 460.89 and 461, but no luck. I just downloaded 5.5b and am trying that now. It has been stable for the first half an hour but we'll see if it just fails like the other one after a few hours.

[cnminer]

Windows auto upgrade amd driver to 20.10.35.02,

GPU0: clSetKernelArg (-48)

[mrbugera2]

Dev i have a question about dual mining.. i was trying to mine verge coin but i couldn't so i added nicehash as was written in the readme file, but it hashes 0

[hustleman]

Is anyone else having trouble controlling fan speed in batch file?  I have -fcm 2 and have -fanmin 50, 60, 70, ect...  but some of the cards just randomly run the fan based off temp.  I have various rx5700.  The ones that seem to not want to play along with batch file command are MSI Gaming, Sapphire Pulse and Powercolor red dragon.  This all started when I started running 5.5b and installed newer drivers like 20.5.1 and 20.11.2.  When running 5.3 and 5.4 with 19.x.x drivers the fan controls were excellent.

[doctorman]

Is anybody trying to mine with 6x 3080s and having issues with GPU#1 on 5.4c? After a duration of time GPU#1 just starts going crazy with the hashrate jumping around. When I look in GPU-z it shows vrel and vop being hit by the GPU. Upon closing and opening the software it doesn't seem to fix the issue. Now if I physically remove GPU#1 from the system (shut down and re-boot), and then I fire it up the next GPU that was #2 and has now become #1 now has the same issues. These things were perfectly stable in other rigs with only 1 or 2 3080s in them... Any ideas what the problem may be? These are EVGA 3080s (FTW3 and XC3 Ultras). I have tried different Nvidia drivers 460.89 and 461, but no luck. I just downloaded 5.5b and am trying that now. It has been stable for the first half an hour but we'll see if it just fails like the other one after a few hours.

what are the over clock settings?

try older driver 457 I think

[restless]

can anyone share good settings for 5700xt?
Thanks. First time touching these ... I just can't get how to set all different voltages /core/mem cvdd cvddci mvdd ...

[buraz11]

my gigabyte 5700 xt goes down to 750 mv and stable 1860 mem clock with bios mod 57 mhs, 1900 causes it to crash every few days but it goes to 59 mhs, also core 1400 or 1300

[duplj30]

can anyone share good settings for 5700xt?
Thanks. First time touching these ... I just can't get how to set all different voltages /core/mem cvdd cvddci mvdd ...

for example use AMD.Memory.Tweak.XL.exe
core ~ ​​1300MHz at 912MHz memory frequency and ~ 1320MHz at 930MHz memory frequency on optimized timings, etc.
mem 912MHz or higher (at 912MHz memory frequency, SOK operates at 950MHz. With memory frequency higher than 912MHz, SOK operates at 1085MHz, so more voltage is required
SOK ~ 812mV at a memory frequency of up to 912MHz and about 840 at a memory frequency of 930MHz. change step 6
cvddci ~ 724mv change step 6
mvdd ~ 1302mV at a memory frequency of up to 912MHz and ~ 1326 and higher at a memory frequency of 930MHz. change step 6

but in general, each card needs its own settings, you need to adjust, then you can select the minimum necessary settings
I have a link to the site on the left under the name in russian with a description of my example

[UselessGuru]

can anyone share good settings for 5700xt?
Thanks. First time touching these ... I just can't get how to set all different voltages /core/mem cvdd cvddci mvdd ...

for example use AMD.Memory.Tweak.XL.exe
core ~ ​​1300MHz at 912MHz memory frequency and ~ 1320MHz at 930MHz memory frequency on optimized timings, etc.
mem 912MHz or higher (at 912MHz memory frequency, SOK operates at 950MHz. With memory frequency higher than 912MHz, SOK operates at 1085MHz, so more voltage is required
SOK ~ 812mV at a memory frequency of up to 912MHz and about 840 at a memory frequency of 930MHz. change step 6
cvddci ~ 724mv change step 6
mvdd ~ 1302mV at a memory frequency of up to 912MHz and ~ 1326 and higher at a memory frequency of 930MHz. change step 6

but in general, each card needs its own settings, you need to adjust, then you can select the minimum necessary settings
I have a link to the site on the left under the name in russian with a description of my example

Where do I get AMD.Memory.Tweak.XL.exe?

[miner29]

can anyone share good settings for 5700xt?
Thanks. First time touching these ... I just can't get how to set all different voltages /core/mem cvdd cvddci mvdd ...

for example use AMD.Memory.Tweak.XL.exe
core ~ ​​1300MHz at 912MHz memory frequency and ~ 1320MHz at 930MHz memory frequency on optimized timings, etc.
mem 912MHz or higher (at 912MHz memory frequency, SOK operates at 950MHz. With memory frequency higher than 912MHz, SOK operates at 1085MHz, so more voltage is required
SOK ~ 812mV at a memory frequency of up to 912MHz and about 840 at a memory frequency of 930MHz. change step 6
cvddci ~ 724mv change step 6
mvdd ~ 1302mV at a memory frequency of up to 912MHz and ~ 1326 and higher at a memory frequency of 930MHz. change step 6

but in general, each card needs its own settings, you need to adjust, then you can select the minimum necessary settings
I have a link to the site on the left under the name in russian with a description of my example

Where do I get AMD.Memory.Tweak.XL.exe?

