What am I doing wrong ? Claymore Cryptonote miner

[miner2k18]

I was trying to setup and test mine some Monero but when I run the Claymore miner I get the red "Unknown option" errors for everything in my config file.

Here is what my config file looks like below, what exactly do I have setup wrong ? Thanks


setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

-o stratum+tcp://pool.supportxmr.com:5555
-u 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw
-p amac1

#-allpools 1
#-tt 75

[1714581107]

1714581107

[1714581107]

1714581107

[1714581107]

1714581107

[1714581107]

1714581107

[1714581107]

1714581107

[fapar]

You have the address of the wallet you copy some reason a space appears between the 1p and UP. And if to start the miner on the basis of config that problems aren't present.

[leonix007]

I was trying to setup and test mine some Monero but when I run the Claymore miner I get the red "Unknown option" errors for everything in my config file.

Here is what my config file looks like below, what exactly do I have setup wrong ? Thanks


setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

-o stratum+tcp://pool.supportxmr.com:5555
-u 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw
-p amac1

#-allpools 1
#-tt 75

If you are Using V11.2 try this in your .bat file

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool stratum+tcp://pool.supportxmr.com:5555 -xwal 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw -xpsw x

[miner2k18]

Tried that doesn't seem to work still here is the messages I'm getting now. And yeah I'm using 11.2

https://imgur.com/a/2f9ei

Also before those messages in the image it says "uknown option 1pUPLD2KgFGqZfcw"

I was trying to setup and test mine some Monero but when I run the Claymore miner I get the red "Unknown option" errors for everything in my config file.

Here is what my config file looks like below, what exactly do I have setup wrong ? Thanks


setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

-o stratum+tcp://pool.supportxmr.com:5555
-u 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw
-p amac1

#-allpools 1
#-tt 75

If you are Using V11.2 try this in your .bat file

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool stratum+tcp://pool.supportxmr.com:5555 -xwal 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw -xpsw x

[theodrim]

Also before those messages in the image it says "uknown option 1pUPLD2KgFGqZfcw"

That is because you have space between 1p and UP in your address, just like fapar said.

Also if you are using config (and not batch file) you don't need setx there.

[miner2k18]

Also before those messages in the image it says "uknown option 1pUPLD2KgFGqZfcw"

That is because you have space between 1p and UP in your address, just like fapar said.

Also if you are using config (and not batch file) you don't need setx there.

I don't know why that address had a space in it when I post it here but that's not the case in my config or bat file.

This is what I'm trying right now in my bat file, when I run it it says no pool specified. But when I do it in my config file it works but then the setx options don't work. What am I doing wrong ?

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe

-xpool stratum+tcp://pool.supportxmr.com:5555
-xwal 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw
-xpsw amac1

[senseless]

Also before those messages in the image it says "uknown option 1pUPLD2KgFGqZfcw"

That is because you have space between 1p and UP in your address, just like fapar said.

Also if you are using config (and not batch file) you don't need setx there.

I don't know why that address had a space in it when I post it here but that's not the case in my config or bat file.

This is what I'm trying right now in my bat file, when I run it it says no pool specified. But when I do it in my config file it works but then the setx options don't work. What am I doing wrong ?

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe

-xpool stratum+tcp://pool.supportxmr.com:5555
-xwal 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw
-xpsw amac1

If it's not a space then it's some non-utf8 character.

[theodrim]

Also before those messages in the image it says "uknown option 1pUPLD2KgFGqZfcw"

That is because you have space between 1p and UP in your address, just like fapar said.

Also if you are using config (and not batch file) you don't need setx there.

I don't know why that address had a space in it when I post it here but that's not the case in my config or bat file.

This is what I'm trying right now in my bat file, when I run it it says no pool specified. But when I do it in my config file it works but then the setx options don't work. What am I doing wrong ?

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe

-xpool stratum+tcp://pool.supportxmr.com:5555
-xwal 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr 1pUPLD2KgFGqZfcw
-xpsw amac1

If you are using batch file your options must be all in one line, so your batch file will look like this (assuming right address):

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool stratum+tcp://pool.supportxmr.com:5555 -xwal 46CFwArdiEa7yVSTTLSnLgXfb2WHNUD7TSbCJMpru71iHkrHeGii2FWJQe49yLhbXMc3EaSfeNsnmfr1pUPLD2KgFGqZfcw -xpsw amac1

Also if you set your variables with setx once, you don't need to set them over and over (i.e. you don't need them anymore, and can just use both config file or batch file without them. And I'm sure they _can't_ be used in config file anyway).

[miner2k18]

Ok I got it working but I have a new problem now im only getting 415 h/s with my RX 570 ? It's my understanding even a "slow" stock RX 570 with bad memory should be getting higher than that. Mine is bios flashed and overclocked with elpida memory. It gets 29 mh/s in ETH and 310 sols for zcash so i think i should be getting double this hashrate or more in monero right ?

For example I get 700 h/s mining Monero in Minergate software so yeah...

[theodrim]

Change clocks and find more optimal one for monero. Also 'bios flashed' says nothing about how was your timings adjusted (i.e. you used some known good one or just copy yours from 1500 and up). Also you may need to tweak some settings in miner or use another miner altogether. Tweak all the things.

[miner2k18]

Change clocks and find more optimal one for monero. Also 'bios flashed' says nothing about how was your timings adjusted (i.e. you used some known good one or just copy yours from 1500 and up). Also you may need to tweak some settings in miner or use another miner altogether. Tweak all the things.

I created custom timings bios with polaris I followed other peoples directions and I'm happy with results. Like I said for a RX 570 the speeds im getting in ETH and ZCASh are on the high end of results. There is no reason for Cryptonote to be so low with them so high. Like I said I'm getting 700+ h/s for Monero in MINERGATE software that i all you need to know.