PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Yirvenpaeae]

Hy,

I'm new at Phoenix, Hashrate is lower than on claymore but it works. So I try for dual mining, but didn't get a hashrate on the secand coin.
Copy the command line from the readme for dual mining and added my adresses.
Any tips, thx

[1713503481]

1713503481

[1713503481]

1713503481

[1713503481]

1713503481

[1713503481]

1713503481

[miner29]

Hy,

I'm new at Phoenix, Hashrate is lower than on claymore but it works. So I try for dual mining, but didn't get a hashrate on the secand coin.
Copy the command line from the readme for dual mining and added my adresses.
Any tips, thx

What are you trying to dual mine....some coins like zil only mine for a short period every few hours.

[miner29]

DID anyone GET A SOLUTION for this:

ETH: CONNECTING TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (PROTO: ETHPROXY)

ETH: CONNECTED TO ETHASH POOL EU1.ETHERMINE.ORG:4444  (172.65.207.109)

POOL LOGIN FAILED: INVALID JSON REQUEST

ETH: RECONNECTING IN 5 SECONDS...

LISTENING FOR CDM REMOTE MANAGER AT PORT 3333 IN READ ONLY MODE




Any idea how to resolve this?

I get it on ethermine / sparkpool / nanopool

without your commandline, your os, what cards, and so on, no one can help you.

Miner doesn't work on nonencrypted port 4444. Use ssl://eu1.ethermine.org:5555

Really.....my rigs on PM work fine on port 4444 to ethermine.org...    You sir are a wealth of bad information. 

[2020-12-02 17:24:49][info][miner/0]: Eth: New job #be243d14 from us1.ethermine.org:4444; diff: 4000MH                                                                      │
│[2020-12-02 17:24:51][info][miner/0]: Eth speed: 151.457 MH/s, shares: 4313/1/0, time: 32:04                                                                                │
│[2020-12-02 17:24:51][info][miner/0]: GPUs: 1: 44.950 MH/s (1313) 2: 53.249 MH/s (1508) 3: 53.258 MH/s (1493)                                                               │
│[2020-12-02 17:24:53][info][miner/0]: Eth: New job #a76b64e6 from us1.ethermine.org:4444; diff: 4000MH                                                                      │
│[2020-12-02 17:24:56][info][miner/0]: Eth speed: 151.517 MH/s, shares: 4313/1/0, time: 32:04                                                                                │
│[2020-12-02 17:24:56][info][miner/0]: GPUs: 1: 45.008 MH/s (1313) 2: 53.250 MH/s (1508) 3: 53.259 MH/s (1493)                                                               │
│[2020-12-02 17:24:57][info][miner/0]: Eth: New job #29bf7880 from us1.ethermine.org:4444; diff: 4000MH                                                                      │
│[2020-12-02 17:24:59][info][miner/1]: [2020-12-02 17:24:58] : New block detected.                                                                                           │
│[2020-12-02 17:25:01][info][miner/0]: Eth: New job #c4b70bee from us1.ethermine.org:4444; diff: 4000MH                                                                      │
│[2020-12-02 17:25:01][info][miner/0]: Eth speed: 151.570 MH/s, shares: 4313/1/0, time: 32:04       

[GoblinCBR]

SO , I`m using the last version of Phoenix miner (5.3b) and some blockchain drivers (17,4 - I think) for my AMD $X 470 . But I cannot undervolt my cards and they drain a lot of power from the wall . With almost 200w more than claymore used . How can I fix this ? Thanks

[kaiokenx10]

windows 10 version 2004
amd driver 20.3.1
latest phoenix miner
two rigs both with 2 radeon VIIs

at dag switch to 379 both rigs went from 83 mHash per card to 75 mhash per card
the gt value was 50 on all cards
so re-ran phoenix and got new gt value of 6
but cards only recovered to 80.5 mhash

so the radeon VIIs have lost a little hash.
there was defintely some weirdness at dag switch over.
would love to get those missing hashes back. is driver 20.3.1 the problem??
great work phoenix . thank you for your time sorting these issues for us all.

same things with vegas, we have to wait on phoenix

hopefully he resolves it soon

[vTorus]

two rigs stopped working today, sapphire nitro+ 8gb

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #379 (3.96) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).

win7 64bit, blockchain beta drivers
restored original bios, installed 20.4.2., same thing
let us know if you manage to fix it, thanks

how much virtual ram?
test another miner like teamred and if it is run, let us know and we look again.
add -eres 0 for test

change os to win10.

