PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Myl0sh]

Hi, how can i start Phoenix miner with exe file like Claymore not with bat file.
In Claymore i use exe file to start miner with configured config file.
I need to start with exe because 3rd pary software.

Thanks

[1714032030]

1714032030

[1714032030]

1714032030

[UnclWish]

Кaкиe дpaйвepa нyжны для кapт AMД - блoкчeйнoвcкиe, пocлeдниe или кaкиe тo кoнкpeтныe вepcии?

Paбoтaю нa блoкчeйнoвcкиx. Paзницy c пocлeдними нe нaблюдaю

Toгдa кaкoй cмыcл cидeть нa дpeвниx дpaйвepax?

[Digital_Seytan]

Hello, Developer PM miner !
There's a new dual mining method described
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer PM 4.3.?  

Implementing ZIL mining in Phoenixminer new version dual will be great
Dear developer PM , I hope you will think about it

Dual ETH/ZIL would be enough to make me happy That would be great!

[biospb]

@PhoenixMiner, also please take a look on MTP algo. It looks very promising last few month but existing miners are very unstable especially for AMD cards. just a hint.

[Digital_Seytan]

Can someone help me ? I am using latest 4.2c on ubuntu and 6xRX580s . when I load the miner, GPU1 cannot load DAG because it only has 2.8G VRAM. How do I fix this ? Is there a way for me to use the onboard graphics  instead so it doesn't use my GPU?

-gpus <123 ..n> Use only the specified GPUs (if more than 10, separate the indexes with comma)

[biospb]

tested with wattmeter - v3 kernels on P104 work exactly as v2.

[pbfarmer]

Can someone help me ? I am using latest 4.2c on ubuntu and 6xRX580s . when I load the miner, GPU1 cannot load DAG because it only has 2.8G VRAM. How do I fix this ? Is there a way for me to use the onboard graphics  instead so it doesn't use my GPU?

use ubuntu server version, you won't use graphics at all

[bategojko74]

tested with wattmeter - v3 kernels on P104 work exactly as v2.

This could be a result from setting power limit with msi afterburner or other tool. Start decreasing the power gradually and you will find that at some percentage v2 will first drop performances a little bit but v3 will not at that percent.

[copper.beagle]

Wow. That's all I can say.

I'm new to mining, and just tried this out.  Instant 10% increase in my poolside hashrate, and my poolside hashrate average is actually higher than my client side reported hashrate at times, all without any stale shares.  This was well worth the dev fee.

Now to try and play with some of the other settings.
Thanks!

[styleshifter]

@PhoenixMiner: I started using version 4.2c this week. But the hashrate was much more unstable than before. Now I'm using the previous version again.

[bategojko74]

@PhoenixMiner: I started using version 4.2c this week. But the hashrate was much more unstable than before. Now I'm using the previous version again.

If you have nvidias add -mi 10 to your settings and it will work like previous version

[styleshifter]

@PhoenixMiner: I started using version 4.2c this week. But the hashrate was much more unstable than before. Now I'm using the previous version again.

If you have nvidias add -mi 10 to your settings and it will work like previous version

Thanks for your reply but I've got rx570. Does this setting help here, too?

[bategojko74]

@PhoenixMiner: I started using version 4.2c this week. But the hashrate was much more unstable than before. Now I'm using the previous version again.

If you have nvidias add -mi 10 to your settings and it will work like previous version

Thanks for your reply but I've got rx570. Does this setting help here, too?

I think that it will not help you. Strange, PM haven't said anything about modifying the AMD kernels in the new version.

[camchimonline]

What is this error? anyone help me.
Thank you!

