[ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins

[Arsenay]

Magi -  this is mysticism    

[1713939394]

1713939394

[Wolf_Tech]

Ran solo all day 8 hours of nothing at all nothing period no blocks no earnings nothing switched to shared within 11 min got block of verge.

Rage Quit.

[pinpins]

UPDATE

1. Pool fee on odocrypt algo has been reduced to 0% to attract more miners

[somaton]

Extremely high rate of "Invalid job id" for Veil because of increased lowest / default difficulty to 25 from 14. It was almost perfect just two days ago and for long time (months). It is not the first time you are doing this with your pool coins and you want to attract more miners with just removing 0,5% fee? With so high rate of invalid shares, you can easily have more profit from other pools even with higher fees. Looks like one more coin to mine with different pool...

[sundownz06]

Basically my entire operation is down -- x16r and x16s -- all display the same error... just says "no connection"

Worker "001" is at home... it connects on x16r.

I have a few systems on x17 at my main work location and they are all up.

http://zergpool.com/?address=1CdWHxQf41Bydd4JDxmBQ3Z1P9T6TRZdCR

Did my IP get banned or something ? Miner update needed perhaps ?

[sundownz06]

Basically my entire operation is down -- x16r and x16s -- all display the same error... just says "no connection"

Worker "001" is at home... it connects on x16r.

I have a few systems on x17 at my main work location and they are all up.

http://zergpool.com/?address=1CdWHxQf41Bydd4JDxmBQ3Z1P9T6TRZdCR

Did my IP get banned or something ? Miner update needed perhaps ?

I am checking other algorithms and the same thing... "no connection" on nearly all of my work location stuff.

I can ping Zergpool & the algorithm servers no problem.

I can connect to ZPOOL no problem so my connection is fine.

[Wolf_Tech]

Ok I got a bone to pick with pinpins

My address is 123tsfqm8UmK3UYs3ysLWtEfmXt1fhTcF4, I have been mining for a week in solo or party and hardly find any blocks at all. Now I went to a friend today that has some antminer l3's his address is 17UtYuUAh83Do5i2CGmG8MFBXqACqcz2Gr we setup a party together and have been running for almost 16 hours now and his miners are finding blocks but mine dead in the water.

Please see if my address is on a blacklist or something.

I mean seriously I used to make 0.0025 a week.

Am I'm just having the worst luck ever or is there something up.

[scryptr]

<SNIP>
I mean seriously I used to make 0.0025 a week.

Am I'm just having the worst luck ever or is there something up.

THERE MAY BE SOMETHING UP--

Recently, there was a network problem of some sort.  I think it affected some of the profitablity calculations for the worse.  The miner population shifted in response, and some of the top mining algos were actually providing little profit even if the coins at the market had a steady value. The number of miners and hash rate had dropped.

Your continual reports of solo-mining problems may have their own merit as well.  Personally, I'd like to know when any coins within an algorithm are being merge-mined versus individually mined with only portions of the total hash rate.  There are low value coins that I would not like to waste hash power on unless they are being merge-mined.  I use the "mc=COIN" flag in my password string to focus my hash, but would like to know if that focus is actually necessary.  If coins are being merge-mined, the "mc" flag is not necessary, as the low value coins  are mined with no separate effort.  On the other hand, if the pool software is portioning out the mining hash, I want my hash focused on the valuable coins.

And, as for solo-mining, there are some good algos where my hash is enough for mining blocks solo.  I just keep reading your reports and have not experimented, as I can't afford to waste hash.

Perhaps pinpins will respond...       --scryptr

[Wolf_Tech]

Seems to be working better this morning for some reason. Been 7 days but today finally seeing some blocks being found on the solo a bit. I will monitor it all day hopefully pinpins looked at it.

It was wierd though, My antminers was showing blocks found even once I saw a block that was 1.8 billion which was maybe a digibyte but the pool reported nothing.

[pinpins]

Basically my entire operation is down -- x16r and x16s -- all display the same error... just says "no connection"

Worker "001" is at home... it connects on x16r.

I have a few systems on x17 at my main work location and they are all up.

http://zergpool.com/?address=1CdWHxQf41Bydd4JDxmBQ3Z1P9T6TRZdCR

Did my IP get banned or something ? Miner update needed perhaps ?

Please PM me your IP to verify

thanks
pinpin

[pinpins]

Ok I got a bone to pick with pinpins

My address is 123tsfqm8UmK3UYs3ysLWtEfmXt1fhTcF4, I have been mining for a week in solo or party and hardly find any blocks at all. Now I went to a friend today that has some antminer l3's his address is 17UtYuUAh83Do5i2CGmG8MFBXqACqcz2Gr we setup a party together and have been running for almost 16 hours now and his miners are finding blocks but mine dead in the water.

Please see if my address is on a blacklist or something.

I mean seriously I used to make 0.0025 a week.

Am I'm just having the worst luck ever or is there something up.

Sorry for delay in response, I do respond quicker in discord.
I see you were hashing during 24h on scrypt, so I assume it got connected finally?

pinpin

[pinpins]

<SNIP>
I mean seriously I used to make 0.0025 a week.

Am I'm just having the worst luck ever or is there something up.

THERE MAY BE SOMETHING UP--

Recently, there was a network problem of some sort.  I think it affected some of the profitablity calculations for the worse.  The miner population shifted in response, and some of the top mining algos were actually providing little profit even if the coins at the market had a steady value. The number of miners and hash rate had dropped.

