catfish78
Newbie
Offline
Activity: 142
Merit: 0
|
|
December 03, 2020, 04:25:40 PM |
|
SO , I`m using the last version of Phoenix miner (5.3b) and some blockchain drivers (17,4 - I think) for my AMD $X 470 . But I cannot undervolt my cards and they drain a lot of power from the wall . With almost 200w more than claymore used . How can I fix this ? Thanks
It' not possible to undervolt with old blockchain driver! AB or miner can't do a sh*t to undervolt... and you can't use OverdriveNTool with old driver. Solution: 1) update windows and use newer driver like 20.11.1 2) use SMOS Thanks for answering . Tried the 20.11 driver and it mines with 9-10 mh so I switched back to the old driver which does 29-30 Smiley Any update from Phoenix on this errors ? Thanks in advance 20.11.1 and any other graphic driver are not in compute mode by default! (blockchain driver is) You must set every single GPU to compute mode using Radeon settings or all at once using little program like AMD-Compute-Switcher.exe
|
|
|
|
ivomm
Legendary
Offline
Activity: 1885
Merit: 3078
All good things to those who wait
|
|
December 03, 2020, 05:00:58 PM |
|
Nanominer has nearly 15% of stale shares on pool stats, gminer is better and it still works on 4gb r9 290 at full speed. Hope PhoenixMiner can be fixed to work again on r9 390, i dont ask for 290, not so much time left for then on eth. I like his fan control in linux and ethman statistics so wait for update!
You are right about the stale shares of nanominer. But for some reason gminer is not producing an accepted share for any of my 390's under smos. It may be related to opencl version 18.20 or it needs root access, I don't know. I can't test now under hiveos, where the opencl is 19.20. Any suggestions?
|
|
|
|
GoblinCBR
Newbie
Offline
Activity: 5
Merit: 0
|
|
December 03, 2020, 06:43:08 PM |
|
SO , I`m using the last version of Phoenix miner (5.3b) and some blockchain drivers (17,4 - I think) for my AMD $X 470 . But I cannot undervolt my cards and they drain a lot of power from the wall . With almost 200w more than claymore used . How can I fix this ? Thanks
It' not possible to undervolt with old blockchain driver! AB or miner can't do a sh*t to undervolt... and you can't use OverdriveNTool with old driver. Solution: 1) update windows and use newer driver like 20.11.1 2) use SMOS Thanks for answering . Tried the 20.11 driver and it mines with 9-10 mh so I switched back to the old driver which does 29-30 Smiley Any update from Phoenix on this errors ? Thanks in advance 20.11.1 and any other graphic driver are not in compute mode by default! (blockchain driver is) You must set every single GPU to compute mode using Radeon settings or all at once using little program like AMD-Compute-Switcher.exe I already tried with that little program , but maybe I need to restart the rig after I put them in compute mode . Gonna try again tommorow . Thanks for the tip
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 08:07:28 PM |
|
it was. Now rtx 3060TI best mining for eth. 63Mhs for 120w
If we apply the rule of 3 simples, I think 90Watts for 54,1MH is better than 120Watts for 63MH. What is that rule ? if you dont know nothing. I doubt that 5700 will stay stable at 90w giving 54mhs ok lets say it is stable at 90w giving you. Todays profit you will be making 1.96-0.2=1.76$ with 5700 And with 63mhs at 120w 2.29-0.27=2.02$. with 3060ti. as soon as prices go down 3060ti will be beast ethereum minng card Instead writing something make little reasearch and calculation mhs watts,
|
|
|
|
agente
|
|
December 03, 2020, 08:10:12 PM |
|
it was. Now rtx 3060TI best mining for eth. 63Mhs for 120w
If we apply the rule of 3 simples, I think 90Watts for 54,1MH is better than 120Watts for 63MH. What is that rule ? if you dont know nothing. I doubt that 5700 will stay stable at 90w giving 54mhs ok lets say it is stable at 90w giving you. Todays profit you will be making 1.96-0.2=1.76$ with 5700 And with 63mhs at 120w 2.29-0.27=2.02$. with 3060ti. as soon as prices go down 3060ti will be beast ethereum minng card Instead writing something make little reasearch and calculation mhs watts, 90 in gpuz. still difficult to understand that AMD use a lot of power from pcie after many years..
