Aeonstar2000
Newbie
 Offline
Activity: 2
Merit: 0
|
 |
January 31, 2014, 11:41:34 AM |
|
How do i contact support directly?  |
|
|
|
|
|
|
|
|
|
|
|
|
|
TalkImg was created especially for hosting images on bitcointalk.org: try it next time you want to post an image
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
zurg
|
|
January 31, 2014, 12:17:58 PM |
|
|
|
|
|
|
|
daddyfatsax
|
|
February 04, 2014, 01:16:46 AM
Last edit: February 04, 2014, 02:12:10 AM by daddyfatsax |
|
So I get home today and only one of my 8 cards is hashing. I have no clue where to start. The outputs are below. The stratum proxy looks good, not sure what happened and why the other 7 boards will not work. I have re-seated all the cards, tried rocking them, and moved them around to different slots. Anyone have anything else I can try?
GNU nano 2.2.6 File: /run/shm/.stat.log
1 AIfDSo 52 1.935 1.943 50 0 0 1 0 68 [4:0] 708 3 3 3 3 3 3 3 3 3 4 4 3 3 3 3 3 $
2 AIfDSo 52 1.973 2.028 51 0 0 0 0 71 [4:1] 706 3 3 4 4 4 3 3 3 3 3 3 3 3 3 3 3 $
3 AIfDSo 52 2.360 1.885 61 0 0 0 0 66 [4:2] 697 4 4 4 4 4 3 3 3 4 4 4 4 4 4 4 4 $
4 AIfDSo 52 2.283 1.885 59 0 0 0 0 66 [4:3] 702 4 4 4 4 4 4 3 3 3 3 3 4 4 4 4 4 $
5 AIfDSo 52 1.973 1.943 51 0 0 0 0 68 [4:4] 708 3 3 3 3 3 3 4 4 4 3 3 3 3 3 3 3 $
6 AIfDSo 52 2.051 1.857 53 0 0 0 0 65 [4:5] 703 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 3 $
7 AIfDSo 52 2.244 2.114 58 0 0 0 0 74 [4:6] 699 4 4 4 4 4 4 4 3 3 3 3 3 3 4 4 4 $
8 AIfDSo 52 2.051 1.828 53 0 0 0 0 64 [4:7] 703 3 3 3 3 3 3 4 4 4 4 4 3 3 3 3 3 $
9 AIfDSo 52 1.896 2.028 49 0 0 0 0 71 [4:8] 709 3 3 3 3 3 3 3 3 3 4 3 3 3 3 3 3 $
10 AIfDSo 52 2.322 1.914 60 0 0 0 0 67 [4:9] 697 4 4 3 3 3 3 4 4 4 4 4 4 4 4 4 4 $
11 AIfDSo 52 2.515 2.000 65 0 0 0 0 70 [4:A] 695 4 4 4 4 4 4 4 4 4 5 4 4 4 4 4 4 $
12 AIfDSo 52 2.244 1.943 58 2 0 0 0 68 [4:B] 699 4 4 4 4 4 3 3 3 3 4 4 4 3 4 4 3 $
13 AIfDSo 52 2.283 1.914 59 2 0 0 0 67 [4:C] 697 4 4 3 3 4 4 4 3 3 3 4 4 4 4 4 4 $
14 AIfDSo 52 1.664 1.914 43 0 0 0 0 67 [4:D] 715 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 3 $
15 AIfDSo 52 1.780 1.828 46 1 0 0 0 64 [4:E] 710 3 3 3 3 3 3 3 3 3 3 3 3 1 3 3 3 $
16 AIfDSo 52 1.741 2.085 45 0 0 0 0 73 [4:F] 712 3 3 3 3 3 2 2 2 3 3 3 3 3 3 3 3 $
17 AIfDSo 52 0.000 1.571 0 571 37 56 17 55 [5:0] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
18 AIfDSo 52 0.000 1.714 0 582 42 23 13 60 [5:1] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
19 AIfDSo 52 0.000 1.714 0 588 46 25 23 60 [5:2] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
20 AIfDSo 52 0.000 1.543 0 541 41 32 18 54 [5:3] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
21 AIfDSo 52 0.000 1.857 0 619 45 23 9 65 [5:4] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
22 AIfDSo 52 0.000 1.657 0 593 41 31 10 58 [5:5] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
23 AIfDSo 52 0.000 1.828 0 616 51 32 4 64 [5:6] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
24 AIfDSo 52 0.000 1.600 0 572 38 35 4 56 [5:7] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
25 AIfDSo 52 0.000 1.828 0 629 47 24 4 64 [5:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
26 AIfDSo 52 0.000 1.657 0 530 41 31 14 58 [5:9] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
27 AIfDSo 52 0.000 1.514 0 553 41 31 10 53 [5:A] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
28 AIfDSo 52 0.000 1.685 0 589 43 27 5 59 [5:B] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
29 AIfDSo 52 0.000 1.571 0 526 41 29 10 55 [5:C] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
30 AIfDSo 52 0.000 1.628 0 572 45 33 10 57 [5:D] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
31 AIfDSo 52 0.000 1.971 0 620 51 27 15 69 [5:E] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
32 AIfDSo 52 0.000 1.800 0 610 49 24 11 63 [5:F] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
33 AIfDSo 52 0.000 1.657 0 577 42 29 10 58 [6:0] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
