TycheCash - Cash on the Tyche Network

[tychecoin]

I don't see "TycheCash" daemon in 1.1.1.1 release for ubuntu 16.  running headless, so can't run GUI

Thanks for pointing , cli has been added to the archive.

[1713950479]

1713950479

[huymtc]

Thanks for pointing , cli has been added to the archive.

How about bringing TycheCash coin to other exchanges, such as Stocks, TradeOrge, Crex24, etc. dev?

[tychecoin]

Thanks for pointing , cli has been added to the archive.

How about bringing TycheCash coin to other exchanges, such as Stocks, TradeOrge, Crex24, etc. dev?

submit to all known exchanges give the official mail id and twitter and github , so that in case there is listing fee requirement will pay them.

[tychecoin]

Hello folks
2 things
1st BiteBTC , came to know that they keep pending the KYC , did not know it earlier paid a hefty sum for listing , our bad (may be good also , can't say) luck.
We do not endorse any exchange , have applied to tradeorge too but did not get the response , for crex24 few users said its scam so postponed that. And for trade satoshi fee is way too high to pay now .
I will prefer to pay for hitbtc instead
2nd did a lot of verbose running the daemon past 4 days and came to know a lot of pools (known and unknown , known example youpool ) running either the old code or running the daemon tweaking the config file .
And the solution is putting digital signature into the code which will take some time .
For the time the solution is using binary only hardcoded with the official specs and checks for checking authenticity .
I want ur openion on the option , whether without wait we should go with binary release with hard fork at 74000 block (discarding 946 known blocks and unknown number of unknown blocks) or U will be waiting for digital signature .

[tychecoin]

In anyways I want to assure you all it is NOT possible to include invalid blocks or transaction to the TycheCash official blockchain , but it does harm us by sucking the hash rates and blocking the blocks for several hours.

[exlover]

In anyways I want to assure you all it is NOT possible to include invalid blocks or transaction to the TycheCash official blockchain , but it does harm us by sucking the hash rates and blocking the blocks for several hours.

Hope that the network will remain as stable as possible and the price of TycheCash coin hit 10 satoshi in the future.

[tychecoin]

Tyche:
As the blocks are progressing , I am announcing planned upgrade for further difficulty and timestamp adjustment at block 75000 or 76000 . Will update here once code is pushed to GitHub. We are still 45/1045 blocks behind the upgrade.

[GoldKimber]

Could I get some advice how to proceed?

I upgraded to v1.1.1.1 for wallet...  because v1.1.1 wasn't syncing....

But new v1.1.1.1 isn't syncing for me either with the following wallet.log info:

2018-Jun-18 16:59:36.293424 WARNING [Blockchain] No actual blockchain indices for BlockchainExplorer found, rebuilding...
2018-Jun-18 16:59:36.294427 INFO [Blockchain] Height 0 of 1
2018-Jun-18 16:59:36.294427 INFO [Blockchain] Rebuilding blockchain indices took: 0.000410257
2018-Jun-18 16:59:36.295399 INFO [Blockchain] Blockchain initialized. last block: 0, d2175.h18.m59.s36 time ago, current difficulty: 1
2018-Jun-18 16:59:36.308433 INFO [node_server] Binding on 0.0.0.0:17017
2018-Jun-18 16:59:36.309473 INFO [node_server] Net service binded on 0.0.0.0:17017
2018-Jun-18 16:59:36.309473 INFO [node_server] Attempting to add IGD port mapping.
2018-Jun-18 16:59:39.335511 INFO [node_server] UPnP device was found but not recoginzed as IGD.
2018-Jun-18 16:59:39.336481 INFO [node_server] Starting node_server
2018-Jun-18 16:59:43.673145 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] **********************************************************************
2018-Jun-18 16:59:43.673145 INFO [core] The daemon will start synchronizing with the network. It may take up to several hours.
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] You can set the level of process detailization* through "set_log <level>" command*, where <level> is between 0 (no details) and 4 (very verbose).
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] Use "help" command to see the list of available commands.
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] Note: in case you need to interrupt the process, use "exit" command. Otherwise, the current progress won't be saved.
2018-Jun-18 16:59:43.673145 INFO [core] **********************************************************************
2018-Jun-18 16:59:50.204387 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 16:59:56.595387 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:02.815947 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:09.291276 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:15.833671 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds

I'm using Windows GUI Wallet.  While my balance shows up ok... my wallet doesn't seem to want to sync to the blockchain from block 1/1.
How do I proceed?