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 08:22:34 PM |
|
it was. Now rtx 3060TI best mining for eth. 63Mhs for 120w
If we apply the rule of 3 simples, I think 90Watts for 54,1MH is better than 120Watts for 63MH. What is that rule ? if you dont know nothing. I doubt that 5700 will stay stable at 90w giving 54mhs ok lets say it is stable at 90w giving you. Todays profit you will be making 1.96-0.2=1.76$ with 5700 And with 63mhs at 120w 2.29-0.27=2.02$. with 3060ti. as soon as prices go down 3060ti will be beast ethereum minng card Instead writing something make little reasearch and calculation mhs watts, 90 in gpuz. still difficult to understand that AMD use a lot of power from pcie after many years.. yes i understand that it doesn matter 3060 still will be beating.if take ratio will be the same like this 5700 126w at the wall will be 1.96-0.3=1.69$ for 5700 and for 3060 TI 168w 2.29-0.37=1.92$. Result is same because 90 vs 120 doesnt make much difference at the wall.
|
|
|
|
agente
|
|
December 03, 2020, 08:34:42 PM |
|
it was. Now rtx 3060TI best mining for eth. 63Mhs for 120w
If we apply the rule of 3 simples, I think 90Watts for 54,1MH is better than 120Watts for 63MH. What is that rule ? if you dont know nothing. I doubt that 5700 will stay stable at 90w giving 54mhs ok lets say it is stable at 90w giving you. Todays profit you will be making 1.96-0.2=1.76$ with 5700 And with 63mhs at 120w 2.29-0.27=2.02$. with 3060ti. as soon as prices go down 3060ti will be beast ethereum minng card Instead writing something make little reasearch and calculation mhs watts, 90 in gpuz. still difficult to understand that AMD use a lot of power from pcie after many years.. yes i understand that it doesn matter 3060 still will be beating.if take ratio will be the same like this 5700 126w at the wall will be 1.96-0.3=1.69$ for 5700 and for 3060 TI 168w 2.29-0.37=1.92$. Result is same because 90 vs 120 doesnt make much difference at the wall. beleive me.. it's important! I'm mining since 2013 you don't have to focus on today's earnings. Now even a 390 is profitable
|
|
|
|
igor324s
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 03, 2020, 09:01:47 PM |
|
@ Mr.Phoenix please check this out. it happens when Devfee tries to connect after 20 hours mining.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
I had so. After installing the AMD drivers, the HIDDEN mspng file (maybe another) clung to the startup treated as follows: 1 - deleted from startup 2- deleted from the task scheduler 2a reboot 3- search and delete computer files
|
|
|
|
Kiawpqe
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
December 03, 2020, 09:28:32 PM Last edit: December 03, 2020, 09:59:55 PM by Kiawpqe |
|
I would really love to see a screen shot of ANYONE that can pump out more than 30 MH/card on (12+ per rig) RX 580 cards and hash stable for more than 24 hrs. No matter what I try it just will not happen. As soon as I push to 30 or higher, the rig will start to crash. I used to tune individual cards and get higher hash rate but that function has been broken since forever ago. So I would really love to see if anyone out there is actually able to achieve this.
