Bitcoin Forum
October 20, 2019, 04:57:26 AM *
News: 10th anniversary art contest
 
   Home   Help Search Login Register More  
Pages: « 1 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 [82] 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 ... 194 »
  Print  
Author Topic: PhoenixMiner 4.7c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)  (Read 198022 times)
UnclWish
Sr. Member
****
Offline Offline

Activity: 924
Merit: 252


View Profile
April 26, 2018, 03:38:48 PM
 #1621

DDU 1st is always better for a clean removal.

I you use custom bioses, don't forget to patch the 18.3.4 driver before the reboot.
Drivers 18.x.x don't need patch. AMD removed check mod bios. I'm use RX 580 8Gb and didn't patch drivers from 17.12.x when AMD was removed mod bios protection... All my 580 cards use modded bioses.
1571547446
Hero Member
*
Offline Offline

Posts: 1571547446

View Profile Personal Message (Offline)

Ignore
1571547446
Reply with quote  #2

1571547446
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1571547446
Hero Member
*
Offline Offline

Posts: 1571547446

View Profile Personal Message (Offline)

Ignore
1571547446
Reply with quote  #2

1571547446
Report to moderator
FRosterdam
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
April 26, 2018, 05:10:51 PM
 #1622

Dr. PhoenixMiner,

Could you add the a little bit options to ur miner for Nvidia cards? Such as:
-fanmin
-fanmax
-tmax
-powlim
-cclock
-mclock

And one great option for AMD cards  -  enable compute mod by adding option -y into the bat? Not only typing key "y".

Claymore recently added these options. Next step is yours. I love ur miner for stability and hashrate. But I believe that these options can improve miner's positions.
4ward
Member
**
Offline Offline

Activity: 474
Merit: 18


View Profile
April 26, 2018, 05:33:49 PM
 #1623

DDU 1st is always better for a clean removal.

I you use custom bioses, don't forget to patch the 18.3.4 driver before the reboot.
Drivers 18.x.x don't need patch. AMD removed check mod bios. I'm use RX 580 8Gb and didn't patch drivers from 17.12.x when AMD was removed mod bios protection... All my 580 cards use modded bioses.

RX580 is not checked, but RX480 is, and needs the patch

Buyingallcoinsz
Sr. Member
****
Offline Offline

Activity: 392
Merit: 263



View Profile
April 26, 2018, 06:09:53 PM
 #1624

We can guarantee that the executables are 100% clean. We even decided to avoid packing the executable to allow better inspection by the anti-virus programs. Still, there is always some chance that an over-aggressive anti-virus program will give you a false positive but you can safely ignore it. As an additional precaution you can check if the .zip archive you have downloaded has the right checksum (the checksums are listed in text file PhoenixMiner_2.1_checksums.txt, which is in the MEGA folder from the first post in this thread).


Hmm seems nice
xunl
Newbie
*
Offline Offline

Activity: 33
Merit: 0


View Profile
April 27, 2018, 03:02:59 AM
 #1625

DDU 1st is always better for a clean removal.

I you use custom bioses, don't forget to patch the 18.3.4 driver before the reboot.
Drivers 18.x.x don't need patch. AMD removed check mod bios. I'm use RX 580 8Gb and didn't patch drivers from 17.12.x when AMD was removed mod bios protection... All my 580 cards use modded bioses.

RX580 is not checked, but RX480 is, and needs the patch

Thank you all for the hint. I am on 580 so I won't patch. However, I noticed in the past when I clean install AMD drivers from Clean Windows, it installed much quicker (screen flick 4 times per GPU) than upgrade (it seems AMD is removing old driver on each GPU one-by-one in the background The screen flicking hundreds of times before completion and sometimes OS hang during upgrade).
Yellow_donkey
Newbie
*
Offline Offline

Activity: 29
Merit: 0


View Profile
April 27, 2018, 03:58:17 AM
 #1626

Hello Developer,

Great miner I/we really appreciate the work you have put into it.  With that said, I have been using PM since 2.2 I think, although I do like the auto -dcri feature Claymore uses now, so I do cheat every now and then and sneak back to Claymore, it's like an old dirty whore, you know, anyways end up going back, well maybe not, anyways, I digress...

