[ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins

[pinpins]

Hello,

Realized noon payment didn't take a place, setting went off for bitcoin after restart of system. All will be covered by next payment.

[1714023178]

1714023178

[dragonmike]

Hi Pinpins, apologies if that's already been asked (couldn't find it doing a quick search) but... Why no XZC (Zcoin) on the lyra2z port?

Could you add it please?

Hi,

It is too difficulty in general. I don't think we will find any block

Fair point. You're probably right.
Then focus on getting the other two coins on autotrade 😊

[miki777]

why no payouts friend?? Wallet: RRtqrTKGHuh3wQbMcjCzEm7ZxtUhhhMbFe

[Flash54]

All new finding coin on Neoscrypt have status NEW after 50 minutes!!

[pinpins]

UPDATE.

1. Improvement. I am on a way to deploy improvement, so directly mined coins don't go through long exchange process and are accounted almost directly

[sundownz]

I've switched over ~15% of my workers -- just got my first payment. So the pool is paying out... I believe some folks in here just haven't reached the threshold. I'm in the process of moving the rest of my GPUs and CPUs over the next week or so and also a friends farm (he has 58x 1080Ti).

[pinpins]

UPDATE.

1. Improvement. I am on a way to deploy improvement, so directly mined coins don't go through long exchange process and are accounted almost directly

Above improvement has been implemented.
"Exchange" time for non-exchange coins will be 3 hours. Some time is still kept to secure timely reaction in case of chain splits.

[dragonmike]

UPDATE.

1. Improvement. I am on a way to deploy improvement, so directly mined coins don't go through long exchange process and are accounted almost directly

Above improvement has been implemented.
"Exchange" time for non-exchange coins will be 3 hours. Some time is still kept to secure timely reaction in case of chain splits.

What do you mean exchange time for non-exchange coins?
Are you going to enable coins that are currently on "no auto-trade" and trade them every 3 hours manually or something?

[tuttimuratti]

this pool thief!!!!!

I use 24 hours; he did not even make half the money he needed to give.
i tried with 1070ti.

https://resmim.net/f/e3YDhc.jpg i used ltc change

https://resmim.net/f/7orq08.jpg

sorry for bad English..

[eminer001]

this pool thief!!!!!

I use 24 hours; he did not even make half the money he needed to give.
i tried with 1070ti.

https://resmim.net/f/e3YDhc.jpg i used ltc change

https://resmim.net/f/7orq08.jpg

sorry for bad English..

You used one of the most volatile coins for test, but you might be right, because on zergpool you will always get less actual BTC real payments that inflated values from estimates that you expect to get. Below is the solution for your problem.

The only solution is to have every day test miners (with a single gpu each - you get the same results if you use 12 gpus for each) on all pools with different wallets for each pool. The wallet for the pool with the best BTC payment performance will be used for the rest of your rigs. After a few weeks you can rotate wallets and you won't loose even the small values you have on these wallets.

Any other statistic that is either current, 24h estimate or 24h actual has no relevance when you compare with this method.  Pool administrators must respond in minutes to forks or issues and the pools that are failing to do this have bad BTC payments when you compare with statistics that made that pool be in the top of estimates when mining.

Pool fee has zero relevance also, because besides visible fee, there is another parameter that is called EXCHANGE_FEE and some pools have high values for it (it is 6% and 10% for others, and some might have it at 0%, you can not know, you must see real payments).

I hope everyone use this method because it's the best. To use it, you just have to select just one GPU, because if you use 1 gpu or 12 gpus for this test, the difference between pools is exactly the same.

With this method you do not waste your money and with 6 gpus you can test 3 pools with both current and 24h estimates.

This method is also bulletproof to  any trick pools might use like: inflating estimates, editing the code (you only have to edit one line of code and pools can steal 10% from all your income) , changing database values, and many others.

I also suggest to Patrike to implement a variation of this solution besides others he has in mind,  because pools are not fair, and real payments are the only fair part you can check and evaluate pools.

Let me know if you find better solutions

[pinpins]

UPDATE.

1. Improvement. I am on a way to deploy improvement, so directly mined coins don't go through long exchange process and are accounted almost directly

Above improvement has been implemented.
"Exchange" time for non-exchange coins will be 3 hours. Some time is still kept to secure timely reaction in case of chain splits.

What do you mean exchange time for non-exchange coins?
Are you going to enable coins that are currently on "no auto-trade" and trade them every 3 hours manually or something?

Let me elaborate more.
First it takes coin to mature(get confirmed in block chain) - time is different for every coin as per design.  Then there is exchange time for coins entitled to be changed, it incorporates couple of activities: time to send coin to exchange and mature there again, collect coin amount for minimum order, sell, and finally withdraw back.