Here You Go man: My 12 Card RIG with 8* RX580 8GB, RX5700, 3* RX5700XT PM 5.3b 7x RX 580 8Gb 20.11.1 *** 27:10 *** 12/3 22:24 ************************************** Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 1:37 Eth: Accepted shares 5305 (0 stales), rejected shares 1 (0 stales) Eth: Incorrect shares 1 (0.02%), est. stales percentage 0.00% Eth: Maximum difficulty of found share: 28.0 TH (!!!) Eth: Average speed (5 min): 220.856 MH/s Eth: Effective speed: 216.96 MH/s; at pool: 216.92 MH/s Eth: New job #3a52db6c from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth speed: 219.310 MH/s, shares: 5305/1/1, time: 27:10 GPUs: 1: 32.311 MH/s (773) 2: 32.228 MH/s (792) 3: 32.392 MH/s (784) 4: 25.770 MH/s (644/1) 5: 32.318 MH/s (804) 6: 32.305 MH/s (740) 7: 31.985 MH/s (769) Eth: New job #f0cc29f9 from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth: New job #d7661bb9 from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth: New job #188de1da from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth speed: 218.682 MH/s, shares: 5305/1/1, time: 27:10 GPUs: 1: 31.910 MH/s (773) 2: 32.020 MH/s (792) 3: 32.232 MH/s (784) 4: 25.931 MH/s (644/1) 5: 32.300 MH/s (804) 6: 32.305 MH/s (740) 7: 31.985 MH/s (769) Eth: New job #aa2608da from ssl://eu1.ethermine.org:5555; diff: 4000MH GPU1: 57C 41% 83W, GPU2: 61C 45% 94W, GPU3: 61C 46% 89W, GPU4: 61C 51% 77W, GPU5: 57C 45% 84W, GPU6: 57C 44% 82W, GPU7: 61C 51% 93W GPU1: cclock 1190 MHz, cvddc 875 mV, mclock 2110 MHz GPU2: cclock 1190 MHz, cvddc 875 mV, mclock 2097 MHz GPU3: cclock 1190 MHz, cvddc 875 mV, mclock 2110 MHz GPU4: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz GPU5: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz GPU6: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz GPU7: cclock 1190 MHz, cvddc 875 mV, mclock 2097 MHz GPUs power: 601.4 W; cost: 2.02 USD/day https://imgur.com/a/FcDuJHA
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 09:57:29 PM |
|
@ Mr.Phoenix please check this out. it happens when Devfee tries to connect after 20 hours mining.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
I had so. After installing the AMD drivers, the HIDDEN mspng file (maybe another) clung to the startup treated as follows: 1 - deleted from startup 2- deleted from the task scheduler 2a reboot 3- search and delete computer files thank you for help. i couldnt find that thing on startup. there nvpn.exe which is belongs to intel graphics. What is the name?
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 09:59:48 PM |
|
I would really love to see a screen shot of ANYONE that can pump out more than 30 MH/card on (12+ per rig) RX 580 cards and hash stable for more than 24 hrs. No matter what I try it just will not happen. As soon as I push to 30 or higher, the rig will start to crash. I used to tune individual cards and get higher hash rate but that function has been broken since forever ago. So I would really love to see if anyone out there is actually able to achieve this.
