PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[AzzAz]

Hi!
 I want to buy ASIC under Ethereum.
 I only mined on the GPU.
 Question does ASIC already have the program sewn in?
Or will Phoenix need to be specially configured for ASIC?
 Thanks!

ASICs usually have linux based OS and you just need to do basic setup

[FEKIH]

2020.12.08:14:22:52.646: main Eth speed: 77.023 MH/s, shares: 0/0/0, time: 0:04
2020.12.08:14:22:52.646: main GPUs: 1: 19.879 MH/s (0) 2: 19.878 MH/s (0) 3: 19.875 MH/s (0) 4: 17.390 MH/s (0)
2020.12.08:14:22:53.733: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}


Why my hashrate is low, my gpu rx470

[abg00]

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #380 (3.97) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU6: Allocating DAG (3.98) GB; good for epoch up to #382




still get error like this for all my card RX480 8Gb
win10
AMD driver 20.4.2
virtual memory on drive C (page file): = 55900


any suggestion ? help, please

kernel 1 ?

[zenetibi]

Hi, how can I automate it to mine to a different ETH address at certain intervals without restarting the program?

[Pe_Da]

Hi All,

Anyone currently using RX 6800 with Phoenix miner what Hash rate are you getting and what are your settings granted there is no available bios mode yet.

Thanks in advance.

Optimized 63-65 Mhs @ 150W with my RX6800 but not realy stable. I´ve got some invalid shares ....
Not optimized and adjusted yet!

@developer, how is the current status?

[DejavuUS]

Hi All,

Anyone currently using RX 6800 with Phoenix miner what Hash rate are you getting and what are your settings granted there is no available bios mode yet.

Thanks in advance.

Optimized 63-65 Mhs @ 150W with my RX6800 but not really stable. I´ve got some invalid shares ....
Not optimized and adjusted yet!

@developer, how is the current status?

Thanks Good to know, do you care to share your settings, perhaps I might be lucky with the silicon on mine? Thanks in advance.

[Biterion]

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #380 (3.97) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU6: Allocating DAG (3.98) GB; good for epoch up to #382




still get error like this for all my card RX480 8Gb
win10
AMD driver 20.4.2
virtual memory on drive C (page file): = 55900


any suggestion ? help, please

kernel 1 ?

without ckernel setup

just used config like this:

-pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353
-wal <my wallet>
-pass x
-log 0
-proto 4
-stales 0
-fanmin 98
-fanmax 100

[LukaL]

Hello guys... I need some help here.

I switched my gpus (gtx 1070 8gb) to ETH after a long time, and what I see is some strange behavior. It seems that hashrate is low, and memory overclock doesn't have any effect.
What I was able to google out is that apparently when there is more than 50% of 1070's gpu memory utilized it starts to behave strangely. When I try mining ETC everything is normal (sure ETC have DAG size much lower, after fork).
So mining ETC I am able to get 33 MHs at 90W with underclock and undervolt core and overclocked memory as much as possible, while
mining ETH I get 28 MHs at 115W (overclocked nd undervolted core, little overclock on memory) ... you see my despair ... also mining ETH overclockin core have positive effect on hashrate, while overclocking memory doesn't have any impact - which is not normal for ethash.

It happens the same on windows or linux (hive os), the same on all miners (lol miner, phoenix miner, t-rex miner ...)

I was not able to find any solution to this.
So is there any workaround this issue?
Thanks for your help Wink Cheers

[zeezoo]

Hello guys... I need some help here.

I switched my gpus (gtx 1070 8gb) to ETH after a long time, and what I see is some strange behavior. It seems that hashrate is low, and memory overclock doesn't have any effect.
What I was able to google out is that apparently when there is more than 50% of 1070's gpu memory utilized it starts to behave strangely. When I try mining ETC everything is normal (sure ETC have DAG size much lower, after fork).
So mining ETC I am able to get 33 MHs at 90W with underclock and undervolt core and overclocked memory as much as possible, while
mining ETH I get 28 MHs at 115W (overclocked nd undervolted core, little overclock on memory) ... you see my despair ... also mining ETH overclockin core have positive effect on hashrate, while overclocking memory doesn't have any impact - which is not normal for ethash.

It happens the same on windows or linux (hive os), the same on all miners (lol miner, phoenix miner, t-rex miner ...)

I was not able to find any solution to this.
So is there any workaround this issue?
Thanks for your help Wink Cheers

It is, unfortunately, normal behaviour for Nvidia 10x0 series. Growing DAG is significantly reducing hashrate. Nothing to be done here, except increasing core frequency/voltage until it's unstable or too hot... Good hashrates are basically gone on these cards. Even 1080 Ti was doing 57 MH/s with eth pill and now it's down to 45-47. What I did was reducing memory OC but increased core clocks a little (1920) to find sweet spot between hashrate/temps/power comsumption.
Coming back to lower DAG size will bring hashrates back to normal, hence if you want to see numbers higher the only solution is to mine ETC or other ethash coins with small DAG.

