[ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22)

[UrsaUrsa]

Same problem. When connected through Teamviewer I get full hash. When disconnected hash drops to half. This is with a monitor connected, so that cannot be the problem.

I have the same problem.

Tons of us have the same problem. I ordered some dummy plugs but at the moment I'm losing hash rate.

[1713559843]

1713559843

[1713559843]

1713559843

[1713559843]

1713559843

[1713559843]

1713559843

[1713559843]

1713559843

[HarleyQuinn2011]

Same problem. When connected through Teamviewer I get full hash. When disconnected hash drops to half. This is with a monitor connected, so that cannot be the problem.

I have the same problem.

Tons of us have the same problem. I ordered some dummy plugs but at the moment I'm losing hash rate.

And constantly reconnects

[cocopuffs99]

Same problem. When connected through Teamviewer I get full hash. When disconnected hash drops to half. This is with a monitor connected, so that cannot be the problem.

I have the same problem.

Tons of us have the same problem. I ordered some dummy plugs but at the moment I'm losing hash rate.

So I think I was able to keep the hashrate from dropping when I disconnect from Teamviewer by changing the "--set-work-batch" config to 8.

[UrsaUrsa]

Same problem. When connected through Teamviewer I get full hash. When disconnected hash drops to half. This is with a monitor connected, so that cannot be the problem.

I have the same problem.

Tons of us have the same problem. I ordered some dummy plugs but at the moment I'm losing hash rate.

So I think I was able to keep the hashrate from dropping when I disconnect from Teamviewer by changing the "--set-work-batch" config to 8.

This guy! He knows! Gimme your minex address i'll send you a tip

[cocopuffs99]

Same problem. When connected through Teamviewer I get full hash. When disconnected hash drops to half. This is with a monitor connected, so that cannot be the problem.

I have the same problem.

Tons of us have the same problem. I ordered some dummy plugs but at the moment I'm losing hash rate.

So I think I was able to keep the hashrate from dropping when I disconnect from Teamviewer by changing the "--set-work-batch" config to 8.

This guy! He knows! Gimme your minex address i'll send you a tip

Awesome! Glad it worked for you too. My minexcoin address is XaWuXNUfc156bXU6aWHiGXUstAuiveJQ7G. Thanks for the tip.  

[AndreasSantonio]

Now I have i7 7700 + GTX1060 6 pieces. If I replace the i7 7700 to a pentium G4600, will the performance decrease or not?

[ninjam]

Probably not.

[Lolliedieb]

Now I have i7 7700 + GTX1060 6 pieces. If I replace the i7 7700 to a pentium G4600, will the performance decrease or not?

With 0.21 and 0.22 the G4600 should work

[grubiorz]

Do you have any mining profit calculator? I'm wondering how much I can earn with my gpus.

[farfui]

https://bchain.info/MNX/tools/calculator

[r12x2]

R9 280X 3GB v0.21 & 0.22 is freezing or low hashing after parameter --set-work-batch more than 6, with --set-work-batch 4 gives low hashes (~6500s/S) vs v0.2 (~7000s/S)

[elektrofusion7]

Please do something for amd cards. 290x give me 7400sol/s with 6 work-batch but in optiminer I get 11k!!! 

[cocopuffs99]

Is it ok to promote new pools here?

Try http://equipool.org/#/mnxStats, currently 0% pool fees.
Server Url: equipool.org
Port #: 9999

[BigMcRat]

Can someone  help.

My MSI 1080ti gives me only 14000 sols same as my 1070 Cards it should higher than 1070?

My config:
PL- 80  clock +157 mem +710

lolMiner-mnx.exe --server mnx.suprnova.cc --port 7077 --user xxx.xxx --pass d=10240 --platform 0 --device 0,1 --set-work-batch 12 --enable-nv-hotfix

[schnaps]

I use GTX1060 (3gb) x 6 in Linux. lolminer sometimes stops working on one or two GPUs (Shows 0 sol \ s) while the GPU is loaded to 100%
What is the reason?

[Ghrand]

Can someone  help.

My MSI 1080ti gives me only 14000 sols same as my 1070 Cards it should higher than 1070?

My config:
PL- 80  clock +157 mem +710

lolMiner-mnx.exe --server mnx.suprnova.cc --port 7077 --user xxx.xxx --pass d=10240 --platform 0 --device 0,1 --set-work-batch 12 --enable-nv-hotfix

Your work batch should probably be 2 instead of 12.

[Lolliedieb]

I added --enable-time-print to the batch file of 0.22, but the time is not displayed. How can I see it?

Thats odd, it works here ...
you have it in its own line with nothing before and a whitespace after?

Else: even when using config file you can add additional parameters to command line for quick testing. Does it work then?

I use GTX1060 (3gb) x 6 in Linux. lolminer sometimes stops working on one or two GPUs (Shows 0 sol \ s) while the GPU is loaded to 100%
What is the reason?

Unknown yet. Will introduce feature to shut down miner in such situations so simple script can get it back working.

UHmm still the issue with the drop rate without TV.
If I put the set-work-batch 8, I have a drop of 4K but it is stable if I'm closing TeamViewer ...

I will try to do a fix for that with 0.3 ... well can not fix the TeamViewer behavior but have an idea why that drop when batch size is larger than 2.

[siagirl]

How to configurate bat. File for mineks O.S. windows 64x amd rx 580 8gb.

[dejan_p]

works great on a 4x1070 rig, but on a 4x1080 rig it just crashes after a few seconds

on that 1080 rig, if i mine with only one card, it works..multiple cards - fail.. if i try to run a second instance of the miner from a different bat/folder, the miner that was started first, crashes

any ideas? (v0.22)
thanks for your great work!

edit: when it crashes, i can see the following in the output window

pure virtual method called
terminate called without an active exception

[mareleki]

miner 21 and 22 is not stable, all time problem, one rig shut down other miner frezz and not respond,3rd  hash 00000 all nvidia cards.
i back on eth i not waste time