Here You Go man: My 12 Card RIG with 8* RX580 8GB, RX5700, 3* RX5700XT PM 5.3b 7x RX 580 8Gb 20.11.1 *** 27:10 *** 12/3 22:24 ************************************** Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 1:37 Eth: Accepted shares 5305 (0 stales), rejected shares 1 (0 stales) Eth: Incorrect shares 1 (0.02%), est. stales percentage 0.00% Eth: Maximum difficulty of found share: 28.0 TH (!!!) Eth: Average speed (5 min): 220.856 MH/s Eth: Effective speed: 216.96 MH/s; at pool: 216.92 MH/s Eth: New job #3a52db6c from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth speed: 219.310 MH/s, shares: 5305/1/1, time: 27:10 GPUs: 1: 32.311 MH/s (773) 2: 32.228 MH/s (792) 3: 32.392 MH/s (784) 4: 25.770 MH/s (644/1) 5: 32.318 MH/s (804) 6: 32.305 MH/s (740) 7: 31.985 MH/s (769) Eth: New job #f0cc29f9 from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth: New job #d7661bb9 from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth: New job #188de1da from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth speed: 218.682 MH/s, shares: 5305/1/1, time: 27:10 GPUs: 1: 31.910 MH/s (773) 2: 32.020 MH/s (792) 3: 32.232 MH/s (784) 4: 25.931 MH/s (644/1) 5: 32.300 MH/s (804) 6: 32.305 MH/s (740) 7: 31.985 MH/s (769) Eth: New job #aa2608da from ssl://eu1.ethermine.org:5555; diff: 4000MH GPU1: 57C 41% 83W, GPU2: 61C 45% 94W, GPU3: 61C 46% 89W, GPU4: 61C 51% 77W, GPU5: 57C 45% 84W, GPU6: 57C 44% 82W, GPU7: 61C 51% 93W GPU1: cclock 1190 MHz, cvddc 875 mV, mclock 2110 MHz GPU2: cclock 1190 MHz, cvddc 875 mV, mclock 2097 MHz GPU3: cclock 1190 MHz, cvddc 875 mV, mclock 2110 MHz GPU4: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz GPU5: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz GPU6: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz GPU7: cclock 1190 MHz, cvddc 875 mV, mclock 2097 MHz GPUs power: 601.4 W; cost: 2.02 USD/day why GPU 4 is 25.93?
|
|
|
|
Kiawpqe
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
December 03, 2020, 10:01:34 PM |
|
GPU4 POWERCOLOR RX-580 8GB with pc monitor https://imgur.com/a/FcDuJHA3 x Msi rx 580 8gb=32,7mh/s BIOSMOD 3 x xfx 580 8gb=32,5mh/s NO BIOSMOD (DUAL BIOS W/ MINING BIOS stock) 1 Powercolor 580 8gb 26mh/s (w/ monitor) NO BIOSMOD
|
|
|
|
igor324s
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 03, 2020, 10:08:55 PM Last edit: December 03, 2020, 10:30:14 PM by igor324s |
|
@ Mr.Phoenix please check this out. it happens when Devfee tries to connect after 20 hours mining.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
I had so. After installing the AMD drivers, the HIDDEN mspng file (maybe another) clung to the startup treated as follows: 1 - deleted from startup 2- deleted from the task scheduler 2a reboot 3- search and delete computer files thank you for help. i couldnt find that thing on startup. there nvpn.exe which is belongs to intel graphics. What is the name? he himself could not understand for a long time. drivers used only official ... remove nvpn.exe from startup, from the scheduler. Reboot and search and delete from all files .... I apologize for my English
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 10:28:35 PM |
|
@ Mr.Phoenix please check this out. it happens when Devfee tries to connect after 20 hours mining.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