34 AIfDSo 52 0.000 1.714 0 533 44 27 9 60 [6:1] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
35 AIfDSo 52 0.000 1.485 0 520 41 32 17 52 [6:2] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
[ Read 70 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Page ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where Is ^V Next Page ^U UnCut Text ^T To Spell
GNU nano 2.2.6 File: /run/shm/.stat.log
34 AIfDSo 52 0.000 1.714 0 533 44 27 9 60 [6:1] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
35 AIfDSo 52 0.000 1.485 0 520 41 32 17 52 [6:2] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
36 AIfDSo 52 0.000 1.714 0 634 41 25 14 60 [6:3] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
37 AIfDSo 52 0.000 1.857 0 668 43 30 10 65 [6:4] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
38 AIfDSo 52 0.000 1.657 0 576 44 30 8 58 [6:5] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
39 AIfDSo 52 0.000 1.657 0 577 43 31 8 58 [6:6] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
40 AIfDSo 52 0.000 1.571 0 582 45 29 6 55 [6:7] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
41 AIfDSo 52 0.000 1.800 0 576 43 30 8 63 [6:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
42 AIfDSo 52 0.000 1.657 0 572 40 31 6 58 [6:9] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
43 AIfDSo 52 0.000 1.400 0 540 37 33 10 49 [6:A] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
44 AIfDSo 52 0.000 1.743 0 588 45 27 11 61 [6:B] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
45 AIfDSo 52 0.000 1.828 0 599 45 28 2 64 [6:C] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
46 AIfDSo 52 0.000 1.771 0 601 45 24 9 62 [6:D] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
47 AIfDSo 52 0.000 1.543 0 623 43 32 8 54 [6:E] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
48 AIfDSo 52 0.000 1.628 0 648 40 28 19 57 [6:F] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
49 AIfDSo 52 0.000 1.771 0 616 46 30 10 62 [7:0] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
50 AIfDSo 52 0.000 1.771 0 609 44 33 11 62 [7:1] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
51 AIfDSo 52 0.000 1.714 0 578 41 30 10 60 [7:2] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
52 AIfDSo 52 0.000 1.800 0 590 51 27 11 63 [7:3] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
53 AIfDSo 52 0.000 1.543 0 541 46 31 9 54 [7:4] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
54 AIfDSo 52 0.000 1.628 0 572 39 31 9 57 [7:5] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
55 AIfDSo 52 0.000 1.657 0 564 41 29 7 58 [7:6] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
56 AIfDSo 52 0.000 2.028 0 648 55 27 10 71 [7:7] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
57 AIfDSo 52 0.000 1.771 0 612 44 32 12 62 [7:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
58 AIfDSo 52 0.000 1.714 0 578 48 32 10 60 [7:9] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
59 AIfDSo 52 0.000 1.657 0 552 45 33 12 58 [7:A] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
60 AIfDSo 52 0.000 1.743 0 592 46 21 7 61 [7:B] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
61 AIfDSo 52 0.000 1.943 0 649 49 24 12 68 [7:C] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
62 AIfDSo 52 0.000 2.028 0 660 52 26 11 71 [7:D] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
63 AIfDSo 52 0.000 1.485 0 524 39 37 11 52 [7:E] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
64 AIfDSo 52 0.000 1.771 0 557 51 30 11 62 [7:F] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 $
speed:3328 noncerate[GH/s]:33.315 (0.521/chip) hashrate[GH/s]:112.952 good:861 errors:28172 spi-err:2117 miso-err:1423 duplicates:495 jobs:120 $
board-2 speed nrate hrate good errors spi-err miso-er duplic good bad off per chip good cores
4: 832 33.315 31.109 861 5 0 1 0 16 0 0 (2.082/chip) 7%
5: 832 0.000 27.138 0 9311 699 483 177 16 0 0 (0.000/chip) 0%
