integminer
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 24, 2018, 06:37:44 PM |
|
I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
|
|
|
|
LTZ-Team (OP)
Jr. Member
Offline
Activity: 387
Merit: 2
|
|
January 24, 2018, 06:47:23 PM |
|
I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI.
|
LitecoinZ - Designed For The Future Join our community on Discord: https://discord.gg/QNcS4Pm Official Website: https://litecoinz.org/
|
|
|
integminer
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 24, 2018, 06:59:56 PM |
|
Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI.
|
|
|
|
integminer
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 24, 2018, 07:59:05 PM |
|
OK I tried that and it still errors out. Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI. addnode=telnet dnsseed.kemperink.org 29333 rpcuser = user rpcpassword = password server = 1 listen = 1 addnode = 88.86.186.158 addnode = 88.86.186.158: 29333 addnode = 178.32.117.60: 29333 addnode = 85.214.53.137: 29333 addnode = 139.59.145.115: 29333 addnode = 173.249.11.207: 29333 daemon=1 gen=4
|
|
|
|
tkat79
Newbie
Offline
Activity: 3
Merit: 0
|
|
January 24, 2018, 09:36:35 PM |
|
Follow these instructions. https://miningclub.info/threads/ltz-litecoinz-equihash-pow.30445/page-5OK I tried that and it still errors out. Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI. addnode=telnet dnsseed.kemperink.org 29333 rpcuser = user rpcpassword = password server = 1 listen = 1 addnode = 88.86.186.158 addnode = 88.86.186.158: 29333 addnode = 178.32.117.60: 29333 addnode = 85.214.53.137: 29333 addnode = 139.59.145.115: 29333 addnode = 173.249.11.207: 29333 daemon=1 gen=4
|
|
|
|
integminer
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 24, 2018, 09:44:16 PM |
|
ok I did. I am still getting the error. When I run litecoinzd.exe is stops working when the sync hits 100%. Follow these instructions. https://miningclub.info/threads/ltz-litecoinz-equihash-pow.30445/page-5OK I tried that and it still errors out. Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI. addnode=telnet dnsseed.kemperink.org 29333 rpcuser = user rpcpassword = password server = 1 listen = 1 addnode = 88.86.186.158 addnode = 88.86.186.158: 29333 addnode = 178.32.117.60: 29333 addnode = 85.214.53.137: 29333 addnode = 139.59.145.115: 29333 addnode = 173.249.11.207: 29333 daemon=1 gen=4
|
|
|
|
tkat79
Newbie
Offline
Activity: 3
Merit: 0
|
|
January 24, 2018, 10:19:34 PM |
|
If you dont have any coins, delete everything and try again. I had problems at first too but after following the instructions i posted, all was well. If you have coins, make sure you backup your .dat file before you do anything. Maybe wait for the dev to chime in.
|
|
|
|
LTZ-Team (OP)
Jr. Member
Offline
Activity: 387
Merit: 2
|
|
January 24, 2018, 11:48:34 PM |
|
please open a detailed issue https://github.com/litecoinz-project/litecoinz/issuesThanks ok I did. I am still getting the error. When I run litecoinzd.exe is stops working when the sync hits 100%. Follow these instructions. https://miningclub.info/threads/ltz-litecoinz-equihash-pow.30445/page-5OK I tried that and it still errors out. Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI. addnode=telnet dnsseed.kemperink.org 29333 rpcuser = user rpcpassword = password server = 1 listen = 1 addnode = 88.86.186.158 addnode = 88.86.186.158: 29333 addnode = 178.32.117.60: 29333 addnode = 85.214.53.137: 29333 addnode = 139.59.145.115: 29333 addnode = 173.249.11.207: 29333 daemon=1 gen=4
|
LitecoinZ - Designed For The Future Join our community on Discord: https://discord.gg/QNcS4Pm Official Website: https://litecoinz.org/
|
|
|
integminer
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 25, 2018, 12:15:51 AM |
|
I am going to use another PC to test then I will submit ticket. please open a detailed issue https://github.com/litecoinz-project/litecoinz/issuesThanks ok I did. I am still getting the error. When I run litecoinzd.exe is stops working when the sync hits 100%. Follow these instructions. https://miningclub.info/threads/ltz-litecoinz-equihash-pow.30445/page-5OK I tried that and it still errors out. Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI. addnode=telnet dnsseed.kemperink.org 29333 rpcuser = user rpcpassword = password server = 1 listen = 1 addnode = 88.86.186.158 addnode = 88.86.186.158: 29333 addnode = 178.32.117.60: 29333 addnode = 85.214.53.137: 29333 addnode = 139.59.145.115: 29333 addnode = 173.249.11.207: 29333 daemon=1 gen=4
|
|
|
|
|
john1010
|
|
January 25, 2018, 01:42:01 PM |
|
When the windows qt wallet will release? I tried many times the present wallet but not luck, I just want to link half of my miner to this coin, but suddenly I have no wallet to use, can someone here has a pool capable to store the minted LTCZ?
|
|
|
|
LTZ-Team (OP)
Jr. Member
Offline
Activity: 387
Merit: 2
|
|
January 25, 2018, 02:05:35 PM |
|
When the windows qt wallet will release? I tried many times the present wallet but not luck, I just want to link half of my miner to this coin, but suddenly I have no wallet to use, can someone here has a pool capable to store the minted LTCZ?
