[ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins

[pinpins]

Been mining LINX solo for 2 days now.  It is recognizing my blocks and rewards have been put on pool ledger but have not payed out yet?   My balance is well over the threshold.

Please send me your address to check issue

[valsens]

for worker name "rig" and autoexchange its corect the line:
-p rig,c=x16r,mc=xzc ??

[Siolim]

Hi Zerg! Great job. Make NH support for equihash.
Planning autoexchange Safecoin?

Best wishes.

[pinpins]

for worker name "rig" and autoexchange its corect the line:
-p rig,c=x16r,mc=xzc ??

yes, only coin symbol better in capital mc=XZC

[pinpins]

Hi Zerg! Great job. Make NH support for equihash.
Planning autoexchange Safecoin?

Best wishes.

yes, waiting for crex24 to make it live

[Siolim]

Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.

Will there be changes?

[pinpins]

Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.

Will there be changes?

Hi,

Can you give some more details, so we can improve? Like what algo or coin you tried

pinpin

[Siolim]

Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.

Will there be changes?

Hi,

Can you give some more details, so we can improve? Like what algo or coin you tried

pinpin

Algo - X11, Sha256, scrypt,x16,lyra2v2.

I am primarily interested in data from here - http://api.zergpool.com:8080/api/status, but they are updated with a delay. First you have an update in the left table, where the coins http://www.zergpool.com/site/mining, I look at the Profit column, it takes a little time. Further, after some time, the data in the right table changes - the current estimate. And only in 15-30-45 seconds (sometimes longer) the data on the general API is updated (http://api.zergpool.com:8080/api/status). For me (NH) a very big update delay. Update the data everywhere at once or first here http://api.zergpool.com:8080/api/status.

Thank you, royal wishes.

[haliavshik]

http://zergpool.com/?address=18HZHRS8yD1XF6HTjYixskWQk6NZf6bg2u
on last blocks found by my miners it shows Snowgem block found two hours ago but it does not show up in earnings and also is not shown as solo. i have c=btc,m=solo in password
blockhash 000000fae2ff6f9894c48e064a9c157fe663ab8c1a848e11a5e19e84f74349d6

[somaton]

i see same thing here every day, miner shows that i found "block" and i can see it in my found blocks at left side of screen, but it does not have blue "solo" pic and i'll receive just a few % of that block just like if i'm mining normal way. So, you are not alone.

[pinpins]

Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.

Will there be changes?

Hi,

Can you give some more details, so we can improve? Like what algo or coin you tried

pinpin

Algo - X11, Sha256, scrypt,x16,lyra2v2.

I am primarily interested in data from here - http://api.zergpool.com:8080/api/status, but they are updated with a delay. First you have an update in the left table, where the coins http://www.zergpool.com/site/mining, I look at the Profit column, it takes a little time. Further, after some time, the data in the right table changes - the current estimate. And only in 15-30-45 seconds (sometimes longer) the data on the general API is updated (http://api.zergpool.com:8080/api/status). For me (NH) a very big update delay. Update the data everywhere at once or first here http://api.zergpool.com:8080/api/status.

Thank you, royal wishes.

Hi,

Have reduced time between API refresh by 10 sec

[pinpins]

http://zergpool.com/?address=18HZHRS8yD1XF6HTjYixskWQk6NZf6bg2u
on last blocks found by my miners it shows Snowgem block found two hours ago but it does not show up in earnings and also is not shown as solo. i have c=btc,m=solo in password
blockhash 000000fae2ff6f9894c48e064a9c157fe663ab8c1a848e11a5e19e84f74349d6

Weird, pity I haven't caught it, as you certain m=solo was there during mining? Now shares already gone, but if you will start XSG mining again, ping me in discord I will monitor your case more closely

[haliavshik]

i have also noticed that in miner per coin it shows something like 1.4 Mh/s shared mode and 50.6 Mh/s solo mode on various algorythms while you can see that 3 miners that i run all use c=btc,m=solo it shows that i have shares in shared mode while i have shared configured only for progpow.
https://imgur.com/Rs7Vjvz

[Siolim]

http://[img][img][/img][/img]

Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.

