OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1

Pages: << < (3289/3370) > >>

Brianna007:

I too am having the same problem after upgrading from Fedora 23 to Fedora 24 and trying to recompile CGMiner. Some of the research I have done points to it being the newer gcc version 6 in Fedora 24 (was 5.3 in Fedora 23). I have not found a work around though. If I come up with something I will pass it along.

-Brianna007

Quote from: Rufus_Lenhador on June 20, 2016, 01:06:36 AM
--
Trying to compile latest cgminer on Arch Linux.
Getting lots of errors like these:

Code:
--
miner.h:228:21: error: storage size of 'bitforce_drv' isn't known
DRIVER_ADD_COMMAND(bitforce) \
^
miner.h:258:47: note: in definition of macro 'DRIVER_PROTOTYPE'
#define DRIVER_PROTOTYPE(X) struct device_drv X##_drv;
^
miner.h:254:2: note: in expansion of macro 'FPGA_PARSE_COMMANDS'
FPGA_PARSE_COMMANDS(DRIVER_ADD_COMMAND) \
^~~~~~~~~~~~~~~~~~~
miner.h:267:1: note: in expansion of macro 'DRIVER_PARSE_COMMANDS'
DRIVER_PARSE_COMMANDS(DRIVER_PROTOTYPE)
^~~~~~~~~~~~~~~~~~~~~
miner.h:229:21: error: storage size of 'modminer_drv' isn't known
DRIVER_ADD_COMMAND(modminer)
^
miner.h:258:47: note: in definition of macro 'DRIVER_PROTOTYPE'
#define DRIVER_PROTOTYPE(X) struct device_drv X##_drv;
^
miner.h:254:2: note: in expansion of macro 'FPGA_PARSE_COMMANDS'
FPGA_PARSE_COMMANDS(DRIVER_ADD_COMMAND) \
^~~~~~~~~~~~~~~~~~~
miner.h:267:1: note: in expansion of macro 'DRIVER_PARSE_COMMANDS'
DRIVER_PARSE_COMMANDS(DRIVER_PROTOTYPE)
--

Any help?

--

kano:

It's a new rule in the latest gcc that fails the DRIVER_ADD_COMMAND macro in miner.h

A quick work around so you can compile miner.h and usbutils.c is to change 2 places in miner.h and 1 place in usbutils.c

Firstly:
https://github.com/ckolivas/cgminer/blob/master/miner.h#L236
Code:
--
#define FPGA_PARSE_COMMANDS(DRIVER_ADD_COMMAND) \
   DRIVER_ADD_COMMAND(bitforce) \
   DRIVER_ADD_COMMAND(modminer)

--

change the above #define to just be:
Code:
--
#define FPGA_PARSE_COMMANDS(DRIVER_ADD_COMMAND)

--
(note remove the '\' on the end also)

and Secondly:
https://github.com/ckolivas/cgminer/blob/master/miner.h#L236
Code:
--
#define ASIC_PARSE_COMMANDS(DRIVER_ADD_COMMAND) \
.
.
.

--
remove all the driver lines below it that you didn't include in your ./configure command.

e.g. if you
CFLAGS="-O2 -Wall -march=native" ./configure --enable-icarus

Then the changed result would just be:
Code:
--
#define ASIC_PARSE_COMMANDS(DRIVER_ADD_COMMAND) \
   DRIVER_ADD_COMMAND(icarus)

--
(a '\' after every line but the last line)

Thirdly in usbutils.c
https://github.com/ckolivas/cgminer/blob/master/usbutils.c#L3744

Remove all the "case DRIVER_*" lines but the ones you compiled in e.g. for only icarus, change it to just be:
Code:
--
switch (cgpu->drv->drv_id) {
   case DRIVER_icarus:
   DEVWLOCK(cgpu, pstate);
   release_cgpu(cgpu);
   DEVWUNLOCK(cgpu, pstate);
   count++;
   break;
   default:
   break;
   }

--

Polyatomic:

Could also try building with clang its available in EPEL.
Code:
--
milton@milton:~/temp/cgminer$ clang --version
clang version 3.8.0 (tags/RELEASE_380/final)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/bin

