|
UnclWish
|
 |
June 06, 2019, 07:38:46 AM |
|
Only new drivers support need to be updated. 19.4.3 is the last full supported at now by Phoenix miner.
Just updated to AMD driver version 19.5.2 (June 2019) 2766.5. Working again :-) You want to say that on 19.5.2 Phoenix woks with -clKernel 3? Yes. On a RX 580 8GB Just downloaded and updated to 19.5.2 from 3 june 2019 (OpenCL 2.1 AMD-APP 2841.5). Didn't work with -clKernel 3. Can you upload your driver for me? Offical AMD June driver: https[Suspicious link removed] As I wrote before: with driver 19.5.2 from 3 june 2019 (OpenCL 2.1 AMD-APP 2841.5) miner didn't work with -clKernel 3. It just give -cl error. Raise your virtual memory to NUMBER_OF_GPUS * 8 + 4 GB. It will surely work. My virtual memory is NUMBER_OF_GPUS * 8 + 8 GB. And on 19.4.3 all works. Miner didn't support new AMD-APP in 19.5.x drivers. And he wrote about that right after launch. |
|
|
|
|
|
|
|
Remember that Bitcoin is still beta software. Don't put all of your money into BTC!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
Dowper_
|
|
June 06, 2019, 11:07:44 AM
Last edit: June 06, 2019, 10:21:49 PM by Dowper_ |
|
Hello Guys ! does anyone knows how to deactivated auto-tune for phoenix miner ? I'm mining ETH on hiveOs and -gt 15 #doesn't work since it only set it to default value -gt <n> Set the GPU tuning parameter (6 to 400). The default is 15. You can change the
tuning parameter interactively with the '+' and '-' keys in the miner's console window.
If you don't specify -gt or you specify value 0, the miner will start auto-tuning to determine the best GT value for each GPU
what i want is to disable it completly. Thank you for your help. You cannot disable it, choose default parameter 15 if you want but I don't recommend that, what is the problem with determing the best value for every GPU? |
|
|
|
MoonDogg98
Newbie
 Offline
Activity: 5
Merit: 0
|
|
June 08, 2019, 01:02:39 PM |
|
My virtual memory is NUMBER_OF_GPUS * 8 + 8 GB. And on 19.4.3 all works. Miner didn't support new AMD-APP in 19.5.x drivers. And he wrote about that right after launch.
Did you see any improvements over 19.3.3 with 19.4.3? I was using 19.5.2 on claymore and switch to Phoenix and it was working but got an error on start up about unknown openCL and I had one card would fail after a few hours. I switched to 19.3.3 and now its rock solid. Rig : 2 MSI RX 570 4GB and 4 MSI RX570 8GB . 184.2MH/s |
|
|
|
|
|
UnclWish
|
|
June 08, 2019, 02:46:19 PM |
|
My virtual memory is NUMBER_OF_GPUS * 8 + 8 GB. And on 19.4.3 all works. Miner didn't support new AMD-APP in 19.5.x drivers. And he wrote about that right after launch.
Did you see any improvements over 19.3.3 with 19.4.3? I was using 19.5.2 on claymore and switch to Phoenix and it was working but got an error on start up about unknown openCL and I had one card would fail after a few hours. I switched to 19.3.3 and now its rock solid. Rig : 2 MSI RX 570 4GB and 4 MSI RX570 8GB . 184.2MH/s No, I think there is no difference in speed between 19.3.3 and 19.4.3. At least I'm didn't noticed any on my RX 580 8Gb cards. |
|
|
|
|
biospb
Newbie
Offline
Activity: 64
Merit: 0
|
|
June 08, 2019, 09:18:09 PM |
|
Please add support for amgpu-pro driver 19.10 2019.06.08:22:16:06.134: main Phoenix Miner 4.2c Linux/gcc - Release build
2019.06.08:22:16:06.138: main Unable to enum CUDA GPUs: no CUDA-capable device is detected
2019.06.08:22:16:06.240: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2019.06.08:22:16:06.240: main OpenCL platform: OpenCL 2.1 AMD-APP (2841.4)
2019.06.08:22:16:06.240: main Available GPUs for mining:
2019.06.08:22:16:06.240: main GPU1: Radeon RX Series (pcie 1), OpenCL 1.2, 8 GB VRAM, 32 CUs
2019.06.08:22:16:06.240: main GPU2: Radeon RX Series (pcie 2), OpenCL 1.2, 8 GB VRAM, 32 CUs
....