Will there be changes?

Hi,

Can you give some more details, so we can improve? Like what algo or coin you tried

pinpin

Algo - X11, Sha256, scrypt,x16,lyra2v2.

I am primarily interested in data from here - http://api.zergpool.com:8080/api/status, but they are updated with a delay. First you have an update in the left table, where the coins http://www.zergpool.com/site/mining, I look at the Profit column, it takes a little time. Further, after some time, the data in the right table changes - the current estimate. And only in 15-30-45 seconds (sometimes longer) the data on the general API is updated (http://api.zergpool.com:8080/api/status). For me (NH) a very big update delay. Update the data everywhere at once or first here http://api.zergpool.com:8080/api/status.

Thank you, royal wishes.

Hi,

Have reduced time between API refresh by 10 sec

Hi,

I'm fine with time. The data on your site is slowly updated here - http://api.zergpool.com:8080/api/status
The delay from real data is more than 30 seconds, sometimes more than 1-3 minutes.

Give email. I'll send you a screen with notes. Here the picture is not attached.

[pinpins]

i have also noticed that in miner per coin it shows something like 1.4 Mh/s shared mode and 50.6 Mh/s solo mode on various algorythms while you can see that 3 miners that i run all use c=btc,m=solo it shows that i have shares in shared mode while i have shared configured only for progpow.

Checked your case seems on new work start(new POLY block), one share is being recorded as non solo referring to some worker id, already gone/disconnected.
Good it just one share, and I will keep monitoring to catch moment worker reconnects putting non solo share.

[haliavshik]

19 minutes ago same thing happened to brazio block it does not shows as solo and it is missing from earnings
http://zergpool.com/?address=18HZHRS8yD1XF6HTjYixskWQk6NZf6bg2u
blockhash 00000000019578f2fdff6fb94e07e5833d2ea028819d08a363a80bdc68766d60

[haliavshik]

also just happened on globaltoken hmq1725 and plusonecoin hmq1725 38 minutes ago

[pinpins]

UPDATE

To attract more miners we set 0% fee now for scrypt, x16r, x16rt and mtp algorithms at zergpool

[pinpins]

[/img][/img]

Hey. I tried to connect NH by API. Everything is very bad, your API works with delays, sometimes freezes for a long time, lost 0.07 btc.

Will there be changes?

Hi,

Can you give some more details, so we can improve? Like what algo or coin you tried

pinpin

Algo - X11, Sha256, scrypt,x16,lyra2v2.

I am primarily interested in data from here - http://api.zergpool.com:8080/api/status, but they are updated with a delay. First you have an update in the left table, where the coins http://www.zergpool.com/site/mining, I look at the Profit column, it takes a little time. Further, after some time, the data in the right table changes - the current estimate. And only in 15-30-45 seconds (sometimes longer) the data on the general API is updated (http://api.zergpool.com:8080/api/status). For me (NH) a very big update delay. Update the data everywhere at once or first here http://api.zergpool.com:8080/api/status.

Thank you, royal wishes.

Hi,

Have reduced time between API refresh by 10 sec

Hi,

I'm fine with time. The data on your site is slowly updated here - http://api.zergpool.com:8080/api/status
The delay from real data is more than 30 seconds, sometimes more than 1-3 minutes.

Give email. I'll send you a screen with notes. Here the picture is not attached.

Hi Zerguli. Why not answer?
This is of course tin, 6 bad blocks and a lot of non-payment.

Orphans may to happen, especially for some quick coins like VERGE. As for a payment, min threshold for payment 0.0025, so you should mine little more to reach it.

[pinpins]

UPDATE

1. Exosis(EXO) coin was added, on new algorithm exosis.