PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[mrbugera2]

how many cards? Try give 50-60gb

6 gpu in each rig.

how to increase?
 i have 16000 to 32000

i must type it in advanced settings?

1gb = 1024Mb
8Gb per card = 8192Mb vm space needed
8192Mb * 6 cards = 49125Mb vm space needed for the rig

Yes you need to enter it in the advanced settings

which will ne better, what to tupe in inital size and in maximum.. thanks for your reply

[Ahmed69]

how many cards? Try give 50-60gb

6 gpu in each rig.

how to increase?
 i have 16000 to 32000

i must type it in advanced settings?

1gb = 1024Mb
8Gb per card = 8192Mb vm space needed
8192Mb * 6 cards = 49125Mb vm space needed for the rig

Yes you need to enter it in the advanced settings

which will ne better, what to tupe in inital size and in maximum.. thanks for your reply

witchever , just tupe in man.. gooz luk

[mrbugera2]

Just registered to post my thoughts!

I’ve been a “reader/browser” for a very long time. Reading and learning, strictly!

But since last few months and 50 pages long, holy crap! So many dumb questions from newbies as dumb as how to turn on their computers!

C’mon!

Reddit is even worse full with same basic questions. I can tell most of these wanna-be miners never even touched computers but ETH price has given them huge erection to pop in!

and whats bad on that? you knew everything? dont post like that.. and dont offtopic..
if you are here to help others go on, or else dont quote any of newbies comments..

act like professional.. not like you are now..

have more questions? you dont like something???

pm no problem

how annoying people like you are, acting like you know everything, dont you even dare to reply this quote

[Ahmed69]

Just registered to post my thoughts!

I’ve been a “reader/browser” for a very long time. Reading and learning, strictly!

But since last few months and 50 pages long, holy crap! So many dumb questions from newbies as dumb as how to turn on their computers!

C’mon!

Reddit is even worse full with same basic questions. I can tell most of these wanna-be miners never even touched computers but ETH price has given them huge erection to pop in!

and whats bad on that? you knew everything? dont post like that.. and dont offtopic..
if you are here to help others go on, or else dont quote any of newbies comments..

act like professional.. not like you are now..

have more questions? you dont like something???

pm no problem

how annoying people like you are, acting like you know everything, dont you even dare to reply this quote

Dude, I am looking at your posts and all I see is how do I do this ... how do I do that!!

Learn to read / search / google before wasting resources.

Each and every one of these kind people who help newbies like yourself used to be newbie but they did their homework first. Read the documentation, learn Windows / Linux whatever OS you want to run your rigs. Then when you hit something difficult, search all these messages first before posting your questions.

Look up annoying and professional then ask me not to be one or act like one!

On the same note, you owe all these people who help you ETH! They give you free advice but do NOT abuse it.

Windows virtual memory set up? How hard is it to grab a calculator and do the math??

No! I don’t know everything but I am wasting so much time jumping topics to topics to learn something NEW - not crappy questions.

And when same people on this very thread ask you to do some stuff on your own by reading previous questions and learn, you lose your temper which proves IF you knew something, you would not bother to even help.

As a matter of fact, even I am trying to teach you something. But, you have no clue what the hell I mean!!!!!

How about we mine ETH for you using own own rigs?? It makes life easier for all of us!!

[sdanzzz]

-mclock <n> Set GPU memory clock in MHz (0 for default)

What are the possible values for this field - it seems like using +500 or 1500 doesn't correctly set the values for me ever, I have to do it through other tools.

[StreaMRoLLeR]

Please help me out. I am stuck with 36MH for 1080ti on phoenixminer 5.5c

Using strap -2 or -3 dont do anything. Without the pill is it the MAX MH i can squueze from this gpu ?

+500 mem + 0 core %90 PT

[fapar]

-mclock <n> Set GPU memory clock in MHz (0 for default)

What are the possible values for this field - it seems like using +500 or 1500 doesn't correctly set the values for me ever, I have to do it through other tools.

How many videocards do you have? Example for all or one videocard: -mclock *:1500 // * indicates that all videocards will be used, 1500 will set the video memory frequency to 1500MHz. You can configure it for each videocard separately. For example, -mclock 1:1550,3:1600 // this means that the first card will have a 1550 MHz mclock, and the third one will have 1600.

[VRMdude]

Hi all and congrats to the devs pheonix miner is pretty nice been using it since gave up cpu mining lol never though ide be command line overclocking in linux lol

Quick question please have searched around for answer but obv not found one.

My GPU mining rig running ubuntu 18.04 headless and seeking clarity on rmode. Is using option 2 to reboot linux possible or is it windows only?

I ask because unable to get a reboot of linux when wdog shuts Pheonix miner down and docs mention only reboot.bat. I have placed reboot bash scripts in the miner folder named both reboot.sh and reboot.bat, the latter out of shear frustration but i cannot get the system to reboot when wdog closes the miner. Currently using crontab to start miner on reboot.

rmode <n> Selects the restart mode when a GPU crashes or freezes:
     0: disabled - miner will shut down instead of restarting
     1: restart with the same command line options - this is the default
     2: reboot (shut down miner and execute reboot.bat)

[higz]

Any know why miner would stop right away with message saying FATAL ERROR: DEBUGGER DETECTED?

[Hackintoshihope]

Just registered to post my thoughts!

I’ve been a “reader/browser” for a very long time. Reading and learning, strictly!

But since last few months and 50 pages long, holy crap! So many dumb questions from newbies as dumb as how to turn on their computers!

C’mon!