--
buildlog here: http://dpaste.com/3Z7962Z
got it going with some old gear here:
Code:
--
cgminer version 4.9.2 - Started: [2016-07-16 12:24:27.338]
--------------------------------------------------------------------------------
(5s):37.26G (1m):37.85G (5m):24.31G (15m):11.01G (avg):37.62Gh/s
A:2000 R:0 HW:2 WU:525.1/m
Connected to stratum.ckpool.org diff 1K with stratum as user 1PKN98VN2z5gwSGZvGKS2bj8aADZBkyhkZ.0
Block: 4454ec80... Diff:213G Started: [12:25:55.222] Best share: 1.71K
--------------------------------------------------------------------------------
[U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
0: ANU 0 : 250MHz | 3.301G / 1.926Gh/s WU:26.9/m
1: ANU 1 : 250MHz | 3.030G / 2.105Gh/s WU:29.4/m
2: ANU 2 : 250MHz | 1.461G / 2.270Gh/s WU:31.7/m
3: ANU 3 : 250MHz | 2.177G / 1.678Gh/s WU:23.5/m
4: ANU 4 : 250MHz | 2.614G / 2.174Gh/s WU:30.4/m
5: ANU 5 : 250MHz | 1.917G / 1.912Gh/s WU:26.7/m
6: ANU 6 : 250MHz | 2.579G / 2.022Gh/s WU:28.3/m
7: ANU 7 : 250MHz | 1.733G / 1.555Gh/s WU:21.7/m
8: ANU 8 : 250MHz | 950.8M / 1.926Gh/s WU:26.9/m
9: ANU 9 : 250MHz | 3.413G / 1.857Gh/s WU:26.0/m
10: ANU 10 : 250MHz | 2.224G / 2.174Gh/s WU:30.4/m
11: ANU 11 : 250MHz | 2.550G / 2.022Gh/s WU:28.3/m
12: ANU 12 : 250MHz | 1.348G / 1.857Gh/s WU:26.0/m
13: ANU 13 : 250MHz | 5.615G / 2.201Gh/s WU:30.8/m
14: ANU 14 : 250MHz | 2.573G / 2.009Gh/s WU:28.1/m
15: ANU 15 : 250MHz | 2.950G / 1.775Gh/s WU:24.8/m
16: ANU 16 : 250MHz | 2.231G / 1.981Gh/s WU:27.7/m
17: ANU 17 : 250MHz | 2.598G / 1.981Gh/s WU:27.7/m
18: ANU 18 : 250MHz | 2.181G / 2.174Gh/s WU:30.0/m
--------------------------------------------------------------------------------
[2016-07-16 12:24:05.797] Started cgminer 4.9.2
[2016-07-16 12:24:26.338] Probing for an alive pool
[2016-07-16 12:24:26.912] Pool 0 difficulty changed to 1000
[2016-07-16 12:24:27.182] Pool 0 message: Authorised, welcome to solo.ckpool.org 1PKN98VN2z5gwSGZvGKS2bj8aADZBkyhkZ!
[2016-07-16 12:24:27.339] Network diff set to 213G
[2016-07-16 12:25:55.222] Stratum from pool 0 detected new block at height 420910
[2016-07-16 12:27:14.942] Pool 0 message: New best ever share for user: 1100.238928
[2016-07-16 12:27:14.942] Stratum reconnect requested from pool 0 to stratum.ckpool.org:443
[2016-07-16 12:27:15.873] Pool 0 difficulty changed to 1000
[2016-07-16 12:27:16.100] Stratum from pool 0 requested work restart
[2016-07-16 12:27:16.101] Pool 0 message: Authorised, welcome to solo.ckpool.org 1PKN98VN2z5gwSGZvGKS2bj8aADZBkyhkZ!
[2016-07-16 12:27:50.230] Accepted 400ca180 Diff 1.02K/1000 ANU 13
[2016-07-16 12:28:58.395] Pool 0 message: New best ever share for user: 1713.233558
[2016-07-16 12:28:58.395] Accepted 264091fc Diff 1.71K/1000 ANU 4

--

Buchi-88:

I have an problem with the cgminer and th U3, anyone have an idea?
Quote
--
cgminer version 4.9.2 - Started: [2016-07-30 23:57:50.402]
--------------------------------------------------------------------------------
(5s):1.349M (1m):9.538G (5m):28.75G (15m):18.21G (avg):43.79Gh/s
A:4898 R:0 HW:4 WU:612.0/m
Connected to multiple pools with block change notify
Block: 6084db13... Diff:2.52M Started: [00:03:33.486] Best share: 16.1K
--------------------------------------------------------------------------------
USB management Pool management Settings Display options Quit
0: AU3 0 : 225MHz 775mV | 1.349M / 43.79Gh/s WU:612.0/m
--------------------------------------------------------------------------------
[2016-07-31 00:06:45.165] AU3 0: Idle for more than 60 seconds, declaring SICK!
[2016-07-31 00:06:45.167] AU3 0: Attempting to restart
--

???

-ck:

Quote from: Buchi-88 on July 30, 2016, 10:37:30 PM
--
I have an problem with the cgminer and th U3, anyone have an idea?
Quote
--
cgminer version 4.9.2 - Started: [2016-07-30 23:57:50.402]
--------------------------------------------------------------------------------
(5s):1.349M (1m):9.538G (5m):28.75G (15m):18.21G (avg):43.79Gh/s
A:4898 R:0 HW:4 WU:612.0/m
Connected to multiple pools with block change notify
Block: 6084db13... Diff:2.52M Started: [00:03:33.486] Best share: 16.1K
--------------------------------------------------------------------------------
USB management Pool management Settings Display options Quit
0: AU3 0 : 225MHz 775mV | 1.349M / 43.79Gh/s WU:612.0/m
--------------------------------------------------------------------------------
[2016-07-31 00:06:45.165] AU3 0: Idle for more than 60 seconds, declaring SICK!
[2016-07-31 00:06:45.167] AU3 0: Attempting to restart
--

???

--
Looks typical of the U3, it's a steaming pile of shit and it's started failing for you.

Pages: << < (3289/3370) > >>