[ Read 70 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Page ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where Is ^V Next Page ^U UnCut Text ^T To Spell
OB 451 PROCESSED 0.002 sec [nonces:8 errors:257 spi:16 miso:15 dup:3] (queue:4)
JOB 452 PROCESSED 0.004 sec [nonces:8 errors:217 spi:16 miso:12 dup:4] (queue:2)
JOB 453 PROCESSED 0.001 sec [nonces:11 errors:194 spi:11 miso:13 dup:7] (queue:1)
JOB 454 PROCESSED 0.002 sec [nonces:7 errors:243 spi:22 miso:12 dup:10] (queue:4)
JOB 455 PROCESSED 0.001 sec [nonces:4 errors:245 spi:15 miso:11 dup:5] (queue:1)
JOB 456 PROCESSED 0.002 sec [nonces:8 errors:315 spi:22 miso:10 dup:3] (queue:1)
JOB 457 PROCESSED 0.001 sec [nonces:10 errors:244 spi:25 miso:12 dup:2] (queue:3)
JOB 458 PROCESSED 0.002 sec [nonces:10 errors:277 spi:17 miso:11 dup:6] (queue:2)
JOB 459 PROCESSED 0.002 sec [nonces:5 errors:288 spi:22 miso:9 dup:4] (queue:1)
JOB 460 PROCESSED 0.001 sec [nonces:5 errors:173 spi:11 miso:14 dup:4] (queue:0)
JOB 461 PROCESSED 0.001 sec [nonces:8 errors:222 spi:13 miso:14 dup:6] (queue:1)
JOB 462 PROCESSED 0.002 sec [nonces:6 errors:265 spi:21 miso:12 dup:2] (queue:1)
JOB 463 PROCESSED 0.002 sec [nonces:15 errors:223 spi:17 miso:12 dup:7] (queue:4)
JOB 464 PROCESSED 0.002 sec [nonces:6 errors:278 spi:20 miso:13 dup:1] (queue:2)
JOB 465 PROCESSED 0.002 sec [nonces:9 errors:233 spi:20 miso:13 dup:10] (queue:4)
JOB 466 PROCESSED 0.001 sec [nonces:7 errors:238 spi:24 miso:12 dup:2] (queue:2)
JOB 467 PROCESSED 0.002 sec [nonces:2 errors:269 spi:19 miso:13 dup:4] (queue:0)
JOB 468 PROCESSED 0.002 sec [nonces:11 errors:198 spi:17 miso:13 dup:2] (queue:3)
JOB 469 PROCESSED 0.002 sec [nonces:4 errors:241 spi:20 miso:10 dup:2] (queue:0)
JOB 470 PROCESSED 0.003 sec [nonces:11 errors:265 spi:29 miso:12 dup:3] (queue:5)
JOB 471 PROCESSED 0.002 sec [nonces:13 errors:256 spi:19 miso:15 dup:8] (queue:2)
JOB 472 PROCESSED 0.002 sec [nonces:10 errors:219 spi:17 miso:12 dup:5] (queue:4)
JOB 473 PROCESSED 0.002 sec [nonces:13 errors:245 spi:20 miso:10 dup:6] (queue:4)
JOB 474 PROCESSED 0.002 sec [nonces:5 errors:263 spi:23 miso:13 dup:3] (queue:0)
JOB 475 PROCESSED 0.002 sec [nonces:8 errors:187 spi:14 miso:10 dup:2] (queue:1)
JOB 476 PROCESSED 0.002 sec [nonces:1 errors:238 spi:18 miso:12 dup:8] (queue:0)
JOB 477 PROCESSED 0.002 sec [nonces:9 errors:256 spi:21 miso:9 dup:7] (queue:2)
JOB 478 PROCESSED 0.002 sec [nonces:6 errors:253 spi:25 miso:10 dup:14] (queue:1)
JOB 479 PROCESSED 0.001 sec [nonces:5 errors:160 spi:16 miso:17 dup:5] (queue:0)
JOB 480 PROCESSED 0.002 sec [nonces:12 errors:262 spi:21 miso:10 dup:5] (queue:3)
JOB 481 PROCESSED 0.002 sec [nonces:6 errors:298 spi:22 miso:11 dup:6] (queue:2)
JOB 482 PROCESSED 0.001 sec [nonces:9 errors:209 spi:17 miso:12 dup:3] (queue:1)
JOB 483 PROCESSED 0.003 sec [nonces:11 errors:312 spi:26 miso:8 dup:2] (queue:2)
JOB 484 PROCESSED 0.001 sec [nonces:8 errors:133 spi:14 miso:13 dup:3] (queue:2)
JOB 485 PROCESSED 0.002 sec [nonces:7 errors:252 spi:16 miso:11 dup:8] (queue:3)
JOB 486 PROCESSED 0.002 sec [nonces:16 errors:262 spi:23 miso:13 dup:11] (queue:7)
JOB 487 PROCESSED 0.002 sec [nonces:7 errors:242 spi:15 miso:11 dup:2] (queue:4)
JOB 488 PROCESSED 0.002 sec [nonces:8 errors:265 spi:19 miso:11 dup:6] (queue:0)
JOB 489 PROCESSED 0.002 sec [nonces:4 errors:246 spi:18 miso:11 dup:6] (queue:2)
Edit: Narrowed it down to 2 bad boards. It appears the solder on the pins has worn down and the cards are not getting good contact on the M-board slots. Not sure how to fix that.
|
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
February 04, 2014, 03:41:37 AM |
|
I have a board that has gone from 450 Gh/s to 135. I have tried everything and can't get more than one card per four slot bay.
|
|
|
|
|
|
zurg
|
|
February 04, 2014, 12:55:33 PM |
|
When some of my cards quit showing up I powered the whole rig down and about 20min later powered it.. all the cards were showing up.