I would like to request an expansion of a current feature.  Your -coin feature is great but I only solo mine to geth and with that said I typically solo mine the lower difficulty coins I think might have a shot of increasing in price, someday.  With that said, you do include a few good coins in your -coin feature but if you could include ALL coins on the Minerpool.net splash screen, that would be great!

https://minerpool.net/

This would provide a much greater DAG coverage for that feature, I know its pretty miner (pun intended) request but maybe someday, it would be nice to have more coverage.  Thanks again!

 
lesjokolat
Newbie
*
Offline Offline

Activity: 112
Merit: 0


View Profile
April 27, 2018, 04:28:49 AM
 #1627

To any Nvidia 1080 or 1080it owners check out OhgodETHlargement pill. its an app in background that supposedly can push you to around 54 mhs. I use amd so out of luck. Curious to see if it indeed affects PM hash rates. glta
j2james
Newbie
*
Offline Offline

Activity: 61
Merit: 0


View Profile
April 27, 2018, 10:09:01 AM
 #1628

Hi PM developers, I have caught 719 error again

Code:
2018.04.27:00:09:35.971: main *** 84:20 ***************************************************
2018.04.27:00:09:35.971: main Eth: Mining ETH on eth-eu1.nanopool.org:9999 for 58:16
2018.04.27:00:09:35.971: main Eth speed: 192.446 MH/s, shares: 5639/1/0, time: 84:20
2018.04.27:00:09:35.971: main GPUs: 1: 32.077 MH/s (886) 2: 32.077 MH/s (886) 3: 32.072 MH/s (990) 4: 32.073 MH/s (914) 5: 32.081 MH/s (978) 6: 32.065 MH/s (986)
2018.04.27:00:09:35.971: main Eth: Accepted shares 5639 (0 stales), rejected shares 1 (0 stales)
2018.04.27:00:09:35.971: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.04.27:00:09:35.971: main Eth: Maximum difficulty of found share: 101.3 TH (!!!)
2018.04.27:00:09:35.971: main Eth: Average speed (5 min): 192.450 MH/s
2018.04.27:00:09:35.971: main Eth: Effective speed: 185.74 MH/s; at pool: 185.70 MH/s
2018.04.27:00:09:35.971: main 
2018.04.27:00:09:37.914: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x1766bfe4a9e0dc0e36f5898303dfcf6febf9d2de80b3c6008140f25be0faa81e","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.04.27:00:09:39.330: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.04.27:00:09:39.374: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x1766bfe4a9e0dc0e36f5898303dfcf6febf9d2de80b3c6008140f25be0faa81e","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.04.27:00:09:39.791: GPU1 Eth: GPU1: ETH share found!
2018.04.27:00:09:39.791: eths Eth: Send: {"id":4,"jsonrpc":"2.0","method":"eth_submitWork","params":["0x4291c1ebdf906be3","0x1766bfe4a9e0dc0e36f5898303dfcf6febf9d2de80b3c6008140f25be0faa81e","0x754d196873285068b9758fb11a0173e742a000042396829e5520e21edc991a0c"]}

2018.04.27:00:09:39.791: eths Eth: Share actual difficulty: 44.2 GH (!)
2018.04.27:00:09:39.847: eths Eth: Received: {"jsonrpc":"2.0","id":4,"result":true}
2018.04.27:00:09:39.847: eths Eth: Share accepted in 56 ms
2018.04.27:00:09:40.972: main Eth speed: 192.445 MH/s, shares: 5640/1/0, time: 84:21
2018.04.27:00:09:40.972: main GPUs: 1: 32.077 MH/s (887) 2: 32.078 MH/s (886) 3: 32.072 MH/s (990) 4: 32.072 MH/s (914) 5: 32.081 MH/s (978) 6: 32.065 MH/s (986)
2018.04.27:00:09:42.774: main GPU1: 46C 47%, GPU2: 47C 48%, GPU3: 46C 48%, GPU4: 43C 46%, GPU5: 51C 51%, GPU6: 44C 47%
2018.04.27:00:09:45.974: main Eth speed: 192.446 MH/s, shares: 5640/1/0, time: 84:21
2018.04.27:00:09:45.974: main GPUs: 1: 32.077 MH/s (887) 2: 32.078 MH/s (886) 3: 32.072 MH/s (990) 4: 32.073 MH/s (914) 5: 32.081 MH/s (978) 6: 32.065 MH/s (986)
2018.04.27:00:09:46.211: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x01d002dd9ad25e58410c19e45fe9bb97119b170a7d006ca319a05ac6df94f9cd","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.04.27:00:09:46.212: eths Eth: New job #01d002dd from eth-eu1.nanopool.org:9999; diff: 10000MH
2018.04.27:00:09:49.330: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.04.27:00:09:49.330: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xb788e79","0x875baebbe7a373368dfe967eea1124fa05d9a761ceec343ef981ae859aa34f32"]}