Your continual reports of solo-mining problems may have their own merit as well.  Personally, I'd like to know when any coins within an algorithm are being merge-mined versus individually mined with only portions of the total hash rate.  There are low value coins that I would not like to waste hash power on unless they are being merge-mined.  I use the "mc=COIN" flag in my password string to focus my hash, but would like to know if that focus is actually necessary.  If coins are being merge-mined, the "mc" flag is not necessary, as the low value coins  are mined with no separate effort.  On the other hand, if the pool software is portioning out the mining hash, I want my hash focused on the valuable coins.

And, as for solo-mining, there are some good algos where my hash is enough for mining blocks solo.  I just keep reading your reports and have not experimented, as I can't afford to waste hash.

Perhaps pinpins will respond...       --scryptr

Just clarify solo and non solo is just matter of reward distribution in case your miner was identified as finder. Hashing and block finding logic is the same in a pool.

When it comes to hashing and mc= option, I always recommend to put alternative coin in mc set, like mc=DGB/GAME. Giving example, as pool is autoswitch when DGB appears on top of list, all free hash(not locked with mc=) is moves to DGB and all of sudden DGB becomes full of hash, until next diff raise it receives more hash that it can consume, pool logic then moves extra hash to next coin in your list based on profitability, say GAME, and you have chance to find block there and utilizing left overs in better manner.

Hope this helps or clarifies a bit.

pinpin

[Wolf_Tech]

Actually some company has released new scrypt miners and is not selling them to the public. Nicehash and all the other pools in the last week has seen scrypt tripled in hashrates.

Sucks that us little guys cannot get them.

[Brondal]

Hello, first: you have a good pool. Now my question: how can i mine with a StrongU STU-U2 on the blake2b algorithm at your pool?

Thank you for a answer.

[scryptr]

Actually some company has released new scrypt miners and is not selling them to the public. Nicehash and all the other pools in the last week has seen scrypt tripled in hashrates.

Sucks that us little guys cannot get them.

THERE IS AN OLD, RESPECTED POOL THAT PAYS YOU TO MINE LITECOIN--

I can't remember its name just now, but it pays more than 100% for your hashrate. Seriously!

The secret?  It merge-mines so many scrypt-algo coins that the other scrypt coins result in a more-than-100% scrypt yield for the pool.  The miner can only get LiteCoin (LTC), all the merge-mined scrypt coins go for the profit margin.  The miner gets a fixed percentage, 1% or 2% or something.  That is to say the miner gets more than he would make mining LTC solo with no fee at all.  And, this is while pool mining and submitting shares.

That is why I asked pinpins about merge-mining.  No extra effort or energy is necessary to merge-mine multiple coins of the same algorithm.  VertCoin (VTC) was the first to introduce this, and some scrypt coins and X11 coins are merge-mineable by design.  It does take extra effort to code and set-up a pool for this.  I'd like to know if YIIMP pools are compatible.

I hope that pinpins might answer...       --scryptr

[joblo]

yaamp/yiimp has had merged mining for a long time. Take a look at scrypt, all those coins at the
bottom of the list with the hashrate in gray are merge mined.

[scryptr]

yaamp/yiimp has had merged mining for a long time. Take a look at scrypt, all those coins at the
bottom of the list with the hashrate in gray are merge mined.

THANKS FOR THE ANSWER--

The question has been on my mind for some time.  What I don't like about YIIMP is that it can portion my hash away from a high-value coin and mine a low-value coin with my hash instead of merge-mining both with the same hash.  When this happens, I lose out on building "hash-equity" (or contributing and accumulating shares) for the high-value coin.

--scryptr

[joblo]

I've been trying to follow but I'm lost. I can't figure whether you're compaining about
allocating hash to coins in the multipool or merged mining. They aren't related.

A clear problem definition would help.

[scryptr]

I've been trying to follow but I'm lost. I can't figure whether you're compaining about
allocating hash to coins in the multipool or merged mining. They aren't related.

A clear problem definition would help.

NO FLAG TO SET MERGED MODE MINING--

I mine lyra2v3, and it features 3 coins.  VertCoin (VTC) has a solid value, the other two are less valuable by at least an order of magnitude.

If I set "mc=VTC" in my password string, I mine VTC, and accumulate shares for VTC while waiting for a block.  If I do not set a mining coin (i.e. "mc"), the pool directs my hash to any of the three coins, but not necessarily to VTC.  I loose out on VTC shares when mining the less valuable coins.

If there was a merge-mining flag, "mg=VTC/HANA", or just "mg" to merge-mine all merge-mineable coins within an algo, I would accumulate shares on VTC at the same rate as if I were mining only VTC, and still receive shares for the merge-mined coins and earn BTC for payout.

Apparently, YIIMP portions out hash based on difficulty.  The less valuable coins often have frequent blocks, but it may take more than a day of mining less valuable coins to equal the value of a single VTC block, which currently has blocks found every few hours.

Not all coins and algorithms support merge-mining.  VTC was designed for merge-mining.  SHA256 and Scrypt allow merge-mining.  More earnings could be mined by the miners if merge-mining were a flag option at the pool.  I don't think the pool would loose any earnings, likely it would gain earnings with a greater coin turnover on the market.       --scryptr

[joblo]

You misunderstand, you can't choose the merged coins, the coin devs do. One coin is primary and you mine
that, Any coins merged with it also receive your hash.

Merged mining is only supported for coins designed for it.

The available parasite coins are always listed at the bottom and always have hash assigned to them.
The hash display is gray to indicate merged hash.

In most cases you can identify the host coin because the hash rates match, but scrypt is more complicated
because there are multiple hosts and multiple parasites. It would be nice to be able to identify which
parasites merge with which hosts.