Make sure that none of them vibrate if your fan is blowing on them.
Also try pulling the 1st non working card and move the rest up. I had 1 card go bad like that and it made the rest of them in the chain not show up at all.
|
|
|
|
|
|
daddyfatsax
|
|
February 04, 2014, 04:48:17 PM |
|
When some of my cards quit showing up I powered the whole rig down and about 20min later powered it.. all the cards were showing up.
Make sure that none of them vibrate if your fan is blowing on them.
Also try pulling the 1st non working card and move the rest up. I had 1 card go bad like that and it made the rest of them in the chain not show up at all.
I will try leaving it off for 20 min. My issue is that the first slot for each bank works, ie:0, 4, 8, and C. The rest are not working. No clue what happened. |
|
|
|
|
|
bobcaticus
|
|
February 04, 2014, 07:09:18 PM |
|
ventilation and power are key with 90% of hashing / card issues.
If you don't have a fan pointed at your cards, they will overheat and shut off. Turn the rigs on their left hand side (so the SD card is facing down) and aim a good sized fan towards it.
|
|
|
|
|
|
daddyfatsax
|
|
February 04, 2014, 08:51:06 PM |
|
ventilation and power are key with 90% of hashing / card issues.
If you don't have a fan pointed at your cards, they will overheat and shut off. Turn the rigs on their left hand side (so the SD card is facing down) and aim a good sized fan towards it.
I have 3 120 mm fans pointed right at the cards. I did power everything down and let it sit for half an hour, but that still did not fix my issue. It seems like the cards are not seating correctly in the M-board and therefore not hashing. I have communications with Megabigpower and will probably have to RMA the M-board. It is just weird it all of sudden happened after almost a month of working flawlessly. |
|
|
|
|
|
bobcaticus
|
|
February 04, 2014, 09:02:57 PM |
|
ventilation and power are key with 90% of hashing / card issues.
If you don't have a fan pointed at your cards, they will overheat and shut off. Turn the rigs on their left hand side (so the SD card is facing down) and aim a good sized fan towards it.
I have 3 120 mm fans pointed right at the cards. I did power everything down and let it sit for half an hour, but that still did not fix my issue. It seems like the cards are not seating correctly in the M-board and therefore not hashing. I have communications with Megabigpower and will probably have to RMA the M-board. It is just weird it all of sudden happened after almost a month of working flawlessly. That would be me then  M-boards will be in around Feb 21st due to the delays around Chinese New Year. I do get to work with some of the returns, and yes this sadly does happen. If there's a dead slot or two, i just shuffle cards around until they find a good place. |
|
|
|
|
|
daddyfatsax
|
|
February 04, 2014, 09:10:03 PM |
|
ventilation and power are key with 90% of hashing / card issues.
If you don't have a fan pointed at your cards, they will overheat and shut off. Turn the rigs on their left hand side (so the SD card is facing down) and aim a good sized fan towards it.
I have 3 120 mm fans pointed right at the cards. I did power everything down and let it sit for half an hour, but that still did not fix my issue. It seems like the cards are not seating correctly in the M-board and therefore not hashing. I have communications with Megabigpower and will probably have to RMA the M-board. It is just weird it all of sudden happened after almost a month of working flawlessly. That would be me then M-boards will be in around Feb 21st due to the delays around Chinese New Year. I do get to work with some of the returns, and yes this sadly does happen. If there's a dead slot or two, i just shuffle cards around until they find a good place. Then you probably saw my emails from last night and responded rather quickly. I spent about 4 hours doing that last night. The problem is that it appears that I have more bad slots than I do cards. Right now 5 cards are hashing in 0, 4, 8, 9, and C. I cannot get the 6th card to hash in any spot. Even when I put a card I know hashes in slot 2 or 3, I still get nothing. |
|
|
|
|
cypherdoc
Legendary
Offline
Activity: 1764
Merit: 1002
|
|
February 04, 2014, 09:23:42 PM |
|
ventilation and power are key with 90% of hashing / card issues.
If you don't have a fan pointed at your cards, they will overheat and shut off. Turn the rigs on their left hand side (so the SD card is facing down) and aim a good sized fan towards it.