2019.03.30:17:12:15.212: main Listening for CDM remote manager at port 21555 in full mode
2019.03.30:17:12:15.215: main GPU1: 46C 48%, GPU2: 44C 47%, GPU3: 40C 45%, GPU4: 40C 45%, GPU5: 39C 44%, GPU6: 38C 44%
2019.03.30:17:12:15.216: main Inavlid key sequence; please enter a single digit or three digits, starting with 0
2019.03.30:17:12:15.236: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x240ab15910d1873222f00142d0665c37929d5f77bbb251a47f165b35a623c82b","0x5c42fafe2a07497590d690901caeff5b8e990c9d27b6e4b2bbe0b7692ef6b0e6","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}
2019.03.30:17:12:15.256: eths Eth: New job #240ab159 from asia-etc.2miners.com:1010; diff: 8600MH
2019.03.30:17:12:15.258: GPU1 GPU1: Starting up... (0)
2019.03.30:17:12:15.258: GPU1 GPU1: Generating ethash light cache for epoch #258
2019.03.30:17:12:15.259: GPU2 GPU2: Starting up... (0)
2019.03.30:17:12:15.261: GPU3 GPU3: Starting up... (0)
2019.03.30:17:12:15.262: GPU4 GPU4: Starting up... (0)
2019.03.30:17:12:15.264: GPU5 GPU5: Starting up... (0)
2019.03.30:17:12:15.265: GPU6 GPU6: Starting up... (0)
2019.03.30:17:12:18.466: GPU1 Light cache generated in 3.2 s (15.0 MB/s)
2019.03.30:17:12:18.597: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xb2a634e54eecbdca14c5f915d43e9f3b4deb8784444e48bb17c251b15108bc06","0x5c42fafe2a07497590d690901caeff5b8e990c9d27b6e4b2bbe0b7692ef6b0e6","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}
2019.03.30:17:12:18.597: eths Eth: New job #b2a634e5 from asia-etc.2miners.com:1010; diff: 8600MH
2019.03.30:17:12:18.938: GPU1 GPU1: Allocating DAG (3.03) GB; good for epoch up to #260
2019.03.30:17:12:18.938: GPU1 GPU1: Allocating light cache buffer (48.5) MB; good for epoch up to #260
2019.03.30:17:12:19.208: GPU1 GPU1: Generating DAG for epoch #258
2019.03.30:17:12:19.338: GPU2 GPU2: Allocating DAG (3.03) GB; good for epoch up to #260
2019.03.30:17:12:19.338: GPU2 GPU2: Allocating light cache buffer (48.5) MB; good for epoch up to #260
2019.03.30:17:12:19.469: GPU2 GPU2: Generating DAG for epoch #258
2019.03.30:17:12:19.764: GPU3 GPU3: Allocating DAG (3.03) GB; good for epoch up to #260

[ManDoneKTM]

@PhoenixMiner i have this problem with latest version and 1 of 2 rigs . https://imgur.com/a/BI6pFuK

[UnclWish]

@PhoenixMiner: I started using version 4.2c this week. But the hashrate was much more unstable than before. Now I'm using the previous version again.

If you have nvidias add -mi 10 to your settings and it will work like previous version

Thanks for your reply but I've got rx570. Does this setting help here, too?

I think that it will not help you. Strange, PM haven't said anything about modifying the AMD kernels in the new version.

For my RX 580 nothing was changed in latest version. Speed is the same as was in previous.

[lesjokolat]

Hi folks thought I would share the results of my fan mod on Radeon VII and the results were really amazing!

https://youtu.be/LmEf9qP5GbE

Check out the video above. If I had better fans I would have been able to get even faster MH/s.

Regards

[Iamtutut]

Hi folks thought I would share the results of my fan mod on Radeon VII and the results were really amazing!

https://youtu.be/LmEf9qP5GbE

Check out the video above. Phoenix Miner was able to get to 110 MH/s. If I had better fans I would have been able maintain it longer but got a stable 108 MH/s.

Regards

Is it  with this https://bitcointalk.org/index.php?topic=5123724 or without ?

Your current HR is equivalent (even faster) to 2X Vega 64 with the on the fly mem tweak, that's really impressive.

[lesjokolat]

Hi folks thought I would share the results of my fan mod on Radeon VII and the results were really amazing!

https://youtu.be/LmEf9qP5GbE

Check out the video above. Phoenix Miner was able to get to 110 MH/s. If I had better fans I would have been able to get higher MH/s.

Regards

Is it  with this https://bitcointalk.org/index.php?topic=5123724 or without ?

Your current HR is equivalent (even faster) to 2X Vega 64 with the on the fly mem tweak, that's really impressive.

It is without the the vega mem tweak. I am also looking at some registry edits. that will allow greater under volting

[Iamtutut]

Then it's even more impressive, congrats !