Baikal X10 ⚡OVERCLOCK⚡ Claim reward 0.2 BTC for TUTORIAL HOW TO :)⚡⚡⚡⚡

[OSMIUMCOIN]

Hi guys ,




Pay 0.2 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz




How to claim 0.2 ? Must show me video on PM

ESCROW

[1714054370]

1714054370

[1714054370]

1714054370

[1714054370]

1714054370

[1714054370]

1714054370

[maleemk]

Hi guys ,




Pay 0.1 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz




How to claim 0.1 ? Must show me video on PM

ESCROW

Add 0.1 BTC from me also. But needs to by stable and proven.

[Dlikrot]

Baikals pictures show them running at 400 somthing, so I think it’s no harm..unless you mine with x11 maybe.

Would like to try it, but 0.1 btc is too steep when I haven’t got many miners..

[OSMIUMCOIN]

Guys please help how to ⚡OVERCLOCK⚡

[OSMIUMCOIN]

NOW !!! Pay 0.2 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz [/size]

[bittawm]

watching

[denax]

0.2 BTC from me as well, but for someone who could modify the A3 firmware to mine Blake2s instead of Blake2b,  To mine Verge.

[senseless]

I just downloaded the X10 firmware for another project. I'll take a look and see what I can find out. If someone would like to give me access to one so I can snoop around a live system I'd appreciate it. I can teamviewer into a PC and then ssh to the miner from there.

0.2 BTC from me as well, but for someone who could modify the A3 firmware to mine Blake2s instead of Blake2b,  To mine Verge.

Probably not possible..

[senseless]

I figured out how to change the clock rate... Anyone care to give me access to their miner to test?

And, looking at the code, I think it'll be possible to get these things to multi-mine too.

[bittawm]

I figured out how to change the clock rate... Anyone care to give me access to their miner to test?

And, looking at the code, I think it'll be possible to get these things to multi-mine too.

watching you senseless

[burnsauce]

I figured out how to change the clock rate... Anyone care to give me access to their miner to test?

And, looking at the code, I think it'll be possible to get these things to multi-mine too.

Can you share what you found (or give a hint)? I can poke around myself on a live system and report back.

It would not be possible to give you access to my system, sorry. However, I do think we can work together to solve this.

[fabfab82]

After you guys have found it, could you also have a look at the giant B? 

[senseless]

percy_tc has an x10 and is going to allow me to test on his. Once I get confirmation of success I'll let you guys know.

[asgardcfr]

I have a X10, i look with console and script are located to :/opt/scripta/etc/ for conf and /opt/scripta/bin/sgminer for exe

sgminer version is :5-6-2-1(or l)

So if someone know variable of this version to overclock, you can post here  

Up: probably special version because we use "baikal-fan" :"100" ;

Up2:

Code:

sgminer 5.6.2-l
Usage: /opt/scripta/bin/sgminer [-kDdElLLmpPQqUsTouvOchnV]
Options for both config file and command line:
--algorithm|--kernel|-k <arg> Set mining algorithm and most common defaults, default: scrypt
--api-allow <arg>   Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets]
--api-description <arg> Description placed in the API status header, default: sgminer version
--api-groups <arg>  API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cmds a groups can use
--api-listen        Enable API, default: disabled
--api-mcast         Enable API Multicast listener, default: disabled
--api-mcast-addr <arg> API Multicast listen address
--api-mcast-code <arg> Code expected in the API Multicast message, don't use '-'
--api-mcast-des <arg> Description appended to the API Multicast reply, default: ''
--api-mcast-port <arg> API Multicast listen port (default: 4028)
--api-network       Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1
--api-port <arg>    Port number of miner API (default: 4028)
--balance           Change multipool strategy from failover to even share balance
--blake-compact     Set SPH_COMPACT_BLAKE64 for Xn derived algorithms (Can give better hashrate for some GPUs)
--compact           Use compact display without per device statistics
--debug|-D          Enable debug output
--debug-log         Enable debug logging when stderr is redirected to file
--default-profile <arg> Set Default Profile
--description <arg> Pool description
--device|-d <arg>   Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all
--disable-rejecting Automatically disable pools that continually reject shares
--expiry|-E <arg>   Upper bound on how many seconds after getting work we consider a share from it stale (default: 28)
--event-on <arg>    Select event type to perform task on
--event-runcmd <arg> Command to perform on event
--event-reboot <arg> Reboot the system on event
--event-reboot-delay <arg> Delay in seconds to wait before rebooting
--event-quit <arg>  Quit sgminer on event
--event-quit-message <arg> Quit message when quitting sgminer on event
--failover-only     Don't leak work to backup pools when primary pool is lagging
--failover-switch-delay <arg> Delay in seconds before switching back to a failed pool (default: 60)
--fix-protocol      Do not redirect to a different getwork protocol (eg. stratum)
--incognito         Do not display user name in status window
--hotplug <arg>     Seconds between hotplug checks (0 means never check)
--more-notices      Shows work restart and new block notices, hidden by default
--load-balance      Change multipool strategy from failover to quota based balance
--log|-l <arg>      Interval in seconds between log output (default: 5)
--log-file|-L <arg> Log stderr to file
--log-show-date|-L  Show date on every log line
--lowmem            Minimise caching of shares for low memory applications
--monitor|-m <arg>  Use custom pipe cmd for output messages
--name|--pool-name <arg> Name of pool
--net-delay         Impose small delays in networking to not overload slow routers
--nfactor <arg>     Override default scrypt N-factor parameter.
--no-client-reconnect Disable 'client.reconnect' stratum functionality
--no-restart        Do not attempt to restart GPUs that hang
--no-submit-stale   Don't submit shares if they are detected as stale
--no-extranonce|--pool-no-extranonce Disable 'extranonce' stratum subscribe for pool
--pass|--pool-pass|-p <arg> Password for bitcoin JSON-RPC server
--per-device-stats  Force verbose mode and output per-device statistics
--pool-algorithm|--pool-kernel|--pool-algo <arg> Set algorithm for pool
--pool-backup       Mark this pool as a backup for simple connect strategy
--extranonce|--pool-extranonce <arg> Enable 'extranonce' stratum subscribe for pool
--priority|--pool-priority <arg> Pool priority
--profile-algorithm|--profile-kernel <arg> Set algorithm for profile
--protocol-dump|-P  Verbose dump of protocol-level activities
--queue|-Q <arg>    Minimum number of work items to have queued (0+) (default: 1)
--quiet|-q          Disable logging output, display status and errors
--quota|--pool-quota|-U <arg> quota;URL combination for server with load-balance strategy quotas
--real-quiet        Disable all output
--remove-disabled   Remove disabled devices entirely, as if they didn't exist
--rotate <arg>      Change multipool strategy from failover to regularly rotate at N minutes (default: 0)
--round-robin       Change multipool strategy from failover to round robin on failure
--scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds (default: 60)
--sched-start <arg> Set a time of day in HH:MM to start mining (a once off without a stop time)
--sched-stop <arg>  Set a time of day in HH:MM to stop mining (will quit without a start time)
--sharelog <arg>    Append share log to file
--shares <arg>      Quit after mining N shares (default: unlimited)
--socks-proxy <arg> Set socks4 proxy (host:port)
--show-coindiff     Show coin difficulty rather than hash value of a share
--state|--pool-state <arg> Specify pool state at startup (default: enabled)
--keepalive|--pool-keepalive <arg> Specify pool if keepalived method is used (default: false)
--switcher-mode <arg> Algorithm/gpu settings switcher mode.
--syslog            Use system log for output messages (default: standard error)
--tcp-keepalive <arg> TCP keepalive packet idle time (default: 30)
--text-only|-T      Disable ncurses formatted screen output
--url|--pool-url|-o <arg> URL for bitcoin JSON-RPC server
--usb <arg>         USB device selection
--user|--pool-user|-u <arg> Username for bitcoin JSON-RPC server
--verbose|-v        Log verbose output to stderr as well as status output
--vote <arg>        Optional vote value for decred blocks (default: 0)
--watchpool-refresh <arg> Interval in seconds to refresh pool status (default: 30)
--userpass|--pool-userpass|-O <arg> Username:Password pair for bitcoin JSON-RPC server
--worktime          Display extra work time debug information
--difficulty-multiplier <arg> (deprecated) Difficulty multiplier for jobs received from stratum pools
--baikal-options <arg> Set baikal options clock:recover temp:cutoff temp
--baikal-fan <arg>  Set baikal fan speed(percent)
--enable-nicehashsma Use extra wide display without toggling
Options for command line only:
--config|-c <arg>   Load a JSON-format configuration file
See example.conf for an example configuration.
--default-config <arg> Specify the filename of the default config file
Loaded at start and used when saving without a name.
--remote-config-retry <arg> Number of times to retry downloading remote config file. Default: 3 (default: 3)
--remote-config-wait <arg> Time in seconds to wait between download retries of remote config files. Default: 10secs (default: 10)
--remote-config-usecache Use cached copy of the remote config file when download fails. Default: No
--help|-h           Print this message
--ndevs|-n          Display all USB devices and exit
--version|-V        Display version and exit

[senseless]

After getting access to a X10 I was able to verify that it will NOT work. The baikal-options setting is being completely ignored in this software. I also tried to discover which algos are the ones that are working but hidden. It's not included in this compile of sgminer either. I tried every one it could possibly be to no avail.

I'm still working on it. It'll just take a little longer than expected.

[coingotrade]

I have successfuly overclocked the miner to 400mhz, however the controller's firmware has a fixed hashrate so overclocking makes 0 difference.

[Nokio2010]

NOW !!! Pay 0.2 BTC for working tutorial how to OVERCLOCK Baikal x10
from 300MHz to 400 Mhz [/size]

https://i.imgur.com/k9pvI7u.jpg

Can you show the screen with overclocked system?

[asgardcfr]

I can overclock to 1Ghz with no evidence, please give me all your money  

[DVD_GR]

pi zero can also be overclocked

[Baikalek]

Here on the video you can see that the chips are running at 420 Mhz. But even so, the hashrate is as good as the chips at 300 Mhz. Because Baikal Giant X10 has two hashrate of 5 and 10 GH, I think the frequencies will be set for each algorithm separately.

https://i.imgur.com/2E0VP0r.jpg