miner works, but during autotuning it spams log for about 3 minutes 2019.06.08:22:19:21.488: main Eth speed: 341.677 MH/s, shares: 10/0/0, time: 0:03
2019.06.08:22:19:23.652: GPU7 GPU7: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.652: GPU7 GPU7 is already in auto-tune process
2019.06.08:22:19:23.654: GPU1 GPU1: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.654: GPU1 GPU1 is already in auto-tune process
2019.06.08:22:19:23.701: GPU10 GPU10: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.701: GPU10 GPU10 is already in auto-tune process
2019.06.08:22:19:23.702: GPU2 GPU2: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.702: GPU2 GPU2 is already in auto-tune process
2019.06.08:22:19:23.703: GPU3 GPU3: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.703: GPU3 GPU3 is already in auto-tune process
2019.06.08:22:19:23.710: GPU4 GPU4: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.710: GPU4 GPU4 is already in auto-tune process
2019.06.08:22:19:23.711: GPU8 GPU8: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.711: GPU8 GPU8 is already in auto-tune process
2019.06.08:22:19:23.715: GPU11 GPU11: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.715: GPU11 GPU11 is already in auto-tune process
2019.06.08:22:19:23.716: GPU5 GPU5: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.716: GPU5 GPU5 is already in auto-tune process
2019.06.08:22:19:23.721: GPU9 GPU9: no -gt value specified, switching to auto-tune
2019.06.08:22:19:23.721: GPU9 GPU9 is already in auto-tune process
2019.06.08:22:19:23.764: GPU6 GPU6: no -gt value specified, switching to auto-tune
|
|
|
|
|
ManDoneKTM
Newbie
Offline
Activity: 150
Merit: 0
|
|
June 09, 2019, 07:18:49 AM |
|
My virtual memory is NUMBER_OF_GPUS * 8 + 8 GB. And on 19.4.3 all works. Miner didn't support new AMD-APP in 19.5.x drivers. And he wrote about that right after launch.
Did you see any improvements over 19.3.3 with 19.4.3? I was using 19.5.2 on claymore and switch to Phoenix and it was working but got an error on start up about unknown openCL and I had one card would fail after a few hours. I switched to 19.3.3 and now its rock solid. Rig : 2 MSI RX 570 4GB and 4 MSI RX570 8GB . 184.2MH/s No, I think there is no difference in speed between 19.3.3 and 19.4.3. At least I'm didn't noticed any on my RX 580 8Gb cards. vs 18.6.1 i have @ 5% more speed with it . |
|
|
|
|
Foxy4321
Newbie
Offline
Activity: 62
Merit: 0
|
|
June 09, 2019, 12:07:22 PM |
|
bat r9 280x coin DBIX core clock 1120Mhz memory clock 1490Mhz (modified BIOS) 27mh/s 120W
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -amd -acm -mi 13 -mode 1 -wdog 0 -pool dbix.pool.sexy:10032 -worker Terminator -wal 0x77ed808e7852cece6e996472fa9924dd50cd47e1 -pass 0000 -clkernel 2 -gser 2 -cvddc 1000
|
|
|
|
|
Ruul
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 09, 2019, 06:01:23 PM |
|
Could they get to put a new currency? they modified the ethash for their currency .. I guess they will have something similar to what ubiq did .. and I know you could get to put it on the list of coins to be able to mine with phoenix https://bitcointalk.org/index.php?topic=4906045 TEO (Trust Eth reOrigin) |
|
|
|
|
|
AlteregoX
|
|
June 10, 2019, 09:12:32 AM |
|
I'm mining on Nanopool, I've set up the -rate value to report the hash rate but the reported is still zero
What should I do?
|
|
|
|
|
agismaniax
Newbie
Offline
Activity: 49
Merit: 0
|
|
June 10, 2019, 09:20:44 AM |
|
Only new drivers support need to be updated. 19.4.3 is the last full supported at now by Phoenix miner.