2018.04.27:00:09:49.375: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x01d002dd9ad25e58410c19e45fe9bb97119b170a7d006ca319a05ac6df94f9cd","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.04.27:00:09:50.975: main Eth speed: 192.467 MH/s, shares: 5640/1/0, time: 84:21
2018.04.27:00:09:50.975: main GPUs: 1: 32.076 MH/s (887) 2: 32.078 MH/s (886) 3: 32.093 MH/s (990) 4: 32.073 MH/s (914) 5: 32.081 MH/s (978) 6: 32.066 MH/s (986)
2018.04.27:00:09:54.834: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0xe6743734dd4f8cb5835f43326e29c07e9d6ff71f40f96ff0a190558a16a8d077","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.04.27:00:09:54.834: eths Eth: New job #e6743734 from eth-eu1.nanopool.org:9999; diff: 10000MH
2018.04.27:00:09:56.125: GPU3 CUDA error in CudaProgram.cu:264 : unspecified launch failure (719)
2018.04.27:00:09:56.143: GPU3 GPU3 search error: unspecified launch failure
2018.04.27:00:09:56.156: GPU2 CUDA error in CudaProgram.cu:264 : unspecified launch failure (719)
2018.04.27:00:09:56.156: GPU2 GPU2 search error: unspecified launch failure
2018.04.27:00:09:56.169: GPU4 CUDA error in CudaProgram.cu:264 : unspecified launch failure (719)
2018.04.27:00:09:56.169: GPU4 GPU4 search error: unspecified launch failure
2018.04.27:00:09:56.170: GPU6 CUDA error in CudaProgram.cu:264 : unspecified launch failure (719)
2018.04.27:00:09:56.170: GPU6 GPU6 search error: unspecified launch failure
2018.04.27:00:09:56.175: main Eth speed: 192.467 MH/s, shares: 5640/1/0, time: 84:21
2018.04.27:00:09:56.175: main GPUs: 1: 32.076 MH/s (887) 2: 32.079 MH/s (886) 3: 32.094 MH/s (990) 4: 32.072 MH/s (914) 5: 32.080 MH/s (978) 6: 32.065 MH/s (986)
2018.04.27:00:09:56.176: GPU1 CUDA error in CudaProgram.cu:264 : unspecified launch failure (719)
2018.04.27:00:09:56.176: GPU1 GPU1 search error: unspecified launch failure
2018.04.27:00:09:56.177: GPU5 CUDA error in CudaProgram.cu:264 : unspecified launch failure (719)
2018.04.27:00:09:56.177: GPU5 GPU5 search error: unspecified launch failure
2018.04.27:00:09:56.514: wdog Thread(s) not responding. Restarting.
2018.04.27:00:09:59.331: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.04.27:00:09:59.374: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0xe6743734dd4f8cb5835f43326e29c07e9d6ff71f40f96ff0a190558a16a8d077","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

I use PM 2.9e with the following params

set miner_params=-nvidia -cdm 2 -cdmport 3333 -cdmpass 123 -minRigSpeed 188 -rmode 2 -tstop 65 -tstart 40 -logsmaxsize 0

If you need I can provide more logs
sidaliroy
Newbie
*
Offline Offline

Activity: 23
Merit: 0


View Profile
April 27, 2018, 06:20:24 PM
 #1629

When 3.0?
Digital_Seytan
Newbie
*
Offline Offline

Activity: 133
Merit: 0


View Profile
April 27, 2018, 06:49:11 PM
 #1630

When 3.0?