Well you could search but let me get you the link.....

https://bitcointalk.org/index.php?topic=5123724.0

[UselessGuru]

can anyone share good settings for 5700xt?
Thanks. First time touching these ... I just can't get how to set all different voltages /core/mem cvdd cvddci mvdd ...

for example use AMD.Memory.Tweak.XL.exe
core ~ ​​1300MHz at 912MHz memory frequency and ~ 1320MHz at 930MHz memory frequency on optimized timings, etc.
mem 912MHz or higher (at 912MHz memory frequency, SOK operates at 950MHz. With memory frequency higher than 912MHz, SOK operates at 1085MHz, so more voltage is required
SOK ~ 812mV at a memory frequency of up to 912MHz and about 840 at a memory frequency of 930MHz. change step 6
cvddci ~ 724mv change step 6
mvdd ~ 1302mV at a memory frequency of up to 912MHz and ~ 1326 and higher at a memory frequency of 930MHz. change step 6

but in general, each card needs its own settings, you need to adjust, then you can select the minimum necessary settings
I have a link to the site on the left under the name in russian with a description of my example

Where do I get AMD.Memory.Tweak.XL.exe?

Well you could search but let me get you the link.....

https://bitcointalk.org/index.php?topic=5123724.0

Thanks

I tried  1.3, 1.4 & 1.5 Beta. All just give me a white window. Any ideas?

[ItllBeFine]

Is anybody trying to mine with 6x 3080s and having issues with GPU#1 on 5.4c? After a duration of time GPU#1 just starts going crazy with the hashrate jumping around. When I look in GPU-z it shows vrel and vop being hit by the GPU. Upon closing and opening the software it doesn't seem to fix the issue. Now if I physically remove GPU#1 from the system (shut down and re-boot), and then I fire it up the next GPU that was #2 and has now become #1 now has the same issues. These things were perfectly stable in other rigs with only 1 or 2 3080s in them... Any ideas what the problem may be? These are EVGA 3080s (FTW3 and XC3 Ultras). I have tried different Nvidia drivers 460.89 and 461, but no luck. I just downloaded 5.5b and am trying that now. It has been stable for the first half an hour but we'll see if it just fails like the other one after a few hours.

what are the over clock settings?

try older driver 457 I think

Overclock settings aren't a factor here since the cards are perfectly stable at their overclocks if they aren't in the #1 position. No matter how low I turn the overclocks it is still unstable. So far with 5.5b I have been stable for 10 hours now. I am also considering that maybe the 5.4c was just corrupted when I downloaded it and I just needed a fresh install possibly. Currently stable with 460.89 drivers and 5.5b

[neogeo]

I have try 5.5b on RaveOS (miner loaded from repo) and wattage consumption is still higher than TRM and stii the same as 5.4c...

How to check driver version on a RaveOS? Maybe that ***king me?

[Bighero76]

I have 2 3090’s ready to cgo for this. Whats expected hash rate and roi at current eth price

[ankah]

Anyone having issues with 560s? It was working fine until 5.5b. I went from 5.1c (was not playing nice with the latest Radeon driver) and now I get low single digits rates, almost as if the card was set to graphics and not compute.

[mrbugera2]

have you guyed tried dual mining? (there is zil coin but it is on their pool, and i want to mine eth on ethermine, and zil to its pool)

thanks for your reply

[duplj30]

can anyone share good settings for 5700xt?
Thanks. First time touching these ... I just can't get how to set all different voltages /core/mem cvdd cvddci mvdd ...

for example use AMD.Memory.Tweak.XL.exe
core ~ ​​1300MHz at 912MHz memory frequency and ~ 1320MHz at 930MHz memory frequency on optimized timings, etc.
mem 912MHz or higher (at 912MHz memory frequency, SOK operates at 950MHz. With memory frequency higher than 912MHz, SOK operates at 1085MHz, so more voltage is required
SOK ~ 812mV at a memory frequency of up to 912MHz and about 840 at a memory frequency of 930MHz. change step 6
cvddci ~ 724mv change step 6
mvdd ~ 1302mV at a memory frequency of up to 912MHz and ~ 1326 and higher at a memory frequency of 930MHz. change step 6

but in general, each card needs its own settings, you need to adjust, then you can select the minimum necessary settings
I have a link to the site on the left under the name in russian with a description of my example

Where do I get AMD.Memory.Tweak.XL.exe?

Well you could search but let me get you the link.....

https://bitcointalk.org/index.php?topic=5123724.0

Thanks

I tried  1.3, 1.4 & 1.5 Beta. All just give me a white window. Any ideas?

you need to put the Windows system into test mode, usually when you start this program, it is automatically prompted to do this