Thanks,

GK

[tychecoin]

Could I get some advice how to proceed?

I upgraded to v1.1.1.1 for wallet...  because v1.1.1 wasn't syncing....

But new v1.1.1.1 isn't syncing for me either with the following wallet.log info:

2018-Jun-18 16:59:36.293424 WARNING [Blockchain] No actual blockchain indices for BlockchainExplorer found, rebuilding...
2018-Jun-18 16:59:36.294427 INFO [Blockchain] Height 0 of 1
2018-Jun-18 16:59:36.294427 INFO [Blockchain] Rebuilding blockchain indices took: 0.000410257
2018-Jun-18 16:59:36.295399 INFO [Blockchain] Blockchain initialized. last block: 0, d2175.h18.m59.s36 time ago, current difficulty: 1
2018-Jun-18 16:59:36.308433 INFO [node_server] Binding on 0.0.0.0:17017
2018-Jun-18 16:59:36.309473 INFO [node_server] Net service binded on 0.0.0.0:17017
2018-Jun-18 16:59:36.309473 INFO [node_server] Attempting to add IGD port mapping.
2018-Jun-18 16:59:39.335511 INFO [node_server] UPnP device was found but not recoginzed as IGD.
2018-Jun-18 16:59:39.336481 INFO [node_server] Starting node_server
2018-Jun-18 16:59:43.673145 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] **********************************************************************
2018-Jun-18 16:59:43.673145 INFO [core] The daemon will start synchronizing with the network. It may take up to several hours.
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] You can set the level of process detailization* through "set_log <level>" command*, where <level> is between 0 (no details) and 4 (very verbose).
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] Use "help" command to see the list of available commands.
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] Note: in case you need to interrupt the process, use "exit" command. Otherwise, the current progress won't be saved.
2018-Jun-18 16:59:43.673145 INFO [core] **********************************************************************
2018-Jun-18 16:59:50.204387 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 16:59:56.595387 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:02.815947 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:09.291276 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:15.833671 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds

I'm using Windows GUI Wallet.  While my balance shows up ok... my wallet doesn't seem to want to sync to the blockchain from block 1/1.
How do I proceed?

Thanks,

GK

You might have tried during the time when seed nodes were being upgraded ( we moved to a dedicated server) . Try now it will work.

[GoldKimber]

Could I get some advice how to proceed?

I upgraded to v1.1.1.1 for wallet...  because v1.1.1 wasn't syncing....

But new v1.1.1.1 isn't syncing for me either with the following wallet.log info:

2018-Jun-18 16:59:36.293424 WARNING [Blockchain] No actual blockchain indices for BlockchainExplorer found, rebuilding...
2018-Jun-18 16:59:36.294427 INFO [Blockchain] Height 0 of 1
2018-Jun-18 16:59:36.294427 INFO [Blockchain] Rebuilding blockchain indices took: 0.000410257
2018-Jun-18 16:59:36.295399 INFO [Blockchain] Blockchain initialized. last block: 0, d2175.h18.m59.s36 time ago, current difficulty: 1
2018-Jun-18 16:59:36.308433 INFO [node_server] Binding on 0.0.0.0:17017
2018-Jun-18 16:59:36.309473 INFO [node_server] Net service binded on 0.0.0.0:17017
2018-Jun-18 16:59:36.309473 INFO [node_server] Attempting to add IGD port mapping.
2018-Jun-18 16:59:39.335511 INFO [node_server] UPnP device was found but not recoginzed as IGD.
2018-Jun-18 16:59:39.336481 INFO [node_server] Starting node_server
2018-Jun-18 16:59:43.673145 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] **********************************************************************
2018-Jun-18 16:59:43.673145 INFO [core] The daemon will start synchronizing with the network. It may take up to several hours.
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] You can set the level of process detailization* through "set_log <level>" command*, where <level> is between 0 (no details) and 4 (very verbose).
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] Use "help" command to see the list of available commands.
2018-Jun-18 16:59:43.673145 INFO [core]
2018-Jun-18 16:59:43.673145 INFO [core] Note: in case you need to interrupt the process, use "exit" command. Otherwise, the current progress won't be saved.
2018-Jun-18 16:59:43.673145 INFO [core] **********************************************************************
2018-Jun-18 16:59:50.204387 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 16:59:56.595387 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:02.815947 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:09.291276 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds
2018-Jun-18 17:00:15.833671 ERROR [node_server] Failed to connect to any of seed peers, continuing without seeds

