Bitcoin Forum
March 28, 2024, 12:17:53 PM *
News: Latest Bitcoin Core release: 26.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: Antiminer S9 hashboard alive but NOT mining  (Read 170 times)
MinerMEDIC (OP)
Member
**
Offline Offline

Activity: 166
Merit: 82

EET/NASA intern 2013 Bitmain/MicroBT/IPC cert


View Profile
March 01, 2018, 08:12:18 PM
Last edit: March 01, 2018, 08:27:14 PM by frodocooper
 #1

I just repaired a old 550M hashboard with a dead ASIC that was killing the clock to most of the board. I basically bypassed the whole voltage domain that the bad ASIC was in. Now I have clock to all domains but it wont start hashing.  Its being recognized now as a 60 ASIC board in status with all 'ooo...' but will not begin hashing. These little weird things are killing me! See Data below.
I HAVE:
1.tested PWS with 40A dummy load...OK.
2.tested FET output with same dummy load...OK
3.did IP reporter reset
4.updated to latest firmware
https://i.imgur.com/5AX3PLx.jpg

Code:
[   33.047661] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   33.053763] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 806c844162bb8854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x00000080
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[7] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:32] [63:22] [63:19] [63:255] [63:255]
chain[7] has no freq in PIC! Will use default freq=550 and jump over...
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[7] temp offset record: 62,-86,0,0,0,0,0,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 1, total chain num = 1
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1475 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 1657 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 806c844162bb8854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[5] speed=6000
get fan[2] speed=5880
get fan[5] speed=6000
get fan[2] speed=5880
get fan[5] speed=6000
chain[7]: [63:22] [63:5] [63:24] [63:32] [63:22] [63:19] [63:255] [63:255]
Check chain[7] PIC fw version=0x03
Chain[J8] orignal chain_voltage_pic=6 value=940
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J8] has 60 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 60 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 60 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 60 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 60 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 60 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 60 asic
Chain[J8] has no freq in PIC, set default freq=550M
Chain[J8] has no core num in PIC
read PIC voltage=940 on chain[7]
Chain:7 chipnum=60
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=550
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550
Chain:7 max freq=550
Chain:7 min freq=550


Miner fix freq ...
read PIC voltage=940 on chain[7]
Chain:7 chipnum=60
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=550
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550
Chain:7 max freq=550
Chain:7 min freq=550

max freq = 550
set baud=1
Chain[J8] set working voltage=940 [6]
do heat board 8xPatten for 1 times
start send works on chain[7]
get send work num :57456 on Chain[7]
wait recv nonce on chain[7]
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=00 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=00 asic[07]=00
asic[08]=00 asic[09]=00 asic[10]=00 asic[11]=00 asic[12]=00 asic[13]=00 asic[14]=00 asic[15]=00
asic[16]=00 asic[17]=00 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=00 asic[22]=00 asic[23]=00
asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00
asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00
asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00
asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00
asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=00
core[000]=0 core[001]=0 core[002]=0 core[003]=0 core[004]=0 core[005]=0 core[006]=0 core[007]=0 core[008]=0 core[009]=0 core[010]=0 core[011]=0 core[012]=0 core[013]=0 core[014]=0 core[015]=0 core[016]=0 core[017]=0 core[018]=0 core[019]=0 core[020]=0 core[021]=0 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[057]=0 core[058]=0 core[059]=0 core[060]=0 core[061]=0 core[062]=0 core[063]=0 core[064]=0 core[065]=0 core[066]=0 core[067]=0 core[068]=0 core[069]=0 core[070]=0 core[071]=0 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0

asic[01]=00
core[000]=0 core[001]=0 core[002]=0 core[003]=0 core[004]=0 core[005]=0 core[006]=0 core[007]=0 core[008]=0 core[009]=0 core[010]=0 core[011]=0 core[012]=0 core[013]=0 core[014]=0 core[015]=0 core[016]=0 core[017]=0 core[018]=0 core[019]=0 core[020]=0 core[021]=0 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[057]=0 core[058]=0 core[059]=0 core[060]=0 core[061]=0 core[062]=0 core[063]=0 core[064]=0 core[065]=0 core[066]=0 core[067]=0 core[068]=0 core[069]=0 core[070]=0 core[071]=0 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0