Reddit is even worse full with same basic questions. I can tell most of these wanna-be miners never even touched computers but ETH price has given them huge erection to pop in!

and whats bad on that? you knew everything? dont post like that.. and dont offtopic..
if you are here to help others go on, or else dont quote any of newbies comments..

act like professional.. not like you are now..

have more questions? you dont like something???

pm no problem

how annoying people like you are, acting like you know everything, dont you even dare to reply this quote

Dude, I am looking at your posts and all I see is how do I do this ... how do I do that!!

Learn to read / search / google before wasting resources.

Each and every one of these kind people who help newbies like yourself used to be newbie but they did their homework first. Read the documentation, learn Windows / Linux whatever OS you want to run your rigs. Then when you hit something difficult, search all these messages first before posting your questions.

Look up annoying and professional then ask me not to be one or act like one!

On the same note, you owe all these people who help you ETH! They give you free advice but do NOT abuse it.

Windows virtual memory set up? How hard is it to grab a calculator and do the math??

No! I don’t know everything but I am wasting so much time jumping topics to topics to learn something NEW - not crappy questions.

And when same people on this very thread ask you to do some stuff on your own by reading previous questions and learn, you lose your temper which proves IF you knew something, you would not bother to even help.

As a matter of fact, even I am trying to teach you something. But, you have no clue what the hell I mean!!!!!

How about we mine ETH for you using own own rigs?? It makes life easier for all of us!!

I have read them, and I know what you mean. However sometimes we might just be bored at home sick and want to help

[supersolak]

I am trying to build my own android application. I want to remotely control phoenix miner. but I couldnt find any api documentation. Can you help me?

[scryptr]

6900XT@5.5c:
2021.02.16:12:24:20.322: main Available GPUs for mining:
2021.02.16:12:24:20.322: main GPU0: AMD Radeon RX 6900 XT (pcie 45), OpenCL 2.0, 16 GB VRAM, 40 CUs


But 6900xt does have 80 compute units? 

THIS IS BEING REPORTED IN MULTIPLE MINING THREADS--

The developer that figures it out may haul in a small fortune.       --scryptr

[batsonxl]

@Mr. Phoenix you said long time ago will add strap feature for polaris cards in january. it 16Feb today. Will be very happy if you can give us this present.

[Howardroid]

is there example command to run this -powlim paramater for diff gpu?
for example i want run gpu 1 75%, gpu 2 75% and gpu 3 65% power limit

i try this but its shows all gpu start with 100% power at when i start phoenixminer.bat
PhoenixMiner.exe -powlim 75,75,75


Thank you

[Bagge6]

Hello

I'm looking to connect 3-4 gpu's to my mobo, is this a right splitter where I can connect the risers to? https://www.amazon.de/-/en/4Port-Express-Expansion-Adapter-5Gbps/dp/B08LQ88Y5N/ref=sr_1_9?crid=1OG3SDVRU9G88&dchild=1&keywords=pcie+splitter+bergbau&qid=1613525457&sprefix=pcie+splitter%2Caps%2C168&sr=8-9

If so, does this work on every pcie slot (16x, 4x and 1x)?

(if you are afraid of links, type this to amazon.de: 4Port PCI-E to USB 3.0 HUB PCI Express. It's the one that costs 5.91 eur)

[Geniusvzla]

Hello

I'm looking to connect 3-4 gpu's to my mobo, is this a right splitter where I can connect the risers to? https://www.amazon.de/-/en/4Port-Express-Expansion-Adapter-5Gbps/dp/B08LQ88Y5N/ref=sr_1_9?crid=1OG3SDVRU9G88&dchild=1&keywords=pcie+splitter+bergbau&qid=1613525457&sprefix=pcie+splitter%2Caps%2C168&sr=8-9

If so, does this work on every pcie slot (16x, 4x and 1x)?

(if you are afraid of links, type this to amazon.de: 4Port PCI-E to USB 3.0 HUB PCI Express. It's the one that costs 5.91 eur)

Greetings, look for this on Ebay:

PCI Express PCI-E riser 1x to 16x 1 to 4 PCIE USB 3.0 H Slot Multiplier

there are many makes and models.

[batsonxl]

Hello

I'm looking to connect 3-4 gpu's to my mobo, is this a right splitter where I can connect the risers to? https://www.amazon.de/-/en/4Port-Express-Expansion-Adapter-5Gbps/dp/B08LQ88Y5N/ref=sr_1_9?crid=1OG3SDVRU9G88&dchild=1&keywords=pcie+splitter+bergbau&qid=1613525457&sprefix=pcie+splitter%2Caps%2C168&sr=8-9

If so, does this work on every pcie slot (16x, 4x and 1x)?

(if you are afraid of links, type this to amazon.de: 4Port PCI-E to USB 3.0 HUB PCI Express. It's the one that costs 5.91 eur)

yes it works on every slot

[Bagge6]

Okay thanks for the replies

I found this on amazon.de: https://www.amazon.de/-/en/gp/product/B07B2LC8K3/ref=ox_sc_act_title_1?smid=A13ZJ94CYI3F7Y&psc=1
That will probably work... And what type of riser is good, a molex, pcie or sata powered one? What i'm thinking is that does my psu run out of molex connectors if the gpu's need power from them..

[batsonxl]

Okay thanks for the replies

I found this on amazon.de: https://www.amazon.de/-/en/gp/product/B07B2LC8K3/ref=ox_sc_act_title_1?smid=A13ZJ94CYI3F7Y&psc=1
That will probably work... And what type of riser is good, a molex, pcie or sata powered one? What i'm thinking is that does my psu run out of molex connectors if the gpu's need power from them..

best=6 pin
ok = molex (one molex to one riser only)
bad = sata (one sata to one riser only)

[Bagge6]

Okay so I would need molex -> 6 pin PCIe converters too? Do I need to power up both, GPU's and risers from PSU? Or does the GPU take power from the riser?