PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[siddhas]

I am getting a "Debugger detected" fatal error at start on 5.6a...I have added "-amd" to the end of the command line. No error on 5.5c.

[Targonis]

I am getting a "Debugger detected" fatal error at start on 5.6a...I have added "-amd" to the end of the command line. No error on 5.5c.

What platform are you mining on and what AMD driver version are you running?

[Miningminds]

Hi everybody

Any of you have noticed some change in hashrate/consumption with this new beta version?

Also, I would like to ask if someone is using dual mining eth+xvg and could tell me if it is profitable versus ethereum only. I have a rig with mixed 3070 and 3060ti's.

Thanks!!

[Targonis]

NiceHash did a ugly but nice trick screaming Phoenix Miner Virus! But you now what? We have solution for you! We created for you our own miner

In Phoenix i have less heat and 2MH/s more but i whish they upgrade to work with latest AMD drivers.Dont want to install some ancient 20.8.2 driver to work, otherwise -clkernel issue.

You must have missed that 5.5c was compatible with AMD 21.1.1 through 21.2.3, and 5.6a is compatible with AMD drivers through 21.3.2(AMD drivers 21.4.1 isn't compatible).

[UselessGuru]

Hi everybody

Any of you have noticed some change in hashrate/consumption with this new beta version?

Also, I would like to ask if someone is using dual mining eth+xvg and could tell me if it is profitable versus ethereum only. I have a rig with mixed 3070 and 3060ti's.

Thanks!!

>>  if someone is using dual mining eth+xvg

Not possible afaik. Readme says:


PhoenixMiner also supports **ETCHash** for mining ETC, **Ubqhash** for
mining UBQ, **ProgPOW** for mining BCI, and **dual mining**
Ethash/ETCHash/Ubqhash with **Blake2s**.

[P00P135]

NiceHash did a ugly but nice trick screaming Phoenix Miner Virus! But you now what? We have solution for you! We created for you our own miner

In Phoenix i have less heat and 2MH/s more but i whish they upgrade to work with latest AMD drivers.Dont want to install some ancient 20.8.2 driver to work, otherwise -clkernel issue.

You must have missed that 5.5c was compatible with AMD 21.1.1 through 21.2.3, and 5.6a is compatible with AMD drivers through 21.3.2(AMD drivers 21.4.1 isn't compatible).

Phoenix Miner 5.6a is not avaible on legit site i hope you are not trying to sell me some virus dude huh?

However i will try 21.2.3 with 5.5c i hope i will not get kernel error. Still wish latest drivers for games.

5.6a beta was posted by OP a week ago, its also on his Github.

[Miningminds]

Hi everybody

Any of you have noticed some change in hashrate/consumption with this new beta version?

Also, I would like to ask if someone is using dual mining eth+xvg and could tell me if it is profitable versus ethereum only. I have a rig with mixed 3070 and 3060ti's.

Thanks!!

>>  if someone is using dual mining eth+xvg

Not possible afaik. Readme says:


PhoenixMiner also supports **ETCHash** for mining ETC, **Ubqhash** for
mining UBQ, **ProgPOW** for mining BCI, and **dual mining**
Ethash/ETCHash/Ubqhash with **Blake2s**.

Ethash/ETCHash/Ubqhash with **Blake2s**.

afaik for mining xvg coin it uses the blake2s algo, so ethash + blake2s should be possible?

[cavaoubien]

Hello, I am a "young" minor. I use Phoenixminer on my PC with an RTX 3070. Normally I get up to 62-63 MH/s but I realize that sometimes I don't get a share. (no rejections either). When I reboot, I notice regular shares, without overclock. As soon as I put the overclock back on, it's a problem. Sometimes I have no problem with the overclock.
Is it better to lower the number of MH/s to have more shares, and if so, how to find the right balance?
Thanks

[Targonis]

NiceHash did a ugly but nice trick screaming Phoenix Miner Virus! But you now what? We have solution for you! We created for you our own miner

In Phoenix i have less heat and 2MH/s more but i whish they upgrade to work with latest AMD drivers.Dont want to install some ancient 20.8.2 driver to work, otherwise -clkernel issue.

You must have missed that 5.5c was compatible with AMD 21.1.1 through 21.2.3, and 5.6a is compatible with AMD drivers through 21.3.2(AMD drivers 21.4.1 isn't compatible).

Phoenix Miner 5.6a is not avaible on legit site i hope you are not trying to sell me some virus dude huh?

However i will try 21.2.3 with 5.5c i hope i will not get kernel error. Still wish latest drivers for games.

5.6a beta was posted by OP a week ago, its also on his Github.

Minerstat is also pushing down the legit 5.6a.  No problem on a Radeon 6800 and the legit 5.6a with Radeon Software 21.3.2 and earlier. 

[Sledge0001]

Trying out the 5.6a beta right now on a 8 x 3090 rack. After 8 hours in and it seems like the stale rate has dropped a bit and hashrate seems a tad more stable on the pool end.

A bit early to say 100% success but so far 0 issues...

[Seph213]

Trying out the 5.6a beta right now on a 8 x 3090 rack. After 8 hours in and it seems like the stale rate has dropped a bit and hashrate seems a tad more stable on the pool end.