I had so. After installing the AMD drivers, the HIDDEN mspng file (maybe another) clung to the startup treated as follows: 1 - deleted from startup 2- deleted from the task scheduler 2a reboot 3- search and delete computer files thank you for help. i couldnt find that thing on startup. there nvpn.exe which is belongs to intel graphics. What is the name? I'm Igor. he himself could not understand for a long time. drivers used only official ... I apologize for my English i can speak 4 languages. English Russian Turkish. Write which is best for you. Thanks
|
|
|
|
Kiawpqe
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
December 03, 2020, 10:36:43 PM |
|
try ETC
*** 0:21 *** 11/29 21:57 ************************************** Eth: Mining ETC on ssl://eu1-etc.ethermine.org:5555 for 0:21 Eth: Accepted shares 75 (0 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% Eth: Maximum difficulty of found share: 16.9 TH (!!!) Eth: Average speed (5 min): 224.131 MH/s Eth: Effective speed: 237.15 MH/s; at pool: 237.15 MH/s
Eth speed: 224.239 MH/s, shares: 75/0/0, time: 0:21 GPUs: 1: 32.731 MH/s (Cool 2: 32.509 MH/s (9) 3: 32.696 MH/s (11) 4: 28.326 MH/s (15) 5: 32.732 MH/s (11) 6: 32.734 MH/s (14) 7: 32.510 MH/s (7) GPU1: 61C 44% 86W, GPU2: 61C 62% 96W, GPU3: 61C 53% 92W, GPU4: 61C 59% 87W, GPU5: 61C 40% 87W, GPU6: 61C 48% 85W, GPU7: 61C 64% 96W GPU1: cclock 1190 MHz, cvddc 875 mV, mclock 2110 MHz MSI RX 580 8gb GPU2: cclock 1190 MHz, cvddc 875 mV, mclock 2097 MHz XFX 580 8GB GPU3: cclock 1190 MHz, cvddc 875 mV, mclock 2110 MHz XFX 580 8GB GPU4: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz POWER-COLOR RX-580 8gb GPU5: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz MSI RX 580 8gb GPU6: cclock 1190 MHz, cvddc 875 mV, mclock 2112 MHz MSI RX 580 8gb GPU7: cclock 1190 MHz, cvddc 875 mV, mclock 2097 MHz XFX 580 8GB GPUs power: 628.3 W; cost: 2.26 USD/day
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 10:37:09 PM |
|
it was. Now rtx 3060TI best mining for eth. 63Mhs for 120w
If we apply the rule of 3 simples, I think 90Watts for 54,1MH is better than 120Watts for 63MH. What is that rule ? if you dont know nothing. I doubt that 5700 will stay stable at 90w giving 54mhs ok lets say it is stable at 90w giving you. Todays profit you will be making 1.96-0.2=1.76$ with 5700 And with 63mhs at 120w 2.29-0.27=2.02$. with 3060ti. as soon as prices go down 3060ti will be beast ethereum minng card Instead writing something make little reasearch and calculation mhs watts, 90 in gpuz. still difficult to understand that AMD use a lot of power from pcie after many years.. yes i understand that it doesn matter 3060 still will be beating.if take ratio will be the same like this 5700 126w at the wall will be 1.96-0.3=1.69$ for 5700 and for 3060 TI 168w 2.29-0.37=1.92$. Result is same because 90 vs 120 doesnt make much difference at the wall. beleive me.. it's important! I'm mining since 2013 you don't have to focus on today's earnings. Now even a 390 is profitable i believe you, if you been since 2013 you must see clearly that 3060ti gives best result among all cards been realesed until now, only price is too high for that card right now.for 399$ it will be best deal ever.
|
|
|
|
Jonpete
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 03, 2020, 10:38:56 PM |
|
I would really love to see a screen shot of ANYONE that can pump out more than 30 MH/card on (12+ per rig) RX 580 cards and hash stable for more than 24 hrs. No matter what I try it just will not happen. As soon as I push to 30 or higher, the rig will start to crash. I used to tune individual cards and get higher hash rate but that function has been broken since forever ago. So I would really love to see if anyone out there is actually able to achieve this.