I have 3 120 mm fans pointed right at the cards. I did power everything down and let it sit for half an hour, but that still did not fix my issue. It seems like the cards are not seating correctly in the M-board and therefore not hashing. I have communications with Megabigpower and will probably have to RMA the M-board. It is just weird it all of sudden happened after almost a month of working flawlessly. That would be me then M-boards will be in around Feb 21st due to the delays around Chinese New Year. I do get to work with some of the returns, and yes this sadly does happen. If there's a dead slot or two, i just shuffle cards around until they find a good place. Then you probably saw my emails from last night and responded rather quickly. I spent about 4 hours doing that last night. The problem is that it appears that I have more bad slots than I do cards. Right now 5 cards are hashing in 0, 4, 8, 9, and C. I cannot get the 6th card to hash in any spot. Even when I put a card I know hashes in slot 2 or 3, I still get nothing. i'm having exactly the same issues. |
|
|
|
|
|
Keefe
|
|
February 05, 2014, 10:55:09 AM |
|
It's unfortunate that they didn't spend the little bit extra to gold plate the contacts on the cards like most PC expansion cards are. I think that would have prevented alot of problems.
|
|
|
|
kano
Legendary
Offline
Activity: 4466
Merit: 1798
Linux since 1997 RedHat 4
|
|
February 05, 2014, 12:34:18 PM |
|
Or that the original design didn't include any temperature sensors anywhere .... I think it was 2011 when I first brought that one up with then BFL, still companies make the same stupid mistake today ... p.s. I finally added tuning to cgminer, options to modify the tuning, and the API stats is full of information about each board ... latest changes are in current git. I fixed more bugs I copied from chainminer also and found an interesting result the boards return that can be ignored and reduce work checking dramatically. API summary+stats output of my one BA board: [0] => SUMMARY
[Elapsed] => 176001
[MHS av] => 41505.75
[MHS 5s] => 43373.70
[Found Blocks] => 0
[Getworks] => 20828
[Accepted] => 58864
[Rejected] => 3328
[Hardware Errors] => 46211
[Utility] => 20.07
[Discarded] => 21684
[Stale] => 25
[Get Failures] => 15
[Local Work] => 2768847
[Remote Failures] => 3
[Network Blocks] => 350
[Total MH] => 7305039289.1326
[Work Utility] => 579.83
[Difficulty Accepted] => 1619791.28726888
[Difficulty Rejected] => 57802.70362325
[Difficulty Stale] => 352.00000000
[Best Share] => 808573
[Device Hardware%] => 2.6451
[Device Rejected%] => 3.3985
[Pool Rejected%] => 3.4448
[Pool Stale%] => 0.0210
[Last getwork] => 1391604057
[STATS] => 0
[ID] => BaB0
[Elapsed] => 176001
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Version] => 2
[Chips] => 16
[Boards] => 1
[Banks] => 1
[Chips Per Bank] => 0 16 0 0 0
[Missing Chips Per Bank] => 0 0 0 0 0
[Device Elapsed] => 176003
[History Enabled] => true
[Chip History Limit] => 300
[Nonces 0-15] => 117283 112518 111587 107190 109769 113981 106979 106443 107113 112412 106065 106157 114316 106283 104793 104409
[Good 0-15] => 111519 106752 109167 105769 108942 109436 103353 105949 106447 104870 105433 105540 109630 104876 101620 101544
[Bad 0-15] => 5749 5751 2405 1406 812 4530 3611 479 651 7527 617 602 4671 1392 3158 2850
[Conf 0-15] => 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b
[Fast 0-15] => 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55
[Spie 0-15] => 14 8 12 8 9 10 12 7 13 14 11 10 83 73 70 58
[Miso 0-15] => 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[HW% 0-15] => 4.902 5.112 2.156 1.312 0.740 3.975 3.376 0.450 0.608 6.697 0.582 0.567 4.087 1.310 3.014 2.730
[GHs 0-15] => 2.721 2.605 2.664 2.581 2.658 2.671 2.522 2.585 2.598 2.559 2.573 2.575 2.675 2.559 2.480 2.478
[Sum GHs 0-15] => 41.506
[Cont-Bad 0-15] => 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[Max-Bad 0-15] => 4 5 3 5 3 4 4 4 4 4 4 3 8 6 5 5
[History Good 0-15] => 179 175 227 186 174 195 185 194 170 192 176 184 193 174 167 167
[History Bad 0-15] => 13 18 3 4 0 10 9 0 3 15 1 0 8 0 3 5
[History HW% 0-15] => 6.771 9.326 1.304 2.105 0.000 4.878 4.639 0.000 1.734 7.246 0.565 0.000 3.980 0.000 1.765 2.907