I'm using Windows GUI Wallet.  While my balance shows up ok... my wallet doesn't seem to want to sync to the blockchain from block 1/1.
How do I proceed?

Thanks,

GK

You might have tried during the time when seed nodes were being upgraded ( we moved to a dedicated server) . Try now it will work.

It's working great!  Thank you!

[tychecoin]

Important Compulsory Update with new Difficulty adjustment Algo before block 76000

As announced earlier the update has been published to GitHUB https://github.com/blockchain-next/TycheCash

Update before block 76000 or else u will be blocks wont sync beyond 76000

Binaries also being pushed to https://github.com/blockchain-next/TycheCash/releases/tag/1.2

[tychecoin]

Current block Number 75555 , so 445 blocks more - approx 225 minutes to go , update and connect ur miners for first few blocks at least efforts

[fbastage2]

again, no daemon in binary gz files.

I compiled the daemon from the source files (gz), and the version still says 1.1.1.1

[mss1908]

submitted listing request to wazirx and coinome exchange. will wait for their response.

[!vanovi4]

I like that this project (TycheCash) will be the money part of the larger ecosystem of TycheNeXT (TycheNeXT is a temporary name for the upcoming ecosystem). Good luck to the development team.

[GoldKimber]

Hey Dev....

Regarding this situation seen on Pools:

 Block <085bb319eb6ca275b957b248de373b4141f3048817fc37a47571b8ec62c834fe> is too big: 50133 bytes, exptected no more than 49967 byte

Is this a limitation of the blockchain or of the mining pool software?

We think this is achieved by setting too high of a static difficulty on miners.... it is being seen coming from various miners around the world...  not all, but some...  I think it results from static diff set higher than say 6+ Million on ASICs... 

Can you change this in your code?  It is believed to be causing invalid blocks to be submitted to the pools causing some of the blockchain delays we are seeing.

What do you think?

[kostepanych2]

http://labbinarymining.com/ Is now on the new forked chain.

Stratum Address:
tyc-us.labbinarymining.com

Stratum Ports:
3444 - Low Hash Rate
5666 - Mid Hash Rate
7888 - High Hash Rate
8999 - NiceHash Type Hash Rate

Variable and Fixed Difficulty: Enabled

-- I've got a copy of the database for what miners are owed.  I'll be getting with the developer of TycheCash, and he will compensate the miners for their missing coins.

Link to the balances of each miner on LAB Binary Mining's pool at the time the fork:
https://docs.google.com/spreadsheets/d/1_8tAxgVmpMrZaeZMLqXLtZ5Jw8xVWw1MwdPQStKHCJ0/edit#gid=0

Sorry for any inconvenience!

-Xav

Have anybody received this compensation?

[GoldKimber]

Will the new binaries address this problem??  Else, we may never make it to 76,000...

I quote
"youpool.io - Today at 2:44 AM
a lot of errors from the daemon....

https://imgur.com/a/KGkYdZP "

[GoldKimber]

Current block Number 75555 , so 445 blocks more - approx 225 minutes to go , update and connect ur miners for first few blocks at least efforts

Seems stalled at 75709.... Last block 8 hours ago.

Indeed you are right.  If the new block hasn't been found by now... a day later... when there is enough hashpower and low enough diff to find a block every 28 seconds...  doesn't it suggest something else is wrong that is preventing us from finding that new block?

[whalesinc]

Blocks are still stuck. Any updates from devs?