Hive Os 12 cards RX580 nitro+ flashed bios 8gb 5.3b But 5.1c uses less watts
** 140:31 *** 12/3 22:11 ************************************** Eth: Mining ETH on eu1.ethermine.org:4444 for 4:26 Eth speed: 402.100 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.011 MH/s (4247) 2: 34.048 MH/s (4172) 3: 34.042 MH/s (4229) 4: 34.070 MH/s (4239/1) 5: 34.037 MH/s (4236) 6: 33.023 MH/s (4070/1) 7: 34.043 MH/s (41 868 MH/s (3780) 12: 33.922 MH/s (4222) Eth: Accepted shares 49633 (187 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 3 (0.01%), est. stales percentage 0.38% Eth: Maximum difficulty of found share: 1878.5 TH (!!!) Eth: Average speed (5 min): 401.930 MH/s Eth: Effective speed: 392.46 MH/s; at pool: 392.46 MH/s
Eth: New job #dcd08b28 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 402.008 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.035 MH/s (4247) 2: 34.034 MH/s (4172) 3: 33.998 MH/s (4229) 4: 34.055 MH/s (4239/1) 5: 34.066 MH/s (4236) 6: 33.000 MH/s (4070/1) 7: 34.047 MH/s (41 848 MH/s (3780) 12: 33.870 MH/s (4222) Eth: New job #54949746 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 401.999 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.019 MH/s (4247) 2: 34.030 MH/s (4172) 3: 34.003 MH/s (4229) 4: 34.032 MH/s (4239/1) 5: 34.062 MH/s (4236) 6: 32.998 MH/s (4070/1) 7: 34.058 MH/s (41 879 MH/s (3780) 12: 33.876 MH/s (4222) GPU1: 41C 64% 97W, GPU2: 42C 60% 97W, GPU3: 41C 60% 94W, GPU4: 37C 49% 97W, GPU5: 46C 69% 94W, GPU6: 46C 69% 94W, GPU7: 45C 69% 95W, GPU8: 43C 60% 98W, GPU9: 43 GPUs power: 1148.0 W Eth: New job #1a726889 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 402.127 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.026 MH/s (4247) 2: 34.043 MH/s (4172) 3: 34.025 MH/s (4229) 4: 34.030 MH/s (4239/1) 5: 34.052 MH/s (4236) 6: 33.015 MH/s (4070/1) 7: 34.058 MH/s (41 904 MH/s (3780) 12: 33.931 MH/s (4222) Eth: New job #6dc06b33 from eu1.ethermine.org:4444; diff: 4000MH Eth: New job #2613e1d5 from eu1.ethermine.org:4444; diff: 4000MH Eth: New job #a238716f from eu1.ethermine.org:4444; diff: 4000MH
GPU 2 03:00.0 Radeon RX 580 8192 MB · Sapphire Micron MT51J256M32 · 113-1E366CU-S5S fan core dpm core mem mdpm ref 34.01 MH 41° 60% 94W 1250 7 912 2250 1 240
For SK Hynix mem use 1230 core and 2200 for mem gets 32.9 Mh For Sumsung mem use 1150 core and 2000 for mem gets 30.88 Mh
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 10:43:15 PM |
|
@ Mr.Phoenix please check this out. it happens when Devfee tries to connect after 20 hours mining.
Devfee : Could not connect to ethash pool us1-etc.ethermine.org:4444: An operation on a socket could not be performed because system lacked sufficient buffer space or because queue was full.
I had so. After installing the AMD drivers, the HIDDEN mspng file (maybe another) clung to the startup treated as follows: 1 - deleted from startup 2- deleted from the task scheduler 2a reboot 3- search and delete computer files thank you for help. i couldnt find that thing on startup. there nvpn.exe which is belongs to intel graphics. What is the name? he himself could not understand for a long time. drivers used only official ... remove nvpn.exe from startup, from the scheduler. Reboot and search and delete from all files .... I apologize for my English ok Igor i understood.i saw it.Thanks man! Spasibo drujijshe. i deleted will reboot and wait and see.
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
December 03, 2020, 10:50:40 PM |
|
I would really love to see a screen shot of ANYONE that can pump out more than 30 MH/card on (12+ per rig) RX 580 cards and hash stable for more than 24 hrs. No matter what I try it just will not happen. As soon as I push to 30 or higher, the rig will start to crash. I used to tune individual cards and get higher hash rate but that function has been broken since forever ago. So I would really love to see if anyone out there is actually able to achieve this.