When it comes to non-autotrade coins, those could be payed right away after they mature. Or every 12 hours as per pool payment schedule. However I reserve additional 3 hours for those coins to be on safe side. (E.g. we have time to react on any hiccup). Given 12hours payments schedule those 3 hours does not make much difference, but keep us more safe in operations.

Hope this explains!

[jagauthier]

why no payouts friend?? Wallet: RRtqrTKGHuh3wQbMcjCzEm7ZxtUhhhMbFe

payment threshold is ~116.74 based on 0.005 BTC equivalent; and ~23.35 on Sunday      1.58424756 RAP

You have to meet the payment threshold to get paid. Simple.

[MrPlus]

Any issue with x16r right now?
No block in more than 5 hours...

[monkeyguy]

I am using string c=LTC in my password to try and get LTC payout, when I look at stats on zergpool site I see this:

https://imgur.com/udYkxlh

Does zergpool just accumulate BTC and then pay an LTC equivalent upon reaching the minimum payout or is my stats page supposed to be showing LTC amounts? Any way to change it?

EDIT: Got in contact with MrBean on discord and he is being very helpful. I think I may have first connected to zerg with a master version of nemos miner which had password as "-p workername, c=LTC" before I manually removed the space, which is probably the reason for my problem. MrBean said he was able to submit my problem to the pool owner who can fix it. Thanks for the awesome support.

EDIT 2: Problem has been fixed, thanks!

[pinpins]

UPDATE

1. HW upgrade with associated downtime is planned for 14:00 CET-14:30 CET 24.03.2018(today). And you are safe to mine until then

[eminer001]

UPDATE

1. HW upgrade with associated downtime is planned for 14:00 CET-14:30 CET 24.03.2018(today). And you are safe to mine until then

Do you have an estimated downtime duration ? How many hours do you think it will take ? Also be careful about DNS updates if you change the IP, to update DNS records to 30min TTL a few hours before updating the ip.

Thanks.

[alnash]

UPDATE

1. HW upgrade with associated downtime is planned for 14:00 CET-14:30 CET 24.03.2018(today). And you are safe to mine until then

Good luck.
When the upgrade will be over, please put a note here.

[Stellvia]

this pool thief!!!!!

I use 24 hours; he did not even make half the money he needed to give.
i tried with 1070ti.

https://resmim.net/f/e3YDhc.jpg i used ltc change

https://resmim.net/f/7orq08.jpg

sorry for bad English..

I have same problem here, i use awsome miner too and I think only half ot the money is real compared to the estimate. Zergpool is lying OR estimate is really bad.
I can understand estimate is not real but the difference is too high.

Sorry for my english.

[sundownz]

UPDATE

1. HW upgrade with associated downtime is planned for 14:00 CET-14:30 CET 24.03.2018(today). And you are safe to mine until then

Good luck.
When the upgrade will be over, please put a note here.

My home office PC started mining again a few minutes ago after ~1-hour downtime.

[SergADM]

Tpaнcкpибиpoвaниe зaпyщeнo, выxoднoй фaйл .\Logs\2018-03-24_16-10-11.txt
PS>TerminatingError(ConvertFrom-Json): "Heдoпycтимый пpимитив JSON: ."
ConvertFrom-Json : Heдoпycтимый пpимитив JSON: .
C:\Users\TEST-PP\Desktop\Sniffdogminer-4.9\Include.ps1:127 знaк:42
+            $Content = $_ | Get-Content | ConvertFrom-Json
+                                          ~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [ConvertFrom-Json], ArgumentException
    + FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand
ConvertFrom-Json : Heдoпycтимый пpимитив JSON: .
C:\Users\TEST-PP\Desktop\Sniffdogminer-4.9\Include.ps1:127 знaк:42
+            $Content = $_ | Get-Content | ConvertFrom-Json
+                                          ~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [ConvertFrom-Json], ArgumentException
    + FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand

PS>TerminatingError(ConvertFrom-Json): "Heдoпycтимый пpимитив JSON: ."
ConvertFrom-Json : Heдoпycтимый пpимитив JSON: .
C:\Users\TEST-PP\Desktop\Sniffdogminer-4.9\Include.ps1:127 знaк:42
+            $Content = $_ | Get-Content | ConvertFrom-Json
+                                          ~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [ConvertFrom-Json], ArgumentException
    + FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand
ConvertFrom-Json : Heдoпycтимый пpимитив JSON: .
C:\Users\TEST-PP\Desktop\Sniffdogminer-4.9\Include.ps1:127 знaк:42
+            $Content = $_ | Get-Content | ConvertFrom-Json