As all zcash forks there isn't a native qt gui. Wallet is included in the node. You can access to the wallet from cli command line (litecoinz-cli / litecoinz-cli.exe) or, after the node is up and running, with the Java Gui included in the windows distribution or downloadable from https://github.com/litecoinz-project/litecoinz-walletNative QT Gui is under development, but because zcash and all other its forks does not have it, it will take time to develop it.
|
LitecoinZ - Designed For The Future Join our community on Discord: https://discord.gg/QNcS4Pm Official Website: https://litecoinz.org/
|
|
|
Serg27ua
Newbie
Offline
Activity: 20
Merit: 0
|
|
January 25, 2018, 02:40:36 PM |
|
I am going to use another PC to test then I will submit ticket. please open a detailed issue https://github.com/litecoinz-project/litecoinz/issuesThanks ok I did. I am still getting the error. When I run litecoinzd.exe is stops working when the sync hits 100%. Follow these instructions. https://miningclub.info/threads/ltz-litecoinz-equihash-pow.30445/page-5OK I tried that and it still errors out. Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI. addnode=telnet dnsseed.kemperink.org 29333 rpcuser = user rpcpassword = password server = 1 listen = 1 addnode = 88.86.186.158 addnode = 88.86.186.158: 29333 addnode = 178.32.117.60: 29333 addnode = 85.214.53.137: 29333 addnode = 139.59.145.115: 29333 addnode = 173.249.11.207: 29333 daemon=1 gen=4 Same problem!!!!It's very bad for reputation of coin!!Soryyy!!!
|
|
|
|
LTZ-Team (OP)
Jr. Member
Offline
Activity: 387
Merit: 2
|
|
January 25, 2018, 02:48:11 PM |
|
I am going to use another PC to test then I will submit ticket. please open a detailed issue https://github.com/litecoinz-project/litecoinz/issuesThanks ok I did. I am still getting the error. When I run litecoinzd.exe is stops working when the sync hits 100%. Follow these instructions. https://miningclub.info/threads/ltz-litecoinz-equihash-pow.30445/page-5OK I tried that and it still errors out. Where do I get this password from? Not sure what account I have to set up. I have successfully installed the wallet. However, it ends up erroring out with the following error and stops. This happens after about 30 sec. Any ideas? I am Running Win 10 1703.
Here is my CONF File and below is the error.
******CONF FILE***** rpcuser=username rpcpassword=`head -c 32 /dev/urandom | base64` server=1 listen=1 addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 gen=1
****ERROR****
[Wed Jan 24 13:34:44 EST 2018] [ERROR] Unexpected error: com.vaklinov.zcashui.ZCashClientCaller$WalletCallException: Error response from wallet: error: couldn't connect to server: EOF reached (code 1) (make sure server is running and you are connecting to the correct RPC port)
at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetSingleStringResponse(ZCashClientCaller.java:965) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonValue(ZCashClientCaller.java:915) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:893) at com.vaklinov.zcashui.ZCashClientCaller.executeCommandAndGetJsonArray(ZCashClientCaller.java:886) at com.vaklinov.zcashui.ZCashClientCaller.getWalletZAddresses(ZCashClientCaller.java:263) at com.vaklinov.zcashui.AddressesPanel.getAddressBalanceDataFromWallet(AddressesPanel.java:335) at com.vaklinov.zcashui.AddressesPanel.access$000(AddressesPanel.java:62) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:134) at com.vaklinov.zcashui.AddressesPanel$1.gatherData(AddressesPanel.java:129) at com.vaklinov.zcashui.DataGatheringThread.doOneGathering(DataGatheringThread.java:182) at com.vaklinov.zcashui.DataGatheringThread.run(DataGatheringThread.java:163)
Hi there, above all set a right rpcpassword. After you must run the daemon "litecoinzd.exe" and after you can open the GUI. addnode=telnet dnsseed.kemperink.org 29333 rpcuser = user rpcpassword = password server = 1 listen = 1 addnode = 88.86.186.158 addnode = 88.86.186.158: 29333 addnode = 178.32.117.60: 29333 addnode = 85.214.53.137: 29333 addnode = 139.59.145.115: 29333 addnode = 173.249.11.207: 29333 daemon=1 gen=4 Same problem!!!!It's very bad for reputation of coin!!Soryyy!!! Serg27ua, you are wrong. it's a very bad reputation of newbie LOL Please check litecoinz.conf and paste here the content. Looking at your past post I see very strange things inside your file.