A bit early to say 100% success but so far 0 issues...

I have the same issue with my 3080’s . My 1070’s are performing very well

Seems to be a problem with the 30 series and would be nice if Phoenixminer devs would address this and see if maybe its something they can tweak in their software .

[Verbl Kint]

However i will try 21.2.3 with 5.5c i hope i will not get kernel error. Still wish latest drivers for games.

5.6a beta was posted by OP a week ago, its also on his Github.

Minerstat is also pushing down the legit 5.6a.  No problem on a Radeon 6800 and the legit 5.6a with Radeon Software 21.3.2 and earlier.  

Are you doing Fast Timing on Adrenalin or using the -mt flag?

[UselessGuru]

Hi everybody

Any of you have noticed some change in hashrate/consumption with this new beta version?

Also, I would like to ask if someone is using dual mining eth+xvg and could tell me if it is profitable versus ethereum only. I have a rig with mixed 3070 and 3060ti's.

Thanks!!

>>  if someone is using dual mining eth+xvg

Not possible afaik. Readme says:


PhoenixMiner also supports **ETCHash** for mining ETC, **Ubqhash** for
mining UBQ, **ProgPOW** for mining BCI, and **dual mining**
Ethash/ETCHash/Ubqhash with **Blake2s**.

Ethash/ETCHash/Ubqhash with **Blake2s**.

afaik for mining xvg coin it uses the blake2s algo, so ethash + blake2s should be possible?

>> afaik for mining xvg coin it uses the blake2s algo, so ethash + blake2s should be possible?
Nope. Veriblock (VBK) does not use Blake2s. It uses vBlake2.

https://wheretomine.io/coins/veriblock

[Targonis]

However i will try 21.2.3 with 5.5c i hope i will not get kernel error. Still wish latest drivers for games.

5.6a beta was posted by OP a week ago, its also on his Github.

Minerstat is also pushing down the legit 5.6a.  No problem on a Radeon 6800 and the legit 5.6a with Radeon Software 21.3.2 and earlier.  

Are you doing Fast Timing on Adrenalin or using the -mt flag?

I am using Radeon Software to configure, Fast Timing at 2100 on the memory, power limit to the maximum of +10 percent.   I am getting 62.5MH/s or so for speed.   21.4.1 is NOT working with 5.6a, but 21.3.2 works.

[crazykat8091]

I have no issue with 21.4.1 or 5.6a.

https://i.imgur.com/GwDpbHS.jpeg

[Targonis]

I have no issue with 21.4.1 or 5.6a.

You may be using a non-Radeon 6000 series video card.

[evgens1777]

Why doesn't the rxboost of Phoenix work on the MSI RX 5700xt Mech?

Hello!
100 times reread the readme, as many Googled,
I do not see in the miner window changes in the hashrate when using
rxboost 1 (2,3, etc.) from Phoenix manner, such as-vrm 25, as
at 580x.
vrm without rxboost-tried, same result.
Here, I do not remember in which branch, I read that when adding
- openclLocalWork 128 -openclGlobalMultiplier 4096 in the latest
versions of Phoenix, the hash increases to 64 MX.
Yes, it is, but half of the balls are Disabled. ...
Vin 10 x64 pro 20H2, everything is disabled, from the firewall to the Defender of Vin,
Adrenaline 20.11.1, Phoenixes 5.5, 5.6.
AMD Computer Switch, Patch 1.4.9. In stock-50, c rxboost hoped for 52-53.
Run from the Admin, the gt reacts normally, and+, and -,
for 5700ht about 120 is optimal.
Tell me who faced it.
With respect.

[dazmann]

Why doesn't the rxboost of Phoenix work on the MSI RX 5700xt Mech?

Hello!
100 times reread the readme, as many Googled,
I do not see in the miner window changes in the hashrate when using
rxboost 1 (2,3, etc.) from Phoenix manner, such as-vrm 25, as
at 580x.
vrm without rxboost-tried, same result.
Here, I do not remember in which branch, I read that when adding
- openclLocalWork 128 -openclGlobalMultiplier 4096 in the latest
versions of Phoenix, the hash increases to 64 MX.
Yes, it is, but half of the balls are Disabled. ...
Vin 10 x64 pro 20H2, everything is disabled, from the firewall to the Defender of Vin,
Adrenaline 20.11.1, Phoenixes 5.5, 5.6.
AMD Computer Switch, Patch 1.4.9. In stock-50, c rxboost hoped for 52-53.
Run from the Admin, the gt reacts normally, and+, and -,
for 5700ht about 120 is optimal.
Tell me who faced it.
With respect.

RX 5700XT hashrate is around 55MH/s, how much are you getting?
The 6800 series are the ones that gets 64MH/s

[crazykat8091]

I have no issue with 21.4.1 or 5.6a.

https://i.imgur.com/GwDpbHS.jpeg

You may be using a non-Radeon 6000 series video card.

If you see my MH/s you would know that it is 6800XT.

[agabellini]

Hello,

I have a rig with a mix of AMD 4x0 and 5x0 cards, and I use ethermine. On the portal he often reports "stale hashes" to me, but on Phoenix Miner I can't understand which GPU can generate them. Is there any way to figure this out without trying one GPU at a time?

Thanks,
Andrea