Same problem here:

2020.12.02:20:35:03.557: GPU1 Light cache generated in 4.4 s (14.5 MB/s)
2020.12.02:20:35:04.097: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.12.02:20:35:04.097: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
2020.12.02:20:35:04.368: GPU2 GPU2: Free VRAM: 7.948 GB; used: 0.052 GB
2020.12.02:20:35:04.368: GPU2 GPU2: Allocating DAG for epoch #379 (3.96) GB
2020.12.02:20:35:04.368: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.02:20:35:04.368: wdog Fatal error detected. Restarting.
2020.12.02:20:35:06.099: GPU3 GPU3: Free VRAM: 7.948 GB; used: 0.052 GB
2020.12.02:20:35:06.099: GPU3 GPU3: Allocating DAG for epoch #379 (3.96) GB
2020.12.02:20:35:06.099: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).


RX480 8GB VRAM 30GB TO 50GB

But with teamred is running!

https://ibb.co/Y0fdZVQ

[Yirvenpaeae]

Hy,

I'm new at Phoenix, Hashrate is lower than on claymore but it works. So I try for dual mining, but didn't get a hashrate on the secand coin.
Copy the command line from the readme for dual mining and added my adresses.
Any tips, thx

What are you trying to dual mine....some coins like zil only mine for a short period every few hours.

Hi,

Blake2s

ETH on ethermine.org ETH, Blake2s on Nicehash:
      PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s

B2S New Jobs getting in but speed is always zero. ETH Speed is on 39MH/s on vega 56, with claymore it was 41.That's OK for me and it looks stable.
thx

[damco26]

Can someone report hashrate for AMD RX 570/580 4Gb on linux or windows 7 ?
 Is bigger or the same than on Win10 ? Today i have only 22Mhz...

Thankyou!

[skinnyfalcon]

Is there anyone using the latest Windows 10 and and updates running PM 5.3b on a 580 (moded bios) rig not restarting constantly please share their config file settings?

I have tried lowering clock speed, mining intensity, larger virtual mem but nothing seems to improve the stability. I miss the days when the rig would run for days without restarting. Now i would be lucky to get a full hour before the damn thing restarting again and again.  

[skinnyfalcon]

Can someone report hashrate for AMD RX 570/580 4Gb on linux or windows 7 ?
 Is bigger or the same than on Win10 ? Today i have only 22Mhz...

Thankyou!

I have 8Gb 580/570 on Win 10 and they range from 29-31 MH, never used 4Gb cards not sure what the hash speed difference would be.

[bassistas]

  Hawaii GPUs need modified kernels to continue working with the larger DAGs, we just haven't had the time to make it. For now you can use -clkernel 0 to use the generic kernels - they will be slower, and you also should set -mi 10 or -mi 11 to decrease the stale shares. Another option is to mine ETC, where the DAG is much smaller but with the current profitability you are probably better with mining ETH with generic kernels.

If this is true then why gminer or nanominer still works on my R9 390 and without any speed reduction (30mh/s) on ETH?

[damco26]

Can someone report hashrate for AMD RX 570/580 4Gb on linux or windows 7 ?
 Is bigger or the same than on Win10 ? Today i have only 22Mhz...

Thankyou!

I have 8Gb 580/570 on Win 10 and they range from 29-31 MH, never used 4Gb cards not sure what the hash speed difference would be.

Now is big different.... cards with 4Gb slowly dying at ethereum mining.... Dag size is too big

[Jonet]

Can someone report hashrate for AMD RX 570/580 4Gb on linux or windows 7 ?
 Is bigger or the same than on Win10 ? Today i have only 22Mhz...

Thankyou!

I have 8Gb 580/570 on Win 10 and they range from 29-31 MH, never used 4Gb cards not sure what the hash speed difference would be.

RX580 4Gb about 30MH/s Phoenix on Linux. And I know it's not the best BIOS as Claymore with -strap was 1-2 MH/s faster under Windows.

[miner29]

Hy,

I'm new at Phoenix, Hashrate is lower than on claymore but it works. So I try for dual mining, but didn't get a hashrate on the secand coin.
Copy the command line from the readme for dual mining and added my adresses.
Any tips, thx

What are you trying to dual mine....some coins like zil only mine for a short period every few hours.

Hi,

Blake2s

ETH on ethermine.org ETH, Blake2s on Nicehash:
      PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s

B2S New Jobs getting in but speed is always zero. ETH Speed is on 39MH/s on vega 56, with claymore it was 41.That's OK for me and it looks stable.
thx

Wondering if its NH that is giving the issue.  Have you tried a Black2s pool instead of NH?  Even if just to confirm/deny its NH.
  