|
LitecoinZ - Designed For The Future Join our community on Discord: https://discord.gg/QNcS4Pm Official Website: https://litecoinz.org/
|
|
|
a16686189
Newbie
Offline
Activity: 41
Merit: 0
|
|
January 25, 2018, 02:53:42 PM |
|
I need to study whitebook。
|
|
|
|
jackjackfly
Member
Offline
Activity: 322
Merit: 10
To buy or not to buy - that is the question ;)
|
|
January 25, 2018, 03:06:45 PM |
|
Wallet, pool? Can someone give some more information. As it sounds interesting, but wanna know more, information just a few
|
|
|
|
LTZ-Team (OP)
Jr. Member
Offline
Activity: 387
Merit: 2
|
|
January 25, 2018, 03:12:08 PM Last edit: March 29, 2018, 02:08:29 PM by LTZ-Team |
|
Road Map, Mining Pools and other infos: LitecoinZ 1.0.14 is available!Donations for supporting developers are welcome: bitcoin:1N2rQimKbeUQA8N2LU5vGopYQJmZsBM2d6 Thanks Githubhttps://github.com/litecoinz-project/litecoinzOfficial LitecoinZ Websitehttps://litecoinz.info/Linux / Windows Wallet Setuphttps://github.com/litecoinz-project/litecoinz/blob/master/README.mdCommunity supported LitecoinZ Discordhttps://discord.gg/9ftFxhF(Thanks to "@egyptianbman" for supporting LitecoinZ project) Pools where you can mine LTZ (Provided from community users)http://litecoinz.coinminer.space:8080/getting_startedhttps://equipool.1ds.us/getting_startedhttps://ltz.magnificentpool.com/http://www.pcmining.xyz/Nodes:addnode=88.86.186.158:29333 addnode=178.32.117.60:29333 addnode=85.214.53.137:29333 addnode=139.59.145.115:29333 addnode=173.249.11.207:29333 What is LitecoinZ?LitecoinZ is a decentralized cryptocurrency based bitcoin compatible on the Zcash core. It utilizes the Equihash algorithm with ZK-snarks, T-addresses and anonymous Z-addresses. By combining the technologies, LitecoinZ is able to operate as a cryptocurrency with an ability to provide processor unit mining to people worldwide. Specifications- Name: LitecoinZ - Symbol: LTZ - Bitcoin technology - Anonymous transactions (zk-SNARKs privacy) - Bitcoin has all transactions publicly available. - Decentralized GPU mining (ASIC miners are banned, hardforks to prevent ASIC miners are allowed) - Decentralized development / All contributors are volunteers - Cryptography: EQUIHASH - Maximum Coins: 84.000.000 - Block Rewards: 50 coins (No develovers rewards! 100% to miners - Every 4 years the Block Reward will be subject to Halving just like Bitcoin) - Only 5000 blocks premine. - Block Time: 2.5 minutes - P2P Port: 29333 - RPC Port: 29332 ROAD MAPSame Zcash Road Map plus: LTZ Core Client for Linux (100%) LTZ Core Client for Windows (100%) LTZ Core Client for MAC (0%) Block Explorer (100%) Java GUI Wallet Release (100%) Mining Pools (25%) Native QT Wallet for Windows and Linux Users (Jan2018) Exchange Listing (WIP) Mobile Wallet (iOS & Android) (2H2018) eCommerce Plugins (1H2019) Community ideas development (TBD) Public Relations (50%)
|
LitecoinZ - Designed For The Future Join our community on Discord: https://discord.gg/QNcS4Pm Official Website: https://litecoinz.org/
|
|
|
Headshotsepp
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 25, 2018, 04:47:04 PM |
|
|
|
|
|
Headshotsepp
Newbie
Offline
Activity: 36
Merit: 0
|
|
January 25, 2018, 04:48:41 PM |
|
Just use this instruction to get your wallet working, if it won’t sync del the command „gen=1“ in your litecoinz.conf file
|
|
|
|
Bfljosh
|
|
January 25, 2018, 05:04:48 PM |
|
Again. What are the exchange plans? Just tell me what you are working on. Has there been communication with an exchange?
I can not keep mining a coin when there are no plans.
You can't ignore these kind of questions.
|
|
|
|
|