Version 2.9.e works super it is too early for phoenixminer version 3.0.
it is possible with phoenixminer dual mining ETH and another coin UBiQ simultaneously with cpu mining myriad yesscript..With every version with very small adjustments it certainly does not come up with a version that can do more than other miners like Claymore.
Phoenixsminer is still based on the Genoil miner, even Ethminer has changed many times and starts much faster.
Therefore, wait a bit longer but come with a version 3.0 with a big change.


WiNEther Miner is a graphical interface to use with ethminer with advanced watchdog options and monitoring................. . .. Download : https://mirrorace.com/m/1qikt
janding
Newbie
*
Offline Offline

Activity: 137
Merit: 0


View Profile
April 28, 2018, 02:25:47 AM
 #1631

When 3.0?

Version 2.9.e works super it is too early for phoenixminer version 3.0.
it is possible with phoenixminer dual mining ETH and another coin UBiQ simultaneously with cpu mining myriad yesscript..With every version with very small adjustments it certainly does not come up with a version that can do more than other miners like Claymore.
Phoenixsminer is still based on the Genoil miner, even Ethminer has changed many times and starts much faster.
Therefore, wait a bit longer but come with a version 3.0 with a big change.


WiNEther Miner is a graphical interface to use with ethminer with advanced watchdog options and monitoring................. . .. Download : https://mirrorace.com/m/1qikt

When 3.0 ?
PhoenixMiner
Member
**
Offline Offline

Activity: 226
Merit: 13


View Profile
April 28, 2018, 06:38:24 AM
 #1632

Hi, can you update with an argument to make the fee act every 12 or 24hours?
You can enable the dev fee as soon as the miner starts for the equivalent time and then the miner run the specified hours without have to change DAG..
If you make it as argument, people can use it if want or not Smiley
   The DAG switches of the devfee can be avoided if you mine one of the supported coins (see the documentation of the -coin option in the first post). We will add a lot more ethash based coins in the next release. If the coin you want to mine is not supported yet, you can use -coin to choose a coin with smaller DAG for devfee.


Hello team,
Fast questions:

Is there a reason for this option to always be "0" ??

setx GPU_FORCE_64BIT_PTR 0

Are there any advantages if we set it to "1" instead?

Thank you for this excellent miner!
   In most cases this doesn't have any effect as the miner sets it internally to the optimal value. So, you don't even have to specify it any more in the .bat file. There is no harm in specifying it though and there might be cases where it can help.


Dr. PhoenixMiner,

Could you add the a little bit options to ur miner for Nvidia cards? Such as:
-fanmin
-fanmax
-tmax
-powlim
-cclock
-mclock

And one great option for AMD cards  -  enable compute mod by adding option -y into the bat? Not only typing key "y".

Claymore recently added these options. Next step is yours. I love ur miner for stability and hashrate. But I believe that these options can improve miner's positions.
  We are working on OC settings for Nvidia cards but they won't be ready for the next version. As for the -y option - it will probably be ready for the next version.


Hello Developer,

Great miner I/we really appreciate the work you have put into it.  With that said, I have been using PM since 2.2 I think, although I do like the auto -dcri feature Claymore uses now, so I do cheat every now and then and sneak back to Claymore, it's like an old dirty whore, you know, anyways end up going back, well maybe not, anyways, I digress...

I would like to request an expansion of a current feature.  Your -coin feature is great but I only solo mine to geth and with that said I typically solo mine the lower difficulty coins I think might have a shot of increasing in price, someday.  With that said, you do include a few good coins in your -coin feature but if you could include ALL coins on the Minerpool.net splash screen, that would be great!

https://minerpool.net/

This would provide a much greater DAG coverage for that feature, I know its pretty miner (pun intended) request but maybe someday, it would be nice to have more coverage.  Thanks again!
  The auto-tune functionality will be ready for PhoenixMiner 3.0, so we hope you'll have one less reason to ... umm, cheat Smiley As for the direct support for new ethash-based coins, yes, we will add support for pretty much everything from minerpool.net.

When 3.0 ?
  Not too soon because we have some big changes for this one.
Digital_Seytan
Newbie
*
Offline Offline

Activity: 133
Merit: 0


View Profile
April 28, 2018, 09:35:51 AM
 #1633

When 3.0 ?  Not too soon because we have some big changes for this one.