[History GHs 0-15] => 2.600 2.506 3.244 2.693 2.501 2.785 2.641 2.770 2.434 2.751 2.521 2.627 2.775 2.492 2.383 2.383
[Sum History GHs 0-15] => 42.105
[Total History GHs] => 42.105
[Total History HW%] => 3.036
[History Speed 0.0 Dead] => 0
[History Speed 0.8 V.Slow] => 0
[History Speed 1.6 Slow] => 0
[History Speed 2.2 OK] => 0
[History Speed 2.8 Good] => 15
[History Speed >2.8 Fast] => 1
[History Dead] => None
[History V.Slow] => None
[History Dead Boards] => None
[History Dead Chains] => None
[Nonce Offset 0xff800000] => 890671
[Nonce Offset 0x00000000] => 566858
[Nonce Offset 0xffc00000] => 243318
[Discarded E0s] => 2728775
[Tested] => 1747298
[OK] => 1700847
[Total Tests] => 8977596
[Max Tests] => 16
[Avg Tests] => 5.278
[Untested] => 0
[Work Links] => 3676660
[Work Processed Links] => 3613284
[Max Links] => 8
[Max Processed Links] => 7
[Total Work Links] => 6358964
[Avg Links] => 2.162
[Avg Proc Links] => 2.124
[Avg Work Links] => 3.739
[Fail] => 46211
[Fail Total Tests] => 405639
[Fail Avg Tests] => 8.778
[Fail Work Links] => 173878
[Fail Total Work Links] => 173878
[Initial Ignored] => 240
[Ign Total Tests] => 471
[Ign Work Links] => 0
[Ign Total Work Links] => 0
[WFree Total] => 1024
[WFree Count] => 943
[Available Work] => 16
[SPI Work] => 0
[Chip Work] => 65
[SFree Total] => 8
[SFree Count] => 8
[SPI Waiting] => 0
[SPI Sent] => 0
[RFree Total] => 256
[RFree Count] => 256
[Result Count] => 0
[NFree Total] => 102400
[NFree Used] => 3030
[Delay Count] => 170550
[Delay Min] => 0.899001
[Delay Max] => 5.202787
[Delay Bands] => <0.5=0 <0.7=0 <0.9=5828 <1.1=164717 <1.3=2 <1.5=0 <1.7=0 <1.9=0 <2.1=0 <2.3=0 <2.5=0 >=2.7=3
[Send Count] => 170551
[Send Total] => 14938.829633
[Send Avg] => 0.088
[Send Min] => 0.085179
[Send Max] => 0.113610
[Reply Wait] => 160
[Reply Waits] => 5303
[MaxSpeed] => 55
[DefaultSpeed] => 54
[MinSpeed] => 52
[TuneUp] => 1.000000
[TuneDown] => 10.000000
[SPISpeed] => 96000
[SPIDelayuS] => 0
[TransferDelayuS] => 0
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
The Paid GH/s there (how much the pool accepts) is 39.5GH/s |
|
|
|
|
darkfriend77 (OP)
|
|
February 05, 2014, 12:52:46 PM |
|
I just want to thank you guys ... for the interesting and super exciting time I got with you and the bitfury chips since I started this thread in september ... I will sell my bitfury rigs as long as there is still power in there mining capability ( ebay) ... I got the rigs to 420 GH each with 12 slots occupied ... best results with max. 3 slots filled each column ... I never achieved a stable full setup with 16 cards to go over 500 GH/s for a long period ... but filled at 75% they are stable and run at 35GH each card ... let's see if the nextGen bitfury will be available for the community ... |
|
|
|
CCCrypto
Newbie
Offline
Activity: 28
Merit: 0
|
|
February 05, 2014, 06:28:31 PM
Last edit: February 05, 2014, 07:27:06 PM by CCCrypto |
|
Is there a diagram anywhere online showing all the components of the V1.2 H-cards? (The chips and capacitors are easy enough to spot, but I'd like to know specifically where the regulator is, and the inductor.) I tried reading the schematic, but it wasn't very helpful for me.
Thanks.
|
|
|
|
|
spegelius
Newbie
Offline
Activity: 52
Merit: 0
|
|
February 05, 2014, 07:08:55 PM |
|
Or that the original design didn't include any temperature sensors anywhere .... I think it was 2011 when I first brought that one up with then BFL, still companies make the same stupid mistake today ... p.s. I finally added tuning to cgminer, options to modify the tuning, and the API stats is full of information about each board ... latest changes are in current git. I fixed more bugs I copied from chainminer also and found an interesting result the boards return that can be ignored and reduce work checking dramatically. API summary+stats output of my one BA board: [0] => SUMMARY
[Elapsed] => 176001
[MHS av] => 41505.75
[MHS 5s] => 43373.70
[Found Blocks] => 0
[Getworks] => 20828
[Accepted] => 58864
[Rejected] => 3328
[Hardware Errors] => 46211
[Utility] => 20.07
[Discarded] => 21684
[Stale] => 25
[Get Failures] => 15
[Local Work] => 2768847
[Remote Failures] => 3
[Network Blocks] => 350
[Total MH] => 7305039289.1326
[Work Utility] => 579.83