Just updated to AMD driver version 19.5.2 (June 2019) 2766.5. Working again :-) You want to say that on 19.5.2 Phoenix woks with -clKernel 3? Yes. On a RX 580 8GB I'm using Nitro RX580 8GB, PhoenixMiner 4.2c, AMD Driver 19.3.3 with -clKernel 3, but it can not load DAG into VRAM with error clCreateBuffer -4. |
|
|
|
|
|
UnclWish
|
|
June 10, 2019, 11:24:10 AM |
|
Only new drivers support need to be updated. 19.4.3 is the last full supported at now by Phoenix miner.
Just updated to AMD driver version 19.5.2 (June 2019) 2766.5. Working again :-) You want to say that on 19.5.2 Phoenix woks with -clKernel 3? Yes. On a RX 580 8GB I'm using Nitro RX580 8GB, PhoenixMiner 4.2c, AMD Driver 19.3.3 with -clKernel 3, but it can not load DAG into VRAM with error clCreateBuffer -4. You did something wrong... Max AMD driver that miner have full support is 19.4.3. So just try to install 19.4.3. |
|
|
|
|
serialp
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 10, 2019, 02:55:14 PM |
|
Hello Guys ! does anyone knows how to deactivated auto-tune for phoenix miner ? I'm mining ETH on hiveOs and -gt 15 #doesn't work since it only set it to default value -gt <n> Set the GPU tuning parameter (6 to 400). The default is 15. You can change the
tuning parameter interactively with the '+' and '-' keys in the miner's console window.
If you don't specify -gt or you specify value 0, the miner will start auto-tuning to determine the best GT value for each GPU
what i want is to disable it completly. Thank you for your help. You cannot disable it, choose default parameter 15 if you want but I don't recommend that, what is the problem with determing the best value for every GPU? Hey ! Than you for your feedback, it's just because after trying all the good timings with amdmemtweak developped by Eliovp on my rigs i got frequently the watchdoog issue with phoenixminer reboot failure. That's why i wanted to test it without the auto-tune |
|
|
|
|
|
UnclWish
|
|
June 10, 2019, 06:21:20 PM |
|
Allready AMD 19.6.1 driver released... And no miner update... If author dropped support of his miner, he can write about this... Maybe we are waiting for nothing?
|
|
|
|
|
Soliqesh
Newbie
Offline
Activity: 48
Merit: 0
|
|
June 10, 2019, 08:04:24 PM |
|
Lol, same hashrate, same stable after 18.6.1 ... Stop annoying in chat about drivers.
|
|
|
|
|
ManDoneKTM
Newbie
Offline
Activity: 150
Merit: 0
|
|
June 10, 2019, 09:01:34 PM |
|
Allready AMD 19.6.1 driver released... And no miner update... If author dropped support of his miner, he can write about this... Maybe we are waiting for nothing?
+1 . AGREE !!! |
|
|
|
|
Kokum
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 13, 2019, 09:50:38 AM |
|
Hi,
I am using 4.2c on linux (Ethos). It seems fan control options do not work. Simply nothing changes if I set -tt, -fanmin, -fanmax. Also setting -fcm 2 also does not help - think it always uses vbios settings. No errors in the log. How can I investigate?
Thanks.
|
|
|
|
|
|
laik2
|
|
June 13, 2019, 09:58:17 AM |
|
Hi,
I am using 4.2c on linux (Ethos). It seems fan control options do not work. Simply nothing changes if I set -tt, -fanmin, -fanmax. Also setting -fcm 2 also does not help - think it always uses vbios settings. No errors in the log. How can I investigate?
Thanks.
I don't think fan management ever worked on linux, just fan reporting. |
|
|
|
|
UnclWish
|
|
June 15, 2019, 11:07:34 AM |
|
Windows 10 1903 version requires AMD drivers 19.5.2 or higher to work correctly... 19.4.3 works but not without bugs.
Phoenix, will you update your miner to full support AMD drivers higher than 19.4.3? Or we would forced to use other miners...
|
|
|
|
|
|
|
|
TheHas
|
|
June 16, 2019, 10:18:27 AM |
|
Author disappeared...
LOL last time online was today. How you came to the conclusion that the author is disappeared? I checked a few days ago and the last time when he was online was about a month ago. So it's good to see he is been online today. His miner still works for most people. A few competitors have new miners if you want to try those. I don't think frequency on bitcointalk translates to the quality of the miner! Phoenix miner works great for me. |
|
|
|
|
|