Hello Nvidia GPU users today new  update driver maby better try it

Version:   397.31  WHQL
Release Date:   2018.4.25
Operating System:   Windows 10 64-bit
Language:   English (US)
File Size:   471.06 MB

http://www.nvidia.com/download/driverResults.aspx/133648/en-us
MikeGR7
Newbie
*
Offline Offline

Activity: 36
Merit: 0


View Profile
April 28, 2018, 10:31:54 AM
 #1634

When 3.0 ?  Not too soon because we have some big changes for this one.

Hello Nvidia GPU users today new  update driver maby better try it

Version:   397.31  WHQL
Release Date:   2018.4.25
Operating System:   Windows 10 64-bit
Language:   English (US)
File Size:   471.06 MB

http://www.nvidia.com/download/driverResults.aspx/133648/en-us


PLEASE DO NOT TRY IT!
IT CAUSES BOOTLOOPS!

https://www.techpowerup.com/243684/nvidia-geforce-397-31-whql-drivers-put-gtx-1060-powered-systems-into-endless-restart-loop
LawrieUK
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
April 28, 2018, 02:20:49 PM
 #1635

When 3.0 ?  Not too soon because we have some big changes for this one.

Hello Nvidia GPU users today new  update driver maby better try it

Version:   397.31  WHQL
Release Date:   2018.4.25
Operating System:   Windows 10 64-bit
Language:   English (US)
File Size:   471.06 MB

http://www.nvidia.com/download/driverResults.aspx/133648/en-us


PLEASE DO NOT TRY IT!
IT CAUSES BOOTLOOPS!

https://www.techpowerup.com/243684/nvidia-geforce-397-31-whql-drivers-put-gtx-1060-powered-systems-into-endless-restart-loop

My first post so I may not be taking seriously but I installed the latest drivers on my 1070 rig and the hash rates dropped on all cards by ~10%

Anyone else had an issue, or even anyone with 1070's where its fine?
Digital_Seytan
Newbie
*
Offline Offline

Activity: 133
Merit: 0


View Profile
April 28, 2018, 03:02:56 PM
 #1636

When 3.0 ?  Not too soon because we have some big changes for this one.

Hello Nvidia GPU users today new  update driver maby better try it

Version:   397.31  WHQL
Release Date:   2018.4.25
Operating System:   Windows 10 64-bit
Language:   English (US)
File Size:   471.06 MB

http://www.nvidia.com/download/driverResults.aspx/133648/en-us


PLEASE DO NOT TRY IT!
IT CAUSES BOOTLOOPS!

https://www.techpowerup.com/243684/nvidia-geforce-397-31-whql-drivers-put-gtx-1060-powered-systems-into-endless-restart-loop

My first post so I may not be taking seriously but I installed the latest drivers on my 1070 rig and the hash rates dropped on all cards by ~10%

Anyone else had an issue, or even anyone with 1070's where its fine?

that's right with the new nvidia driver, the pool hashrate is much lower due to fewer shares.and phoenixminer crashes and starts again.what driver of nvidia works best with phoenix and the best shares. please report on the forum.
4play
Newbie
*
Offline Offline

Activity: 23
Merit: 0


View Profile
April 28, 2018, 03:51:37 PM
 #1637

I have drivers 388.43 and PhoenixMiner 2.9e (for now) and working perfect
NitriusX
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
April 28, 2018, 05:51:19 PM
 #1638

I see some use the pause at the end of their startup .bat file, what does that command do? And also is the setx commands needed?
pinamalina
Jr. Member
*
Offline Offline

Activity: 47
Merit: 1


View Profile
April 29, 2018, 07:59:47 AM
 #1639

I see some use the pause at the end of their startup .bat file, what does that command do? And also is the setx commands needed?

It allows to view the command output of the startup/restart script. It is particularly handy when the script fails or PhoenixMiner startup fails for debugging purposes.
MaxMidnite
Newbie
*
Offline Offline

Activity: 137
Merit: 0


View Profile
April 29, 2018, 01:07:18 PM
 #1640

To any Nvidia 1080 or 1080it owners check out OhgodETHlargement pill. its an app in background that supposedly can push you to around 54 mhs. I use amd so out of luck. Curious to see if it indeed affects PM hash rates. glta

I see you are a noob!
Pages: « 1 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 [82] 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 ... 194 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!