[Difficulty Accepted] => 1619791.28726888
[Difficulty Rejected] => 57802.70362325
[Difficulty Stale] => 352.00000000
[Best Share] => 808573
[Device Hardware%] => 2.6451
[Device Rejected%] => 3.3985
[Pool Rejected%] => 3.4448
[Pool Stale%] => 0.0210
[Last getwork] => 1391604057
[STATS] => 0
[ID] => BaB0
[Elapsed] => 176001
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Version] => 2
[Chips] => 16
[Boards] => 1
[Banks] => 1
[Chips Per Bank] => 0 16 0 0 0
[Missing Chips Per Bank] => 0 0 0 0 0
[Device Elapsed] => 176003
[History Enabled] => true
[Chip History Limit] => 300
[Nonces 0-15] => 117283 112518 111587 107190 109769 113981 106979 106443 107113 112412 106065 106157 114316 106283 104793 104409
[Good 0-15] => 111519 106752 109167 105769 108942 109436 103353 105949 106447 104870 105433 105540 109630 104876 101620 101544
[Bad 0-15] => 5749 5751 2405 1406 812 4530 3611 479 651 7527 617 602 4671 1392 3158 2850
[Conf 0-15] => 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b 0x1b
[Fast 0-15] => 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55
[Spie 0-15] => 14 8 12 8 9 10 12 7 13 14 11 10 83 73 70 58
[Miso 0-15] => 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[HW% 0-15] => 4.902 5.112 2.156 1.312 0.740 3.975 3.376 0.450 0.608 6.697 0.582 0.567 4.087 1.310 3.014 2.730
[GHs 0-15] => 2.721 2.605 2.664 2.581 2.658 2.671 2.522 2.585 2.598 2.559 2.573 2.575 2.675 2.559 2.480 2.478
[Sum GHs 0-15] => 41.506
[Cont-Bad 0-15] => 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[Max-Bad 0-15] => 4 5 3 5 3 4 4 4 4 4 4 3 8 6 5 5
[History Good 0-15] => 179 175 227 186 174 195 185 194 170 192 176 184 193 174 167 167
[History Bad 0-15] => 13 18 3 4 0 10 9 0 3 15 1 0 8 0 3 5
[History HW% 0-15] => 6.771 9.326 1.304 2.105 0.000 4.878 4.639 0.000 1.734 7.246 0.565 0.000 3.980 0.000 1.765 2.907
[History GHs 0-15] => 2.600 2.506 3.244 2.693 2.501 2.785 2.641 2.770 2.434 2.751 2.521 2.627 2.775 2.492 2.383 2.383
[Sum History GHs 0-15] => 42.105
[Total History GHs] => 42.105
[Total History HW%] => 3.036
[History Speed 0.0 Dead] => 0
[History Speed 0.8 V.Slow] => 0
[History Speed 1.6 Slow] => 0
[History Speed 2.2 OK] => 0
[History Speed 2.8 Good] => 15
[History Speed >2.8 Fast] => 1
[History Dead] => None
[History V.Slow] => None
[History Dead Boards] => None
[History Dead Chains] => None
[Nonce Offset 0xff800000] => 890671
[Nonce Offset 0x00000000] => 566858
[Nonce Offset 0xffc00000] => 243318
[Discarded E0s] => 2728775
[Tested] => 1747298
[OK] => 1700847
[Total Tests] => 8977596
[Max Tests] => 16
[Avg Tests] => 5.278
[Untested] => 0
[Work Links] => 3676660
[Work Processed Links] => 3613284
[Max Links] => 8
[Max Processed Links] => 7
[Total Work Links] => 6358964
[Avg Links] => 2.162
[Avg Proc Links] => 2.124
[Avg Work Links] => 3.739
[Fail] => 46211
[Fail Total Tests] => 405639
[Fail Avg Tests] => 8.778
[Fail Work Links] => 173878
[Fail Total Work Links] => 173878
[Initial Ignored] => 240
[Ign Total Tests] => 471
[Ign Work Links] => 0
[Ign Total Work Links] => 0
[WFree Total] => 1024
[WFree Count] => 943
[Available Work] => 16
[SPI Work] => 0
[Chip Work] => 65
[SFree Total] => 8
[SFree Count] => 8
[SPI Waiting] => 0
[SPI Sent] => 0
[RFree Total] => 256
[RFree Count] => 256
[Result Count] => 0
[NFree Total] => 102400
[NFree Used] => 3030
[Delay Count] => 170550
[Delay Min] => 0.899001
[Delay Max] => 5.202787
[Delay Bands] => <0.5=0 <0.7=0 <0.9=5828 <1.1=164717 <1.3=2 <1.5=0 <1.7=0 <1.9=0 <2.1=0 <2.3=0 <2.5=0 >=2.7=3
[Send Count] => 170551
[Send Total] => 14938.829633
[Send Avg] => 0.088
[Send Min] => 0.085179
[Send Max] => 0.113610
[Reply Wait] => 160
[Reply Waits] => 5303
[MaxSpeed] => 55
[DefaultSpeed] => 54
[MinSpeed] => 52
[TuneUp] => 1.000000
[TuneDown] => 10.000000
[SPISpeed] => 96000
[SPIDelayuS] => 0
[TransferDelayuS] => 0
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
The Paid GH/s there (how much the pool accepts) is 39.5GH/s Just to confirm, this doesn't support Bitfury v1.2 hcards/mcard combo? Compiled with --enable-bitfury and it doesn't find anything. And no mention in ASIC-README about hcards... |
|
|
|
|
kano
Legendary
Offline
Activity: 4466
Merit: 1798
Linux since 1997 RedHat 4
|
|
February 07, 2014, 02:54:49 AM |
|
...