Hive Os 12 cards RX580 nitro+ flashed bios 8gb 5.3b But 5.1c uses less watts
** 140:31 *** 12/3 22:11 ************************************** Eth: Mining ETH on eu1.ethermine.org:4444 for 4:26 Eth speed: 402.100 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.011 MH/s (4247) 2: 34.048 MH/s (4172) 3: 34.042 MH/s (4229) 4: 34.070 MH/s (4239/1) 5: 34.037 MH/s (4236) 6: 33.023 MH/s (4070/1) 7: 34.043 MH/s (41 868 MH/s (3780) 12: 33.922 MH/s (4222) Eth: Accepted shares 49633 (187 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 3 (0.01%), est. stales percentage 0.38% Eth: Maximum difficulty of found share: 1878.5 TH (!!!) Eth: Average speed (5 min): 401.930 MH/s Eth: Effective speed: 392.46 MH/s; at pool: 392.46 MH/s
Eth: New job #dcd08b28 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 402.008 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.035 MH/s (4247) 2: 34.034 MH/s (4172) 3: 33.998 MH/s (4229) 4: 34.055 MH/s (4239/1) 5: 34.066 MH/s (4236) 6: 33.000 MH/s (4070/1) 7: 34.047 MH/s (41 848 MH/s (3780) 12: 33.870 MH/s (4222) Eth: New job #54949746 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 401.999 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.019 MH/s (4247) 2: 34.030 MH/s (4172) 3: 34.003 MH/s (4229) 4: 34.032 MH/s (4239/1) 5: 34.062 MH/s (4236) 6: 32.998 MH/s (4070/1) 7: 34.058 MH/s (41 879 MH/s (3780) 12: 33.876 MH/s (4222) GPU1: 41C 64% 97W, GPU2: 42C 60% 97W, GPU3: 41C 60% 94W, GPU4: 37C 49% 97W, GPU5: 46C 69% 94W, GPU6: 46C 69% 94W, GPU7: 45C 69% 95W, GPU8: 43C 60% 98W, GPU9: 43 GPUs power: 1148.0 W Eth: New job #1a726889 from eu1.ethermine.org:4444; diff: 4000MH Eth speed: 402.127 MH/s, shares: 49633/0/3, time: 140:31 GPUs: 1: 34.026 MH/s (4247) 2: 34.043 MH/s (4172) 3: 34.025 MH/s (4229) 4: 34.030 MH/s (4239/1) 5: 34.052 MH/s (4236) 6: 33.015 MH/s (4070/1) 7: 34.058 MH/s (41 904 MH/s (3780) 12: 33.931 MH/s (4222) Eth: New job #6dc06b33 from eu1.ethermine.org:4444; diff: 4000MH Eth: New job #2613e1d5 from eu1.ethermine.org:4444; diff: 4000MH Eth: New job #a238716f from eu1.ethermine.org:4444; diff: 4000MH
GPU 2 03:00.0 Radeon RX 580 8192 MB · Sapphire Micron MT51J256M32 · 113-1E366CU-S5S fan core dpm core mem mdpm ref 34.01 MH 41° 60% 94W 1250 7 912 2250 1 240
For SK Hynix mem use 1230 core and 2200 for mem gets 32.9 Mh For Sumsung mem use 1150 core and 2000 for mem gets 30.88 Mh
Holly molly you got aggressive rig over there 34mhs 49633 shares only 3 incorrect for 140hours crazy. looks like i must mod my bioses too for nitros.
|
|
|
|
zergbitcore
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 03, 2020, 11:50:35 PM |
|
PhoenixMiner, I want to ask you to improve miner window and log. I have 9 cards installed and sometimes it is not convenient to catch the situation when hashrate of one of them becomes 0 MH/s. Please, use red color for marking abnormal hashrates - it will make more simple to see the problem. The other problem is log. After miner fails my PC reboots (watchdog). To find the problem card I need to open log and find the text with problems (zero hashrate or "not responding" messages). But sometimes log file does not contain useful info, because it stops earlier than problem occur. I mean the problem appears in the miner window, but it does not appear in log file because of log file update delay (PC reboots earlier). This will be useful during batch undervolting/overclocking to find which card to change settings.
|
|
|
|
|