asic[02]=00
...((((02-60omitted)))
asic[61]=00
core[000]=0 core[001]=0 core[002]=0 core[003]=0 core[004]=0 core[005]=0 core[006]=0 core[007]=0 core[008]=0 core[009]=0 core[010]=0 core[011]=0 core[012]=0 core[013]=0 core[014]=0 core[015]=0 core[016]=0 core[017]=0 core[018]=0 core[019]=0 core[020]=0 core[021]=0 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[057]=0 core[058]=0 core[059]=0 core[060]=0 core[061]=0 core[062]=0 core[063]=0 core[064]=0 core[065]=0 core[066]=0 core[067]=0 core[068]=0 core[069]=0 core[070]=0 core[071]=0 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0

asic[62]=00
core[000]=0 core[001]=0 core[002]=0 core[003]=0 core[004]=0 core[005]=0 core[006]=0 core[007]=0 core[008]=0 core[009]=0 core[010]=0 core[011]=0 core[012]=0 core[013]=0 core[014]=0 core[015]=0 core[016]=0 core[017]=0 core[018]=0 core[019]=0 core[020]=0 core[021]=0 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[057]=0 core[058]=0 core[059]=0 core[060]=0 core[061]=0 core[062]=0 core[063]=0 core[064]=0 core[065]=0 core[066]=0 core[067]=0 core[068]=0 core[069]=0 core[070]=0 core[071]=0 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0



freq[00]=550 freq[01]=550 freq[02]=550 freq[03]=550 freq[04]=550 freq[05]=550 freq[06]=550 freq[07]=550
freq[08]=550 freq[09]=550 freq[10]=550 freq[11]=550 freq[12]=550 freq[13]=550 freq[14]=550 freq[15]=550
freq[16]=550 freq[17]=550 freq[18]=550 freq[19]=550 freq[20]=550 freq[21]=550 freq[22]=550 freq[23]=550
freq[24]=550 freq[25]=550 freq[26]=550 freq[27]=550 freq[28]=550 freq[29]=550 freq[30]=550 freq[31]=550
freq[32]=550 freq[33]=550 freq[34]=550 freq[35]=550 freq[36]=550 freq[37]=550 freq[38]=550 freq[39]=550
freq[40]=550 freq[41]=550 freq[42]=550 freq[43]=550 freq[44]=550 freq[45]=550 freq[46]=550 freq[47]=550
freq[48]=550 freq[49]=550 freq[50]=550 freq[51]=550 freq[52]=550 freq[53]=550 freq[54]=550 freq[55]=550
freq[56]=550 freq[57]=550 freq[58]=550 freq[59]=550 freq[60]=550 freq[61]=550 freq[62]=550

total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[7]
Done read temp on Chain[7]
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=770



(Moderator's note: This post was edited by frodocooper to remove inline image tags.)

---Hi, I'm Juergen "Jay" & I TEACH and REPAIR ASIC HASHBOARDS-- Purdue AS EET -- MinerMEDIC is NOW FREELANCE in Chicago!
1711628273
Hero Member
*
Offline Offline

Posts: 1711628273

View Profile Personal Message (Offline)

Ignore
1711628273
Reply with quote  #2

1711628273
Report to moderator
The network tries to produce one block per 10 minutes. It does this by automatically adjusting how difficult it is to produce blocks.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
ccgllc
Copper Member
Full Member
***
Offline Offline

Activity: 658
Merit: 101

Math doesn't care what you believe.


View Profile
March 01, 2018, 08:26:37 PM
 #2

FWIW - I've see variable frequency cards do the same thing.  Power cycling sometimes helps... for a little while.

Mined for a living since 2017.  Dabbled for years before that.
Linux admin since 0.96 kernel and Slackware distributions on (4) floppies...
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!