Bitcoin Forum
April 24, 2024, 02:58:25 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: 5 to 2 gpu's after windows failure  (Read 99 times)
Napalm1432 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
February 28, 2018, 08:50:00 AM
 #1

So i had 5 gpu's working and mining, when after about 30 min, windows shut down with a blue screen stating: Windows encountered a problem.
After reboot it will autostart mining, but it only recognizes 2 gpu's now.
I'm running windows 10
Aorus z370 motherboard
intel i3 processor
250gb ssd
6x AMD Radeon RX-580 (1 wasn't working anyway)
Corsair 1100 watt psu

I seemed to have this problem before, but i wasn't there to monitor it, i was able to fix it, but then while monitoring it it happened again.
1713970705
Hero Member
*
Offline Offline

Posts: 1713970705

View Profile Personal Message (Offline)

Ignore
1713970705
Reply with quote  #2

1713970705
Report to moderator
1713970705
Hero Member
*
Offline Offline

Posts: 1713970705

View Profile Personal Message (Offline)

Ignore
1713970705
Reply with quote  #2

1713970705
Report to moderator
1713970705
Hero Member
*
Offline Offline

Posts: 1713970705

View Profile Personal Message (Offline)

Ignore
1713970705
Reply with quote  #2

1713970705
Report to moderator
BitcoinCleanup.com: Learn why Bitcoin isn't bad for the environment
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1713970705
Hero Member
*
Offline Offline

Posts: 1713970705

View Profile Personal Message (Offline)

Ignore
1713970705
Reply with quote  #2

1713970705
Report to moderator
manji
Full Member
***
Offline Offline

Activity: 210
Merit: 174


BookiePro.Fun - The World's Betting Exchange


View Profile
February 28, 2018, 09:37:36 AM
 #2

you can check a cable PSU and USB Riser. but if I calculate the Power Consumption needed, your PSU not enough and lack power. Rx580 has TDP 185W x 6 = 1110W. try to using PSU 1200W or more.

varusisog
Member
**
Offline Offline

Activity: 123
Merit: 10


View Profile
February 28, 2018, 10:10:19 AM
 #3

So i had 5 gpu's working and mining, when after about 30 min, windows shut down with a blue screen stating: Windows encountered a problem.
After reboot it will autostart mining, but it only recognizes 2 gpu's now.
I'm running windows 10
Aorus z370 motherboard
intel i3 processor
250gb ssd
6x AMD Radeon RX-580 (1 wasn't working anyway)
Corsair 1100 watt psu

I seemed to have this problem before, but i wasn't there to monitor it, i was able to fix it, but then while monitoring it it happened again.

I had similar problem in another mother board. I need to turn off the power supply and restart again. See the 5 GPU again.
edwardceng
Member
**
Offline Offline

Activity: 266
Merit: 50


View Profile
February 28, 2018, 11:12:48 AM
 #4

you can try to reset CMOS, move RAM to Dimm 1 or Dimm 2, move power from PSU to another USB Riser (detect if Riser is broken) and make sure you using latest driver AMD.

Turkish88
Full Member
***
Offline Offline

Activity: 714
Merit: 104



View Profile
February 28, 2018, 11:16:26 AM
 #5

try disconnect temporary 1 gpu, by this way you can check power of your PSU.
If rig working fine with 4 gpu then replace supply with more power

Help to Ukrainian citizens
ETH donations adress - 0xe23CB47AC32F0b8750d4D0Dd4e160Fa6F8fF30EF
GazWales
Newbie
*
Offline Offline

Activity: 28
Merit: 0


View Profile
February 28, 2018, 03:27:45 PM
 #6

I had the same issue last week... has there been a windows update on your rig recently? Sometimes updates drives and if your card is modded will need to run Pixel patcher again.
Maybe check in Bios that cards are detected there - will help determine if its a Hardware issue, card,riser,cable or software issue..

To resole my issue i could see the cards are detected in Bios, so i ran DDU, shutdown, made sure all power drained from system (On off button few times with no cable connected) - might be overkill might not?
Restarted reinstalled drivers, run Pixel patcher reboot and everything was ok...

HTH
chandrarahmadewa
Member
**
Offline Offline

Activity: 308
Merit: 49


View Profile
March 01, 2018, 11:58:40 AM
 #7

So i had 5 gpu's working and mining, when after about 30 min, windows shut down with a blue screen stating: Windows encountered a problem.
After reboot it will autostart mining, but it only recognizes 2 gpu's now.
I'm running windows 10
Aorus z370 motherboard
intel i3 processor
250gb ssd
6x AMD Radeon RX-580 (1 wasn't working anyway)
Corsair 1100 watt psu

I seemed to have this problem before, but i wasn't there to monitor it, i was able to fix it, but then while monitoring it it happened again.

with PSU 1100w for RX type, that's enough.

Is your Bios vga already modified? If it has been modified, try to use the application "atikmdag-patcher". so that the GPU has been modified its BIOS can be read.
Napalm1432 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
March 07, 2018, 10:59:52 AM
 #8

Alright so i had some more help outside, just for future reference i'll describe what was wrong, and what solved it.
First off, the power supplly was indeed insufficient, so i'm adding a 2nd one, this should solve the cards failing.
Besides that, i had a monitor hooked up to internal graphics, this seemed to cause problems, so instead i'm now using a gpu for the display, which made one more card work.
With that fixed i can manage to get all 6 cards working!
RYXES
Member
**
Offline Offline

Activity: 140
Merit: 10

Merit me or don't.


View Profile
March 07, 2018, 01:10:54 PM
 #9

Alright so i had some more help outside, just for future reference i'll describe what was wrong, and what solved it.
First off, the power supplly was indeed insufficient, so i'm adding a 2nd one, this should solve the cards failing.
Besides that, i had a monitor hooked up to internal graphics, this seemed to cause problems, so instead i'm now using a gpu for the display, which made one more card work.
With that fixed i can manage to get all 6 cards working!

You're right PSU is is too low yeah but if undervolt your GPUs to 850mV it should work without another PSU.

85W x 6 GPUs = 510W which is fine. Give that a go without an additional PSU and you may save some pennies.

Merit me or don't.
Napalm1432 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
March 07, 2018, 01:15:12 PM
 #10

well, i'm still planning on overcloking the gpu's, so with that in mind the second power supply is not a bad idea (btw electricity is a fixed amount included in the rent, so not too concerned with energy efficiency)
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!