Just to confirm, this doesn't support Bitfury v1.2 hcards/mcard combo? Compiled with --enable-bitfury and it doesn't find anything. And no mention in ASIC-README about hcards...
--enable-bab Bitfury never supported my writing the software and wouldn't even sell me hardware - so it wasn't until someone sent me a BlackArrowBitfury board that I could write and test a driver for it. The detection code and work send command is almost the same logic as chainminer - just less bugs  If they've updated the code and not released (i.e. don't want anyone to support their hardware) then yeah my code won't know about the updates https://github.com/bfsb/chainminer is their code as far as I know ... |
|
|
|
spegelius
Newbie
Offline
Activity: 52
Merit: 0
|
|
February 08, 2014, 10:45:41 AM |
|
...
Just to confirm, this doesn't support Bitfury v1.2 hcards/mcard combo? Compiled with --enable-bitfury and it doesn't find anything. And no mention in ASIC-README about hcards...
--enable-bab Bitfury never supported my writing the software and wouldn't even sell me hardware - so it wasn't until someone sent me a BlackArrowBitfury board that I could write and test a driver for it. The detection code and work send command is almost the same logic as chainminer - just less bugs If they've updated the code and not released (i.e. don't want anyone to support their hardware) then yeah my code won't know about the updates https://github.com/bfsb/chainminer is their code as far as I know ... Thanks, got it working, doing quite nice, only 10-15GH/s slower than what Bifury's management page says when mining with chainminer. With chainminer i have handtuned the chip speeds. 248GH/s on average (10 hours of runtime) versus 260 - 267 in chainminer. I wonder if manual tuning of those autotune parameters would bring it up. I'll let this run for a while. |
|
|
|
|
kano
Legendary
Offline
Activity: 4466
Merit: 1798
Linux since 1997 RedHat 4
|
|
February 08, 2014, 12:40:30 PM |
|
...
Just to confirm, this doesn't support Bitfury v1.2 hcards/mcard combo? Compiled with --enable-bitfury and it doesn't find anything. And no mention in ASIC-README about hcards...
--enable-bab Bitfury never supported my writing the software and wouldn't even sell me hardware - so it wasn't until someone sent me a BlackArrowBitfury board that I could write and test a driver for it. The detection code and work send command is almost the same logic as chainminer - just less bugs If they've updated the code and not released (i.e. don't want anyone to support their hardware) then yeah my code won't know about the updates https://github.com/bfsb/chainminer is their code as far as I know ... Thanks, got it working, doing quite nice, only 10-15GH/s slower than what Bifury's management page says when mining with chainminer. With chainminer i have handtuned the chip speeds. 248GH/s on average (10 hours of runtime) versus 260 - 267 in chainminer. I wonder if manual tuning of those autotune parameters would bring it up. I'll let this run for a while. The --bab-options will allow it to go higher also. Mainly the first parameter, the Max speed - it defaults to 55 but will allow up to 57 (but that depends on if your board can handle it that high also) I set the defaults to match a 'slower' BitFury board so that people who tried it didn't blow anything up without messing with options I've not actually been able to run it on my 6 board for a while now - so I don't know how well it goes with a lot more boards (the 6 board setup has been out of my hands for a couple of weeks now) It may still require some tuning (of the 'Delay' code to get the average down when there are a lot of boards) but until I have a larger board setup to test with, I can't really sort that one out. Shouldn't be too much longer. It checks each chip results roughly every 5minutes and then tunes them up or down based on HW% for that 5 min of data. default is down if >10% HW and up if <1% I do still have other ideas for tuning (and dealing with dead chips coz they use double or more CPU than a live chip) |
|
|
|
spegelius
Newbie
Offline
Activity: 52
Merit: 0
|
|
February 08, 2014, 04:59:21 PM |
|
The --bab-options will allow it to go higher also. Mainly the first parameter, the Max speed - it defaults to 55 but will allow up to 57 (but that depends on if your board can handle it that high also) I set the defaults to match a 'slower' BitFury board so that people who tried it didn't blow anything up without messing with options I've not actually been able to run it on my 6 board for a while now - so I don't know how well it goes with a lot more boards (the 6 board setup has been out of my hands for a couple of weeks now) It may still require some tuning (of the 'Delay' code to get the average down when there are a lot of boards) but until I have a larger board setup to test with, I can't really sort that one out. Shouldn't be too much longer. It checks each chip results roughly every 5minutes and then tunes them up or down based on HW% for that 5 min of data. default is down if >10% HW and up if <1% I do still have other ideas for tuning (and dealing with dead chips coz they use double or more CPU than a live chip) Had to switch to chainminer, the speed was tanking to 220Gh/s with cgminer, occasionally going higher and then back. I'll do more testing when i have more time to concentrate on tuning. |
|
|
|
|
|