[Pe_Da]

Hi All,

Anyone currently using RX 6800 with Phoenix miner what Hash rate are you getting and what are your settings granted there is no available bios mode yet.

Thanks in advance.

Optimized 63-65 Mhs @ 150W with my RX6800 but not really stable. I´ve got some invalid shares ....
Not optimized and adjusted yet!

@developer, how is the current status?

Thanks Good to know, do you care to share your settings, perhaps I might be lucky with the silicon on mine? Thanks in advance.

I meant PhoenixMiner is not adjusted to mine with the RX6000 Series, I´ve got invalid shares with standard clocks as well.
But only with Phoenix, Lolminer and Nanominer for example works fine but with slightly lower hashrate (62-63 M/hs) ...

[ivannz]

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

p.s.  Lolminer and Nanominer works fine as previous post.

[miner29]

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020?

[ivannz]

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020?

I think you do not understand the conception behind Windows 10; why is made, when you need that "update", what you need and why you need.

Please do not post noob replies about that post. Only technical resolves or analyses - if you have such.
Thank you.

[miner29]

After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them.
Definitely Phoenix Miner has some problem either with the drivers or itself.
Video cards: Gigabyte - RX 580 8G
BIOS: Default Polaris Bios Editor set
Driver info: robinh00d_package_dag_fix
OpenCL driver version: 17.31.0
Driver data: 27.7.2017
Driver Version: 22.19.659.1
Operating system: Windows 7 Version 6.1.7601

I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.

You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020?

I think you do not understand the conception behind Windows 10; why is made, when you need that "update", what you need and why you need.

Please do not post noob replies about that post. Only technical resolves or analyses - if you have such.
Thank you.

Thanks for pointing out my noob answer.     Im well aware of what win10 is. 

I did not advise anything except point out that the os you are using is deprecated by MS about a year ago which does have an effect on the situation.

My linux rigs, all 30 are running just fine without a single issue.

Best of luck getting it solved.

[Deafran]

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #380 (3.97) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU6: Allocating DAG (3.98) GB; good for epoch up to #382




still get error like this for all my card RX480 8Gb
win10
AMD driver 20.4.2
virtual memory on drive C (page file): = 55900


any suggestion ? help, please

may be can help
https://bitcointalk.org/index.php?topic=5292588.msg55663703#msg55663703

[Biterion]

GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #380 (3.97) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.
GPU6: Allocating DAG (3.98) GB; good for epoch up to #382




still get error like this for all my card RX480 8Gb
win10
AMD driver 20.4.2
virtual memory on drive C (page file): = 55900


any suggestion ? help, please

may be can help
https://bitcointalk.org/index.php?topic=5292588.msg55663703#msg55663703

still getting same error..
try with PM 5.0e until 5.3b still can't run to mine

get same notice:
Allocating buffers failed with: clCreateBuffer (-61).
Fatal error detected. Restarting.

repeat and repeat again..

help, please

[Johndrc]

Phoenix 5.3b so many stuck thread issue compare to last version much better in Eth

[Biterion]

Phoenix 5.3b so many stuck thread issue compare to last version much better in Eth

i think i'am stupid miner
meanwhile, I'm running another miner
There were no problems until DAG # 380
all 8Gb VRAM cards cannot run using PM
no updates and explanations
very sad

[soda37]

Hi @PhoenixMiner

I've recently switched from Claymore miner and very happy with 5.3b version except that intermittently miner reports 0 as average speed. If I press "s" right away, it shows correct values. As a result, I can't use "minspeed" option, rig starts to reboot despite that in fact 5 min average is ok.

Drivers are 20.11.2 WHQL.

[bishkot]

Hi guys,
as claymore stopped working i switched to phoenix mine 5.3b

At first everything was working.

I noticed the Google Meet icon appeared down at the right corner (maybe windows updated itself )

Im using Win 10 and sapphire rx580 8gb nitro+

Phoenix stopped working and also no other miner works atm. Lol, claymore etc..
All i see is NO CUDA Driver and then
https://ibb.co/M8yFcB1

Tried to reinstall AMD drivers - currently I'm using Adrenalin 2020 Edition 20.4.1
Tried to disable Defender and i noticed i cannot add exclusuin folders anymore and also my exclusion folders that i added before are  gone from the exclusion list.

Should i try reinstalling windows if yes what win 10 version and amd rx580 driver combination to try?
I have 10X GPUS

Please advise.