As for Vega 56 on PM im getting 47.76mhs on one and 49.21mhs  on another.  (first one is a rev 1 vega but both are air boost).  Wattage is around 0.812mv so about 115watts
 core 1003 / mem 940 on mmpos

[yorics]

hi all this is my bat file, I want to ask what is -proto 3
is it neccesary ? I have 2 1070 nvidia and 3 RX 580 all 8 gb


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)
PhoenixMiner.exe -pool //eu1.ethermine.org:4444  -wal 0xbutkhg756gnfkhnkh56t87ng.rigname -proto 3
pause

[damco26]

Can someone report hashrate for AMD RX 570/580 4Gb on linux or windows 7 ?
 Is bigger or the same than on Win10 ? Today i have only 22Mhz...

Thankyou!

I have 8Gb 580/570 on Win 10 and they range from 29-31 MH, never used 4Gb cards not sure what the hash speed difference would be.

RX580 4Gb about 30MH/s Phoenix on Linux. And I know it's not the best BIOS as Claymore with -strap was 1-2 MH/s faster under Windows.

Which linux are you using ?

[Jonet]

Can someone report hashrate for AMD RX 570/580 4Gb on linux or windows 7 ?
 Is bigger or the same than on Win10 ? Today i have only 22Mhz...

Thankyou!

I have 8Gb 580/570 on Win 10 and they range from 29-31 MH, never used 4Gb cards not sure what the hash speed difference would be.

RX580 4Gb about 30MH/s Phoenix on Linux. And I know it's not the best BIOS as Claymore with -strap was 1-2 MH/s faster under Windows.

Which linux are you using ?

Ubuntu 20.04.1 LTS Server

[Jonet]

Both 5.2e and 5.1c sometimes detect one extra card

.....

There are 6 cards in this rig so GPU 1 and GPU 2 is the same card. Needless to say this does not end well

So far I have managed to run 5.1c over some time but not 5.2e
Windows 10

    Most probably mixed-up drivers. Remove the drivers with DDU, then check if they are really removed - they should be listed only as "Microsoft Basic Display Adapter" not as Radeon .... If necessary, run DDU again until you see only "Microsoft Basic Display Adapter"s in the Device Manager, only then install the new drivers.

I suspect this problem is related to how the latest Windows 10 build(s) deals with "Microsoft Remote Display Adapter" when connecting through RDP. I've seen this problem with more then one version of the AMD driver and both in PhoenixMiner and Claymore. All is fine if I reboot the miner and do not connect to it until after mining has started. But if I start the miner after logging in with RDP it will detect 2 GPUS on PCIe 1.
This issue can probably be solved in the miner but I suppose it's not of high importance.

[kaiokenx10]

Hy,

I'm new at Phoenix, Hashrate is lower than on claymore but it works. So I try for dual mining, but didn't get a hashrate on the secand coin.
Copy the command line from the readme for dual mining and added my adresses.
Any tips, thx

What are you trying to dual mine....some coins like zil only mine for a short period every few hours.

Hi,

Blake2s

ETH on ethermine.org ETH, Blake2s on Nicehash:
      PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s

B2S New Jobs getting in but speed is always zero. ETH Speed is on 39MH/s on vega 56, with claymore it was 41.That's OK for me and it looks stable.
thx

Wondering if its NH that is giving the issue.  Have you tried a Black2s pool instead of NH?  Even if just to confirm/deny its NH.
  
As for Vega 56 on PM im getting 47.76mhs on one and 49.21mhs  on another.  (first one is a rev 1 vega but both are air boost).  Wattage is around 0.812mv so about 115watts
 core 1003 / mem 940 on mmpos

could you share full details on your settings?

[ummasek]

Hi.

Just want to say THANK YOU to the @PhoenixMiner Devs for their work and support here.
I used Claymore before because it gives me the highest possible hashrates but got DAG generation errors the last days on three RX570 8GB.
First setting -eres 1 worked a few days with Claymore, then i had to set -eres 0 a few days later and at least it did not work anymore.

Now switched to PhoenixMiner 5.3b and it works fine after some tuning at the same speed.
89W , 1400rpm , 64°C , 30.5MH/s , cclock 1284 MHz , cvddc 900 mV , mclock 2050 MHz each of the GPUs (installed in a bigtower case, win10, Radeon 20.4.2)

Great work!
bye Claymore & hello Phoenix.


maybe its helpful for someone, my configfile:

Code:

-pool ssl://eu1.ethermine.org:5555
-wal <<walletaddress>>
-worker MININGPC

-hstats 2
-mode 1
-gswin 10

-fanmin 30
-tt 66
-ttli 68
-tstop 70
-tstart 50

-mt 1
-coin eth
-mi 14
-gt 44
-cvddc 900
-rxboost 20

Try to rise memclock a little. With core that high, it should hash a lot more.
I`m getting 30.4 at core 1100 memclock 2050 with Vcore 0,75 (micron) and 0,85 (samsung)